Cisco UCS C210 setup didn't find any hard disk drive!
Hey dudes, at work we are trying to install a software on this machine. it boots successfully. No power issue. No memory issue. However, when it comes to windows setup on the blue screen, it displays error message "setup didnt find any hard disk drive"
even though hdd meets the requirements and displays solid green.
what could be the problem?
even though hdd meets the requirements and displays solid green.
what could be the problem?
Monster PC specs(Packard Bell VR46) : Intel Celeron Dual-Core 1.2 GHz CPU , 4096 MB DDR3 RAM, Intel Media Graphics (R) 4 Family with IntelGMA 4500 M HD graphics. 
5 year-old laptop PC specs(Toshiba Satellite A210) : AMD Athlon 64 x2 1.9 GHz CPU, ATI Radeon X1200 128 MB Video Memory graphics card, 3072 MB 667 Mhz DDR2 RAM. (1 stick 2 gigabytes and 1 stick 1 gigabytes)
5 year-old laptop PC specs(Toshiba Satellite A210) : AMD Athlon 64 x2 1.9 GHz CPU, ATI Radeon X1200 128 MB Video Memory graphics card, 3072 MB 667 Mhz DDR2 RAM. (1 stick 2 gigabytes and 1 stick 1 gigabytes)
Comments
-
meadIT
Member Posts: 581 ■■■■□□□□□□
Is it running under the UCS manager or standalone? Did you go into the RAID card settings and configure a virtual disk?
Edit: If you have set up a virtual disk, Windows probably doesn't have the drivers for the RAID card you're using by default. You'll have to slipstream them into your installation media or present them during the Windows installation.CERTS: VCDX #110 / VCAP-DCA #500 (v5 & 4) / VCAP-DCD #10(v5 & 4) / VCP 5 & 4 / EMCISA / MCSE 2003 / MCTS: Vista / CCNA / CCENT / Security+ / Network+ / Project+ / CIW Database Design Specialist, Professional, Associate