-
Is there a way to save VPCS in GNS3?
Hi, Is there a way to save VPCS in GNS3?
-
Domain Routing.
Hi Folks. Sorry if I am posting in the wrong place here but I require some routing guidance which is outside of my CCNA knowledge. I have configured inter-vlan routing between 10 cisco 3560 & 2960 switches with a default route to an ASA5550 going out to a DSL service as the default route. This is our product support Lab.…
-
How do I ping another host in GNS3?
Hi, I can't get a host to ping my router? I tried this http://www.gns3.net/documentation/gns3/adding-hosts-to-your-topologies/ but I still can't ping 192.168.1.254. I even setup 2 pc's on a switch and used VPCS to assign them 192.168.2.1 and 192.168.2.2 and I added the corresponding ports in NIO UDP for the host and they…
-
good day!
I walked into work today and someone gave me a pair of 2503 routers for my lab!!!!!
-
CCNP 300 series study material??
I passed my CCNA back in June 2012, so I'm approaching the 3-year recertification mark and am considering both CCNA Security as well as CCNP. As I was looking at CCNP, I noticed that in January they are retiring the 642-xxx exams and only allowing the 300 series. As such, I started looking specifically for books that…
-
Which CCNP Lab should I invest in?
Cisco CCNP Ccie LAB 2621XM 2X 2620XM 2621 2X 2950 3550 746320181790 | eBay or Cisco Ccna CCNP Certified Professional LAB KIT Free Rack 3x2620 16 64 1 Seller | eBay the guy selling the second one said he would include 1x 3350 switch for $425 or 3x 3550 switches for $499 in place of the 2950 switches. There is also this lab…
-
Which CCNP Lab should I invest in?
Cisco CCNP Ccie LAB 2621XM 2X 2620XM 2621 2X 2950 3550 746320181790 | eBay or Cisco Ccna CCNP Certified Professional LAB KIT Free Rack 3x2620 16 64 1 Seller | eBay the guy selling the second one said he would include 1x 3350 switch for $425 or 3x 3550 switches for $499 in place of the 2950 switches. There is also this lab…
-
2610xm as an Access/Terminal Server?
I have a spare 2610xm router laying arount not being used. Is it possible to convert a 2610xm into an access / terminal server? Also any idea what I need to do so? Thanks!
-
Love my new job as a Network engineer but
I love my new job as network engineer. I came from a credit union IT manager background but now pure network engineering. I can see how much new skills I need. I can see why cisco pushes debugs wow we have to ssh into routers and switche via jumpboxes and our laptops are locked down.YOu cant do or add anything without…
-
What to study after CCNP? Unique situation.
Hey Guys, I'm a CCNA certified Network Engineer. I passed my CCNP Route Oct 2012, quit my job in Mar 2013 and went on a year long sabbatical. Got back home, decided it wasn't time to settle yet so I left for another year travelling. Last time I justified not studying by learning Spanish. Anyway this time I'm going to…
-
DHCP - Global or Per Vlan?
Hi Everybody, Question: It appears that DHCP pools are set up on a global level. I am using a 3550 Switch. Is it possible to have 2 or more VLANs each using their own DHCP pool? Thank you!
-
CCNP Switch Offical Certification Guide Premium Edition
Just thought I'd share this. I have read the book already but I think i'll be getting it for the practice questions. CCNP SWITCH 642-813 Official Certification Guide, Premium Edition eBook and Practice Test
-
why routes "disappears"
After just couple of minutesRouter26#Router26#sh ipv6 route IPv6 Routing Table - 20 entriesCodes: C - Connected, L - Local, S - Static, R - RIP, B - BGP U - Per-user Static route, M - MIPv6 I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2…
-
Passed SWITCH exam today yeah but....?
Hi guys passed my switch exam just barely 835 haahha but a pass is a pass. but I have a question regarding doing the sims accurately. okay without saying what config I saw in the console. This is what I experienced. I was reading all the instructions but in the config on a switch I saw something I should add to my configs…
-
the new ROUTE SWITCH and CCDP?
hey guys if I have the older switch and route the 642-813 and 642-902 instead of the newer ones, that are coming in Jan 2015 can I still use them for CCNP? or do I have to take the new SWITCH ROUTE?
-
INE Bootcamp - Has anyone considered it
Has anyone done or considered doing an INE Bootcamp (CCNP or CCIE)? Investment or waste of money?
-
RIPng strange behavior?
Does it possible that I ping something, and in period of time 3,4 min, it is unreachable and request timed out?PC>ping 2A00:7F00::260:70FF:FE20:B84A Pinging 2A00:7F00::260:70FF:FE20:B84A with 32 bytes of data: Reply from 2A00:7F00::260:70FF:FE20:B84A: bytes=32 time=2111ms TTL=121 Reply from 2A00:7F00::260:70FF:FE20:B84A:…
-
redistribute static is enough?
When I want to redistribute static routes to RIPng, is it enough to write redistribute static in all routers?
-
Looking Cisco's 300-206 SENSS Guidence
Anyone familiar with Cisco's CCNP Security 300-206 SENSS curriculum and exam? What are your thoughts? Anyone actually take the 300-206 exam? My understanding Cisco Press SENSS book will be available January 2015. This is too late for me since I need to keep other Cisco certs current. Any success studying with a SENSS…
-
help with eBGP in Packet Tracer
I tried to do eBGP between "yellow" and "green" router. It pings each other. This is codes. Networks are all in my big network. This is only a part, only a BGP part. router bgp 65200 bgp log-neighbor-changes no synchronization neighbor 213.108.31.13 remote-as 64600 network 31.47.88.0 mask 255.255.248.0 network 194.145.56.0…
-
CCNP Worth Doing
is it worth doing ccnp.. will i get a good job on the basis of ccnp and be comps.. how much salary will i get?
-
29 Jan 2015 new CCNP
I have to push to ass Route and TSHOOT by 29 Jan 2015 rats
-
Site to Site VPN Pre Shared Key Rotation
Is there a best practice for changing the pre-shared keys setup for a site to site VPN? Or is that not something we should be concerned about?
-
ccnp - minimum voice lab?
Hi Everybody, I see that there is voip telephony on the ccnp R&S switch exam. What is the bare minimum for a home cisco voip lab? Thanks!
-
SWITCH test question re: wireless
I haven't seen anything so far that says that the SWITCH test requires one to know how to configure a wireless AP, but I wanted to ask anyway. I heard that wireless is only about 5% of the test anyway.
-
How much different is it working with Cisco vs Juniper hardware
Hello all, I realize that this is in the Cisco section but I assume many of you have worked with Juniper as well. I currently work in a 100% cisco shop and am interviewing for a position at a company that has a mix of both Cisco and Juniper. I'm CCNP certified and like to think I know Cisco hardware very well. How much…
-
CCNP Exam - Last Minute Advice
Hi All, I'm sitting my CCNP route next Tuesday, any last minute advice prep tips! Thanks
-
Regarding the CCNP Version 2
What If I pass the first 2 test before the deadline But I coulndt pass the third exam before the death line so it means I need to take the new exam. My question is. I need to retake the first 2 test with the new version or just the last test with the new version? Let me know Thank you.
-
CCNP Routing and Switching updated to version 2.0
It has been an ongoing rumor and cisco has finally updated the CCNP R&S. Looks like last day to certify is 1/2015 for current ccnp R&S. Only looks like around 15% of new material alot of emphasis on ipv6. https://plus.google.com/+KevinWallace/posts/hGh8R7ttr7W https://learningnetwork.cisco.com/community/certifications/ccnp…
-
Could getting CCNP be a bad idea for me?
Title sounds crazy I know but hear me out. I am currently studying for my CCNP but I have been thinking recently that since my current company doesn't run any Cisco gear what so ever, could it actually hurt future employment opportunities when they see that I haven't configured any Cisco equipment in a production…
-
Geting a rack for one's equipment - where to look?
I was thinking of getting a put-together rack for my sundry collection of routers/switches so I wouldn't have to stack them on a table. It would definitely save on space in the small room where I study. But where is the best place to get one? I thought about eBay, where I might could get one used, but I don't want to get…
-
CCNP Security Student Lab Manuals
Does the Cisco Network Academy have published .pdf Student Lab Manuals for the CCNP Security labs?
-
Nexus 1000v implementation +
I've been dying to get myself behind some Nexus hardware for a very long time. I just can't get approval to bring in that gear right now, the budget just won't allow it. So I wanted to at least implement the Nexus 1kv in our VMware test environment, which we'll be rolling out to production if all works, (e.g. HA and…
-
renewing certificate
my ccna is going to expire soon. is cisco going to renew my cert after i pass the entire ccnp exam or only oneof the switch or route or tshoot exam?
-
Technote: EAP Types [SISAS]
Not sure what the status of the Technotes feature is on this site as of now but I remember using it heavily back in 2004-2006 when doing some early certs so I wanted to offer a Technote that I wrote up regarding SISAS, 802.1x, and EAP. It covers EAP in general and the various types of EAP and their characteristics and…
-
Can a subscriber buy an E1 for voice
I think that generally companies with say 50+ employees would purchase an PRI ISDN30 line from their network provider. But I heard that sometimes customers buy an E1 line. I know that an E1 line is always on? Does this mean it is a leased line? How does that connect to the PSTN? Can a PBX connect to an E1 line in this way?…
-
loading Image on fash
I have a cisco 3745 router in lab. the Image on the flash got corrupted so i format the card and tried to reload from tftp. tried two different tftp and it wont work. Solar winds and tftpd32. does anyone have a good image file.
-
CCNP books
Which CCNP books are you guys using for the ROUTE track? For some reason, I find the Official Certification Guide by Wendell Odom horrible. Something about Odom I just don't like, I find what he's explaining very confusing. I noticed the same when I studied for my CCNA. When I read the Official Certification Guide for…
-
CCNP-Route: Best Study Methods?
Hi all, I'm going to start preparing to study for the CCNP-Route. Can you guys comment on these study methods? I was thinking... - Wendell Odom's CCNP-Route book - I used his CCNA book and it was a big help. My only concern about his CCNP book is, per Amazon reviews, it has a quite a few errors, so I'll need to download…
-
No textbooks for CCNP-Wireless?
So there are no Cisco books for the CCNP-Wireless track? I only see the quick reference guides, which are good but far from comprehensive. I think this is the only track I've ever seen that doesn't have textbooks to study for it. For someone who is wanting to study wireless without having any hands-on experience, a…
-
What is the definition of "load" in a network?
Why is the highest load taken for an EIGRP update message? Assuming my left arm carries 5kg while my right arm carries 10kg. Should the lowest value be taken since we are assuming the worst case scenario? Can anyone explain load as a metric component?
-
Successfully installed CUCM 8.6 on VMware ESXi 5 in 13hrs
Its 1am here on the west coast and I have just successfully logged into my CUCM web interface that is installed on my 16gb ram HP Workstation running VMware ESXi 5 VMvisor and vSphere client on my laptop to connect to the server and manage the VMs. I have a Subscriber and a Unity Connection install still running in their…
-
Control Plane and Data Plane Question; Virtual Forwarding Instance Question
Should troubleshooting be done at the data plane or the control plane first? I also have a VFI question Data Plane - pseudowire (PW) Control Plane - Ldp signalling Can I ask if virtual forwarding interfaces are formed after pseudowires are established?
-
What Is the difference between RIB and the global routing table
I am only aware of the difference between the global routing table and the vrf routing table.
-
CCNP Lab (Physical)
I got a rather good deal on some routers and so I was wondering if someone could give me an idea if this would be enough for CCNP. I'm planning to play about with it for a few months while I get my MCSA:2012 but I want to fall back on the Cisco stuff when I get bored with the MS stuff. 4 x 2950s 1 x 3550 3 x 2801 1 x 1841…
-
Offical Certification Gide For Switch has no answers
Anyone know where i can find explanations and answers?
-
Question On FIB Table
There are 4 components in a FIB table: ip address, next hop ip, next hop mac and the egress port. How does the FIB table know what the next hop mac is? Are there different mac address on the same device but on different ports? I am confused here. Any help appreciated.
-
Going to give SISAS a shot....
After debating on whether or not to wait out the release of the OCGs, I decided I would take a slight gamble and give SISAS a shot on August 1 [EDIT: July 19] because I really want to finish CCNP Security. For those that might not have followed the previous posts, I finished FIREWALL and VPN shortly before the changeover…
-
Anybody Gotten Switching Working in Alpha GNS3?
Curious if anybody who has contributed to the new GNS3 development and has Alpha access has gotten the switching emulator working successfully? I signed up but haven't checked back on Alpha progress much and I hear switching is now available however only works in an IOU linux format right now? (see below FAQ on new release…
-
Those finishing up CCNP R&S
Just curious as to what you all are going to move onto after you wrap up your CCNP studies? I love to study and learn as much as I can, but I don't know what my next goals should be. At first I was thinking my CCDA/CCDP since it would be a quick pickup, and I've read from all over that the CCDP material helps bring…
-
Switch equivelant to TCP/IP Vol I and II books
Been googling a bit, and see multiple resources thrown out there, much of it is just materials in general like blogs / videos / training courses, wondering if there is one or two particular books that really hit the nail on the head for switching concepts. I see BCMSN mentioned a few times, but was hoping there may be one…
-
Punt/Glean Adjacency
Anyone have a link to a detailed description of these? Haven't really ran into anything of my liking.
-
Etherchannel Weidness
I created 2 Etherchannels between a pair of switches. I decided to use LACP on one (Po1) and make the other a static Etherchannel (Po2 - "mode on"). I noticed that the configuration from the constituent ports had been set on Po1 as has always happened in the past, but Po2 had only the basic configuration applied by default…
-
clarification on cst, pvst, pvst+ and rst
hi, i'm a little bit confused with all these terms.. So, I think it's like this: - CST (802.1d) is the original STP. It runs one instance for all VLANs and the algorithm is pretty bad - PVST uses same algorithm but runs one instance of spanning tree per VLAN (Cisco proprietary) - PVST+ introduced some features like…
-
Remotely managing switch rack at home from anywhere for convenience of doing my labs
So, I currently have a R6200 Netgear router (Which unfortunately does not support 802.1q trunking). Luckily because the top of my stack is a L3 switch, I was able to configure the interface connecting to my router as a pure L3 port. Configured SSH, vty line with local login, etc. On the netgear side, I have a DNS name for…
-
ipv6 ospf and rip understaning the routing table
Hello, I faced an issue that i dont understand the reason for it. A case study to practice the ospf and rip for ipv6 it contains two routers each with one loopback. when configuring ripng and ospf3 on both routers the loopbacks on both routers are in the routing table with two entries once with ripng (/64) and the other…
-
Preventing Inter-VLAN communication - Layer 3 Switches
What would be the best approach to stop communication between two vlans on a 3550 L3 switch? Would I have to use VLAN maps and or Router ACLs...? This is one of those things I've never fully understood as the CCNA level books were always based around L2 switches and ROAS.. Thanks
-
250 for switch exam ouch!
man it has been a long time since I took a cisco exam thought it was only 150 per exam. it is 250 per ccnp exam? maybe ccna is only 150 huh? wow is it same for all CCNP exams 250 each or are they higher? 25 july 2014 642-813 switch date set studying my arse off hahha I a trying for CCNP all by end of year 2014
-
CCNP lab kit requirement
Guys, I am new to this site, infact just joined in to get some help. I am planning to sit in CCNP exams and for that i was thinking to buy gears to practice at home. First question is, which gears that i need considering i may sit in CCIE in future? I had a look around and found certificationkits.com which sells some kits…
-
CCNP Switch exam
To all you out there who wrote the CCNP Switch exam. Did you encounter many questions involving planning (like the PPDIOO model) and how did you prepare for those? The OCG literally mentions these topics for but a brief moment. I know the abbreviation stands for:* Prepare -> Current state analysis, creating the vision *…
-
Having issues applying route maps
Hello Everyone I'm trying to configure route-maps to filter a few routes, all config seems to be ok, but for some reason I'm still learning about the intended subnet to be filtered from a branch router. Below is the config I currently have, any ideas why this is happening will be greatly appreciated. Typology :…
-
CCNP Route Exam Set
Hi Guys, Booking my CCNP Route exam today for the 22nd of July, any advice or tips to help me nail this one? I've been labbing on a daily basis and studying CCNP Route OCG, Route Simplified, Chris Bryant Route Guide and videos. Thanks
-
Some sources for SISAS I've found
Just felt like sharing some of the available videos I've been running into that are for the SISAS material. While these videos don't explicitly name the exam, they cover material that is in the exam outlines. I decided to make this thread since as we know there's no available OCG for these yet. ISE Quick-start (8 parts)…
-
CUCM 8.6.2 + CUPS for lab IM
Hi, I've been playing around with Cucm 8.6.2.10000 and just installed CUPS 8.6.2.10000 as well on VM. The post install tasks have been done, both can ping each other and linked with local NTP server (router running on subnet connected for vSwitch with cucm/cups). I am not using DNS yet, so it's just based on class C ip…
-
AIR-AP1142N-A-K9 configuration issue for guest ssid and BVI1 down
I'm trying to get the guest ssid working any help would be greatly appreciated. I was frustrated so saved my old config and wiped out everything on this AP. Now my interface bvi1 does not come online. It previously worked but don’t know why it doesn’t now. ap#sh ip int bri Interface IP-Address OK? Method Status Protocol…
-
CCNP/CCIE Lab Suggestions
My Current Certs A+, CCNA R/S, JNCIA, CCNP R/s (Incomplete)--Passed Switch, Studying Route I have played around with Packet Tracer, Netsim and going w/ a full CCIE Capable Lab I currently work for service provider so this lab will implement Juniper Devices as well in the topology. Its unfortunate that I cant implement…
-
TSHOOT passed, CCNP complete
Well, I finally took the plunge and sat the TSHOOT. It's been almost a year since I took my last Cisco exam, so I was a bit worried. I used the Boson on and off for the past year or so to prepare. Like others have said before me: Don't worry about it. Even a decent Ccna with basic bgp knowledge should stand a pretty good…
-
**** answer required immediately for nat********
Scenario: I have one router and two laptops A and B. I would require to configure NAT with this setup according to the below given scenarios. 1. One server i.e,Server A should be behind the NAT and B should be outside a NAT. 2. Server A should be outside a NAT and Server B should be behind a NAT. 3. Server A should be…
-
Help understanding ASYNC lines
So at work I am trying to understand the behavior of Async lines. As far a what I know this is a configured dialer type interface that might be hooked up with a modem that is running ISDN to provide dial in services to the equipment. What I beleive I understand is the reason I am seeing the interface down is because it is…
-
CBT nuggets, ccnp switch, STP
Hello, i think there's a mistake on stp videos for CBT nuggets series. According to attached pic, can you please confirm? From switch E point of view, shouldn't Root Port be the one towards switch C ? And from switch F point of view, shouldn't root port be the one towards switch C? Later on the video, he says that root…
-
eigrp load balancing
Link to topology link sh run ..interface Loopback11 ip address 10.1.1.1 255.255.255.0!interface Loopback12 no ip address!interface FastEthernet0/0 ip address 100.1.2.1 255.255.255.0 ip load-sharing per-packet duplex auto speed auto!interface FastEthernet0/1 ip address 100.1.4.1 255.255.255.0 ip load-sharing per-packet…
-
switch giving me invalid errors typing show commands
all of a sudden my switch starts givingme invalid marker commands when i type in show commands or conf t commands should i redo my ios? is it corrupt?
-
ccnp job without experience in dubai
dear fellow... i am doing ccnp and in nov moving to dubai for searching jobs. can any body tell me.. will i get job without experience. on ccnp basis. ?? i have done ccna .. now doing ccnp.. what chances are present for me in dubai to get job .. plz give some serious suggestion..
-
L3 Switching Vs Multilayer
Hi, what is the difference between layer 3 switch and multilayer switch?
-
Cisco IOS Image for GNS3
Hello, I passed the CCNA exam 2 weeks ago, and I am looking to build on the momentum and head straight into the CCNP. Due to funds constraints, I can't afford hands on training or buy real gear at the moment. I did some research, and GNS3 appears to be a decent way to lab the CCNP Route at least. I have downloaded and…
-
Ine ccnp dc
Looks like they're releasing the goods here soon. CCNP Data Center
-
Wireless on SWITCH
I was told that there's almost no wireless on the SWITCH test since they made a separate wireless track. Is this true?
-
Taking CCNP Route on Wednesday
Just like with the CCNA exams, I am getting nervous as hell...
-
Passed CCNP ROUTE today!!
This exam was much more difficult than I had anticipated and literally the first question blew me a way haha. I think I stared at the configuration for a good minute or two before I chose my answer. Passed with a score of 815 but with how difficult it was I'll take that. Exam is not for the faint of heart and you…
-
Any free practice tests for CCNP Route??
I'm taking the exam on this coming Wednesday and have done a few practice tests but was curious if you folks new of a good resource. No braindumps pls.
-
How to Create a TFTP Server
This may / may not be the correct place to post this but I know us Cisco guys have plenty of experience with TFTP servers. So here is what I am trying to do... I have a spare PC at home that is collecting dust and I figured I might as well make good use of it. I am in the final steps of building out my Switch lab and…
-
Uplinkfast and backbone fast for SWITCH
I've been watching the CBT Nuggets for SWITCH, and as I've been going through them I thought I would see some on uplinkfast and backbonefast, but no. I thought they were concepts covered under the heading of STP? It covers this, as well as RSPT, but I also don't see him talking much about PVST, either. I'm curious why.
-
type 7 lsa and type 5 lsa confusion
after another routing protovcol reaches the asbr, the asbr converts it into type 7 lsa. then the type 7 lsa is converted into type 5 lsa when it reaches the abr. am i right? but the ocg textbook states that type 5 lsa are not accepted for nssa and stubby area. this is making me so confused
-
ASA 5505 and Linksys wireless router
Hello, I am new to ASA's/Firewalls and I am trying to setup a Cisco 5505 with a Linksys wireless router on my home network. I can configure the ASA to work great with just a computer attached with full internet access, but every time I try to incorporate my Linksys wireless router I am having no luck. I don't know how the…
-
Advertising loopback network as /24 instead of /32 in OSPF?
Ok, I know how to advertise a loopback as a /24 into an OSPF area. This is done by using the command #ip opsf network point-to-point I'm wondering how the /32 is now made into a /24 network. I don't understand how this can change by changing the network to point to point. Why is it advertised as a /24 as opposed to a /32.…
-
The purpose of a 0.0.0.0 0.0.0.0 null0 static route outside of it being bit bucket
I was doing a lab where I had bgp redistributed into ospf and without the command above, I couldn't ping to interfaces coming off of the F0/0 interfaces from a router not directly connected to the OSPF router (It was a bgp router). Even if I injected network 0.0.0.0 into bgp and had default-information originate in OSPF,…
-
Question on PAT (Overloading)
Can PAT (overloading) work on the reverse ? Normally we use pat to over load a single or a few public IP address from lots of private [RFC1918] IP address range - it it possible to reverse the task? a few public IP range> mapped to lots of private IP range ? traffic will be initiated by the few public IPs - if this is not…
-
Is L3 Etherchannel possible in Packet Tracer?
Can anybody tell me if Layer 3 Etherchannel is at all possible on the 3560 multi-layer switch in Packet Tracer? It does not accept the "no switchport" command, to set it to Layer 3 mode. Heres the output I get: Switch(config)#int port-channel 1 Switch(config-if)#no switchport % Incomplete command. Switch(config-if)#no…
-
Finding the $$$ for a home lab
I'm trying to put together some more equipment for a home lab. I'm not looking for a magnificent home lab - only something sufficient to get me through the three NP:R/S tests. Let's just say that things are very tight financially with me, and I just don't seem to have the funds for even eBay equipment. Yes, it's that…
-
Found a lead on release date for OCGs
On a whim I decided to do an Amazon search for any SISAS material as that is the exam I'm working on and came across the pre-orders for SENSS and SIMOS. It looks like the release date is Janurary 2015 for the time being which I find hard to wrap my head around considering that there's no other written material available…
-
Starting to study, any ambush changes?
I'm about to embark upon CCNP R&S by ordering the materials. Is there any ambush alike changes that is coming for this? Or is it just totally unpredictable? It would be not nice to have to study for a new version of this exam suddenly in near future. Thanks.
-
INE CCNP DC Training
Just a heads up to the people currently chasing after the CCNP DC and have the INE AAP: There is going to be a CCNP DC UCS Live Online Course from August 11-15 and a CCNP DC Nexus Live Online Course from August 25-29. The courses probably aren't all-inclusive or in as much detail as the CCIE DC courses but might be a good…
-
eigrp question - network command
From pg 59 CCNP route router eigrp 1 network 10.1.0.0 0.0.31.255 network 10.1.2.2 0.0.0.0 Why is the 10.1.2.2 0.0.0.0 necessary? Isnt it under the range of 10.1.0.0 0.0.31.255? Dont understand why there is extra step
-
Best Comprehensive Study Material
Got my CCNA June of last year by starting off with the official Books ICND1/2 then switched to CBT Nuggets Briefly (Didn't care for Jeremy running on tangets) Looking on getting my CCNP Switch exam done -Purchased eqp (2x 2950's and 1 3550 Switch) -Was able to obtain CBT Nuggets CCNP Vids I don't prefer is teaching style…
-
Anybody working on this track currenty?
As the title suggests. I have done CCNA Security course and will be doing Implementing Cisco Edge Network Security Solutions in a course soon for work
-
Ine ccnp dc
-
Write exam on cert expiration date
Hi All, Is it possible to write a 642 level exam on the date one's CCNA expires? E.g., if my CCNA expires July 1, can I write a CCNP exam on July 1 or is the latest date June 30? The date references I've seen on Cisco's site usually state "before", but I'm curious if "on" is valid as well. Thanks
-
Ccnp books
Hello I'm going to start studying for ccnp.. I believe the cisco press books are the best ones available. .. Looking at this particular switch book by David Huckaby http://www.amazon.co.uk/gp/aw/d/1587202433/ref=mp_s_a_1_3?qid=1402847111&sr=8-3&pi=SL75 The reviews advise you will not be able to pass the exam... any…
-
what is the different between a candidate default route and gateway of last resort
I am referring to ccnp route ocg pg 130
-
SWITCH OCG: Auto QoS for Cisco Softphone
I'm currently reading the SWITCH OCG and noticed on P.324 that it says in regards to the cisco-softphone keyword But, 24 doesn't appear to be a valid DSCP value. It would equate to AF30 (Flash with Drop Precedence of 0). The book only lists 3 levels of Drop Precedence - 1 (Low), 2 (Medium), and 3 (High). Do they perhaps…