ISDN

I am having trouble remembering how to config DDR, PRI interfaces and Dialer interfaces.
does anyone have any helpful links that might make this whole topic easier to digest?

I have done several excercise and read all of my study material over and over. I understand the basics behind what each command is doing but I cant remember it all to do a full config myself.

I am having a similar issue with configuring a dynamic nat pool too.

my exam is on friday!!

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

Netstudent

Maybe you could devote the extra review time to more relevant topics. ISDN is fading out from the CCNA. You may see some of it on the old test, but it would be the basics at best. I think if you put that much time into ISDN, it may be overkill. If you have trouble with NAT, then study it untill you got it because that definately is part of the CCNA.

techster79

I agree, I took the test Monday and I can tell you ISDN is not a major focus. I would concentrate on frame relay, NAT, ACL, VLAN, VTP, STP, subnetting, and the usual but don't sweat ISDN.

fonque

sweet, I got the basics down at least.

Only areas where I know I need to review are STP(and its flavors), VLSM (a bit), and NAT.

NAT though, I dont have any problem understanding the concepts or order, I just have issues remembering the actual commands and their syntax.

andyt

remember you can use ? on the simulations as well if you get stuck
taking at 10.30am tomorrow, last bit of revision for me,
not optimistic on passing though

miller811

andyt wrote:

remember you can use ? on the simulations as well if you get stuck
taking at 10.30am tomorrow, last bit of revision for me,
not optimistic on passing though

Man, you got to stay positive, you are going in there to pass the test, not pass them $150.

You can do it.