2511 & ssh?
Greetings-
Can anyone advise what IOS specific version I can use in order to
implement ssh on my 2511? I believe ssh was added to 12.2 and
up, but I can't enable it when issuing the 'transport input'
command. I wonder if this is a hardware limitation...
Thanks in adv.
Can anyone advise what IOS specific version I can use in order to
implement ssh on my 2511? I believe ssh was added to 12.2 and
up, but I can't enable it when issuing the 'transport input'
command. I wonder if this is a hardware limitation...
Thanks in adv.
Lab first, ask questions later
Comments
-
qplayed
Member Posts: 303
here's a good place to start http://tools.cisco.com/ITDIT/CFN/jsp/index.jspIf you cannot express in a sentence or two what
you intend to get across, then it is not focused
well enough.
—Charles Osgood, TV commentator -
seraphus
Member Posts: 307
qplayed wrote:here's a good place to start http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
The 2511 isn't in the Platform drop down after searching SSH features,
but thanks.Lab first, ask questions later -
mikej412
Member Posts: 10,086 ■■■■■■■■■■
The SSH client requires you to have an IPSec (DES or 3DES) encryption software image -- on a 2500 that would be one of the 12.2 Enterprise Plus Crypto versions.
Search by platform.
Enterprise/FW PLUS IPSEC 56 has client support for SSH v1
Since the 2500 only supports version 1, if you search by feature, search for Secure Shell SSH Version 1 Integrated Client -- then then you get 2501-2525 as a platform selection. That would give you the complete choice of 2500 IOSs with SSH v1 support. That shows that there are also IP Plus and IP/FW Plus versions that also support it.
Did you complete the prerequisites? Set the host name, set the domain name, generate the key.:mike: Cisco Certifications -- Collect the Entire Set! -
seraphus
Member Posts: 307
mikej412 wrote:The SSH client requires you to have an IPSec (DES or 3DES) encryption software image -- on a 2500 that would be one of the 12.2 Enterprise Plus Crypto versions.
Search by platform.
Enterprise/FW PLUS IPSEC 56 has client support for SSH v1
Since the 2500 only supports version 1, if you search by feature, search for Secure Shell SSH Version 1 Integrated Client -- then then you get 2501-2525 as a platform selection. That would give you the complete choice of 2500 IOSs with SSH v1 support. That shows that there are also IP Plus and IP/FW Plus versions that also support it.
Did you complete the prerequisites? Set the host name, set the domain name, generate the key.
Thanks. No, I was unable to under the three IOS versions I tried.
(I am at work now, so I don't have those handy for verification).
I will load another IOS, and try this link again. Thank you both.
http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtmlLab first, ask questions later