X-Lite with Call Manager 6.0.1

alicic

Hi,

I have installed call manger 6.0.1 on VmWare workstation and it is just working perfectly. I am trying to register X-lite SIP Softphone with it, but did not have to much luck

Had anybody managed to do so,

Please post your experience with Call Manager 6.0.1

regards

Luckycharms

Can you give a little more information... any logs or anything?? I know that client has a logging function and CCM 6 is full of logs that describe the registration process... thanks...

mikej412

Luckycharms wrote:

Can you give a little more information...

Yeah -- more information. What were your configuration step on CallManager? What were your settings on X-Lite.

X-Lite worked with CallManager 5.1, I haven't had time to try it with 6.x.

satriaindonesia

hello...guys, i new member in this forum,
I want to share for all, about setting X-lite in CallManager 6xxx.

For setting X-lite in CallManager 6xxx no different with Setting in CallManager 5xxx
I Give examples :

X-lite extension : 78888

Select Menu : User Management ->End User->Add New :
User ID: 78888
Password: 78888 (you can anythings)
Confirm Password: 78888 (you can anythings)
PIN: 78888 (you can anythings)
Confirm PIN: 78888 (you can anythings)
Last Name: 78888

And You Save.

Next Your Select Menu : Device -> Phone -> Add New
Select Product type : Third-party SIP Device (Basic) -> Next
MAC Address* : (your MAC PC/laptop)
Decription: SEP(your MAC PC/laptop)
Device Pool*:Default
Phone Buttom Template*:Third-party SIP Device (Basic)
Common Phone Profile : Standard Common Phone Profile(default)
Location : Hub_None (Default)

PROTOCOL SPECIFIC INFORMATION :
Presence Group : Standard Presence Group (Default)
MTP Preferred Originating Codec : 711Ulaw (gray)
Device Security Profile : Third-party SIP Device Basic-Standard SIP non-Secure Profile
SIP Profile : Standard SIP Profile
Digest User : 78888

And you Save
"Click on the Reset Phone Button to have the Changes take Effect" --> Select OK

In left line : "line[1]-Add a New DN"
Directory Number* : 78888
and you Save

And Your Select Againt Menu : User Management -> End User
Click in 78888 and click in "Device Association" -> Directory Number, Begin With 78888 -> Find
and Check SEPSEP(your MAC PC/laptop) and then your click SAVE SELECTED/CHANGES

In X-Lite Setting :
Open Menu : Properties of Account
User Details : 78888
User Name : 78888
Password : 78888
Authorization User Name : 78888
Domain : ip Add CM

Domain Proxy :
Check "Register With Domain and Receive Incoming Calls"
Send Outbound Via :
Check "Domain"

Good Luck


Best Regards

Satria Indonesia

mikej412

satriaindonesia wrote:

For setting X-lite in CallManager 6xxx no different with Setting in CallManager 5xxx

I expected as much -- thanks for the confirmation!

Welcome to the Forum!

Luckycharms

Yes, welcome...and good explanation.

alicic

Thanx for the explanation. I was close to it, thanx any how

welcome to forum

jcrrocha

Hi guys, I am having problems configuring Polycom IP330 SIP phones in CallManager 6xx.

I can configure a X-lite SIP extension in CallManager 6xx with no problem, and it works fine, but when I configure the Polycom IP330 SIP phone in CallManager I get rejected message from the status in CallManger.

Any one can help me to get the Polycom IP330 to work in CallManager?

Best Regards

sadeghi

hi friends
I Ran your instruction about "X-lite With Call Manager 6.0.1 "
But I dont get desirable result
I Get "Registration error:408-Request Timeout" from X-lite ver 3.0
Server IP : 172.16.16.16
Client IP : 172.16.16.20
Connection between Client & Server have not any Problem and
Ping Reply :::