Switch boot meesage

I appreciate this isnt a support forum. but I was doing my switch labs, and my 3750 got corrupt (power went off in the middle of putting an image on it)

wondered if anyone had come accross this:

done.
Loading "flash:c3750-ipbase-mz.122-25.SEE3/c3750-ipbase-mz.122-25.SEE3.bin"...flash:c3750-ipbase-mz.122-25.SEE3/c3750-ipbase-mz.122-25.SEE3.bin: no such file or directory

Error loading "flash:c3750-ipbase-mz.122-25.SEE3/c3750-ipbase-mz.122-25.SEE3.bin"

Interrupt within 5 seconds to abort boot process.
Boot process failed...

The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.

i cannot xmodem or send my image via terterm, it does nothing. the "load_helper" isnt recognized either.. the directory of FLASH is empty when I
show it:

List of filesystems currently registered:

flash[0]: (read-write)
vb[1]: (read-write)
bs[2]: (read-only)
xmodem[3]: (read-only)
null[4]: (read-write)
any tips?

Find more posts tagged with

Comments

EdTheLad

Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image - Cisco

websponge

Yeah, I tried that. It won't send the bin file. No messages, just does nothing and the load helper command isn't recognised..

EdTheLad

Start a terminal log, reload the switch, run through the the recovery procedure and paste the log in the thread.

websponge

cheers all, got it sorted, installed via TFTP, xmodem was soooo flakey!