-
FXS/FXO card problem
Hi, I have 2801 router with 128/64 memory no PVDM, I buy two VIC-2FXO and VIC-2FXS, but when I plugged in to my router and router starting booting I get below messages: - Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE 0X003AA110 public buffer pools 0X00211000 public particle pools 0X00020000 Crypto…
-
which CCNP library should i get
Amazon.com: CCNP Routing and Switching Official Certification Library (Exams 642-902, 642-813, 642-832) (Certification Guide Series) (9781587202247): Wendell Odom, David Hucaby, Kevin Wallace: Books: Reviews, Prices & more or Amazon.com: CCNP Routing and Switching Foundation Learning Library: Foundation Learning for CCNP…
-
LAB Question, I know again :(
Hi soon , I start my ccnp course, (as soon as I pass ccna exam !), I founded ready Lab for ccnp study on ebay and hopefully you will advice me :) . Or maybe is better buy each device separate, and you can advice what I should buy? I'm gonna spend about 500£ mor or less so is about 790 USD will be enough? please find below…
-
SWITCH Booked
I have officially booked my SWITCH exam for the 26th. I will let you guys know how I do!! Wish me luck, I will need it!
-
CCNP fresher, looking for a job
Hallo friends, Just now I have achieved my CCNA & CCNP certificate. I am a networking fresher, I don't have any hand on exp of cisco routers. I am an electronics engineer from mumbai university. I am totally confused in choosing a right job. In which companies in INDIA should I apply & what kind of job & salary should I…
-
EIGRP over MPLS
Is it possible to do EIGRP over MPLS VPN?
-
Pvdm
Hi, For the home LAB with 2801 router, is the 1xPVDM2-8 is enough or should I put another 1xPVDMP2-16 with him.
-
SWITCH study group
Hi, Im looking to put some labs on here so people can use and then discuss findings. Im currently studying for SWITCH and looking for some interaction on the labs as and when the group completes them. Maybe get an IRC chatroom going at the same time... Just an idea, would anyone be interested? Thanks, Jimmy
-
Question about my CCNP study material
Hey, guys i have a quick question i'm not sure if i purchased the wrong library or not. I'm Starting to study for my CCNP so i decided to purchase the CCNP quick reference. and i also purchased CCNP Routing and switching foundation learning library: foundation Leaning for CCNP (642-902,642-813, 642-832). Should i actually…
-
Yes another lab setup question!
Alright before someone flames me I've looked and can't find the answers. :) I'm currently studying for IIUC and then plan to go on to ccvp probably cvoice 8 first. I currently have: 1811 2611 non xm 1760 with CME loaded and max ram/flash. no vic cards 2950C 24 port switch 2900xl switch According to this thread…
-
Security (CCNP Security)
From an email I received earlier this morning... I wasn't aware of these forthcoming changes... I thought I' pass this info along! ...Cisco is pleased to announce major revisions to its popular Voice certification track and professional-level Security certification to align with evolving job roles, technologies, and…
-
QoS not going anywhere for CCIP
-
How to see multiple contexts thru CLI
Hey guys I have logged into our ASA but I only see a small portion of our conifgs. I mean when I use the ASDM I see much more. How can one see the other contextes or instances of the ASA 5510 firewall. I know I am not seeing everything thru the Manaagement1. In the ASDM there is much more and we have 3 instances/contexts.…
-
pasting config to switch
Hi, When replacing a failed switch, my standard method for getting the config on to the new swich, is to console in and do a simple copy/past from a backed up file. I find that this can cause an issue with large files, with lines getting missed. do other people come across this and if so do they have any solutions for…
-
Just Halabi's book OK for BGP test?
-
CVoice lab setup
Hi, I found in CCVP by (Kevin Wallace) the (CCVP Lab Equipment Recommendation) document and it very useful, but my question is should I need all this stuff to setup my CVoice lab, it is very expensive. Hardware need for CVoice lab by (Kevin Wallace) -Cisco WS-C3750-24TS 24-Port Cisco Catalyst 3750 Switch #1 -PVDM2-8 Packet…
-
Your CCNP approach
When I did the CCNA I studied for each exam seperately because one built on the other but such is not the case with CCNP. For those of you studying or for those who have already passed did you study for 1 exam at a time, take the exam, then move on? Or did you study for multiple exams at once then just review before taking…
-
Design guide from CISCO
I don't know if any one else has found this, I got an email a while ago with it, and another site just reminded me about it. If you are lost with designing networks and the whole SONA, IIN, our just want some infor on how to go about building a cisco network, have a look. Small Enterprise Design Profile Reference Guide…
-
Some of you might get a kick out of this...
-
Going out a PIX and back in
Hi...I ran in to this problem a number of years ago and cant remember how to fix it. Assume a server is on the inside at 192.168.123.1 and has a static translation to public address 12.12.12.1. When hosts on the inside look up the IP address of server A via DNS, they get 12.12.12.1. To connect to that, they have to go…
-
How to route subnets?
I came across a request from a client at work and thought I'd ask for some help solving it while I study for my ccnp. He would like his public facing router to be assigned one of our public IP's from a /30. Then behind that router he would to be given one of our /29's for one of his networks, and a /28 for another one of…
-
Help needed with BGP
Trying to do this in a lab with MPLS. I had ip connectivity between the CE and PE. When I logged into the PE and added the command " ip vrf forwarding site1" , it removed the ip off of the interface facing the CE. so I re-added it. Ever since then, the PE and CE have not had IP connectivity. Because of this, I cannot…
-
EIGRP Summary Route AD
TE, I'm currently reading the ROUTE Foundation Learning Guide. I noticed early in the book (pg. 42) lists a table of administrative distances... nothing out of the ordinary but I noticed EIGRP's summary routes has an administrative distance of 5. I didn't recall ever seeing a 5 without it being manually configured. I…
-
Creating a "back door"
I know this isn't a CCNP topic (might be more of a CCSP really), but I figured I would ask here. Right now, our environment only has one way in, through the front door/DMZ. A firewall cluster that is the front for our websites, remote access, VPN tunnels, etc. works great, however for support purposes, if the firewall is…
-
One Exam a Month
TE, I couldn't find anything on TE regarding the site One Exam a Month. The site is run by Kevin Wallace, author of many Cisco Press books... This month his focus is on QoS (that's why I posted in the IP forums) with a lot of video instructions... Enjoy... -Peanut
-
TUC study material
hello guys, I am moving on to CCVP final piece, and need advice for study materials. I usually get the Cisco Press official study book and CBT nuggets vids, but i could only find the CCVP TUC Quick Reference Sheets, anyone coudl give me tips ont hat one? tx a lot
-
One Exam a Month
-
HSRP state machine
Understanding and Troubleshooting HSRP Problems in Catalyst Switch Networks - Cisco Systems On this diagram there is a transition from listen directly to active. The code references an event where a router in the listen state receives a lower priority hello from the active router, and subsequently enters active state…
-
Frame Relay VS MPLS
Hey guys, sorry for being MIA.....been quite busy....haven't had a chance for air!!! Anyways, I wanted to create a constructive thread on Frame Relay VS MPLS. Not so much FR but really all the benfits of MPLS. I may have an opportunity to work with migrating a site from FR to MPLS so I want to fully understand the benefits…
-
vm
Thanks!
-
HSRP with switches... one link dies
What happens in this scenario? http://grab.by/grabs/f610f49ab0358ae7c1b20abd5892c965.png Circle 1 and 2 are switches, rectangles are servers. HSRP is running between Switches 1 and 2. Switch 1 is active, switch 2 is standby. I understand that if switch 1 dies, switch 2 will become active and begin forwarding traffic. What…
-
OSPF issue
I have a lab emulating our actual environment at work. The actual technology is metro Ethernet, but in this lab, each device is interconnected via a regular L2 switch. I am having an issue... Background: sl-ce is headquarters. fa-ce and qs-ce are remote sites colo-ce is a test site/hot site The issue: colo-ce is…
-
Ask a CCIE
What is your biggest question about computer networking? Are you concerned about achieving certification? Is there some topic you want clarification about? Do you want to know how to expand your knowledge? It could be anything, even if you think it is silly. Here is your chance to ask a CCIE. Come to a free webinar this…
-
Cvoice: Minimum number of routers to play with GK?
I'm wondering what the minimum number of routers to implement basic GK functionality is. Is it 2 (a GK and a GK)? or is it 4 (a GW and a GK; and a GW and a GK) ? TIA, h.
-
Are there any CCNP bootcamp schools that are accredited?
The company I work for will pay 100 percent of my training as long as the school is accredited. Can anyone point me in the right direction? Thanks
-
ok voice guys, cough up your labs and topologys
I am now pursuing the CCVP. First plan is to get the CVOICE. I am going to buy and build a CCVP lab. I want to make a CCVP lab which will be utilizing my GNS3/Dynamips Server and will be utilizing GNS3 as much as possible. Can you guys help me out in all the other materials I will need for a CCVP lab. Are there any good…
-
Buffer Misses
One of my main routers is getting a bunch of buffer misses, resulting in packet drops. I have pasted output below: Genoa-C3845-Rtr# sh buff Buffer elements: 1117 in free list (1119 max allowed) 445357378 hits, 0 misses, 619 created Public buffer pools: Small buffers, 104 bytes (total 176, permanent 70, peak 230 @ 7w0d):…
-
ipv6 tunneling
Can anyone explain why automatic tunnels can't support IGPs?
-
Taking Switch tomorrow
Those of you who passed Switch what would you recommend hitting hard the day before the test. I have put in a solid 4-6 days of studying and 11 years experience with vlans and switching in general. I hit the foundations guide hard with vlan implementation etc. I am currently struggling somewhat of remember the different…
-
New 6506... no copper
Hey techies-extraordinaire... Need help with a simple (I hope) issue. Just landed a pair of 6506's that will replace our existing 4500 cores. The new 6500's have nothing but 10Gig fiber modules... no copper to speak of. Anyway, I took them out of their wrappings and powered them up in our lab. I'd like to take the IOS to…
-
TSHOOT - Layer 2 and Layer 3 topology Question
Like I post it before I'm trying to complete the TSHOOT topology on GNS3. So far no need on hardware, just GNS3. I'm stuck on the Layer 2 and Layer 3 topology config. If you see the second page on the TSHOOT topology PDFhttps://learningnetwork.cisco.com/servlet/JiveServlet/download/52366-8599/TSHOOT Exam Topology.pdf As…
-
EIGRP Topology command
Hello Experts, I had a Question about EIGRP Topology command: when we do a: router# show ip eigrp topology Resuts: we see multiple dest networks which has successors routes to reach the network. Ex: P 10.20.10.0/26, 1 Successor, FD is 9827342 via 10.20.5.1 (9827342/28397), serial0/0 In this, the subnet mask = 26 or…
-
BGP before ROUTE?
Has anyone here ever taken the BGP exam before ROUTE/BSCI? I have been studying BGP in preparation for the ROUTE exam and have really enjoyed. I am thinking about going ahead and taking the BGP exam while everything is fresh. I see that most people seem to take the BGP+MPLS composite which makes sense financially. I admit…
-
Route vs switch
I passed ROUTE last week and now I've already read the entire SWITCH Cert Guide, which I know is missing a lot of information.. SWITCH is sooo boring, any agree? And what did you SWITCH passed guys use to remember all of the different attributes of all the different redundant gateway protocols? I am trying to find a…
-
CBT Nuggets ROUTE - Lab 1 (EIGRP)
A little confused about something on the first CBT Nuggets lab covering EIGRP config. I have three routers connected, as shown here: Whoops! - TinyGrab I have EIGRP (AS90) running on all three routers. All recognize each other: BB#sh run | s eigrp router eigrp 90 network 10.1.24.0 0.0.0.3 network 10.1.34.0 0.0.0.3 network…
-
What path to take?
I just passed my TSHOOT exam on Monday of last week, finishing my CCNP. I don't want to lose my momentum and ambition to continue learning, so I'm already looking into what cert I want to pursue next. The way I see it, I have a few options. I can either immediately pursue my CCIE route/switch, or I can go for some more…
-
Cisco Wireless Access Point Marketability
I just want to rant about Cisco Wireless Access solution...
-
Can call outbound, but not inbound.
I am configuring my first production gateway from scratch. Until now I had not ever experienced an actual PSTN connection. I'm running into an issue I know I should be able to fix... but I'm going to go ahead and make a dummy out of myself and look for advice. Basically I configured the gateway for MGCP and got the PRI…
-
2611XM and 12.4 IOS
Hi all, Wonder whether you can help me. I've got 3 Cisco 2611XM routers for my CCNP lab. Now I am wanting to get an IOS 12.4 to work with them however they are all 128/32 in specification Is there a 12.4 IOS that can fit on the flash...or do I have to drop back to 12.3 or even upgrade my flash to 48? Any help appreciated.…
-
Crypto Map
Sitting for the ROUTE exam on friday and have run into a question that seems to go either way based on the IOS. On olders IOS's the crypto map command needs to be on the tunnel and the physical interface On newer IOS's the crypto map command goes on which interface? Physical or Tunnel...........Any guidance is greatly…
-
dhcp snooping
HI, If dhcp snooping is turned on and the rate limit is 10 packets per second then what counts as a packet? ACK, INFORM, REQUEST, OFFER, DISCOVER? Is there some kind of official description for this by any chance?
-
Interface resets on an eth interface?
What, if anything, are Interface Resets indicative of on an ethernet interface? Usually, I see perhaps a couple on an interface whose counters haven't been reset for a long time. Now, I'm having sporadic but major problems with an c1812. It loses OSPF connections to it's neighbors, sometimes it seems it just loses the…
-
MPLS questions
Hi, I need something cleared up. We have two networks at work, using 2 different providers. One is Sprint with MPLS. The other is Qwest with MPLS. If I tracert some of our networks through Sprint's MPLS network, I can see the PE and P routers all along the way. If I do this in Qwest's MPLS network, I never see any P…
-
Hsrp
Say I have 3 vlan inter faces VLAN 10, 20 and 30 each with standby 2 ip address 192.168.x.254 set so they are all using the same stand by group number. what I am trying to work out is what it the interaction between the different interfaces. is each seperate vlan a sepetate stand by group (dispite the same group number) or…
-
vrrp issue
Router1: 2901#sh vrrp all GigabitEthernet0/0 - Group 1 State is Master Virtual IP address is 172.16.254.254 Virtual MAC address is 0000.5e00.0101 Advertisement interval is 1.000 sec Preemption enabled, delay min 3 secs Priority is 110 Track object 1 state Up decrement 15 Authentication text, string "sapphire" Master Router…
-
CCNP Wireless
Hello, Just wanted to let the admin/moderators know that We need a CCNP Wireless Thread for the Professional Level Cisco Certifications. We also need a CCNP Service Provider Thread as well. Also, I will be taking 642-731 exam, CUWSS tomorrow. Exam looks pretty easy and I have used the student guides for prep. Thanks!
-
Novice question on ASA 5505
Hey CCSPs, I have my ASA5505 at home and I am going to put a cisco border router ahead of it and then create my DMZ SL-50 and then SL-100 for internal LAN and of course SL-0 outside. I am not sure about this but I might have it. Okay. A security level 0 cannot breach a security level 50 unless a static NAT mapping is setup…
-
My tunnel is active...or is it?
Hi all, I'm having some issues with my site to site VPN, but I'm not sure whether the issue is my config or not. This is very strange to me, but I'll post up the important part of the configs here. The two endpoints are an 881 and an ASA 5510. 881: crypto isakmp policy 10 hash md5 authentication pre-share group 2 crypto…
-
Switch doesn't recognize vtp modes
I'm wanting go paste in a config template into this switch, but it's rejecting it. Apparently, it's not accepting the command "vtp mode transparent" in global config mode at the very beginning of my config. I then do "vtp ?" and the only options are "vtp file" ("Configure IFS filesystem file where VTP configuration is…
-
need help to setup my CCNP home lab
[FONT="]Hi guys,[/FONT] I wish you well, my friends I found this tow lab’s with same cost to study my CCNP v.6 but I’m not sure which one is good for CCNP v6 requirement ? Please tell me which one shall I chose? And what is the difference between 1841 and 2600 series from performance point view and if you have any…
-
CCSP - New Exams
Guys, I am getting really confused with all the news about the new CCSP exams. Can someone send me the link of the up to date exams so I can get cracking with this please? Thanks in advance :)
-
CCNP Route scheduled...
Oh man, I hope this goes well. I will be taking the route exam on Oct. 7th. Does anyone have any handy way to convert IP addresses into Hex? I found this site: Convert IPv4 into IPv6 - Fnode Networks Which does a fairly descent job of explaining. I use this for my subnet / prefix questions with IPV4 and it helped…
-
Bouncing ports
How do you find if a particular port is bouncing or not? It's been so long since I've checked it, I've forgotten.
-
Solving a network/ethernet loop
If you're experiencing an ethernet loop on a switch(es), what's the troubleshooting process for this? I remember this in my CCNA studies, but it doesn't come to me. I'm researching it, also, in the meantime. Thanks.
-
CCNP Home Lab
This is the following equipment that I have from my CCNA Studies 2 2620XM Routers max out on Dram/Flash 1 3640 Router Max out as well. 2 2950 24 Port Switches 1 2950 8 Port Switch 1 851W Router I am looking to get a 3550 Switch not sure if should get one or two and what is the difference between SMI/EMI. I believe can get…
-
new IP address from new subnet to a server without downtime
Despite the topic, this problem should be suitable for "routing and switching" forum. I have a file server which I have to move from one VLAN to other and terminate IP in other router. Currently it's on VLAN 10 and interface of the file server has IP address 192.168.10.2. New VLAN will be 20 and new IP address for file…
-
I have a question regarding Cisco Unity call handlers
I want to have a scenerio where a call is routed to a specific unity number (3002) and after the caller is played a greeting they are allowed to input digits to get to a subcriber's extention and establish communication. I have done what I could but so far it isn't working. Can anyone help me out?
-
SWITCH Passed!!!
Hi TE, I sat the SWITCH exam today and passed!!! WOOHOO!!! I must say that the pool of questions that I had was really keen on attention to detail. In addition, I would highly suggest the reading and rereading of the Foundation Learning Guide to all that are interested in this exam. I did my very own review of the…
-
BGP before ROUTE?
-
CCIP done
Well...I retook bgp + mpls today and passed. After the fail at Cisco Live it felt pretty good. Like Mike said, they definately "make you work for it," but the exams are pretty fun at the same time. I think I will turn to IE studies now, and develop a plan in the next few days that I can hopefully stick with! Thanks all.
-
ROUTE labs?
I have been labbing a lot lately. I'm noticing that a large amount of time is spent on lab setup, etc. A lot of the time I'm sort of just "freestyling" it, though. Coming up with my own labs on the fly. I think I could save a lot of time with pre-made lab questions, where I emulate the depicted setup, then solve it with…
-
Cisco ASA loosing connectivity
Hey guys I am not too familiar with Firewalls and need some help. The situation is this. Spectrum is showing connectivity lost to the firewall. It seems that the connection somehow is dropping to the primary link. The default route point to x.x.x.121. vlan2 is configure with x.x.x.1. I am able to ssh into the firewall and…
-
3550 on its lasts legs
I have to switch it on/off several times to get it to boot. Once up, it is fine unless I turn it off. If it's off for a while, I have to turn it on and leave it on for an hour until it "warms up". Then I can shut it off and back on and I can go through the whole shut off/turn on thing until it boots OK. Does it sound like…
-
Finished CCNP
Passed the TSHOOT today. Passed with a 794, just 4 points above cut-off. Probably could have done much better but I didnt really prepare well. Especially the network maintanance models and higher level management part. Spent the night before the test playing Starcraft 2 with some friends. I really like how Cisco did it…
-
New CCNP books
Hi all, I've already got the CCNP self study guides for the routing and switching part of the old exams. I notice that there some new books for SWITCH and ROUTE foundations. Has the material and topics changed so much for me to go and re-buy these newer ones or can I make do? Cheers
-
I sat the SWITCH today and...
I PASSED!!! WOOT!!! WOOT!!! I'm glad I finally knocked this one down! I've been dreading this exam this whole month. Now on to that TSHOOT exam!!! Regards, David
-
EIGRP Question
Just wandering what the best practice is for enabling eigrp on the desired interfaces you want participating. I understand you would want to be direct as possible, but is it preferred to do it per int, or if you do have interfaces that all fall into a group that you can ues a wildcard mask that will in gulf all interfaces,…
-
Problem with Putty
I downloaded Putty to use with my home equipment, but it's been so long since I've used it that I can't remember its settings. I have a dongle adapter for my serial connection from my switch, so I have it plugged into my USB adapter. I basically need the settings for Session and Serial (I imagine) if someone can tell me…
-
FXO Port only answers sometimes
So I have an VWIC 2FXO card here, being serviced by a PVDM-12 in a 1760 (which I realize the PVDM-12 is unsupported but it works fine with the digital lines). It is connected to an analog line off of our avaya PBX, loopstart, nothing fancy. Here is the config: voice-port 2/0 connection plar 1000 When I dial in to it, I can…
-
QoS
So I didn't know where to put this but this is something I noticed but it looks like the QoS exam is going away unless there is some replacement to the exam that they haven't mentioned it. Certification Exams - IT Certification and Career Paths - Cisco Systems
-
private vlan question
just to clarify what i'm reading here. a primary vlan can support only one isolated vlan AND multiple community vlans at the same time? so multiple isolated vlans will not work within one primary vlan?
-
Cisco Router Configuration - Security Hardened
Hi All, I would like my Router configuration below to be secured and protected as much as possible, can you help me acheive this. I already have a the basic Cisco IOS Firewall configured, what other features can I add? ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service…
-
CCNP 2011 Pursuit
Howdy! So I'm going to pickup where I left off in January, 2009 (CCNA) and pursue the CCNP this coming January. To prepare for that I've already purchased the new CiscoPress books on the three exams but I've been having trouble finding the right equipment. I wanted to purchase the hardware over the course of the next few…
-
Syslog question
Hi, We are using "logging ip access-list cache" for our ACLs. So when you run show logging it displays messages such as those below: Sep 23 09:19:17.850 BST: %AFLSEC-6-OALP: denied tcp IP ADDRESS(PORT) -> IP ADDRESS(PORT), 1 packet Sep 23 09:19:17.946 BST: %AFLSEC-6-OALP: denied tcp IP ADDRESS(PORT) -> IP ADDRESS(PORT), 1…
-
QoS
-
LAB topology
Hi, i have the following hardware and i dont know what topology i should build for my CCNA-V / CCVP Lab. Best should be a "real worl" scenario. 4x 2950 Switches 1x 2970 Switch 2x 2610 XM Router 256/48 RAM (Both with WIC-1T and the second with another WIC-2T Card) 1x 1721 Router 1x 836 Router 1x CUCM 7 2x IP Phone 7940 At…
-
SWITCH exam booked
Hi Guys, Just letting you all know that I booked my SWITCH exam for the 27th... On Monday... As we all usually do, this is my post to ask for any last minute tips and advice in order to boost my confidence before I, take the plunge so to speak. Thanks Again, Regards, David
-
MPLS Exam Topics
Hi, I plan to take BGP+MPLS exam soon, I was going through the exam topic section on the learning network website, and what worries me is that for the MPLS exam topics they list only MPLS VPNs material and nothing about TE, AToM VPLS etc. I have pretty much covered the VPN material and according to what I saw there this…
-
Configuring rate limiting on SVI's??
Hello, First let me apologize if I didn't get this in the right category, but I'm only CCENT level and I believe this is more of a CCNP level issue I'm having. Basically, I'm responsible for getting this network up in the next few days for a major project and thus far have had no luck. All of our interfaces are on Vlans…
-
Creating a default route in EIGRP
I'm starting out on my studies for my Route exam and have a question regarding EIGRP default routes. I know there are few different ways to accomplish the task but was wandering what is the 'preferred' way I guess of doing it, or does it just come down to personal preference. For instance using the ip default-network…
-
Taking a stab at CVOICE
Well after technically studying for it for almost 2 years now, taking a CCNA Voice class, a CCIE:voice bootcamp, watching the CoD from INE, and a year or so of increasing hands on with our environment at work, I think I am FINALLY going to take the CVOICE exam :D I think I would like to finish my CCVP by next spring, but…
-
ROUTE has been officially conquered
passed this afternoon and my brain still hurts from it. now that all is said and done i really enjoyed this test and it definitely lived up to the hype. my only real complaints were a couple of the sims were buggy with pings/traceroute and the phrasing in a lot of the questions seemed awkward at best making it difficult to…
-
MPLS Exam Topics
-
802.1x settings
Can some one explan the difference beween these two commands for dot1z please dot1x timeout supp-timeout "The client notifies the switch that it received the EAP-request frame. If the switch does not receive this notification, the switch waits a set period of time, and then retransmits the frame. You may set the amount of…
-
Noob Call Routing question...
I am learning enterprise voice at the moment but had some fun with dial peers and CME configs between different CME routers. In a CCUM environment, how is call handling managed? I have glanced through the chapter, don't have time to read right now, and from what I can tell there are Route Groups and Route Lists to…
-
Internetwork Expert CCNP Series
Hi guys, Has anyone used the Internetwork Expert CCNP class on demand series for ROUTE, SWITCH and TSHOOT? They have 30% off at the moment making it an attractive purchase should the training quality be up to scratch. Thanks.
-
getting to the inside via the out side
OK I know this is not how things should be done, But I would like to know how its possible to set this up. I have a router with two internal networks and an external link to the ISP. On one of the internal networks there is a webserver that has a static nap from the external IP address, So people outside the network get to…
-
Site-to-Site VPN Tunnel
Hi All, I am trying to configure a Site-to-Site VPN tunnel from a Cisco Router > ASA. I have configured the Router as the following and also replicated on the ASA but still can not seem to establish the VPN Tunnel, any ideas or troubleshooting steps/help? ! ! crypto isakmp policy 10 encr 3des authentication pre-share group…
-
Passed the QoS exam
Took the QoS 642-642 today, passed with 857 (passing score was 790). Not the greatest score but I'll take it for sure. IP QoS Fundamentals: 71% IP QoS Components: 86% Modular QoS CLI and Auto-QoS: 100% Classification and Marking: 67% Congestion Management Methods: 25% whatever Congestion Avoidance Methods: 100% Traffic…
-
O'Reilly's BGP book (by Iljitsch Van Beijnum)