Options
packet tracer frame relay issue
jjbrog
Member Posts: 149
in CCNA & CCENT
Could someone point me to an example of frame relay via packet tracer(using subinterfaces)? I'm 110% confident in what I got going on on the router side of things(right dlci etc, etc, worked on the real equipment in class)its that cloud thing I think is kinda flingy. Or if its possible to just configure a FR switch in PT itself? if you can anyone wanna post an example? using sub interfaces
Started a forum for networking students, its new and needs people!
http://netadminstudents.zxq.net/phpBB3/
HTC students encouraged to join
http://netadminstudents.zxq.net/phpBB3/
HTC students encouraged to join
Comments
-
Options
QHalo
Member Posts: 1,488
Here's something that might be of assistance to you. You can configure a FR switch in PT. You use the cloud and it's fairly easy. I seemed to have deleted my old PT files from when I was studying for my CCNA but you didn't really want me to give you the answer now did you?
More fun to read and learn.
https://learningnetwork.cisco.com/docs/DOC-4021 -
Options
HardDisk
Member Posts: 62 ■■□□□□□□□□
Hi JJbrog,
Below I have copy/pasted from PT 5.2 a working example of "frame relay via packet tracer (using subinterfaces). I copied this code from my "R1#show run" output.
Note in this lab my R1 router is set-up as the Hub in a Hub-&-Spoke configuration.
i!
interface Serial2/0
no ip address
encapsulation frame-relay
!
interface Serial2/0.52 point-to-point
description PVC to Charlotte
ip address 140.1.1.1 255.255.255.0
frame-relay interface-dlci 52
!
interface Serial2/0.53 point-to-point
ip address 140.1.2.1 255.255.255.0
frame-relay interface-dlci 53
!
interface Serial2/0.54 point-to-point
ip address 140.1.3.1 255.255.255.0
frame-relay interface-dlci 54
!
How about the CLOUD you might ask?
#1 place Cloud object into your project.
#2 double click to open the control window.
#3 select the Config tab.
#3 set-up interfaces: One for each spoke
#3a select the local DLCI number & name it
#3b click the add button, move on to next interface. (repeat)
#4 under "Connections" select "Frame Relay"
#5 this is the HUB. now Map/link "Hub-to-Spokes".
#5a "Hub" serial port to "Spoke" serial port - Add. (repeat).
#6 Connect all Serial DTE cables to destination routers
#7 Connect all Serial DCE cables to source Cloud serial ports
[FONT="]Note: Destination routers link to the Cloud serial ports you configured in step #3 above.
I like to use the "Serial 0" port as the Hub and the other remaining ports as the spokes.
When mapping the Hub to each Spoke remember the mapping works both ways. This is called a PVC!
I used PT 5.2 to recreate the CBT Nuggets training video on Partially Meshed Frame-Relay.
I hope this helps.
[/FONT]