Cisco Unified CM Administration

I am just fresh in voice... i just installed Cisco Unified CM Administration but i have problem with that installation my problem is
Cisco Unified CM Administration web page is not lunched after i type the ip address in the web browser after i use to type the ip address the following message it use to come instead of ” Cisco Unified CM Administration web page ”

Cisco Systems
Accessing Cisco 3725 “Router”
Show diagnostic log – display the diagnostic log.
Monitor the router – HTML access to the command line interface at level 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15

Show tech-support – display information commonly needed by tech support.
Extended Ping – Send extended ping commands.

QoS Device Manager – Configure and monitor QoS through the web interface.

——————————————————————————–
Plz any solution

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

sieff

It looks like you typing in the IP for your 3725 voice gateway router and not the IP for CUCM. The CUCM URL will be https://X.X.X.X/ccmadmin

mohafadhil

thanx for reply previous problem is alright now, it was because i use to type the ip address without ccmadmin....................
now after i type http//x.x.x.x/ccmadmin the "Internet Explorer cannot display the webpage"
Thanx Alot

tokhss

you shouldnt have to type in ccmadmin.. but if thats the ony way it works for then let it be..

aaaa2209

sieff wrote: »

It looks like you typing in the IP for your 3725 voice gateway router and not the IP for CUCM. The CUCM URL will be https://X.X.X.X/ccmadmin

Just want to make sure, the IP is the CUCM's IP, not the router? That's the CUCME's IP based the output from the first post.