gateway configuration in this scenario.
johnifanx98
Member Posts: 329
in CCNA & CCENT
router 0 and router 1 are connected in an Ethernet via a switch. And another two hosts are in the same subnet in between. My question is which router should be used as the gateway of the router?
Or, no hosts should be added in the in-between ethernet at all?
Or, no hosts should be added in the in-between ethernet at all?
Comments
-
TurK-FX
Member Posts: 174
Well. i am not pro, i am ICND1 level almost ready to take the exam. But it looks like you should not be adding a host there. You can add a switch to R0 or R1 ethernet 2 interface and add an IP, so you can use that ip as default gateway for the switch. You can connect those two router together without a switch. But make sure to use crossover cable.WGU classes: Transferred -> AGC1, CLC1, TBP1, CJC1, BVC1, C278, CRV1, IWC1, IWT1, C246, C247, C132, C164, INC1, C277. Appealed -> WFV1 and C393.
What is Left to take - > EUP1, EUC1, C220, C221, BNC1, GC1, C299, CTV1, DJV1, DHV1, CUV1, CJV1, TPV1, C394
Currently Studying -> CCNA security (Designing Customized Security & Security)