-
Anyone using ESX for vWLC practice?
Is anyone using the program ESX for doing a virtual lab with vWLCs? I noticed that CBTNuggets has a nugget on how to set this up. I've never implemented wireless, so I thought it would be helpful, unless there's something different and better out there.
-
How to get 900/1000 - Shiv Shankaran Nair
How to get 900/1000 in CCNA exam, please share your tips. Shiv Shankaran Nair
-
Subnetting, VLSM and Summarization practice
Anyone aware of good resources for practicing subnetting, VLSM and summarization? Preferably free sites would be nice. Books a close second. Thanks!
-
Passed the ICND 2 (CCNA R&S)!!!
Hi guys, Just thought I would update you on my progress. After 1 failed attempt I have finally passed the ICND 2 exam achieving my CCNA Routing and Switching. The exam was far from easy and requires dedication. My main source of study was attending a crash course for the ICND 2 followed by reading the Lammle study guide…
-
STP using RSTP terminology?
So after reading through Wendell's book on STP, he says STP show commands, such as show spanning-tree vlan 10, will randomly output RSTP port roles, implying that RSTP 802.1w is being used, not STP 802.1d. According to attachment I included, two different switches from Wendell's book are both running Ieee (802.1d-…
-
Mission Accomplished: CCNA
Passed ICND2 yesterday with 850/811. The test was really frustrating bc cisco doesn't think anything through (see IOS for further frustration). Check out my frustration and study materials via https://wp.me/p6TCWw-uI.
-
STP question
Reading through Lammel's ICND2 200-105 book and everything was going good until he tried to explain Spanning-Tree. To be more accurate, I didin't think anything was too hard until he showed this example: I'm well aware that a swiches Bridge ID is used as a tiebreaker if the accumulated path cost is a tie between 2 switches…
-
Passed the 210-260, My Thoughts
Study Materials ranked in order of recommendation: 1. 31 Days before your CCNA Security exam - Well-structured detailed information. I bought the web version, read the text, and watched the videos to drive each topics into my brain. The quizzes, detail, and easy format make this the best source in my opinion. 2. Boson…
-
Passed Ccent!!
I can't believe I passed today, first time! I used most common study material for this exam such as cbt nuggets and boson just to name a few. I used packet tracer for labs. I actually completed this exam within 45 mins! Now onto CCNA. :)
-
Need Help with a project,
Hi guys , I am in the middle of CCNA1 chapter 8 ,yes a newbie, we are given a project to complete [h=2]2.3 Project Objectives[/h]I must propose to a imaginary company a project example Banks , to give tham an offer to contract me example companies request are: · from the network they will have serives which will support…
-
#ip route
I've been trying to figure this out for a while now and I'm basically stuck it's not making sense and none of my material has an answer for me. Here is my configuration... SW1- (#show ip int br) Vlan2 10.0.0.2 YES manual up up Vlan3 20.0.0.2 YES manual up up Trunk configuration - interface GigabitEthernet0/1 switchport…
-
Question in regards to discovering what ports have a connection
Hello all, Building myself a pretty big lab and trying to do this off the top of my head without looking up commands. So I have a bunch of switches with ip phones and hosts connected to them and I'm connecting them to ports based on which vlan they are in. The phone are in ports 10-15 and so on and so forth. So I logged…
-
Passed CCENT ICND1
Finally did it on 3rd try I used boson and wendell odom's book Used learncisco.net to a lesser extent Thanks to this forum for all the help!! Now on to part 2
-
Subnet question
output Switch(config-if)#ip address 10.1.51.0 255.255.255.0 Bad mask /24 for address 10.1.51.0 now when I Switch(config-if)#ip address 10.1.51.1 255.255.255.0 it allows me to add that ip address to my vlan on a 2960 in packet tracer however if I Switch(config-if)#ip address 10.1.52.0 255.0.0.0 it will accept that IP…
-
Boson for CCENT 100-105
Hello all, Has anyone used boson for the ccent and if so what do you think of the difficulty compared to the actual exam? Many thanks,
-
Progression After CCNA
Hello everyone. So as of a week ago I completed my CCNA R&S! That was my second cert of 2017 with the other being the CWNA, this was mainly to appease my boss and for a little bit of self growth as well. After having passed I have been thinking on how to progress. A lot of my network engineer coworkers, I'm a network tech…
-
About to take the ICND1
I finished the sort of crash course I took on the CCNA over a month ago but due to work haven't been able to buckle down and give studying on my own enough time until now. I was originally going to take the combined test but since I'm pretty much totally new to this domain it's probably best to split them up... there's a…
-
Lammle Frustration
So I just took Lammle's chapter 3 practice quiz and it did not go well........at several points I had to resist the urge to chuck the book out of the nearest window and move on to Odom's book. Look so far I like the actual material in Lammle's book, I like the examples, it's easy to follow along and understand. The problem…
-
Importance of Serial Interfaces?
Hey All, Just wanted to share a question I had in my mind for quiet some time. Are serial interfaces still important today? The ccna still covers them along with the ccnp, on topics like authentication and encapsulation. Has anyone seen them in production today? Ive been in IT for 18 months and in a networking role for 6…
-
Switching on GNS3
I hope this is not old news, but I had always been told that GNS3 could not emulate switches, just routers. I found a tutorial on YouTube that shows how to run Routers, Switches and even ASA on GNS3. The series is done by David Bombal. Below is the link to the play list. Note: He is still adding videos as this is a new…
-
Failed ICND2
With regret, I failed the ICND 2 last week with a score of 790/811. The exam experience was good and believe the simulations really boosted my mark. The areas I thought I was weaker is were I really performed and seem to have a good knowledge in the routing/wan technologies. I already have another date confirmed early in…
-
Passed ICND2 this morning!
Hello All, I have finally passed my ICND2 today. I have been studying all together (ICND1+2) for about 6-7 months. Material Used Odams Cert Guide ICND1 and ICND2 Chris Bryant Videos ICND1 and ICND2 Cisco Netlabs for ICND2 (Really helps with memorizing the configs) Note Cards (I went a little overboard and made almost 200…
-
E1 and it is aggregated bandwidth 2.048 Mbps ,,,how is it calculated
Dear folks All my sources of information seem to concur on is that E1 can provide up to 2.048Mbps. E1 has 32 time slots if all of them are used to carry data or voice then it makes since 32 TS x 64 kbps = 2.048 Mbps But of course TS0 is reserved not to carry data or voice as TS0 is allocated entirely to frame alignment…
-
ITPRO.TV Review & Discount Code
I recently purchased a premium subscription to this thanks to a discount code someone had mentioned on these forums. Boy am I glad I did. I'm studying for CCENT currently and had been using some UDEMY courses. I bought these cheap for $10 each when they had sales so the investment wasn't large. One is by Chris Bryant and…
-
CCNA Cyber Ops
Hello! I have begun my CCNA Cyber Ops studies. I am looking to take practice tests to see where I stand. I have recently passed CompTIA CSA+, which has similar content. Any suggests are greatly appreciated.
-
Why do enterprises not use VTP?
Reading the CCENT Wendell Odom edition (which I love) in preparation for the CCENT and I am in the VLAN part of the book where he states the he will only briefly cover VTP and that it isn't used very much in enterprise architecture. What's up with that? If it's not necessary for the test should I spend much time toying…
-
Looking for ICND2 200-105 Practice Questions please
Hello everyone, I have been studying for a while now for the icnd2, I have been through the odams book, went through the chris bryant videos, got the net sim lab, and im just about finished with going through all the labs. I really need practice exam questions to feel comfortable going into this test. Does anyone have any…
-
210-260 Exam Scheduled
Well, I bit the bullet and scheduled my exam for December 19th... I'm still a little troubled on ZPF but I am sure I will get it before that time comes. I watched all 20 hours of Pluralsight, still reading 31 days, and brushing up on things such as ACLs, ZPF, NAT, and wildcards with CBT nuggets as well as prepping myself…
-
Default vlan settings on a switch
Am I understanding this correctly... every switch comes loaded with vlan 1 as the native vlan?? I understand for security purpose that you should always configure a different vlan if necessary but just making sure I understand that correctly for the test.
-
Udemy Bestseller Is Free Hurryyy !
Hi everyone, As you know I am following Udemy for free courses. Networkel's bestselling "CCNA Labs" course is free for a limited time You can learn Command Line of Cisco deeply with these exercises. So hurry to enroll ! http://www.udemy.com/packet-tracer-labs
-
ARP broadcast on a Cisco switch?
Can I send out a broadcast on a switch to collect all the currently connected MAC addresses?? If so what's the command? Thanks. I tried Googling it but it's hard to find a direct answer.
-
Switch Remote Management Question
I'm taking a community college course meant to prepare us for ICND1, so the final I just took used Cisco-provided questions. There was one question that's really stumping me, and I'd like to get some input on it. For the record, the final is now complete and my grade is posted, so no academic dishonesty here. Which of the…
-
Why Cisco, Why?
Why does Cisco always label there switch product / serial number information on the top or worst yet bottom of the switch? Haven't they learned by now to have it on the front or back of the switch? If I'm paying $6,000 a switch or $40,000 for a router, I want at least the product ID, Serial number on the front, back and…
-
Packet Header Breakdowns
Over the next few days, I'll be updating this link to include different headers covering ethernet, routing, IPv6, etc. Can you guys tell me what you think of the format? Does the format look okay with the explanation inside the packet or should I move the field descriptions into normal page text?…
-
Ccdp
Hello folks. I have been studying for the 300-320 exam for a couple of months now. I am afraid to take the test for fear of failure! I have read so many horror stories about this exam. Can anyone here provide us with any recent accounts of this exam? Thank you!
-
CCENT Voucher for sale
Hi Guys, I have handful of Cisco ICND1 and ICND2 voucher and selling for $135. it is good for 100-105, 200-105 exams and it does not expire until next year December. Let me know if you are interested.
-
Got that CCNA again...finally
Hey folks, I'm glad to say I just passed the Cisco CCNA 200-125 exam. The last time I held the CCNA certification was after passing the ICND1 640-822 and ICND2 640-816 exams way back in September of 2013. Just to recap: I started dabbling in other technologies after that first CCNA then started my Networking career in 2014…
-
Proper startup configuration the Cisco way
Officially what's the proper startup config for a Cisco switch??? #enable #conf t #hostname *duh* #line con 0 #password 1234 #password 7 1234 #exec-timeout 10 #logging synchronous In the Wendell Odom book I have #hostname #line con 0 #password #interface % #speed 100 #exit So what is the initial switch configuration for…
-
Cyber Security Scholarship
just got done doing the per-assessment test from cisco for the cyber security scholarship, scored an 83%, hopefully that will be enough for me to get accepted into the program, already have the CompTIA A+, Net+ and Sec+, just hoping me being a male wont effect the decision
-
Cisco AP Mac Address Filtering
Not studying yet for an exam or anything but trying to learn the configuration of Cisco APs I have an Cisco AIR AP with autonomouse firmware Wanted to filter one mac address only and block it, ( which is a raspberry pi box ) follow the below instructions doing it through the web interface…
-
Passed ICND2 813/811
A pass is a pass but whooo! was that a tough exam. I got 51 questions, and three sims. As you can see from my passing score I just barely passed it. To make it short and sweet I started studying for this test a few months ago. I used the following study materials: CCNA Routing and Switching Complete Study Guide: Exam…
-
Sitting the ICND 2 exam this coming week!!
Hi guys, After attending a crash course for ICND 2 I set myself a deadline and booked the exam. I feel I work better under pressure and without a deadline I wouldn't study as hard as I should. With the date fast approaching, can anyone offer advice on how best to spend the rest of my time working towards achieving the CCNA…
-
Exiting out of router/switch initial config without rebooting device?
I have done all the exercises from a study book I got for the CCENT exam on a network simulator I downloaded online that came with my study guide. Now I am going back and trying to learn everything on the actual Cisco equipment. I got a CISCO router and Switch I bought online that I am playing with. My question is when I…
-
CCNA - Collaboration
Hi Guys, I would like to setup a Home lab for CCNA Collaboration. Please suggest devices to purchase and help me to setup my lab.
-
Public LAN IP Block configuration command
hi all. this is new for me :..and i am trying to figure it out so need help .. My ISP gave 2 mbps lease line and provided wan IP /30 and Public LAN IP /29 Block (6 usable IP). i have 1 cisco router 2811 , 3 server and my private office network. how can i configure the Public LAN IP (6 usable) in router so if if use any IP…
-
Is this a speed mismatch message?
Configuring vlans and I was receiving this message until I configured the speed and vlan to the specific interface... %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/7 (1), with miami FastEthernet0/7 (30). int here is the #sh vlan br output % Invalid input detected at '^' marker. miami#show…
-
CCENT, cable question
Officially what is the test going to want me to know about crossover, rollover and straight through cables? On a switch to switch cable am I going to need to use a crossover cable or has the test been update with the new MDX modules that auto detect cable standards?
-
Preparing for CCENT
I've decided to switch gear considering I have an opportunity to work for an IT services company and go from taking the Security+ next to taking the CCENT. Having the Net+ gives me a solid foundation for both and I've been labbing since I passed the A+. I have 2 months left in my semester at WGU so I'm going to utilize…
-
failed icnd1
failed icnd1 with a score of 774. I needed 832 to pass. Network fundamentals 83 % LAN switching fundamentals 50 % Routing fundamentals 60 % Infrastructure Services 78 % Infrastructure Maintenance 50 %
-
ICND2 Domain 2 Study Guide: Routing
Here is the second guide in the series covering Routing (Domain 2 of ICND2). The free materials listed in the guide are especially good for the value. Again, please feel free to message me with any comments on the format or any recommendations to add to the study guide.
-
ICND2 Domain 1 Study Guide
I planned to build these a long time ago, but I just finally got around to it. Here are my current recommendations for domain 1 on ICND2. If you have any comments on the style or would like to add any content to the study guide, feel free to DM me. I'm especially looking for more free/cheap study resources.
-
CCNA1 Assignment question
For my CCNA1 course I have been set an assignment to do alongside the exams. The scenario is that I have to write up a white paper to provide to a company the differences between IPv4 and IPv6 and why the upgrade is vital for further growth. The first header is to write about the structure of IPv4 addresses. By this does…
-
Free CCENT Training ( Limited Time ! )
Hi everyone, As you know I am following Udemy for free courses. Networkel published a CCENT - ICND1 course which is free for a limited time They are giving also good packet tracer labs in the course that really help to learn Command Line of Cisco. So hurry to enroll ! https://www.udemy.com/ccent-100-115-icnd1-full-course/
-
CCNA Blog
Hello, I want to do the CCNA, CCNP and CCIE beside my Computer Science study. I bought the ICND 200-105 Network Simulator , Official Cert guide ICND1 100-105 and Official Cert guide ICND2 200-105 Routing and Switching, the udemy course CCNA 200-125 from Neil Anderson. Does this package include all I need for the CCNA…
-
Passing the CCNA routing and switching essentials
Hi so i was wondering from someone who has Passed the exam before. What are the chances of passing the CCNA2 routing and switching essentials exam if i was to exclusively study the concepts with youtube tutorials, as im a much more visual learner and sink information in much easier that way ? can most things be covered in…
-
Prepare CCNA Sec exam,request advice
hello, i studied ccna security course and i will take 210-260 exam soon please i need latest valid ****
-
Passed ICND2 tonight
Hey all, I have not posted much on these forums, mostly because any question i had was already asked in one way or another. But these forums were a great asset in the journey to CCNA. Thanks to everyone asking and answering questions!!
-
Anyone making sense of ZBF configs?
Hi guys, Just wondering if anyone else is having trouble fully understanding the Zone Based Firewall stuff? I am trying to understand and wrap my mind around the commands and the configuration, but it feels like I am just spinning my wheels. Has anyone out there been like this and then had things click? If so I would be…
-
Boson Practice Labs for CCNA Security
Anyone used this? I'm a big fan of the Boson practice exams, but I've never used their practice labs. I've combed through the forums, but found almost nothing about practice labs for CCNA security.
-
Cisco Aironet 1700i IOS Autonomous
I hope someone can help me here. I borrowed a Cisco Aironet thats been sitting around in the office, im thinking of messing around with it with my homelab, unfortunately its a lite version and i need an Autonomous IOS version. We dont have Cisco service account so i cant download it from their website. Is there any other…
-
Cisco Aironet IOS Autonomous
Hi everyone. Just want to ask where can I download a Cisco Aironet 1700i Autonomous IOS? We have a spare Cisco Aironet at the office that I borrowed. Its currently running on Lightweight IOS version. I tried to download it on Cisco website but it requires a service contract in which we dont have. Is there any other way to…
-
Please read this post if you’re going for CCNA
I just passed my ICND2 today with a score of 918!!! So happy, I want to share my story here for the benefit of anyone going for their CCNA. This certification is not easy to get, I have spent an entire year studying for it and taking exams. I have spent longer attending Cisco network academy classes through my local…
-
Cyber Ops Question
Sorry if this has been asked, but I don't know where else to ask. I'm in the current cohort, working on the fundamentals test. Are the materials, questions and labs enough to get you to pass? I'm used to reading a book, buying boson and using that to get me prepared for a test. It looks like there's just questions at the…
-
CCNA 1 - Packet Tracer Project Question
Hello, My name is Gabriel and I have started studying for the first CCNA exam (we're doing classes and labs during college). Right now I need to configure a topology with 14 routers connected with each other as you can see in the attached picture. The only steps I must follow are that firstly my range of ip addresses is…
-
Passed ICND1
Got a 962/1000 Used: Amazon.com: CCNA Cisco Certified Network Associate Study Guide, includes CD-ROM: Exam 640-802 (9780470901076): Todd Lammle: Books Never used the CD in it. Just Googled anything that I wasn't feeling strong on. Also used some YouTube videos, packet tracer, and this forum. Overall, I felt that the exam…
-
CCNA Routing and Switching 200-120 Network Simulator
Does anyone have any coupon codes or anything for a discount on the CCNA 200-120 net sim labs? -or- alternate lab recommendations for the ICND2 Test. - haha I found the Cisco black friday specials. I'm gonna go crazy! 55% off 2nd item after first purchase. code: BF2017
-
1841
Hi All, I have 1841 router. I'm sharing the details. Please suggest the Ios version & Can I use this routers for Voip. Router>sh ver Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(3f), RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco…
-
Equipment for Lab
At work I have access to some decommissioned network equipment. I have already taken home 2-2811 Routers. I also have access to up to 3-2950 switches. Would this be sufficient for a CCNA RS lab? The 2950 switches have a sticker on them that say they have ios 12.1 on them. Can these be updated to ios 15, or are they to old?…
-
Studying with more than one book
Hello guys, I have just started studying for my CCNA R&S and I am wondering if my book, which is by Todd Lammle 200-125 is enough to get certified. I know some people from my school that are studying from both Todd Lammle and Wendell Odom. Is that a good or bad idea? What have Todd Lammle and does not have Wendell Odom?…
-
CCNA Renewal
I passed the CCNA test over three years ago, how do I renew that? Do I have to take the test over again? If I go for CCNA Security will that renew the CCNA?
-
Cisco 2620 XM
Hi All, I have cisco 2620XM router. It has 1FE port. Can you suggest the module to get more FE ports?
-
Routing and switching Sharing what i learned.. hope im ready for exam
Hey guys im new to the tech world + these forums and i am also new to the CCNA. I just got finished reading all of both ICND1 and ICND2. But i wanted to make sure that i have a strong foundation before even attempting the exam. I made this post because not only do i want to understand Routing and switching but i also…
-
OSPF / LAN question in Packet Tracer
Hi,I'm trying to setup a WAN in packet tracer. I need to use OSPF and I'm able to ping between my WAN routers and inside each LAN, but now outside the LAN. I've set up OSPF first on the routers and VLANs on all the LAN segments.Thanks in advance.
-
Ccna r&s passed today!
Well, with the help of many sources found here and a few others, it went well. I scored in the 900's. I am not sure if I am allowed to place the specific score here; however, I did score quite low on the IP Services portion which I felt I knew the 2nd MOST from all the other areas. One thing though is that I can't see how…
-
Cisco is not mailing certifications anymore
Back in 2012 they did mail the certification automatically once you passed. Not so much is the case anymore. I was waiting for my CCENT and nothing showed up. I contacted Pearson's Vue and was told Cisco is now charging to have a copy of the certificate, which is sort of neat IMO to have in one's office. Printed via mail:…
-
first time router config
Hello, I have a cisco 892 with default configuration. I'm trying to set this up between my ISP router and my firewall since i dont have a lab environment. The ISP router has an IP of xxx.xxx.xxx.49/30 so the WAN interface on my 892 would be xxx.xxx.xxx.50/30 with access to the xxx.xxx.xxx.64/27 subnet. I can get internet…
-
help with subnetting
Hello, i am a sophomore at a junior college for Computer Networking and was wondering if anyone could lend me a hand on how to subnet, iv actually been learning how to for sometime but nothing seems to stick and i am completely lost. The main part i get lost at is bit borrowing, i can see an Ip and break it down to binary,…
-
Subnetting
What is problem ? where i am doing wrong 192.168.3.0/27 32-27 = 5 2^5 = 32 block size 192.168.3.0/27 192.168.3.32/27 192.168.3.64/27 192.168.3.96/27 192.168.3.128/27 and i am getting this on cisco packet tracer Thanks
-
Use vlan1 in router
What is the use of vlan1 in router ?
-
ExSim-Max for Cisco 200-125 CCNA Still Good in 2017?
I am looking to take some quality practice tests this month as I am just about ready for the exam. This practice exam is suggested pretty highly on these forums but I am wondering is it kept up to date? The reason I ask, is the exam listed in the title that is found here: 200-125 CCNA Routing and Switching Practice Exam |…
-
Differences in training for Cisco compared to Palo Alto
My company is a huge Palo Alto shop. Thus far I've had the opportunity to train and learn on Panorama and their hardware. I've enjoyed the experience, the question I have is how much of a difference can I expect between the hardware? I know Palo Alto has the application filtering going for it which can be great depending…
-
Passed CCNA Cyber Ops
I'm so happy to say I passed the CCNA SECOPS exam first try, but just barely. :) I'll try to give you some advice on preparing for the exam and a little about my experience. I'm not new to the field, but it's been quite a few years since I've been in it. (My previous experience in IT was heavy into networking.) I've been…
-
Failed 210-255 Implementing Cisco Cyber Security OPS
Hi Everyone, Very shocked as today I failed 210-255. I am completing the course self study and used the following materials to revise: Omar Videos (Live Lessons) Cisco 210-255 Text Book Regex Guides NIST Guide and other various websites. I found the exam very easy so was very shocked when the screen said I had failed! I am…
-
CCNA Security Renewal question
Hi guys, I need a little help in making sure I am reading Cisco's renewal steps correctly. In order for me to renew my CCNA-Security level I only need to pass the current Security exam, or ICND2 exam, or CCNA composite exam or one of the CCNP exams? If so I may just take the ICND2 exam and then begin working on the 300-101…
-
Ntp
can someone please explain to what is the difference between the two commands 'npt master' and 'ntp server'? I am also confused aobut the output from 'show ntp associations'. What is the difference between address and ref. clock? and does it mean anything that *~ appear before each output on all the routers in the topology…
-
210-255 Help Required...
Hi Guys & Girls, I have a few questions which I have been unable to find a "clear" answer to using the CCNA Cyber Ops Official Guide & the videos. Can someone explain these types of security analysis methods... 1) Deterministic 2) Probabilistic 3) Descriptive (is this even a method as I can't find it in the text anywhere?)…
-
Decided to get my CCNA Security...now what?
hey guys, I got my CCNA R&S in 2014 right before I finished my undergrad degree. Since then, I got a job as an application developer and haven't had the chance to use my Cisco knowledge. My CCNA R&S is up for renewal this December and I would like to get my CCNA Security if possible by then. I currently am also getting a…
-
Question regarding a lab
So I was going through ebay to get myself some stuff to set up a lab. on the routers I found 3 2811 with wic1t modules and ios 15.1 for 100£ that i think it a pretty good deal. on the switches now i can get the 3550 for 75£ but they dont support the ios 15 on the other hamd the guy offered me the 2960-24TT-L but they only…
-
Passed 640-911
I decided a while back I would take the 640-911 to re-certify my CCNA R&S since CCNP Route is still out of reach for me. Realized on Saturday the last day to test is April 11, 2017. Took the test today and passed. Now I've got another 3 years I can pretend I'm studying for the 200-155 and/or 300-101 :)
-
WHY!?!? OSI - DoD - TCP/IP Models
So, I took Cisco Classes (networking 1-4) at my Community College back in 2013. I did very well and aced each of the 4 classes... But, of course, life through a curve ball and here I am and it's almost 2018. I picked up all the recent Cisco books, ICND1 CCENT and ICND2 CCNA Study guides and began reading ICND1 CCENT. One…
-
Passed CCNA Cyber Ops
Hello everyone! I am very happy! Today I passed the SECOPS exam! My resources were: * Scholarship contents * Official books (both SECFND and SECOPS) * NIST documents (61 & 86) * Google (searching exam objectives) Thanks! Regards!
-
Is it possible to turn a switch into a HUB?
Does anyone know if you can make a Cisco switch so it acts like a HUB?
-
Differences in Router/Switch IOS and Security Appliance IOS?
Perhaps someone can clear this up for me, but in my limited experience working on security appliances, it seems the IOS is different than on routers and switches. For instance, there's an "expert" mode in the CLI. These security appliances had Firepower on them, and I'm unsure if Firepower is a full appliance OS or just…
-
another CCNA method
One can
-
Starting CCNA:Security
Add one more name to the list of people starting the CCNA:Security. I passed ICND2 this morning, and IINS is my last exam to complete my degree through WGU. Good luck to everyone!
-
wireless controller (what are they?)
Can someone kindly tell me what is a wireless controller? I am going through the ccent 100-105 topics and don't really know what this is. Is it like a home wi-fi router? Please help. Thanks in advance! Cheers, -Benny
-
CCNA method
I'm making headway in studying for CCNA exam.
-
Cucm
I have three phones that are all configured and working, along with a server running vmware and some VMs. I can ping all three phones from inside the windows server vm and then go to register the phone in cucm and only one auto populates. The one that did register however, has no ip address attached to it? And when I…
-
CCAN Sec 210-260 Passed
Hi all,I passed the 210-260 exam yesterday on my second attempt. Resources I used: OCG (Not great but still worth a read through) CBT Nuggets CCNA Security course 31 Days before your CCNA Security exam INE CCNA Security course (Didn't like the instructor so used CBT mainly) Boson Practice exam GNS3 for creating my own labs…
-
210-260 pass
Passed with a 8xx score (passing is 860 I think) 1) Chris Bryant's Udemy course, which helps a ton if you follow his labs and complete them on your own using packet tracer. 2) FedVte - Not as good as Udemy 3) Official Cert Guide (Front to back 3x) Started in Feb and spent most of my time using packet tracer and replicating…