-
NAT / PAT config conversion from PIX v6 to ASA Software 8.3 and above
Hi folks, I'm currently working on converting some PIX firewall configs to ASA, ahead of the kit arriving with the customer and I don't have a lab ASA to test this on. Everything seems straight forward except NAT is implemented differently on 8.3 and I'm used to doing NAT in ASDM so just working this out. The scenario that…
-
CCNP Security
Hi Everyone, I passed my CCNA Security exam yesterday. I need someone's help in doing CCNP Security can anyone suggest me which off the 4 papers I should choose first. Can I go for Secure OR Firewall. Can anyone give me the latest syllabus for CCNP Security (Blueprint). Thanks in advance.
-
Switches for CCNP
I'm looking at getting some switches for my CCNP lab. I'm currently going through the ICND topics and just looking ahead for when I pass both exams. I've been looking at the 3550 and the 3550 pwr models. Will these suffice for the exam, or would I need more L3 switches? I currently have 2 2950's and 2 2950T's.
-
books for ccnp
Just 2 questions, 1.)Read alot of bad reviews for the Switch OCG book on amazon. Is it that bad ? 2.)Would the Routing TCP/IP Vol 1 book by Jeff Doyle help me with the ROUTE exam?
-
check out CCNP LAB pics
Hello All, This is my rack i use for work and also for labbing. I have (2) l3 3550, (1) 3650poe, (1) 2811, (1) 7200 series chassis, (1) 4507 chassis, (1) 6509 chassis all on the rack. In the one picture I have several 2811 that I was setting up to some routing scenarios. Using teamviewer to access my work pc from home so I…
-
PASSED my ROUTE and TSHOOT exam - Im a CCNP
Hi guys. A couple of weeks I passed the ROUTE exam and today just passed the TSHOOT one. Finally I am a CCNP. For my ROUTE studies I used: Foundation Learning Guide - Diane Teare Some topics from the Official Certification Guide - Wendell Odom The old trainsignal videos from Chris Bryant - I highly recommend the EIGRP,…
-
Packet Pushers podcast with Todd Lammle
Packet Pushers have just released a podcast with Todd Lammle. They go off topic a little bit but there's still some good stuff in there: Show 90 – Talking Career with Todd Lammle For those of you not familiar with Packet Pushers, it's a networking podcast and they cover some seriously geeky and interesting topics at times.…
-
PPDIOO Reference Material
One of the things I love about Boson EXSIM questions is that they give you awesome explanations for questions and also the reference material they are using from Cisco. I had a practice question on PPDIOO for the SWITCH exam and it had a link to a great PPDIOO resource that was in the most obscure place - Unified…
-
IP default-network command help
Can anyone tell me what the point is of this "ip default network" command? I issued it in global config mode, typed "ip default-network 200.0.0.0" and realised that I also had to run the "network 200.0.0.0" cmd on the same router. I did a "show ip route" on the remote router and it gave me this Gateway of last resort is…
-
Help with Eigrp
Hi I’m trying to work out how best to replace two Core switches (Core A and Core B) in our network. Below is the configuration from the Access stack switches and Cores. The aim is to ensure that the network stays available during the change. Looking at the below configuration on our Access A and Access B you can see there…
-
Cisco 3548 XL VLAN Bandwidth question
Ok, so I have been researching some latency issues across my network, and have found something very interesting. All my remote sites that are equipped with Cisco 3548 XLs (Yes, I know they are old and so on), VLAN 1 (the main and only VLAN) is set for 10000 Kb for Bandwidth. Now, when I say all my sites, I mean about 70+…
-
How to know if the Optical cable is LC or SC
This is not a test related question. I know that you can check on the cisco website what type of connector you need for certain Card, but I would like to know if there is a command that you can verify on the IOS that tell you what type of optical cable and transceiver that the card is using. Thanks
-
Terminal Emulators - Colored
I like colors. Makes going through a lot of commands easier and little less boring. Beside using the all-wonderful pipe to cut down on output, is there a terminal emulator that will color words or could be programmed to do such a thing? I use, and quite like, Tera Term. But a little bit of color for the Hostname and what…
-
Pls Where Can I Get SecureCRT For FREE?
-
Helpful lab: OSPF/EIGRP Redistribution controlled with route-maps, prefix lists & AD
Hi all, I've been finding the Cisco Networking Academy lab manual for ROUTE very helpful. but I felt it lacked a more in depth redistribution lab. I though the "Comprehensive Example of Controlling Routing Updates" from page 398 of the FLG would be a good lab, so I created it in GNS3 and added a fourth router to make it…
-
GNS Help.
I just cant get GNS3 to work,i keep getting a message about the IOS image. please i need help on this. Have labs to work on. thnx.
-
SNMP traps on router
Does anybody know of an SNMP trap command that tracks link utilization? I looked over the Cisco.com netmgmt docs and didn't see anything : Cisco IOS Network Management Command Reference - snmp-server enable traps through snmp-server enable traps ospf cisco-specific retransmit [Support] - Cisco Systems I've been looking for…
-
Cisco 1760 memory upgrade
Hi, Trying to upgrade memory for the 1760 router, it has 32 mb on board memory. I installed 128 mb dimm but it only reconginzes 64 mb so total memory it shows 96 mb but it should be 160 mb. I am wondering is it because of the older version of boot rom ! I read some somewhere that some routers also need boot rom chip…
-
Dhcp
hello so i was reading about situations dictate when packet is denied : ( from Secure.642-637.Official.Cert.Guide ) one situation is * A packet is recived from a DHCP relay-agen that does not match 0.0.0.0, or the DHCP relay agent forwards a packet than inculdes option-82 information on an untrusted switchport or…
-
Policy based routing in a vrf
Any of you guys have experience with this? I'm driving myself nuts trying to do this on an SVI and it keeps failing. I've done the same PBR setup outside of a vrf and it works like a charm in the global table. basic configs...sanitized for the web. The next hop in this scenario is reachable and in vrf A. The network I am…
-
Good price on a 2811?
Cisco 2811 Router 64F/256D IOS 15.1T VPN SDM CME 8.0 Best for CCNA CCNP CCIE (008265810181) | eBay I'm looking at getting a good router to work with for my CCNP + CCNA:V studies. Also, I'd like to use it as my main router for my test server in my office. Picked up a bunch of 7940G phones + a couple of 3550's. Figure get…
-
EIGRP key chains
I've only just started learning CCNP stuff but having problems with key chains. They do seem to work partiall. For example I connected R1 and R2 UPTO together using the serial interfaces then implement a keychain,key number and key-string. I kept the names all the same but did read somewhere that only the key number and…
-
CUCM updates...?
I've not seen this documented elsewhere, so I'll pose the question... When applying "minor" updates to CUCM, eg: daylight savings, device packs, etc, do these get applied to the alternate offline partition (and require a partition change), or the current online partition (and just need a reboot)? I know the "major" updates…
-
Finally after 4 years of this damn track its over
I started studying for my CCVP back in the 4x versions, passed the old CIPT, old CVOICE then lost my VOIP job. Worked NOC's and got all the way up to Sr Network Engineer for route/switch, but I couldn't get a Voice job. Took a support job which was a huge step back and started all over getting the CIPT1, and Cvoice on the…
-
ROUTE Passed!
Just passed!!!! Time for beer!
-
CISCO LIVE? is it worth going?
hey guys I am thinking on going to Cisco Live this year in San Diego? is it worth going for the what 4 full days? sounds fun but would I get board in the meetings or is their some good stuff. Can you guys tell me what could be good by going? vs watching videos of it? thanks
-
My Journey for 642-617: Firewall v1.0 (1 of 4 exams required for CCNP: Security)
************************************************** ===================================== My Journey for 642-617: Firewall v1.0 (1 of 4 exams required for CCNP: Security) ===================================== *************************************************** Initial Update: Certification: 642-617 FIREWALL v1.0 Deploying…
-
FIREWALL and VPN Exam Updates
Looks like the FIREWALL (642-617) and VPN (642-647) exams are being updated from v1.0 to v2.0 soon. The last date to sit either exam is May 28th, 2012. The new exam codes are 642-618 and 642-648 respectively. Link: http://www.cisco.com/web/learning/le3/le2/le37/le9/learning_certification_type_home.html
-
Cisco2511
i bought this used CISCO2511 and when i try to connect with consol port it show wierds letters , can any one tell me if its hardware or it can be fixed http://i43.tinypic.com/102tfgh.jpg
-
passed route + lil exam story
hello gentlemen i proudly report back from my route exam, did quiet well but as always bad luck with the testing center first everything went real smoot - even the ? worked but when i had 4 questions to go the whole testengine crashed an i had to continue at another pc with a non US keyboard. i called the attendent agein…
-
BGP Kick Off
This very minute marks the official kick off of preparing to take the BGP exam. Materials: BGP Design and Implementation - ISBN 1-58705-109-5 Internet Routing Architectures, Second Edition - ISBN 1-57870-233-X Routing TCP/IP, Volume II (CCIE Professional Development) - ISBN 1-57870-089-2
-
CCNA/CCNP/CCIE Service Provider Operations
Anyone take these exams yet? CCNA Service Provider Operations - CCNA Service Provider Operations - Cisco Systems CCNP Service Provider Operations - Career Certifications & Paths - Cisco Systems Service Provider Operations - CCIE - Cisco Systems
-
Hardware studies
Hey guys, I'm trying to compile a chart of sorts of switches organized into categories based on usage in the industry. I know this kind of knowledge comes with time and experience, but I'd really like to get a framework going that I can add to over time. I watched a video on youtube about this topic Cisco LAN Switching…
-
Issue with NTP
Hey all I am lost with synching the router to the ntp server. I am able to ping it but it's not synching. Here's the ntp st and asso commands from both routers. Router with issue hq-3560-2#sho ntp st Clock is unsynchronized, stratum 16, no reference clock nominal freq is 119.2092 Hz, actual freq is 119.2086 Hz, precision…
-
eDNS & ASA issues
Hi, I have a customer that is using a asa 8.2 and has just upgraded their DNS server to server 2008 R2. We have intermittent issues where DNS resolution fails as a result of the ASA not supporting eDNS. Reading up on eDNS, it would appear that packet sizes can reach 4096 bytes. However, the DNS inspection on the ASA…
-
Type 4 LSA when virtual link is used in combo with an NSSA.
This has really been puzzling me. The lab it 3-7 OSPF Case Study from the Cisco Networking Academy lab manual. Please see attached topology. * I have redistributed 10.1.1.12/30 on R3 and configured area 300 has an NSSA. * There is a virtual link connecting R2 with area 0. R1 RID = 9.9.9.9 R2 RID = 2.2.2.2 R3 RID = 3.3.3.3…
-
Starting CCNP: ROUTE, SWITCH, or TSHOOT.
Ladies and Gentlemen, Which exam would you recommend starting first? ROUTE, SWITCH, TSHOOT. I've heard from Cisco's Webnar that Cisco exam designers recommends "SWITCH" first. However, hearing first hand from people that studied for the exams would be better. I'm interested in decrease the amount of time I spend reading…
-
SWITCH exam cleared... wowzas!!
Just got back from sitting the exam... holy cow that thing was BRUTAL! I don't deal with layer 2 switching a lot, at least on the enterprise side of the house so I was going in totally on theory and labbing alone. A lot tougher than the ROUTE exam for sure. In all, it was a very fair exam but not for the faint of heart. On…
-
OSPF over NBMA Topology Modes of Operation
Hey All! I understand the differences between multi-point - point-point ect. I found this site helped me out Route My World! » Blog Archive » BSCI: OSPF Network Types (part 2) However I am still struggling on when is the best time to use each technology. The above link mentions Point-to-Multipoint Nonbroadcast * Neighbors…
-
Took BCMSN 2 years ago, how long do I have to pass CCNP?
Hello, 2 years ago I passed the BCMSN (switch) exam and have not worked towards the CCNP any further. I plan to take ROUTE before the start of the summer holidays but wondered if I need to take TSHOOT before the end of the third year? Can anyone clarify on this? Thanks.
-
Passed 642-611 (MPLS)
-
BSCIexmas
hi all, just started my ccnp course and got some material( notes and video) from 2007 just wondering if this can still be valid for use in studying towards the ccnp certification of date?? Any advice will be welcomed. thanks
-
Passed Switch
So I failed Switch by a pretty large margin back in December. But then I figured, might as well get back on the saddle and studied on and off over the next couple months. Today I conquered Switch by a pretty decent margin and it didn't even seem that hard (maybe because I studied my tail off the last couple weeks?!).…
-
CCNP Bryant Advantage
Has anyone used Bryant Advantage for CCNP? Looking to expand my study material beyond the OCG and FLG and looking for some good material. I also find that CBT Nuggets, while good, just doesn't cover spanning-tree or High Availability as much as I'd like (SWITCH).
-
ROUTE exam passed!
Passed ROUTE!! Just got back from the testing center.. Passed first time! This one feels good.. I've been studying since August. Well now it's right into Switch studies. Got a couple 2950's and a 3550, might pick up another 3550 too. Thanks to all who have been helpful with any questions I had, I appreciate it. This is…
-
help function and shortcuts on CCNP exams
since i scheduled my ROUTE exam for Wednesday some of the almost forgotten panic starts to kick in and i wonder if the exam engine supports shortcuts and stuff like tap and ? i am just asking because i have made very different experiences in the past, like on the ICND 1&2 exams it was supposed to work but before the exam…
-
Numbers in called party list on IP Phone
Hi, If a user dials 123 on their phone and that number then hits a translation pattern that translates to 123456 whilst a call is happening the display will show the called number as 123456 but when the call ends in the called party list the user will still see 123 as this is the number they dialled. I believe this is…
-
Auto Assigning dn numbers in cme 8.5 cisco 2821
I'm trying to test multiple phones and I have configured the router to auto assign numbers but not all phones pick up number despite being registered. Cisco 7911, 40s and 60s do but 7941s, 61s, 42s, 62s, 7970s 71s 75s don't. Am I doing anything wrong. Any help will be appreciated. Edited. 7940s and 60s are not picking up…
-
Paul Browning and Farai Tafa - CCNP Study Material
Hello all, I've started my CCNP studies. Aside from the FG, OLG, cbtnuggets, and chris bryant material, anyone used Paul Browning/Farai Tafa's CCNP study guides. I came across them at Amazon's site. For $9.99 kindle edition per guide, it might be a worthy alternate to refresh and review, comes with switch/route/tshoot/101…
-
CCNA/CCNP/CCIE Service Provider Operations
-
BGP NSF/Graceful Restart
-
Carrier Class MPLS or BGP experince
I had some people contact me about a job, they saw BGP/MPLS on my resume, but they insisted they are looking for "carrier class" experience, with that said they are willing to over look this as I have something else they want(Clearance) So to the SP guys on here, what is the difference with carrier level BGP, MPLS, vs a…
-
Switch & Tshoot passed.
So I passed switch back on the 1st. I didn't feel I was entirely ready (but do we ever?). Scored an 868 which wasn't too shabby. Had to completely forget the 10-minute sim rule on one that took me around 30 minutes before I decided I'd done all I was going to be able to do. Passed Tshoot today with a 917. Was fairly easy.…
-
CUCM 8.5 no CUC or business option on install
I'm trying to install cuc and or the business edition into vmware 7. I've managed to get just CUCM going no problem however when I boot the ISO I get no option for cuc or the business edition. I downloaded the iso from cisco.com and made it bootable UCSInstall_UCOS_8.5.1.12900-7.sgn.iso My understanding was I need enough…
-
HP ASE/MASE to CCNP
I completed by CCNA about two years ago, and my HP AIS and ASE (last week), since then I have been teaching and working HP MASE with HP Networking. I have a pile of Cisco routers and switches, along with HP L2 and L3 switches with support OSPF/BGP/MPLS/QinQ etc. I was wondering how much time might be required to complete…
-
Policy based routing question
if I want to route traffic from loopback1 1.1.1.1(r1) to network 2.2.2.2 which is of a router(r2) with a next hop of 192.168.1.1. Shouldn't this do the trick? access-list 101 permit ip host 1.1.1.1 host 2.2.2.2 route-map to-r2 permit 10 match ip address 101 set ip next-hop 192.168.1.1 route-map to-r2 permit 20 interface…
-
CCNP:Voice Certified - and a Return to TechExams!
Everyone, I am pleased to announce that after a year and a half of effort, yesterday I passed the last of the CCNP:V exams (TVOICEv with an 856, which has finally made me CCNP:Voice certified. I joined this forum about three or so years ago when I was just shy of my CCNA (or had I just gotten it? I can't remember), and…
-
SIP Softmodem?
Hey guys, need a little help from the voice gurus on determining if what i'm looking for exists. Sometimes I have a need to dial into a console server using the 56K modem in my laptop. I've got a SIP line bound to an ATA on my desk at work to do this (I work for a service provider and we sell SIP lines so I can pretty much…
-
Cdt
Hey everyone, Wondering if someone could help me out with the Congestive Discard Threshold. I am using the QoS book and looking at the explanation on Pg 281. For example, suppose we have 4 dynamically created flow based queues. Supposed Queue 2 and Queue 3 are completely filled, meaning their CDT has been reached. If a new…
-
Shaping before Queueing?
Hey Guys, Was wondering if someone could help me out with a shaping question. Could someone tell me, do shaping queues come into play before outbound CBWFQing? I am looking at the figure on 377 of the QoS Exam Cert Guide. In this figure, does the queueing happen before the shaping? It confuses me shaping happens before…
-
TSHOOT passed now CCNP
Hello all, been awhile since I have posted here. I finally got off my duff and passed the TSHOOT today. It took a second try to get it done and I could kick myself for not buckling down and reviewing the topology more before my first attempt. Here's what I used in studying to help others out: Cisco TSHOOT guide Boson…
-
Policy based routing in a vrf
-
rate-limit command nice but need more options
hey guys.I am using the rate-limit command and it works great. But I would like more power/options. At nite time available is more pipe size and I want the command to adjust to what is available at nite time after 6pm they can use the full pipe to get the job done. I run backups and want during nite time up to morning to…
-
Passed BGP 642-661
Hi guys, just wanted to let you know that I passed today the 642-661 exam with a score of 899, I got a lot of knowledge on this forum so thanks to all of you :D
-
Ues of Hello on OSPF virtual-link
What is the point of the Hello parameter in the OSPF area X virtual-link command? The Hellos are suppressed so what's the point in specifying value for Hello?
-
Refreshed my Lab (pics)
Well, since i started my CCNP-RS goal.. i decided to add another switch to the family and go for SWITCH exam first. I dont have a rack, so without getting OCD.. here it is.. clean enough to get the job done. goal is 2 months maxx for switch.. i already have an RS background.
-
show ip eigrp topologp
Hi all, I'm at present studying for route. While looking at the "show ip eigrp topology 172.16.0.0/24" command, their is a couple of things that I don't understand. They are:* Query origin flag is 1 * Send flag is 0x0 What do they mean and what do they do. The full output is: sh ip eigrp topology 172.16.0.0/24 IP-EIGRP (AS…
-
Shaping before Queueing?
-
Carrier Class MPLS or BGP experince
-
Wanting to pursue CCNP, quick question.
After I take my ICND2 I'm going to pursue the CCNP. I was wondering if taking the CCNA:Security and Voice would benefit my knowledge going into the CCNP. Voice and Security are both topics I'm really interested in, but, I just wasn't sure if I'd get a certain percentage through the CCNP and think to myself, "wow, i really…
-
Train Signal vs. CBT Nuggets?
I'm looking at additional exam study materials and I'm thinking that some of the videos might be helpful. I'm trying to compare Train Signal vs. CBT Nuggets so that I can determine which is the best value for the money. (Both are pretty pricey for my budget, but I gotta get moving on my CCNP!) Thanks!
-
CCNP Employer Test using GNS3
GNS3 – My Technical Test for Employers « Journey of a Certification Candidate Im not sure if anyone else has seen this: It's designed for employers to test potential CCNP Candidates. Weed people out.
-
ccsp and Electrical engineering major in communication
Dear all , need advise from u, i have an electrical engineering degree major in communication and want to start my career as a network security engineer through ccsp ,does a computer related degree is necessary with ccsp ,and kindly tell me what is the scope of security certification in dubai ,
-
IPSLA issue not routing back to primary link
Hi, I have been having a hardtime with IPSLA, it seems to be pretty straightforward but i can't make it work as expected. I have 2 links with 1 ISP one is a dedicated link over fibber the other is a cable modem. I know is not actually a failover because if the ISP is having issues we won't have internet access at all but…
-
rate-limit command nice but need more options
-
Practical application of EtherChannel/link aggregation
Was wondering if there is a point of diminishing returns here. Trying to do some load balancing across three switches and in doing so I think I have created a bit of a bottleneck with the connection between them. Was just curious from a practical standpoint if there is a point of diminishing returns here.. Using gig pots…
-
ASA Failover using a switch
I've noticed it's best practice to not connect 2 ASA's directly together when configuring failover, it's best to use a switch. This is the way I have it setup in a production environment at the moment, using a 2960 switch as the intermediary device. I'm not totally happy though as now this switch has become the single…
-
0.0.0.0/8 and 0.0.0.0/32 blackhole routes
I have seen in router configuration examples following null routes: ip route 0.0.0.0 255.0.0.0 Null0 250ip route 0.0.0.0 255.255.255.255 Null0 250 How should one understand such routes? First one blackholes all those packets which have destination IP address most-significant byte zero? This is a security measure as such…
-
DTP? Really, anyone using it in a production network?
I was wondering, if anyone has used or is using this Dinamyc Trunk Protocol thing in a production network? And, if so, really? You think its safe to use, does it not contradict any basic idea of having an stable network? I would rather have my trunks on or off. Even cisco recommends having your trunks on to save some…
-
Enough equipment for CCNP & CCIE Lab?
Hi all, I just wanted to verify if I have enough equipment for both labs. I am trying to acquire my CCNP and CCIE within the next couple of yrs. I would like to in 2 yrs but i don't know how quick i'll be able too considering I am new to networking :) My co-workers and I purchased a desktop pc with 3 quad nics 16gb of ram…
-
Cost of summary route on ABR
Hi guys, Just wanted to double-check. When routes that have different costs are summarized on an ABR the smallest cost of out of the routes being summarized is used as the summary route's metric, correct? ...and that cost/metric is included in the Type 3 LSA right? Thanks.
-
TSHOOT need help
Hi; I wanna just ask u a question about TSHOOT ,i failed in this exam 2 times before,could u plz tell me if the commands :show run,sh int..sh ip bgp are noted cuz i'd 447/1000 even i was sure for my answers and i compared my answers with a friend d successed in the same exam. Waiting for ur help ASAP cuz i'll re-pass the…
-
ntp
hi guys! how can I config NTP Server? please say me what is NTP config command? Thank's alot my dude!
-
Ccnp lab
So I will be moving house in about a month, to a nice house with a lovely weather proof shed, Little does my wife relies I have plans to fill it with Cisco gear :) I left most of my old lab at my last company when I left (they told me I could not take the 3750's I was borrowing ), and now only have the following left..…
-
VTP version mismatch
Came across a question in the Boson OCG paractice set that says a switch configured as a vtp server in version 1 will not be able to form an active vtp domain with a switch that is a vtp client running version 2. I labbed it up on 2 3550s and lo and behold, the client that was configured for vtp version 2 downgraded to vtp…
-
QoS Question
I am green when it comes to QoS, I haven't reached detailed QoS in my studies yet so everything I have grasped so far as been from a co-worker. So pardon me if I wording something wrong or seem eTarded. Suppose I have a branch with a full T1 that is prioritizing voice traffic over the WAN with the policy map below:…
-
CCNP Track?
Is it best to start with CVOICE or CIPT1? I am rady to start working on this one.
-
LSA types - question relating to FLG
Hi all, Re: Pages 251-253 of the ROUTE FLG....See attached image. "In area 0, only type 1 and type 3 LSAs exist" - Why is this? Shouldn't a type 5 LSA also exist in area 0 (coming from the ASBR) and show up on R1? Also - What LSA types are used to send link information from ABRs to ASBRs? Type 1 and 3? The book shows the…
-
APs stop pinging after a day of been able to ping
I setup 5 Access Point on POE Switch and the APs work fine. User are able to used them without any issues, but I'm not able to ping the AP or SSH into them. What I do is I shut and no shut the interfaces and then I'm able to ping and ssh into the APs, but that only last like one day. After I come back the next day, I…
-
Suggestion and help..
hi!!!! I recently joined ccnp voice does any one have an idea from where i can get the cipt1 and cipt2 study material and videos with latest cisco syllabus... thanks in advance Regards....
-
Nuances of OSPF over NBMA (F.R.)
Okay, I'm just gonna admit, running OSPF over NBMA networks such as F.R. is kicking my a** lol. So much so, that that's all I've been practicing this week, and that's a good 5 hrs+/day. I've been messing around with it in so many ways that my heads spinning. It's even caused me to order some used F.R. book off amazon for…
-
What is this? 1 192.168.239.5 !a * !a
I did a traceroute and what is the symbol mean? " !A * !A"
-
Ascolta CCNP Training
Hi Everyone, My employer is sending me to the ROUTE & SWITCH trainings hosted by Ascolta, each is a 5 day class. Does anyone have any experience with this company that can speak to the quality of training & labs I can expect? I'm taking the ICND2 next month, then I plan to roll right into the ROUTE material and expect to…
-
Sip
About to go to work for a small telcom. They sell a lot of hosted solutions and resell from a couple sip providers.. Long term they would like to become a SIP provider.. So I am going to be drinking from a fire hose and am looking for any SIP resources that you guys might have..
-
VOIP performance
Hi All, i am interested in your guy's take on how to manage and evaluate VOIP performance on a network? Although i am an a network engineer and i see to it that i get the best flow for Voice traffic, at some points there is this "it was the network" ghost response to all voip problems instead of the actual voip components…
-
help for find some scenario
hi my dudes! please help me for find some scenario for Ospf,Eigrp and BGP! I'm from Iran and I can't buy anything outside of my country please give me some link for free download Tnx
-
Passed Troubleshooting exam
843 not as high as I was expecting. I've been working on this exam for a few months as I have been using the exams as part of my training cycle for CCIE V. This one is not as hard as CIPT 2, but you need a good base in the other exams to pass.
-
OSPF Area Question...I think
Gents, I believe this is more of a design question, but I'm not entirely sure. I've been working on my NP route recently, and labbing out EIGRP, OSPF, BGP, etc. I built a small GNS3 lab for OSPF, and after getting everything configured and working, I started adding different links between routers to change cost, test…
-
Eigrp summary
Hi guys! I have a question? and I'll be glad if you help me. Why Eigrp summary AD is 5? Please help me with your complete answers
-
A good start to a lab?
I currently have a 2611XM running C2600-ADVSECURITYK9-M and I am picking up a 2811 running C2800NM-ADVIPSERVICESK9-M and either a 3550 or 3750 on Monday (both 24 port POE ). The 2811 has Voice NM-HD-2VE (3 on-board DSPs) Port adapter on board, VPN and 2 port FXO. The 2611XM currently does not have any PVDM capabilities…