CCENT Lab Questions
DanGood
Member Posts: 5 ■□□□□□□□□□
in CCNA & CCENT
Hi All,
New poster here. I've finally booked iCND1 for mid December after taking the course 18 months ago and not doing much since. I'm fortunate to get hands on with Cisco kit on a regular basis such as ASA 5510/20's and basic switch admin but really want to up my game now, so studying a fair amount. Have the Wendell book, ICND1 material from the course including simulator, CBT Nuggets and also lucky enough to have some kit from work I can set up as a lab. This is where my questions are...
i have the following:
2 x 2611 routers
1 x 2811 router
1 x 3750 switch
3 x 2950 switches
both 2611 have 1 serial port cards in
All the above have config on so I'd like to put them back to factory spec, I'd like to get some pointers ideally on how to do this and set the above up for an ideal ccent/ccna lab. Anyone have any step by steps or websites they can point me to for any additional reading?
many thanks in advance
Dan
New poster here. I've finally booked iCND1 for mid December after taking the course 18 months ago and not doing much since. I'm fortunate to get hands on with Cisco kit on a regular basis such as ASA 5510/20's and basic switch admin but really want to up my game now, so studying a fair amount. Have the Wendell book, ICND1 material from the course including simulator, CBT Nuggets and also lucky enough to have some kit from work I can set up as a lab. This is where my questions are...
i have the following:
2 x 2611 routers
1 x 2811 router
1 x 3750 switch
3 x 2950 switches
both 2611 have 1 serial port cards in
All the above have config on so I'd like to put them back to factory spec, I'd like to get some pointers ideally on how to do this and set the above up for an ideal ccent/ccna lab. Anyone have any step by steps or websites they can point me to for any additional reading?
many thanks in advance
Dan
Comments
-
JeanM
Member Posts: 1,117
For ICND1 you don't need to do anything crazy. Reset the devices to factory default,clear the passwords/configs.2015 goals - ccna voice / vmware vcp. -
Ltat42a
Member Posts: 587 ■■■□□□□□□□
If you're looking for Labs, check out the Lab Gear info in my Sig below.
hth -
Death Dream
Member Posts: 149
To me, it sounds like he is asking how to reset his device back to factory settings. Not what equipment he should get.
Routers
Password Recovery Procedure for the Cisco 2600 and 2800 Series Routers - Cisco Systems
Switches
Cisco Catalyst Fixed Configuration Layer 2 and Layer 3 Switches - Cisco Systems -
FloOz
Member Posts: 1,614 ■■■■□□□□□□
Check out this lab book. Good for both CCENT/CCNA prep. I have been using it the past week and am really liking it.
101 Labs for the Cisco CCNA Exam: Paul W Browning,Farai Tafa,Stuart Juggins: 9780955781520: Amazon.com: Books -
Death Dream
Member Posts: 149
Check out this lab book. Good for both CCENT/CCNA prep. I have been using it the past week and am really liking it.
101 Labs for the Cisco CCNA Exam: Paul W Browning,Farai Tafa,Stuart Juggins: 9780955781520: Amazon.com: Books
For a second, I was blown away at the $84 price point... eeek. But the kindle edition is only $10! Hell, I picked that up! Thanks for the link
-
Ltat42a
Member Posts: 587 ■■■□□□□□□□
My Lab Gear info also has Lab workbooks (Free & Paid) that has scenarios in them for CCENT/CCNA. You can use live gear or simulators/emulators (listed there too).
hth
