-
Is this IOS OK for CCNP?
Hi everyone, I am looking at getting a router with the following IOS: c2600-ik9o3s3-mz.12.3-15.bin I looked it up on the Cisco tool site, and it showed it has these features: 12.3(15) 2620-2621 IP/FW/IDS PLUS IPSEC 3DES BASIC In a nutshell, could anyone tell me if that would be suffeciant for the CCNP? Thanks for any info.…
-
Got the new BSCI and BCMSN books in the mail today..
And very very excited to start reading them! Amazon gave me a better discount than Cisco Press!!! I ended up paying like that.. 72 dollars for both books! Anyway, i just wanted to share my excitement with you gentlemen :)
-
Possible BGP study book
-
Not buying a thing yet, totally confused
I am now totally confused about the CCNP. Apparently, this test change also changes the equipment also. I have read through numerous postings. I have seen the Cisco 3640 router mentioned. I have also seen a post in this forum: http://www.techexams.net/forums/viewtopic.php?t=17815 which "the Shadow" talks about Cisco 1811…
-
MPLS security secnario (off topic)
I've run across an issue pertaining to security on MPLS networks and was wondering if someone would be willing to send me a private message so I could disclose my theoretical scenario. I don't want to publicly post it at this time... It is not based on any exam, nor exactly geared towards study, BUT on the flip side,…
-
MPLS security secnario (off topic)
-
CCNP 642-892
Hi Guys, I am planning to take Routing and Switching composite paper. Can anyone tell me how is the new exam pattern?. Has anyone taken this exam?
-
MPLS Exam
Does anyone know which is the best to use for study for the MPLS exam? I need to do this and BGP to complete the CCIP. The only Cisco book i could find is from 2000 (MPLS and VPN architectures). Surely there is something more recent? Thanks.
-
MPLS Exam
-
Just another lab question
Hi everyone, I hate to ask this same old question, but I have to. I researched quite a bit and could not find anything good for a lab setup. Not that I need a lab right away because I have a lot of reading to do, but it does take time to get the stuff from ebay at a decent price. It could take me 2-3 months. Currently I…
-
MC3810v for CCVP
Johnny5, this was more for you, but for anyone else taking the CCVP not wanting to buy modules and the router to push them (36xx, 2600), I'm sure the 3810 would be enough for 642-642, 642-432, 642-425... I just had to reset it after a firmware upgrade. Not using 12.3 yet though since it would break my home network... Cisco…
-
Flash dead?
Hey guys - I was trying to upgrade the IOS on my 2950, everything was going fine until I got: flashfs[1]: writing to flash handle 0x80BEB4E0, device 0, offset 0x640000, lengh 0x208: Read Verify Failed flashfs[1]: sector ptr: {0x2F, 0x0} flashfs[1]: filesystem marked down. Use "fsck" to recover. %Error writing…
-
where do you find the minimum passing score on cvoice
I can't seem to find anywhere on cisco site what the passing mark is for cvoice. For that matter, I can't find any required passing mark for any exams... can someone provide me with official cisco URL contains those info?
-
Self-Study Guide vs Certification Guide ??
Hello all, Just got my NA and I really want to continue my learning process without any delay and work on the NP. I am a little confused as to the different books out there - the new ones that just came out last month and the ones not coming out till July. What is the difference? Would it be a good idea to just go ahead…
-
Do I need to take the CCNA is get the CCSP?
Hello, I'm taking an internet security class at college and the material is geared towards 2 of the tests you need to take for the CCSP certification. If I pass those 2 tests, the professor will give me an A on the midterm and final. I havn't taken the final yet and I am wondering if that will prevent me from registering…
-
Hello everyone. Starting to prepare for CCNP
Hello everyone, I am starting to gather my thoughts on how is the best way to prepare for the CCNP. The only real thing I noticed, is that you don't really have to take the exams in any particular order. From my research on these boards, it looks like the BSCI is the exam that helps build a good foundation for the other…
-
OK folks - teach me VOICE :)
dear folks, boring with R/S and security this that - now i want to move to something that i've forgotten long ago. does voip still an end to end specific vendor? tell me this : i have 2 3640 routers well connected using hdlc acting as h323 gateway. my client is pc-based phone using netmeeting (pure IP - no analog). why…
-
ASA5505 ??
Anyone have any experience with these for the CCSP exams? They run 7.0 correct? I can buy one new for $1k CAD so I am looking at it for home right now but may be interesting for future security studies.
-
Equipment for new BSCI exam
Hi All Recently passed the BCMSN exam in December, and am now looking at taking the new Routing exam. Luckily, at work, we have shed loads of 2620 routers (about 10 going spare). I've included a link regarding what's on the new exam below http://www.cisco.com/web/learning/le3/current_exams/642-901.html I was thinking of…
-
MPLS Help
This caught my eye in the Wiki page for MPLS; "MPLS relies on IGP routing protocols to construct its label forwarding table, and the scope of any IGP is usually restricted to a single carrier for stability and policy reasons. As there is still no standard for carrier-carrier MPLS it is not possible to have the same MPLS…
-
Passed QoS with 964
W00t! now on to Gateway/Gatekeeper. I used Knowledgenet CBTs and CBT Nuggets to study for QoS 642-642. Thanks to everyone in this forum for your help and support. - Dapunnisher
-
VPN Config
Hi guys, We have a watchguard firebox running at our HQ and a remote user with a Cisco 827 and I want to set up a static VPN tunnel between the two. The watchguard config is good but I would just like some help with the cisco config. This is what I have so far: crypto isakmp policy 15 encryption 3des authentication…
-
CCSP gear
guys, I'm trying to put together a CCSP lab. I currently have: 3640 12.4 IOS firewall PIX515 v. 7.1 Cat 2950 3x 2612 what should I get next...IDS or concentrator appliance? tx opers13
-
GLBP
Hello Friends I want to configure GLBP in my company and i have to configure. i am looking for proper document and sim if possible. document for information and sim for pratc. so pls provide me some information. Thanks
-
CCNP Books and general questions
I'm going to try and get my NET+ real fast in the next few weeks (hopefully it isn't too hard, a friend of mine told me to just take it and not even study since I passed my CCNA), so I need to get my CCNP books pretty soon. Have the new CCNP books from CiscoPress been released yet? If not, when will they be? Is it 100%…
-
Total Bandwidth per call
Hello, I was monitoring a conference call (total of 3 phones) and was trying to figure out how much consumption it used on our bandwidth. Question - isn't the bandwidth consumption per caller for a G.711 75 - 85K per caller per phone? Wouldn't that be a total consumption of 250K? I was monitoring it and it showed a peak…
-
Interesting link
Hi, It’s been a while since a last posted a message here (almost 3 years ago). My CCNA is going to expire and so I’m preparing for my CCNP. I’m not sure yet which one I’m going to take first (BCMSN or BSCI). While looking for some course materials (Cisco press books not yet available in Belgium), I found an interesting…
-
cvoice exam
did anybody take cvoice in year 2006? Can someone share experince in cvoice exam? I am preparing to take the exam but bit worried since I wont have any exposure to call manager till next year jan(when I will be attending minicamp for call manager)
-
CCNP, CCVP, CCSP, CCIP?
Can anyone give me a broad description of what each one is about, what they involve you to know, and what you should basically know after getting the cert? Thanks.
-
New CCNP self-study materials
Hello all, I've been somewhat busy with non-cert related stuff, so I haven't really been here in a while. I'm starting to gear up for a CCNP run. I was wondering if anyone knows when the new self-study materials are going to be released? Hopefully it's soon, because I feel like I'm getting to the point where I'll be ready…
-
Cisco ACS - proliant server??
guys, I was in a data center this week and I saw 2 "cisco appoved" acs servers/unix. Cisco re-badged them so there wasn't a model number..... It looked like an HP proliant DL-360?? anyone know for sure? opers13
-
CCVP - Call Manager Tutor Wanted
If there is someone out there who is very experienced in deploying Call Manager / Enterprise Cisco VoIP solutions who is looking to make a little side money, please contact me. Specifically, what I'm seeking is someone who has access to a production (or very big lab) Call Manager, including integration with Gateways etc. I…
-
Who is currently seeking their CCIP?
-
EIGRP Algorithm
Dear Friends I wish u r all in very good health.i have 2 questions concerning EIGRP. First: Does an EIGRP router includes a list of all routes advertised by neighbors or includes only successors routes and routes from neighbors who achieve the fesabile condition. Second: Is it true that FD changes only during an…
-
Which is the Easiest CCNP Exam?
Hello all just joined today, so thanks in advance for any help & advice that may come my way. I need to recert my CCNP this summer & I know I can do this by passing any of the 642 exams. Which one of the 642 CCNP exams is considered the easiest?
-
How long do you give yourself to study?
I was wondering how long everyone gives themselves to study for an upcoming exam. I'm thinking of booking my exams in 6-8 week intervals when I begin my trek for the CCNP. Does that sound reasonable?
-
ccnp 642.901 exam
can someone direct me somwhere i can find some free training materials notes resources etc for 642.901 thanks in advance for your help
-
Static (inside,dmz) same ip addresses for both of them
While i was googling I found the link below : http://www.ingate.com/files/Engineering_Note_Ingate_SIParator_with_Cisco_Pix_en-A.pdf What got me confused is this quote from the link above Why are the ip addresses same ?
-
Help me out for CCNP BCMSN 642-812
Hi all, I had written CCNP-BSCI-642-801 old papaer. I have planned to write CCNP-BCMSN new paper by January end. Can anyone Help me out, about the exam toughness. and suitable material for it. I will be thankful to you. Prithiviraj.
-
ONT exam
Has anyone tried the ONT exam yet? Just curious what to expect outside of what is listed on the blueprint at Cisco. I have the student guide for the course to study from, but any other recommendations are appreciated.
-
Which CCSP to do first
Hi I have just completed ccna and just wanted to know whether the sequence of the ccsp courses matter. I was think to doing the pix exam first. Please let me know what you think. many thank
-
CCNP!! I finally made it!!
Hey everybody - I passed the last exam on Wednesday (CIT) and it's now official. CCNP! I'm so thankful that it's finally over! One question: : On the certificate status, the shipping options has an upgrade link - and it takes me to a https:// website to pay for my certficate. Is this just an option to get my certificate…
-
RIP version 2 (Next-hop)
Dear Friends How r u all ?? I wish u r all in very good health.I wish u could help me undestanding something in RIP V2. In RIP V2, New field introduced which is "next-hop address" . i notice that this field is always set to 0.0.0.0 . i tried to undestand it from many sources but couldn't understands it well. can anyone…
-
642-551 Part...well 4? 5? this week
Nothing really new to add. Sat it this afternoon, the only device exam I haven't done yet is the IPS so it was as easy as everyone says. Studywise I used Network Security Fundamentals, the Cisco CCSP Reference Guide and Flash Cards, a quick skim over Network Security architectures, Johan's notes here and another skim over…
-
Passed BSCI 642-801
Passed today with 912/1000. Focus was mainly IS-IS, EIGRP and IPv6. Which I could not really understand. Test was pretty easy, I had 10 questions left with 45mins on the clock and took my time. I finished about 25mins early. If I was to say which test was harder....I would say BCMSN, although I found that there was alot…
-
Passed MPLS
Got 926, that completes my CCIP thank God! No more exams for me for a while, i'm just going to revise and do more lab work on ccnp/ccip material.The exam was tough but not as tough as the bgp.I did face the most difficult sim to date,lots to do without a complete topology view.15 questions down i already had 1 sim and 2…
-
Passed BSCI today!
Yay! Did the 642-811 BSCI earlier today and passed with a score of 803. Kinda disappointed, should've read up more on some IS-IS and EIGRP, but hey.. passed is passed :) I mainly used the Netacad study material, Crammaster and Dynamips (gotta love dynamips!). Going for BCMSN after new years, probably gonna return with some…
-
I just got CCNA, now facing CCNP.
Hello everybody, This is my first post, I would like to thanks TechExams because it has been very helpful. I got my CCNA thanks to a book, notes from the internet, some labs have paid in a Uni, two 2500 routers, Boson simulator. But I think CCNP (BSCI, BCMSN, ISCW and ONT) is going to be different. Are the 4 exams test and…
-
simulators?
I don't suppose there are any available for the CCVP curriculum?
-
CIT - took it this morning
I passed the CIT today to complete my CCNP. It had to be one of the easier exams of the 4, i guess both based on the fact that I work with some of the things and the fact that it builds on the other exams i have taken. It took me 5 months to get it complete, but I did it! Now, i will study for CCVP although my main focus…
-
BCRAN cancelled...
Oh well. I had to cancel my BCRAN exam today, Basically I just wasn't ready for the exam. I haven't had much time to study lately and my heart wasn't 100% in it. I am pretty pissed off but I guess it's on to the new BCMSN and then ISCW. I might do an MCSE 2003 whilst I wait for new study material?
-
CIT in 12 Hours
Ok I have CIT in 12 hours, I hope I do well, good wishes?
-
Done with SND
passed today.. this seemed to be a throw away cert if you ask me.. very basic stuff majority covered in NP and all else missing you can read the technotes, cbt nuggets( which covers it great) and practice tests.
-
Cisco SND 642-551 done
Just got back from the testing center and finally I am only one exam away from being able to call myself Cisco Certified Security Professional. Talk about an easy exam.....wow. I assume that Cisco retires that exam on 12/31/06 because its way too easy. To study for the exam I have used the Cisco Press IPS Self Study Guide,…
-
CCNP Academy Material or the Self Study Cisco Press?
Hey Guys, I am currently working on the BSCI, and noticed the CCNP Academy material. I dont know why I didnt think about that material before, since I went through the CCNA Academy. Currently I am using the 642-801 Self Study book. I built the lab the book talks about in the BSCI second edition and have just been taking…
-
A tad insane?
I don't know what the hell I am thinking the past few days, but I have decided that it would be cool to finish my CCNP by the end of the year. I know I should have thought about that a month ago Anyways I have booked my BSCI on the 22nd, BCRAN for the 28th and CIT for the 31st. If I fail, I could careless. I was planning…
-
Anyone taken the ISCW?
Or any of the 4 new tests for that matter? I just passed the BSCI 801 last Friday and am getting ready to roll up the old sleeves for the ISCW. I'm just curious how different the tests are. Are the lab sims more difficult? Is the adaptive intelligence better (or worse depending on your point of view)? I like that Cisco is…
-
Cleared SND
Just got back from testing center passing score - 825 your score - 953 Describe the products in the Cisco Security portfolio.... - 81% Describe the security features available for a cisco layer 2 device - 100% Implement security on a cisco IOS router - 100% Describe and configure Cisco IPS and HIPS - 100% Configure and…
-
3550 vs 3560 trunking default
Just FYI for everyone, 3550 default to "dynamic desirable" 3560 default to "dynamic auto" I know it's simple, but took me a few minutes to figure out what was going on in a recent lab, because I figured the 60's had the same default as the 50's. It's the simple things...
-
: ping , access-list permit ip any any
Does "access-list permit ip any any" permit ping ? or I have to issue : "ping icmp any any" ? Because as far as I remember (right now I do not any router handy) when i had configured a router long time ago, I used to use: permit ip any any Any comment will be appreciated.
-
How much harder is the CCNP than the CCNA?
Probably a lame question to ask but...I think i'll get some interesting responses....i hope...lol....So those who have ccnp cert or are preparing for it: How much harder is the ccnp than the ccna? I know its alot harder but as far as knowledge scope and understanding....with ccna knowledge it shud be fairly ok....shud it??
-
CIT in the morning...
CIT in the morning. I'm pretty sure I'm ready. Been going over all my debugs and shows. I just want this done, so I'm done with my CCNP. Just a touch burned out at the moment. Anyway, if anyone has any last minute things I should think about, feel free to let me know!
-
Passed BCMSN!
Hi All Passed the BCMSN about an hour ago...got about 840 odd. :D *many* thanks to everyone on this forum who helped me with questions and explained topics out to me....cheers! (as we say in the UK)
-
642-551
passed this today, easiest Cisco exam yet, I used CBT nuggets and the Doccd as my sources. Some very very basic questions, so I know now why 551 is being replaced with 552, my advice is if your studying CCSP get this one done before 31st Decmeber, Only annoying this was a sim which didnt say which version it was running…
-
Bandwidth utlization
Hi everyone We're having trouble with certain people on the network running bandwidth intensive applications (or having viruses on their pcs) and as a result bringing a whole network to a complete standstill at times. I wanted to know the command used to display the bandwidth utilized by every ip on the network. I've seen…
-
Passed BGP
Got 912, lots of pictures,not enough time as usual.3 sims and not easy one's either,so that was a change.I couldnt finish the last sim,got most of it but didnt know how to finish the last little bit,strange. I used Cisco's rel3.1 training notes,and doyle version 2, they didnt cover everything as about 3 questions i didnt…
-
New Updates to CCVP
For those you not on the Cisco Mailing List.... the CCVP is changing! The CCVP is Changing! CCVP Blueprint Last day for the Current GWGK exam April 26 2007. New Updates to CCVP The CCVP certification curriculum has been revised to ensure network professional have the most current training available and the skills necessary…
-
642-511 CSVPN
Finally got to sit this one today (after putting it off a week and then having the exam center close on friday. It's number 3 for me in the CCSP track, SNRS and PIX being the 2 previous. Overall I didn't think the course was too hard but the exam was 'tricky'. It seemed to rely a lot more on vaguery and confusing wording…
-
CCNP home lab setup requirments
Hello all need some advice on setting up a home lab ccnp style. How much kit do i need for the whole CCNP exam set ? Ive got 3 2610's already but a colleague reckons i need heaps more !!!! Any help much appreciated Sean
-
EIGRP Understanding...
Just FYI for all those who have issues understanding all the concepts behind EIGRP's DUAL...Internetwork Experts Class on Demand has the best detailed explanation of the process I've ever read/watched.
-
debug codes
hi all I need a link or something to understand the debug codes for ISDN and PPP? e.g. User TX -> RR sapi=0 tei=76 nr=108 or INFO sapi=0 tei=76, ns=71 nr=107 or CCBRI_Go: NO CCB Src->HOST call id 0x8075, Is there a book or something on debug codes? Thanks in advanced.
-
Whats easier - bcran or bcmsn
can any one tell me which is commonly known to be the easiest of the 2 need to do this within 2 weeks starting from 2day so need to choose the easiest thanks
-
Pix 515e VPN Config Question
ok well im a noob when it comes to 515e PIX. Let me tell you how my current setup is. Pix is doing dhcp (10.25.19.x network). My vpn pool is 172.16.38.100 /27. I can get connected to the VPN using ipsec, and i get a valid ip, but i cannot access/ping any hosts on the 10.25.19.x subnet. heres my config. I have the debugs if…
-
Is there an ATM simulator?
Just out of curiosity, is there a simulator out there that lets one test ATM in a virtual lab?
-
Cisco VPN or wireless question.
Anyone had a problem connecting to their company VPN with Cisco VPN client over hotspots (airport, hotel, etc)? Unfortunately, I can't look at the problem laptop right now, just wondering if there's any one who's already run into this. Keatron
-
redistributing isis into eigrp question
i have had several opinions on how to configure the following--- QUESTION 1 if i am asked to configure isis into eigrp with the following info bandwidth 256bkps delay 100 reliabilty 255 load 1 mtu 1500 is it done like this? redistribute isis level-1 metric 256 100 255 1 1500 THE BIT IM CONFUSED ABOUT IS WHAT TO PUT FOR THE…
-
Anyone got the Cisco Systems magnet?
Today we got a 2940 in and it comes with a giant cisco magnet. It's sweet!!! I put it on my fridge....."Powered by Cisco" baby!!!!!!
-
New CCNP exams
Hey gang - I'm looking to start the CCNP sometime in 2007, but I'm trying to prepare (ie home lab) ahead of time and was wondering what will be needed for the new exams? At work we're constantly getting rid of old equipment and I would hate to pass something up that would be useful. So far my lab consists of: (2) 2507 (2)…
-
Real World Problem: Wierd ICMP
Using a PIX 515, 6.3(5) feeding to a Syslog server. In the last 2 days I started seeing the following: "......305005: No Translation group found for ICP src inside: 12.x.x.166 dst outside 12.x.x.165 (type 11, code 0) I've done some googling around and this is usually due to no translation existing for the addresses (duh).…
-
VPN studies
Does anyone else have a hard time grasping VPN concepts? They are so complex it's actually horrible, BGP wasn't this hard. I mean what's with all the AH, ESP, IKE etc. all about? Venting - day off, been studying for a while
-
Layer 3 Switching/ CEF confusion
Hi All Question to those taking or have done the BCMSN, or who have access to a 3550 EMI switch. I'm looking at Multilayer switching, particularly the CEF variety and am confused. The Sybex book I am using says that to CEF is the L3 switching method on 3550 switches, and to enable it you use; conf t ip routing ip cef You…
-
PIX Problems, cant ping gateway
im having some problems with my PIX 506. Config is as shown below: PIX Version 6.0(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password Nw8MznM5H/gvNcd3 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname bevpix fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720…
-
Passed IPS.
I passed my IPS exam today. Two months of studying & i squeezed out a 930 over all. Now i need 1 more to go ( HIPS ) and then i can get back on the CCIE horse.
-
Tell me why this fails....
Here is something for anyone who has passed BCMSN to figure out. Two switches, multiple vlans running HSRP. Each vlan configured with its own subnet and standby group 0. configuration on each 3550 looks like the this SW01: vlan 10 ip add 172.16.1.2 standby ip 172.16.1.1 standby preempt standby authentication xxx standby…
-
QOS 642-642 Exam - Update PASSED
Well Ive been down a dark hole studying the last few weeks, I got the exam booked for Friday, any last minute tips ? I hope I get this one first time, as I could sell the books as an alternative to a sleeping pill! I couldnt face a reread!
-
Default Spanning Tree version on Catalyst IOS switches
Hi All I've been searching the Cisco site for a definative answer as to what the default STP method is on IOS switches such as the 2950 and 3550. Some people say it's PVST+, others CST. Does anyone know, or better still, have a link to where this is answered? Thanks
-
Router question
Hi A scenario question... An HQ exists with 10 branch offices. HQ contains around 100 people, branch offices about 30-50 people. The branch offices are connected to HQ via a leased line connection using a Cisco 2600 series router. The entire network layout is a hub and spoke, with HQ having a leased line connection to all…
-
Layer 4 switches
Hi All Some switches, apparently, are capable of Layer 4 functionality, and I'm not too sure what this means? Does this mean the ability to filter packets by port number/ application, as in an extended access-list? Thanks
-
BCRAN tomorrow
Ok, my BCRAN is tomorrow. I think I'm ready. I want it done so I can finish with the CIT in December, then relax for a month or so. So did I read right that modems aren't on the exam? While I know them pretty well, if I can cut that knowledge out for the test, it's helpful.
-
Cisco Pix question
Well now that im done with NP i decided i want to go security route, and im gonna invest in some cisco pix. I have the chance to get a couple of 506e pix (vpn-aes enabled..vac+) for a reasonable price, but i know these wont run os 7.x. So my question is, is this even worth it ?? I plan on starting ccsp, but just a little…
-
3550 in BSCI?
Hi there... A question for anyone who's taken the BSCI...is there any L3 switching involved (e.g. using a 3550)? I'm considering purchasing a 3550... Thx
-
Passed CIT
Passed CIT today, 835/804. A little closer than I would like, but it's a pass. Make sure you know debug output well! Peter
-
IPTX training material
Hi guys, I was about to pursue my CCVP when my company asked me to study for my IPTX CCM express cert. What kind of traning material should I study for this test? I have the majority of the CCVP books, I just need to get certified by January. Regards
-
Cit in 2 Hours
Well its been a long journey, and finally i have cit during my lunch hour (lol), and i will finally be CCNP. Whats the average age of CCNP's ? Just wanted to see if im behind or what not. Wish me luck.. hopefully sim is easy. lol Peace
-
dynamips
I currently have a 4 router setup, using a 12.4 IOS image for these 7200's. I am not doing anything special, but when I have all 4 routers running it takes up 100% CPU and is slow as sh*t. I have a decent PC AMD 64 3700+ with 2GB ram, so I dont think that is the problem. Does everyone elses run this slow? I am not sure if…
-
Cisco ATA 186..
hi ppl, not that i am going to do my CCVP but i think this is the best location to place my query! So, I was given a Cisco ATA 186, http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_data_sheet09186a008007cd72.html I know what it does etc, but i was wondering if there is someone who ever used it? Also can I…
-
Passed MPLS
-
ISDN Haters...
It seems everyone these days hates ISDN! WHY?? I like learning about it, it's not that hard. I always found WAN technologies easy to grasp even from when I started the CCNA. Here's a nice ISDN tutorial There are some Docs on ISDN zone about isdn products they offer and their take on it :D I would also recommend the…
-
Passed BSCI last November 9 2006
I passed last 9th of november 2006 with a score of 875 not bad. I used Cisco Press, Sybex 5th edition, CBT nuggets, Dyanmips and real Cisco Routers, Boson Netsim. After the exam I just enjoy the night and celebrate, the next day I start reading about BCMSN. Is this exam difficult, I can say that BSCI is easy than this…
-
BCRAN
Hi, I am new to these forums. I passed my BSCI and BCMSN a few months ago and am powering on to finish the BCRAN and CIT before the end of the year. Basically, I am after some info on the BCRAN exam. I have read a few of your posts which have been quite helpful. There seems to be a lot on FR and ISDN backup. I know my ISDN…