nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

CME CALLMANAGER COMMUNICATION

antonyice1

HI Guys,

Yesterday I had a pblm.I was trying to make the communication between cme and callmanager 4.1.
i was able to make tha calls from callmanager registered phones to the cme registered phones.but the phones registered to cme are not able to talk to the ccm registered phones.I have reistered cme as an h323 g/w on ccm and gateway at the ccm site as an mgcp g/w.

This was the dial-peer that i wrote on cme to point to ccm .

dial-peer voice 1 voip
destination-pattern 5...
session target 10.0.0.75(ccm's ip)

Do i need any other configuration on the cme ?

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

mikej412

antonyice1 wrote:

I have reistered cme as an h323 g/w on ccm and gateway at the ccm site as an mgcp g/w.

Integrating Cisco Unified CallManager Express with Cisco Unified Call Manager

antonyice1

thank u for the link . but i was looking for any configurations that i should do and the link doenot have any configuration informations.

mikej412

From the Cisco Unified Communications Manager Express System Administrator Guide
-- Enabling Interworking with Cisco Unified Communications Manager