-
Passed the JNCIA-ER
Hey Guys, Passed my JNCIA-ER this morning, 98/100. The exam was a walk in the park compared to Cisco exams. Thank you very much to the people that gave me advice (Zoidberg) Sean
-
One book is not enough.
I get one SRX 3400 today and I found a book many days ago about SRX,It name is JUNOS SECURITY. I'm feeling so diffculty to deploy routing-instances VR,I check the "JNCIP-SECURITY STUDYGUIDE" JUNOS SECURITY,It's only 2 pages introduce routing-instances...
-
Anyone take the JNCIS-ER via FastTrack?
I'm on the fence about going after the JNCIS-ER before the Dec 3 retirement date or if I should just focus on the JNCIA hop to the JNCIS-ENT. Do folks think the JNCIS-ER exam is realistic for a CCNP with little Junos experience? Obviously, it'd be preferable to take one test instead of two, but if the JNCIS-ER is a monster…
-
Passed JNCIP
Passed JNCIP, thanks experts for help in clearing doubts and concepts.
-
Do i get a wallet card
Does juniper offer wallet cards to jncia-junos!
-
JUNOS Security book
For those interested in JUNOS and the SRX, the new security book is available, and oreilly.com is featuring it as the "EBook Deal of the Day" at $9.99. Disclaimer: I have no affiliation with O'Reilly. I do work for Juniper. I have nothing to do with this book, other than knowing a couple authors. Just thought I would throw…
-
Jncia-er exam
Are there any labs on the exam like cisco has where you have to login to a router and make configs? I am going to take this exam tomorrow morning. Thanks!
-
Juniper SSL VPN certification
Hi all, I am new member forthis forum. I have completed my 3 juniper certifiaction and looking forward for 4th JNO-570 which is JNCIS-SSL VPN. Any one can let me know which is new **** version is available into internet? latest **** with me is 5.24 v. will be sufficient to clear this one? regards Kalpesh Pradhan JNCIA-ER…
-
Advice for JNCIA-ER
I just got my CCNA Security about 2 weeks ago and I was advised to get my JNCIA-ER for our network. Any of you guys have a Juniper cert? Got any advice for the ER exam? Is it hard? Would you be able to give me a brief overview of the exam? Thanks a lot.
-
Jncia-junos
Hi, Anyone know if there are any study guides available for this intro cert to JUNOS? Ive looked on the website and thought it may have a study guide under the fast track but that doesnt appear to be the case. I notice they have recommended a few courses but with a total cost of over $2000 i dont think i'll be lookin into…
-
Link Aggregation on J Series router
I have problem assigning ip on my logical interface (ae0). I am using JUNOS 9.3R4 chassis { aggregated-devices { ethernet { device-count 2; } } } ### 8-port GE uPIM interfaces { ge-6/0/0 { gigether-options { 802.3ad ae0; } } ge-6/0/1 { gigether-options { 802.3ad ae0; } } ge-6/0/2 { gigether-options { 802.3ad ae0; } }…
-
OSPF in VLAN...
Hi all & Expertise, I'm need your advise regarding my scenario. Currently i have 2 Core Switch (EX820 at Server room and access switch at each Floor (1 to 34) and each floor have each VLAN. Previously i have experience setup using STP in Cisco but not in Juniper Enterprise. My Question now how about if i using OSPF in…
-
Do you like the new certification logo?
New Certification Logos CertManager - Juniper Networks Do you like the logo? not much from myself.
-
QinQ
Hi All, I have a customer who looking for QinQ solutions in his environment. His requirement is Customer A (CE router Vlan x & y)<---- metro-E> Customer B gets vlan x Customer C gets vlan x&y His environment only runs L2 VPN Is QinQ useful in this scenario? CE is router, not switch I know 1 vendor supports super vlan which…
-
Interface Index(ifIndex) changes when router is rebooted
It's a well-known "feature" that interface ifindex value will change after certain JUNOS upgrades. However, the same problem is present when one reboots Juniper device- some interfaces will change ifindex value. I have heard it happens with M40, MX960, M7i, with newer switches and probably with other platforms as well and…
-
OSPF - IBGP peering with non backbone router.
I am preparing in JNCIP-M. I feel bit of confusion in the JNCIP book on OSPF as IGP part. From the book, only required to include interface lo0 into OSPF configuration at backbone /area 0. For the sub-area, there is no inclusive of lo0 in OSPF configuration. It caused when i building the IBGP and and peering with those…
-
JUNOS Cookbook
I'm looking to get a nice reference book for JUNOS as I'll be working with it more pretty soon. A coworker has the cookbook and it seems pretty good browsing through. I'm just wondering if anyone has any other suggestions before I drop some money on the book. To be clear, I'm not necessarily looking for anything deep on…
-
Major Cert changes coming
Here is the Q&A
-
mpls traffic-engineering options
can somebody explain different b/w mpls traffic-engineering options? bgp-igp-both-ribs vs mpls-forwarding root@R2# set traffic-engineering ? Possible completions: bgp BGP destinations only bgp-igp BGP and IGP destinations bgp-igp-both-ribs BGP and IGP destinations with routes in both routing tables mpls-forwarding Use MPLS…
-
Uplink interface for EX4200?
Hi all & experts, I want to ask question regarding EX4200. I have 2 EX4200 (24 & 48 port) with 1 uplink module 4 port for each switch. One connection (48 port) is go to CoreSwitch 1 and 2nd (24port) link go to CoreSwitch 2. For EX4200 i create virtual chassis. So my question if put both link at Uplink module at EX4200 what…
-
Start JNCIE study now or wait until OCT
when the new test(s) are revealed and see what the new stuff is..? what if everything is changed in the new JNCIE-SP? thoughts??
-
ISIS Authentication
Working through the case study- The task for authentication says"All areas must use hello authentication based on md5 with a secret of jnx. The backbone area must also authenticate LSPs using a simple password of jnx" The solution for this shows this config on R5 level 2 { authentication-key "$9$jEkmTOBEhrv"; # SECRET-DATA…
-
Juniper router in GNS3
Hello everyone, I am trying to make juniper routers work in GNS3. After GNS3 installation when i click on the router it says please configure a default JunOS image. Can someone help ? i have the image just need help to install it in GNS3 Thanks SD
-
Can we make redundancy Active-Active mode in EX8208?
Hi All, Need your help n expertise. Can we make redundancy Active-Active mode in CoreSwitch EX8208. For example between Core01 and Core02. Need urgent your advise. Thanks..
-
Learning JunOS for ER
Hi guys, I havent touched JunOS in my life but an opportunity has arisen where i can get some hands on in a production environment. So im thinking about taking advantage of the fast track program and starting with the jncia-ER. Im just wondering what your thoughts are on the exam and how difficult it is when compared to…
-
Where I'm at
So this week I flew to Salt Lake City for an exam writing workshop for the new JNCIS-ENT that is coming out soon. :) How cool is that? I just thought I'd drop a note here to brag :D
-
Passed JNCIP today
I took the test today in sunnyvale and got the e-mail in just couple hours after the exam that i passed... would like thank to everyone on this forum for help especilly Aldur and hoogen for clarifying stuff.. for prep.. again..i used the sybex JNCIP book...couple months on and off to study..did the case studies only... had…
-
L2TP not working using windows dial up on XP windows client
hi, I have configured the Juniper ssg-140 for site to site VPN and client VPN. The problem is when i installed the netscreen client on the windows xp system then only the i am able to connect to the VPN using my windows XP VPN dial up. If i'll not installed the Netscreen on the system and try to connect with simply windows…
-
bgp reject all
Hi, Is it necessary to have reject statement at the end of all ebgp/ibgp import export policy? For example I am rejecting all RFC1918 in term 1 then adding community in term 2 and dont have accept in term 2 and then I will leave the policy other thing i can have term2 with next policy in then action and have term 3…
-
route-filter 0.0.0.0/0 through 0.0.0.0/7 reject;
Hi all, Qusetion from JNCIP study guide, No default route or any 0.x prefix with a mask length up to /7 I believe answer is below, route-filter 0.0.0.0/0 through 0.0.0.0/7 reject; My question is above statement can be replace by below route-filter 0.0.0.0/0 prefix-length-range /0-/7 reject; ???? tks
-
JNCIP- EBGP Regex-C1 and C2
what do expressions .*65010 and .*65020 do? would ^65010$ and ^65020$ not work? and to filter default routes instead of route-filter 0.0.0.0/0 through 0.0.0.0/32 reject route-filter 0.0.0.0/0 reject wouldn't work?
-
JNCIx-SP - lab kit implications?
per this thread: http://www.techexams.net/forums/juniper-certifications/56332-major-cert-changes-coming.html what implication does this have on lab kit? only the JNCIS-SP syllabus has been announced so far (P/E to follow): Service Provider Track - Juniper Networks Exam topics include: VPN Concepts and Troubleshooting,…
-
ping between Juniper router and Cisco switch doesn't work
I have connected Juniper router and Cisco switch using straight-trough cable. Juniper router port configuration is following: description 1000BASE-T;unit 0 { family inet { address 192.168.99.1/24; }} ..and "show interfaces ge-1/2/0 terse" shows that interface is up: Interface Admin Link Proto Local Remotege-1/2/0 up up…
-
Auto Kill VPN on failover
Hi Guys & Gals, So I have track-ip setup to do VPN failover on a NS50 to an NS25 (this is my lab in the office, in production will be SSG140 to anything from NS5GT to SSG20). This works fine and the routes fail-over as do the VPN's to the backup. One thing that is curious to me. When the failover switches back to the more…
-
ISIS Case Study
In this case study R5 is in area 0003 and needs to Level1 peer with r6 and r7 which is area 0002. How can you peer at L1 in two different areas. i'm sure i missed something obivous here..i'm new to isis Thank you in advance..
-
Rfc1918
term rfc1918 { from { route-filter 10.0.0.0/8 orlonger reject; route-filter 192.168.0.0/16 orlonger reject; route-filter 172.16.0.0/12 orlonger reject; route-filter 0.0.0.0/0 through 0.0.0.0/32 reject;>>>>> abit confust for route-filter... } } anyone can help~~tks
-
Passed JNCIE
Dear ALL By Grace of ALLAH Almighty I have passed exam of JNCIE-M/T Thanks for your support and help. Regards, Hasan
-
SRX Series VPN's unreliable behind ASA 5510.
Hey all, wondering if someone else here might have some input for a Juniper newbie (and somewhat of a Cisco newbie at least with VPN's goes too). I've been able to establish route-based tunnels from our SRX240 at our corporate location to SRX100's and our Linksys RV042's (being replaced by SRX100's as we get out to all of…
-
Srx240
Hello all, Is there anyone here knows how to configure the SRX240 firewall to allow a specific IP Address from the outside network to connect to it using HTTPS and TELNET only? I searched the internet but found nothing. Thank you.
-
One Week before JNCIE-M Exam
Hi all, I am about to take my JNCIE-M in a week and was wondering what else should I concentrate on this last week? I have done all the scenarios from Harry's book and have gone over the JNCIS book. I also have reviewed all the config guides for MPLs Application, VPN, and Multicast. Any tips would be greatly appreciated…
-
ISIS lo0 interface
hi all- i'm real lite on ISIS..if a router that has interfaces in both level 1 and level2 ..should lo0 interface be part of level1 or level2 or can you run both level1 and 2 unless stated otherwise? thanks
-
BGP update will take IGP or RSVP/LDP
All, When we have L3 VPN scenario for example: CE1---PE1---P---PE2---CE2 We have RSVP LSP from PE1 to PE2 to reach the PE2 loopback IP. Now when we do the show route <PE2 Loopback> we see the two path in routing table one via the IGP (Pref of 10 in case of OSPF) Other via RSVP (Pref of 7) Now we have IBGP between the…
-
JNCIA-JUNOS and JNCIS-SEC Exams Help
Hi Everyone, I am new to Juniper and have been looking at their fast track certification courses. I have been studying through them for a couple of days and have passed the Pre-assessment exam with 76%. I need some serious advice as to what to expect in the actual exam and how much studying do I need to do before doing the…
-
IBGP between RR of same cluster and design consideration
All, Having IBGP session between the RR of same cluster will not be of any use as the route received from the client on one RR will not be accepted by the other RR in the same cluster But if RR has EBGP peer then yes we will need the IBGP even between RRs too. normally in RR design you usually avoid the RR in path of data…
-
Router filter in JNCIP Book
On page 525 in route filtering section it says advertise peer routes to transit providers and in solution on page 538 & 539 it use term 2 with reject action by matching community of peers and then export in BGP configuration so it will block the PEER routes advertised to Transit neighbor so can some one confirm this or I…
-
IS-IS Configuration......Its Important
Dear all, I have configured ISIS protocol on my seven routers according to JNCIP Book Lab(page#287).I have configured every thing related to ISIS protocol but during adjacency verification, some links were fluctuating (some time up, some time goes into initialization and some time goes down). Then I confirmed from JNCIE…
-
RR design consideration
Any guideline or good document about RR DESIGN consideration?
-
{Question}Any quick way to verify the IGP reachiability
Dear Folk, anyway have any good method, for cisco, I normally use TCL script.... not sure what you normally do during the lab.
-
JNCIP Book EBGP Case Study P1, T1, T2 configs
Are they in the book somewhere? if so can someone please point out where they are in the book...thanks
-
creating users and password
need some clarification----in JNCIP lab 1 it says to create users/password lab, root and noc. when i try to create these with the same password it says the password should be minimum 6 charc.. can this restriction be changed to just 3 letter and no alphanumeric? or if these users are going to be authenticated by radius, do…
-
How long usually the notification email received?
Folks, how long after the exam the notification email arrived?
-
Passed JNCIE yesterday
Dear all Just got congratulation email 5 min ago. I felt bad while waiting for the email for 15 hours but now I am on cloud nine. I failed at the first attempt sadly but the failure urged me to dig deeper and helped me discover more mistakes I've made which were not even mentioned by the proctor. I would not have learned…
-
How to create broadcast conncetion using logical router
Hi All, Got question here, for logical-router, normally we use "peer-unit" command to create the point-to-point interface, any idea how to create LAN connection as illustrate in the diagram. tks.
-
[Question} - How to add multiple loopback IP in one logical router
Hi all, Can someone guide me how to add multiple loopback IP in one logical router in Olive. FYI i already try but failed. Refering to this URL Bring MPLS Network at Your Home Lab :: Juniper ...this person can add multiple loopback IP in one logical router. I'm use OLIVE - QEMU 10R. Thanks..
-
Advise for Juniper-FW cert
Hi All, Just a quick advise. I have about 2 years of good experience on Juniper firewalls and need inputs on which certification should I take? 522: Juniper Networks Certified Internet Associate (JNCIA-FWV) 532: Juniper Networks Certified Internet Specialist (JNCIS-FWV) As I have seen on Juniper site, both of these certs…
-
2 months to go for JNCIP lab
Is the Sybex JNCIP book enough?
-
L2VPN or VPLS label calculation RFC4761
Can some one point me to the easy calculation document for RFC4761 label allocation technique? its very confusing. To my understanding site-offset + label-range should cover the remote site id So if remote site id is 30 then site-offset should be 24 and range should be 8 which covers the range from 24 to 31 where this…
-
JNCIA-M/JNCIS-M sample exams & lab kit?
hi all, excuse the n00b questions, first post in this forum ... I am looking to take the JNCIA-M & JNCIS-M exams over the next 6-12 months. I have CC[IN]P - so hopefully I have a fair grasp of the protocols - & have been working in SP's for 10+ years although not lately with either cisco or Juni kit. I have some Juni…
-
Screen OS VRRP interface tracking
Hi, I have no problem with basic VRRP config for 3 SSG20 & it worked fine. Is there anyone has done the interface tracking in screen OS for VRRP? Thanks
-
Olives and Frame Relay
I wondered, is it possible to work Frame Relay with Olives? I'm currently using Dynamips to go between Cisco routers and Juniper Olives (under QEMU, with UDP tunnels connecting from Dynamips), and I am under the impression that Frame Relay would be unlikely to work, but I may be wrong. Anyone had any luck?
-
seems a lot of good news lately
I finally got my congratulation letter for the JNCIE-M. :)
-
Confirmed May 20 for JNCIP-M in Herndon...
Time to break out Harry's book... I've read a great deal of it already. Need to practice a few things on the olives to brush up. Then, hopefully, its on to the JNCIE-M...
-
JNCIP-M Exam Question
Hi all I am studying for the JNCIP-M exam and progress seems to be going well. One question I had about the exam without breaking the NDA is: Is the lab presented like the book is? i.e in building block sections? or are the topics all mixed up together? thanks
-
LSP prefix mapping
Hi, I was configuring the prefix-mapping for two different LSPs as in chapter two of the JNCIE book. LSPs are between r7 and r3, called r7-r3 and r7-r3-prime. R3 sends 130.130/16 routes into the AS via BGP. Idea is to map different prefix lengths to different LSPs. So far, so good. When I configure r3, r4 and r5 as RR, the…
-
Question for monitor interface
I got the question on below output, what is diff between local,remote statistic? Interface: ge-4/2/0.820, Enabled, Link is Up Flags: SNMP-Traps 0x4000 Encapsulation: VLAN-VPLS VLAN-Tag [ 0x8100.820 ] Local statistics: Current delta Input bytes: 0 [0] Output bytes: 0 [0] Input packets: 0 [0] Output packets: 0 [0] Remote…
-
Where is src-MAC added into the frame?
If I send a packet out from the M10i router, where is the source MAC address attached to the frame? In RE? Or in CEFB? Or in PIC? One could think, that if every Ethernet unit(virtual interface) has unique virtual MAC address generated, then RE is the one, who puts source MAC addresses into the frames Any thoughts?
-
JNCIA opinions?
I'm close to finishing my last test for CCNP and my boss is asking us to get JNCIA certified given some new Juniper purchases that we've made. I'm curious to hear your opinions on the JNCIA test and how you feel it compares to the CCNA or CCNP tests. I'm one of the always-been-Cisco folks now seeing the light of Juniper.…
-
JNCIE errata
Is there any kind of JNCIE errata with all the corrections over the book ? I have already found a couple of mistakes in the book ( for example CoS chapter , be policer also catches NC traffic) which would cost me a couple of points on exam so would be nice to know all of them Thanks
-
SSG5 vs ASA 5505?
Hopefully some Juniper guru's can chime in here :) Our shop, and myself for that manner, haven't had any experience with Juniper in the past. We are going to be finally replacing our often failing as of lately Linksys RV series VPN routers at our remote offices. We were originally going to go the route of ASA 5505's since…
-
policy: rip-in
On Page 216 of JNCIP book, they have used the RIP import policy "rip-in" so it is used to only accept the RIP routes on that router to avoid loop? But that we can achieve by writing export policy in OSPF too? only match RIP routes and advertise it in OSPF rather than writing rip-in policy.
-
redundant RR IBGP session in IBGP
In case of redundant RR, how the IBGP session will be build between RR: under cluster configuration or under IBGP group configuration? Both RR is part of same cluster. In any way the clients will have IBGP session to both RR and RR will ignore the routes received from each other because of cluster-id.
-
Export ibgp policy in ibgp as well as c-ebgp
All, export ibgp policy in case of confederation. In JNCIP book 192.168.X.0/24 static route is configured on all router. Now for example on R3 it will have static route of 192.168.3.0/24. Now R3 has ibgp to R1 and c-ebgp to R5, so export ibgp policy will be configured under ibgp and c-ebgp group configuration under BGP…
-
JNCIP EBGP Peer export policy
All, I am bit confuse with the peer export policy in JNCIP book from page 529 to 537. It is trying to advertise 10/8 from R1/R2 to P1 but that area is NSSA with no-summary so R1/R2 will have only default route in route table and adding aggregate of 10/8 with reject on R1/R2 will cause the traffic drops. So can any one help…
-
L3vpn hub & spoke ques
Using case study topology. P1 (CE1)---R2(HUB)SPOKES--R4/R3 (CE2/CE3) NO connection between R4/R3. They all going through HUB site. full mesh LSP HUB Config [edit routing-instances vpnb] root@R2# show instance-type vrf; interface fxp0.0; route-distinguisher 10.0.6.2:1; vrf-target { target:200:100; import target:200:101; }…
-
Multicast and DA reject
Can someone point me in the right direction please ? I have got laptop connected to j2300 (9.3R4.4) with VLC streamer. Packet count is incremented as per setup, but seems like all multicast traffic get discarder so I do not see anything with #monitor traffic interface .. With traffic statistic I can see the counters, the…
-
Juniper Exam JNCIS-E is Changed
Hi all, do you have any information in relation to the brand new exam jn0-130. I know for sure this is changed since April 2010 but I'm not able to get any info about it. Does anyone of you know something more? Thanks in advance. Ciao Luca.
-
OSPF Advertise Secondary Address
I have an old Juniper M5 running 7.5 and I'm trying to figure out how to advertise a secondary address on a loopback into OSPF. Relevant interface and OSPF config below. area 0.0.0.1 { authentication-type simple; } interface lo0.0 { passive; }}me@router> show configuration interfaces lo0 unit 0 { family inet { filter {…
-
export in BGP
If I have two internal BGP group, 1 is to setup IBGP between RRs and 2 is for client, If I will export static route in one group is not getting advertise to other group and if I will export static route on top(global) then it gets advertise to all IBGP peer, so bit confuse on that rule. Is it like same as nighbor with…
-
New certifications & Cirriculum
New Certifications Cirriculum Updates Enjoy! :D
-
Finally I have done it.... JNCIE-M
Feel like a networking Jedi now... Got my JNCIE today... feels like an awesome addition to my CCIE.... :) Feel free to ask questions... Will answer to the best of my ability without breaking the NDA...
-
netscreen NAT with VPN
Hey! Maybe im a bit tired and shortcircuited righ now, but im stuck... I have a netscreeen that makes site-to-site VPN-s over public Internet. I have many 192.168.0.0/16 internal subnets and i want to make yet another VPN to remote company for lets say internal 192.168.10.0/24 network (NOT directly connected to netscreen),…
-
How "Load" command help in JNCIP/E exam
Dear folks, would appreciate if you shared your kind exprience.... Tks a trillion.
-
JNCIP-M scheduled
Set for end of June ... hopefully I can get enough time in by then. I spend most of my time troubleshooting at a PFE/Fabric/RE level. It is amazing how fast the basics fade from memory .... Least I have an excuse to make some crazy VR setups ... a Few MXs and Ts in the lab ... so I am going to carve them up into Logical…
-
SRX210 vs J2320
Completely lost and confused, any help wanted :D I know that junos-jseries does not support prefix-specific feature on j2300, but junos-jsr does ( we are talking about minimum release 9.3) However, j2300 does not support junos-jsr, only junos-jseries. So, decided to buy a couple of SRXs, they do seem to be able to run both…
-
phew! jncie-er for another 2 years
passed the jncis-er today. definitely not like my speedy and high scoring jncis-m performance. but it was a good enough, and i'll take it! :) good for another 2 years. things worked out well for this. company was making me take the jncis-sec, but i just passed that a couple months ago and don't quite need to recert that…
-
VRRP Configuration in Olive
Hi All, I am facing problem in configuration of VRRP in Olive. After configuring VRRP in olive and check by using run show vrrp summary, i got the message as VRRP is not running. Can anyone solve this problem? Regards Adeel Ahmed
-
JNCIP OSPF Case Study Analysis
I finished JNCIP OSPF Case Study and I was doing some check and I got the below result and I hope to discuse it with u *** I was trace route 10.0.5.1 from RIP router I got the below O/P RIP# run traceroute 10.0.5.1 traceroute to 10.0.5.1 (10.0.5.1), 30 hops max, 40 byte packets 1 172.16.40.2 (172.16.40.2) 0.947 ms 0.790 ms…
-
Junos firewall configuration
I tried to make a firewall configuration for Junos. I have a Juniper router, which separates internal network( 192.168.1.0/28 ) and external network( 192.168.2.0/29 ). Rules are fallowing: 1. allow traffic to 192.168.1.7 ports 80 and 443 from all hosts 2. allow ssh traffic to all the hosts in 192.168.1.0/28 from…
-
EBGP confusion
Hi All, Greetings!! :) 1-Can anyone tell me the easiest way to attempt EBGP exam section. I mean to say which part i should do first to avoid blockage of routes/ avoiding any confusion? which hierarchy i should follow in order to achieve successful results. 2- How to handle EBGP policy order in more efficient way? 3-…
-
Jn0-202
So im studying for my 202 and i realized there isnt much books out there for the updated exam. ive read that theres not a lot of difference between the two, but i cant even find a book thats written specifially for the 202. What are some good titles? I have all the free books off the site, but it would be nice to have some…
-
LSP policing
Hi everyone, sorry in advance for rather tedious question, but I have never done it before, and never seen it before, so here is the question. From JNCIE firewall filter chapter, there is a requirement to limit all primary LSP traffic ( r6-r4) with following the application of the policer to mpls family on transit node. Is…
-
sham link
HI I am learning sham link on Junos and found 2 problems: I have CE1 connects to both PE1 and PE2, while CE2 connects PE3 1: if the backdoor link between CEs is 1GE, which means ospf cost is 1 (backdoor link is in ospf area 0), and this is already the minimum that remote-sham-link can support. So as the result, CE1 and CE2…
-
Contract Job in my company.
Hi guys, I thought I will let you all know about a contract job in my group. Contract is for one year. If my manager likes the person he might hire him full time. Job Details Engineering Job.. QA Engineer for Firewall testing. Min: 3years of experience.. honestly if you do well in the interview it doesn't matter...…
-
VPN problem with Router reflector
Hi there I am doing VPN lab with RR. R4, R6 and R7 are PEs and R5 is the RR. The strange thing is all PEs are sending VPN routes to R5, with the next-hop of self. But on R5, all these routes become hidden, even if R5 could reach these next-hops. Does there any one know the reason? Thanks.
-
JNCIP OLIVE - Logical router "Traceoptions" problem
Hi guyz, i'm using FreeBSD + JUNOS 8.5 Olive for my JNCIP-M lap preparation and i'm wondering how can we see the log or traceoption in the logical. Which version of Olive support this... I don see the "run monitor start" command in the logical router..... please advice. Thanks TRACEOPTION DOESNT SUPPORT FOR LOGICAL ROUTER…
-
Junos images for home lab
Hey guys I just picked up 4 new j2300 routers to add to my lab at home, but looks like they all came with 7.1R1.3 on them and I'd like to upgrade to at least 8.x or newer. Just wondering if anyone knows if Juniper is kind enough to provide these people pursuing certs or if they take the cisco approach? Thanks in advance.
-
New JUNOS Security book
Looks like the new SRX book is up for pre-order. Amazon.com: JUNOS Security (9781449381714): James Quinn, Timothy Eberhard, Brad Woodberg, Rob Cameron, Patricio Giecco: Books Just looking at that makes me want to drop my CCNA studies and get back to something that makes sense to me :D
-
How to use Script file with junos
Hi everybody, I am newby in juniper and I learned junos as second language and now i learn script in junos as second language, but I have problem how to insert script SLAX in olive server to test some commands and scripts. thanks.
-
Back From Jncip lab
after waiting for some days for result. its a passed!!! i have been studying for some times using the study guide, AJNR and most importantly Juniper online documentation. The lab was hard and easy. i had problem with time management. i didnt have time to go back and review it all but i tested and verify all solution as i…
-
Preparing For JNCIE-M
Hi, Anyone preparing for JNCIE ???? Adnan