cisco 1200

ved4082ved4082 Member Posts: 2 ■□□□□□□□□□
I am trying to configure cisco 1200 aironet version 12.3(7)JX.When I am connecting this device to end user with a cross cable...I am not able to get the Ip adress of this acess point..

Comments

  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    Is this a new or "used" access point?

    The AP will request an IP through DHCP. If that PC on the other end of the crossover cable isn't a DHCP server, then the AP may not have an IP address. If it was previously configured, then you may need a "scanner" to find the IP it's using. That link is to the Frequently Asked Questions (and includes the cable information for connecting through the console port).

    You can find the Cisco Aironet 1200 Series Configuration Guides here if you need them.

    Instruction on how to reset the AP to the default configuration and Configuring the Access Point for the First Time are here
    :mike: Cisco Certifications -- Collect the Entire Set!
Sign In or Register to comment.