2611 Router not retaining startup-config
jbaello
Member Posts: 1,191 ■■■□□□□□□□
in CCNA & CCENT
After working on the router and saving my running-config, as soon I reset the router it's asking me if I want to go to setup mode, it looks like the memory that's holding out the startup is not retaining it, any issue what might be causing this? I will upgrade the IOS and see if that fixes it.
Comments
-
jmc012 Member Posts: 134jbaello wrote:After working on the router and saving my running-config, as soon I reset the router it's asking me if I want to go to setup mode, it looks like the memory that's holding out the startup is not retaining it, any issue what might be causing this? I will upgrade the IOS and see if that fixes it.
See if your configuration register is set to0x2102 when you do a #show version. If not, change it to that. That is the default value that will let it boot normally. -
jbaello Member Posts: 1,191 ■■■□□□□□□□If I am not mistaken I believe I changed the config register when I was playing with the router, let me try that.
-
/usr Member Posts: 1,768 ■■■□□□□□□□I had this exact same problem on a few routers and it ended up being the config register...