-
JNCIP-SP books
I have the Sybex book series for the older JNCIX-M exams JUNOS cookbook, and Junos Enterprise Routing. I mostly still have to read Junos Enterprise Routing cover to cover but before I take the plunge I was wondering if there is any other newer books I should consider for JNCIP-SP as most of my library is now 10 years old…
-
certificate is in inactive state
Hi, Myjncis-er is in inactive state, can i take JNCIP-ENT? and also my JNCIA-M/T is in inactive state, can i take JNCIS-SP exam? Please let me know. Thanks, Mumrao
-
Olive up and running :)
Finaly after a few days playing I have Olive running inside of GNS three and able to see other devices :) So this is the start of some juniper certs I hope. I have to say first impressions are not brilliant (has only been about a hour or two of hands on with JunOS), coming from Cisco it all seems a lot of faffing around in…
-
Netscreen traffic management
Hi guys, I've inherited a site with a Netscreen SG520, with a 20Mb Internet circuit. No bandwidth is set on the interfaces, nor is there any traffic management in place - pretty much a vanilla config allowing all outbound. Problem is any big downloads are saturating the entire pipe - I'm pretty new to Juniper kit, is there…
-
My Certification Journey EMEA blog
I just stumbled upon the Juniper Blogs page and notice the My Certification Journey EMEA blog, where people are posting about their Juniper certification experiences. It's a small blog, but there are recent posts. I thought is might be interesting to others doing the same.
-
specifying family under firewall configuration
What is the idea of specifying family under firewall configuration? For example one could configure "firewall family inet filter": firewall { family { inet { filter TEST-FILTER { term TEST-TERM { from { source-address { 10.10.10.0/24 except; 0.0.0.0/0; } destination-address { 10.10.10.22/32; 10.10.10.77/32; } } then {…
-
How to make MAC-move limiting in MX480 ?
Hi All, Just want to know if any people here know how to configure mac-move limit on MX480 box. I already search on KB but not found. I juts found in EX only. In MX just show to notify the mac-move not to prevent or limit it. Hope someone here can help me...Thanks
-
diff between "show configuration | compare rollback" and "show system rollback"
Am I correct that only difference between "show configuration | compare rollback" and "show system rollback" is that latter supports comparing between previously committed versions? Any other differences?
-
Juniper VPN CLient issues (MTU change?)
Hi all, recently our users are experiencing random RDP session drops when they are connected to the Juniper VPN client (the appliance is a few states away and not controlled by us). However, the client remains connected to the VPN appliance. I've done pings and tracerts and established that I'm getting extremely high…
-
Juniper MVRP issue on EX4200 switch with SFP ports
For the experts in the house, I don't know if anyone has had experience with MVRP in juniper switches which is similar to VTP in cisco switches. I have configured all parameters based on my knowledge and somehow the switches are not sharing vlan information but they are sending mrpdu.
-
JNCIE-SEC case studies
Hi, Does anyone have JNCIE-SEC case studies, who can share would be great? Thanks, Uma
-
JNCIE-SEC group study
Hi, Looking for people who are preparing for JNCIE-SEC. would like to do group study. Please let me know. Thanks, Mum
-
"syntax error" while configuring router with "load replace terminal"
Rather often when I copy load of configuration to a router using the load replace terminal I receive syntax error despite the fact that configuration itself is correct. For example: root@M10i# load replace terminal [Type ^D at a new line to end input]interfaces { ge-0/0/0 { replace: unit 96 { apply-groups TEST; vlan-id 96;…
-
Juniper JNCIE-SEC
I usually don't like to post things like this... but I'm too crazy happy and excited right now. It's been a tremendously long month of worrying and fretting and waiting for the results... but I woke up to the happy email saying I can add the JNCIE-SEC to my collection. And as an added bonus, for the third time, I think I…
-
passed JNCIA-Junos!
just back from Prometric having passed JNCIA-Junos :D did most of my study from the FastTrack books, but dipped into the M-track books & Juni docs for clarification on a few things (plus asking the odd stupid question on here) I think I'm going to do JNCIS-ENT next to make use of the free study resources & to solidify my…
-
any one intrested in joining a study group for JNCIE-SP LAB exam
all,looking for interested folks to join JNCIE-SP Lab exam prep.
-
policy-statement logic - help!!
I suspect I am being thick here, but I'm really struggling with how the logic of policies works I have a very simple setup of 4 routers in the lab like this: --- ---- ---- --- |AS1|--ebgp--|AS10|--ibgp--|AS10|--ebgp--|AS2| --- ---- ---- --- I have static null routes on the AS10 routers which I want to export to egbp & ibgp…
-
Any One Clear JNCIA-FWV exam recently.
Hi All , Anyone Cleared JNCIA-FWV exam recently.please share your experience. Thanks Suri
-
JNCIA JunOs and JNCIS:SEC
What would you guys suggest (lab hardware wise) for these two exams? Do you think that an olive or something running in GNS3 would be enough to get through these exams?
-
view BGP memory consumption
How much memory does BGP take? I can view amount of prefixes using the "show route summary" and as I understand, Routing Protocol Process (rpd) should indicate this in some extent(show task memory detail), but doesn't rpd contain memory consumption of all dynamic routing protocols?
-
Can the SRX failover with rate ?
Hi All, My customer has a requirement about SRX failover,that's failover with rate. That mean if the SRX cluster CAN NOT process the traffic of 10G(maybe lower) in the reth interface or security zone then failover to other devices. Can SRX do this and how to do this? Thanks
-
Confound with the dynamic-attack-group's category concept
Hi,all, These output are all from JUNOS SECURITY, {primary:node0}[edit security idp dynamic-attack-group Malicious-Activity] root@SRX5800-1# set category values [ SHELLCODE VIRUS WORMS SPYWARE TROJAN ] PAGE 441 [edit security idp dynamic-attack-group Protect-Clients] root@SRX5800# set filters category values [ HTTP SSL FTP…
-
Passed JNCIS-SEC
Passed JNCIS-SEC this afternoon. I only lost marks on UTM stuff (which I don't use at work anyway) so I was pretty happy The exam was considerably harder than the JNCIA-Junos exam imo but very fair - i.e. there was no stupid word-game questions - either you knew the answer or you didn't. I used the official course…
-
J2320 can not boot, can't load kernel
Hi Guys, I was trying password recovery on Juniper J2320 router, during that time I hit error as follows. Trying to boot from Primary Compact Flash (recovery partition) ... Trying to boot from Primary Compact Flash ... Console s: internal video/keyboard serial port BIOS drive C: is disk0 BIOS 639kB/523072kB available…
-
Juniper SRX100 with Cisco 2960G
Hi Guys, I am connecting 2 Juniper SRX100 with Cisco 2960G with straight through cable SRX100 ge-0/0/0 (vlan 10)(ip 1.1.1.1/24)(vlan 10)cisco 2960G gig 0/9 | cisco 2960G gig 0/10 (vlan10)SRX100 ge-0/0/0 (vlan 10) (ip 1.1.1.2/24) I checked mac address table on cisco 2960G, both SRX are showing up there. But when I try to…
-
Home setup question with 5GT
I recently got a netscreen 5GT that I want to incorporate into a home office, have a quick question on how the topology should be setup. The office has time warner cable internet connection coming to an Arris cable modem box, from there a linksys router/WAP with the hosts connected. I want to continue to have the linksys…
-
hierarchy of apply-groups
I made a following configuration to my router: root> show configuration ## Last commit: 2011-09-24 02:23:18 UTC by rootversion 10.1R1.8;groups { TEST2 { interfaces { <*> { unit <*> { description switch; } } } } MASTER { interfaces { fxp2 { unit 0 { apply-groups TEST2; } } } } MASTER2 { interfaces { fxp2 { unit 0 {…
-
Juniper Secure Appliance Home Lab
Hello everyone I am new to the forum and also new to Juniper so I am hoping to ask for a little advice. I am a junior network/firewall admin looking working towards becoming more advanced in various technologies and working towards some qualifications. At work they have recently brought in a Juniper SA for SSL VPN.…
-
Vmware Olive serial question?
All, I built out my first Olive in vmware today, just for fun. Then the instructions say to map it to your serial port... Is there a way to emulate a serial port to I can just putty locally? Or am i out of luck? I really want to avoid buying a pile of PCs.
-
Passed JNCIP-SP
Passed the JNCIP-SP today. I actually found this exam easier than the JNCIS-SP. I ordered the official courseware for the MPLS VPN's, Multicast, and CoS classes through my company and I attended the AJSPR class. Obviously working with the stuff on the job helped as well. Lots of BGP, L3VPN, L2VPN, ISIS, and OSPF.…
-
JNCIE-SP - study group
Hi, Looking for folks who are planning for JNCIE-SP exam within few months. My skype: tomala362 Cheers, T
-
JNCIE-SP in Sep/Oct 2011
Hi, I'm in the process of preparation to the JNCIE-SP lab and looking for someone who is seriously going to attend the lab this autumn to prepare together. The idea is to constantly share sample configs, case studies, tricks, etc. when working on exam. This is all about knowledge sharing on really high technical level, so…
-
SRX HA cluster to EX VC question
Evening Juniper experts! We have a client who has a requirement for a Juniper SRX HA cluster which is going to a pair of EX switches (can't remember the model number but it's a copper model with four 10GbE SFPs). I'm not in hte office until next week so I can't actually do any of the config but I'm wondering how I set up…
-
Passed the JN0-101 (JNCIA-Junos)
Hi guys, I took the JN0-101 this morning and passed with a 90%. A passing score is 66%. I used O'Reilly's Junos Enterprise Switching book for a majority of my studies and watch some CBT Nuggets (but the instructor seemed to fumble his way through the lectures). I also have about 1-1/2 years working on Juniper EX switches…
-
in which case route-policies use AND or OR logic?
Am I correct, that route policies use OR logic if the "from" statement is the same(for example only "from route-filter") and use AND logic if different from statements are present(for example "from route-filter" and "from community")? In other words, in this case: set groups TEST policy-options policy-statement TEST1 term…
-
understanding routing table "Bit" field
In "show bgp neighbor" output there is a following informational line: "Table inet.0 Bit: 10000". For some other BGP neighbors the "Bit:" field has the same value, for some others, it's 10001, 10004, 20000. According to documentation "Bit:" filed represents the entry in the routing table for this peer. How to understand…
-
understanding port numbers in "show bgp neighbor" output
In case I execute show bgp neighbor 10.10.10.1, I see following output:"Peer: 10.10.10.1+8132 AS 64001 Local: 10.11.11.1+179 AS 64002" As I understand, 8132 and 179 are TCP port numbers. Shouldn't the port numbers be opposite? I mean shouldn't the peer TCP port be 179 and my local IP(10.11.11.1) should use port number from…
-
ldp-tunneling with hidden route in table inet.3
Hi mates, im experiencing an issue regarding ldp-tunneling. The question is why some hidden routes will be generated within inet.3 routing table when ldp-tunneling is cofigurated within the LSP. When I deactive the ldp-tunneling, the hidden routes within inet.3 are gone. could any experts bring me some light on this?…
-
"show route receive-protocol bgp" vs "show route protocol bgp"
Am I correct, that in case I do "show route receive-protocol bgp 10.10.10.1 table inet.0 detail", then I see routes announced by 10.10.10.1 just as they were announced? I mean none of my routing policies have changed anything(for example modified communities) about those prefixes? And in case I would like to see those…
-
Where to config "OSPF IGP shortcuts" & "traffic engineering shortcuts"?
Hi Mate, I encountered an issue regarding shortcuts when I read the Junos config guide in the following link: http://www.juniper.net/techpubs/software/junos/junos94/swconfig-routing/configuring-ospf-igp-shortcu... It mentioned that in the "NOTE" section: ============================== Note: Whenever possible, use OSPF IGP…
-
JNCIP-SEC Preparation Group
Hello all, I am preparing for JNCIP SECURITY exam in the end of 2010. please confirm, If any one interested to join me for this preparation. I am interested to make a group of engineers for this preparation. Regards
-
Packet Pushers podcasts on Juniper certifications
The Packet Pushers podcast has a very recent episode on the current state of Juniper certifications: Show 74 – Juniper Certification Track Update And one from a year ago: Runt Packet No. 7 – Big Things Ahead For Juniper Certifications
-
Multicast Routing Protocols in Olive
Hi Guys, Can anybody let me know for which JUNOS version Multicast routing protocols are working in olive. I have JUNOS Olive 10.4 but when i configure OSPF it is working fine. Then I configured DVMRP and even OSPF neighborship is not there. Thanks
-
Question regarding firewall filters
on a cisco router this is how the rule is written access-list 101 permit tcp any host 10.10.10.1 eq 80 access-list 101 permit tcp any host 10.10.10.2 eq 443 access-list 101 permit tcp any host 10.10.10.3 eq 3389 on a Juniper box set firewall filter INBOUND term services from source-address 0.0.0.0/0 set firewall filter…
-
Layer 3 VPN JUNOS
I have two Juniper M7i routers running 10.4R1.9 and I am trying to setup a VPN tunnel between the two. When I show services ipsec-vpn ipsec security associations no SA information is available. I've posted the configs below. Please give suggestions. Note: I was configuring over an old config, so disregard some of the…
-
Juniper Certified Network Engineer Job New York
Looking for Juniper Certified Network Engineer in New York City. The Candidate needs to have hands on experience with Juniper M & T series routers. Knowledge of Metro Ethernet, MPLS, JUNOS. Contact Syed Aijaz( aijaz@externetworks.com )
-
RR and L3 VPNs
hi all- trying to figure out what are some of the ways to get vpn to work when only peering with RR. 1. setup LSP from RR to PE 2. add a route in inet.3 (found this on a website) routing-options { rib inet.3 { static { route 0.0.0.0/0 discard; } } } is there another way? thanks
-
jncia-fwv
Work put me through a class last week that corresponds to the JNCIA-FWV exam. Decided to sit the exam on Saturday since everything was fresh in my head and passed with a 95%! First Juniper exam of my career and I will be taking the JNCIA-SSL exam soon as well since I am sitting that class yoday and tomorrow.
-
JNCIS-Sec Done
A little further along the path now :) . Overall I think the Fast Track materials (esp. now with the added UTM section) covers this pretty well but I was also working from the O'Reilly JunOS Security book and had done the P level AJSEC course a month back. I was actually a little worried going into this one as the material…
-
PVLAN Confusion
I'm doing some labs with PVLAN, and I've stumbled on configuring the isolated VLAN. So, here is what I understand about the configuration: 1. I create a primary VLAN and use 'no-local-switching' option to indicate it's a primary VLAN, but what does the option do? The documentation didn't tell me anything about that. 2. I…
-
Need Juniper simulator for passing JNCIA exam
Hi dear people . I need a router simulator Juniper routers for passing JNCIA exam . I've downloaded a simulator from http://www.certexams.com/ but it is not complete! because it need a serial and I can't find anything for provide as a serial . can anyone give me a link for a good juniper simulator with it's crack and…
-
lt interface vs fe-0/0/x
Hello, I have an M7i in the lab to play with... While starting creating topologies I saw i have 2 ways of configuring them. One is via the tunnel pic, while the other is interconnecting all 4x fast ethernet ports via a a switch With which option I can cover the majority of the jncie scenarios ? (specially qos, vpls, l2vpn,…
-
right order of juniper exams
Hi all this is my first topic, and i hope i have not "broken" any rules. Im interested to get these certifications, but i need some aids. Im looking for the right order of the exams, in a clear ladder. I read i must start with JN0-101 Exam and the 2 pdfs provided opn fasttrack + 5 hours netowrking fundamentals tutorial are…
-
JNCIA vs JNCIS
Hey guys, I've accepted a new position and part of my new job will be support of secure remote access. Juniper is about to become an important part of my life. I don't have the luxury of pursuing any Juniper certs right now (maybe I'll get started on that in a year or so), but I was wondering what the difference is between…
-
BGP setup between Cisco and Juniper
I made a following setup: While be BGP session itself is up: root@M10i> show bgp summary Groups: 1 Peers: 1 Down peers: 0Table Tot Paths Act Paths Suppressed History Damp State Pendinginet.0 0 0 0 0 0 0Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...10.10.10.121 64562 253 290 0 2…
-
disable ICMP on M10i platform
sI tried to disable ICMP on Juniper M10i platform for testing purposes. At first I applied group firewall:router-protect to lo0 interface. Inside the firewall:router-protect group I defined router-protect filter, which disables ICMP protocol. However, for some reason, I'm still able to ping: root@M10i_lab> show…
-
JUNOS ping utility and fragmented ICMP "echo request" probes
Let's say I have a following setup: Both Gi0 and ae0.199 have MTU 1500 bytes. Cisco 891 has 10.10.10.2 configured to it's Gi0 and M10i has 10.10.10.1 on it's ae0.199. If I execute "ping 10.10.10.2 size 1473 count 1"(or larger packet size) in M10i and tcpdump traffic, I can see following: 00:14:51.326107 Out…
-
SSG20 and Sipgate
Hi Guys, Has anyone ever tried setting up sipgate via ssg20 using a Cisco phone? I'm having problems with one way audio. It's working in the outbound direction via firewall but not coming back. I've tried different setups forwarding ports using VIPs (5060, 3478, 5004, 10000) also tried without this configuration by…
-
Some general questions about contents of JNCIA
Hi all, I've recently started my studies on Juniper devices (I usually work on Cisco stuff) and I've got a few general questions regarding JUNOS: 1- I don't really understand the 'through' specificity keyword for routing policy/firewall filter matching prefixes. I looked through the study guide, but I can't really figure…
-
Unable to ping
Hi all..in our test environment we have a pc connected to firewalll which is connected to modem. 192.168.1.2 59.96.48.58 PCFIREWALLMODEM 192.168.1.6 192.168.10.3 I am able to ping the untrust interface but not the modem and no access to internet also. I have enabled policy from trust subnet to untrust any for ping. I have…
-
JNCIE-SEC tips
Preparation Tips for the JNCIE-SEC Exam « ShortestPathFirst A pretty short but valuable read imho. Personally I think it's a great help to see what hardware he used (and how little) for lab prep.
-
L2L IPSec VPN between SRX and ASA, only establish this tunnel from ASA-side.
My topology as following: R1SRXASAR3 SRX has been configured route-based IPSec L2L tunnel with st0.0 unnumbered and ASA has been configured the standard L2L IPSec. By my configuration, the tunnel will established when R1 and R3 send ICMP traffic each other. In this, everythine is fine, i configure all device successfully…
-
building an Olive PC
I would like to build a physical Olive machine in ATX case. Starting from NIC's, those ones should work fine: * Intel EtherExpress Pro/100 and Pro/100B (82558 / 82558B chipset)* Intel EtherExpress Pro/100+ Management Adapter (82559 chipset)* Intel Pro/1000MT Desktop Gigabit Adapter* Intel Pro/1000MT Dual Port Server…
-
Testing - L2VPN
Understand that L2VPN will not working in Olive. Can I simulate it in a M-Series router with logical routers? Thanks
-
fast track voucher delivery?
I just took the JNCIA-JUNOS pre-assessment exam & passed. I didn't realize it was to get a discount voucher for the exam - I haven't touched Juni in over a year, was just looking around for a winter project so anyway, what I haven't quite worked out is how the vouchers are delivered - can anyone enlighten me? many thanks…
-
EX2200 console cable - like Cisco?
Hi- I bought an EX2200 switch on ebay; it arrived with no console cable or RJ45-DB9 adapter. Can anyone confirm if a Cisco console cable (either the RJ45 to DB9 "Cisco console cables" that are on Amazon for less than $5, or a rollover cable and standard RJ45-DB9 adapter), would work? The console port pinouts look similar,…
-
Passed JNCIA-Junos
Passed this exam this morning. Was a nice change from the Cisco and Linux track I was recently on. I used the FastTrack program that Juniper is offering to get a 50% discount voucher and study materials for the exam. I have to say that the study materials that FastTrack provides will give you a good foundation if you have…
-
Questions about Juniper certs
Hey guys, I was just curious about how valuable a Juniper cert is in the long run. I work for Toyota, and they live off of Juniper. That said, I haven't had much experience outside of Toyota to base work experience off of. Is juniper a large enough resource to justify a few months of training for an entry level cert?…
-
Jumping off point?
Hey guys, The sticky threads feel a little old. My new job is all Juniper. I don't do much networking, but with failing my CCNP Switch twice I think I need to head another direction for a while. What would be the CCENT/Net+ version of Juniper? And what book and lab would you recommend?
-
Home/Remote Lab
Hey all, Looking for some advice on building a lab. I'm working through the Juniper SEC track at the moment. I have access to the following equipment through work: 2 x EX4200 IDP250 J4350 SA2500 2 x SRX240 The JNCIS-SEC/JNCIP-SEC both show objectives around the SRX UTM features, IPS, and High availability. The JNCIE-SEC…
-
PAT vs NAT
So I seem to be having some confusion here... I get the difference between PAT and NAT, but Juniper seems to over complicate where/when you would use each. Obviously NAT is for one to one, one to many, etc.....but in what instance would you use PAT?
-
Help: how to configure a message over system stanza?--not system login message
Hi experts, does anyone know how to configure message over the system stanza? like below: root@R6# show /*hello world*/ system { host-name R1; …… …… } It is not login message, nor login announce. Thanks in advance.
-
Exam Prep Question
I can't seem to find the documentation supporting this question: "Which table is used to store the protocol source for a given destination?" a) routing table b) protocol table c) session table d) forwarding table I'd like the answer...but more importantly I'm trying to find the why...
-
Passed JNCIA-JUNOS
Passed this exam today with 92%. It really wasn't that hard, but I suppose if you were having to learn the network fundamentals then it would be more challenging. On reflection I think I probably over-prepared for this exam, but that's never a bad thing. I used the fast track PDFs aswell as the Network Fundamentals and…
-
JunoSphere
This press release was just announced today. Juniper Networks Unveils Junosphere Classroom; New Cloud-Based Service Simplifies Network Technology Education and Training - Juniper Networks Might be a feasible alternative to purchasing a rack of Juniper gear to study on.
-
JNCI?-SP reading material?
Anyone tackle the SP track yet? I have some books from back when it was M and T series but I don't have anything updated since then for it. Any book/study recommendations outside of the official training classes?
-
Juniper??
Currently I am studying for CCNA. Sometimes I am checking the job opportunities and I see "Juniper" at the requirement section so often. What do you think guys? CCNA and then Juniper Certificate? Necessary? makes you one step ahead ?
-
Jncip-ent
Howdy. Long time lurker first time poster. I just came back from passing the JNCIP-ENT. It was fairly difficult and covered a large range of material. I registered to post this as I have found extremely little information regarding this test. It's usually nice to read about other test experiences so you know what to expect…
-
My quest to conquer the JNCIX-ENT track
Hey there fellow networkoholics, After attaining my CCNP a couple months back I have decided to go after a couple of the Juniper certifications. Since the JNCIA-JUNOS is a prerequisite I will first have to get that one done, which I anticipate to do in the next 8 weeks or so. After this, the JNCIS and JNCIP will be next on…
-
GNS3 Olive with cisco routers
It seems to me the juniper router I'm running on the GNS3 cannot communicate with the Cisco router even though both interfaces are up! ANy help?
-
Passed JNCIS-SP
Passed this exam today by the skin of my arse. For preparation I just attended the AJSPR course, used the Junos Intermediate Routing books, and the Junos service provider switching book. It would have been helpful to have spent some more time studying MPLS & VPN's prior to taking the exam but I had a free voucher so I…
-
Any clue on when Juniper will....
include logical systems in their SRX lineup. I heard someone say that it is coming soon on JUNOS 10 code. Any Juniper gurus know for sure? It would be nice to see an SRX capable of implementing 5 -10 logical systems, or 15 like the M Series do.
-
Passed JNCIE-SP
So a couple of months ago I took the JNCIE-SP when it was in its alpha state. It was a brutal test which was skinnied down quiet a bit after the alpha. So today I just found out that I did well enough that I was awarded the cert. :D Granted I just needed to take my JNCIP-SP to get the recert on the JNCIE-SP since I already…
-
new JNCIE-SP lab
Hi all, Juniper launched new JNCIE-SP lab since July. The official description of lab topics is very unspecific and does not help at all. That would be very helpful if anyone has any knowledge on lab format, particularly on the following: - what kinds of IPv6 configuration should be expected - basic (addressing, routing)…
-
Jnsa & jnss
Has anyone had the opportunity to take either of these exams? I have recently been hired by a Juniper partner as a Sales Engineer and the Juniper rep recommended going through each training program to get up to speed on Juniper products quickly. Any thoughts?
-
JNCIA study time
Hi all, This is my first foray into the world of Juniper. I'm currently studying for the JNCIA (JN101) exam and I'm just wondering how you long you guys spent on it. I'm more than happy with the network fundamentals involved. I'm reading the fast Track PDFs from juniper and also going through the 'Junos as a second…
-
Are These Still Valid for JN0-101?
Hi, I was wondering if the two PDFs that have been previously mentioned JNCIA-JUNOS Study guides part 1 and part 2, are still valid for the JN0-101 exam? If not is there anything more up to dat since these say they are for the JNO-100 exam? I may have a need to study for some Juniper certs and want to get my study ducks…
-
Passed JNCIP-SP
Hi all, after doing lab + read the JNCIP-M book by Harry Reynolds, AJSPR, EDU-JUN-VPN, + lack of sleep + share my time between studying and office project.. i finally passed my JNCIP-SP. the blue-print for JNCIP-SP is this : * OSPF * IS-IS * BGP * Class of Service (CoS) * IP Multicast * MPLS * Layer 3 VPNs * Layer 2 VPNs *…
-
help with ospf traffic-eng lab
hey, i'm trying to make lsp from r2 to em4-interface of r4 in this topology: ImageShack® - Online Photo and Video Hosting it not working, if I change the "to" statement to r4 loopback the lsp is up. why I can't make the lsp on the em4 interface.
-
Do Firewall Filters on Olive Work ?
Guys, I built the filters below to block ssh traffic and everytime I apply to my em0.0 all traffic stops through the interface. What am I doing wrong to cause this ? firewall { filter local-access { term terminal-access { from { address { 192.20.20.28/32; } protocol tcp; port ssh; } then accept; } term no-access { from {…
-
Console cable
Hey guys, I am a cisco guy so help me out here. I just got a J2300. Would I be able to use a console cable that you get with Cisco or do I need something else? If you could post a link that would be very helpful!!!
-
Question regarding default routing in Juniper (OSPF and BGP)
* In Cisco default routes can be propagated by using the default information originate always even if a static default route does not exist in the routing table. Is there a similar command for JUNOS? * In BGP a default route can also be sent to a neighbor by using "default-originate" command, Is there one similar in…
-
passed JNCIE-M Today
Finally did it today...called Dvaid couple hours after i finished the test..he gave me the good news..waiting for the official e-mail and the number.. thanks everyone for their help and advise..
-
Olive Help
So I finally have my olives up and running but am unable to communicate between them or with my host. I have each virtual machine using network adapter vmnet1 (hostOnly). I have assigned vmnet1 an IP of 192.168.15.1/24 and set interface em0 in my olive as 192.168.15.111/24 I have tried disabling antivirus and windows…
-
VRF issue in Olive with junos >10
Hi. This is my 1st post. I really need your help. I'm trying to configure a VPN in olive. This is the topology : CE1PE1P1P2PE2CE2 I've configured a VPN between PE1 and PE2 but I'm not able to ping the loopback IP address of PE2 from PE1 and vice versa, although the routes are present in the routing table. I can only ping…
-
My team is hiring (looking for people)
Hey guys, I've posted a thread in the IT/Jobs forum. http://www.techexams.net/forums/jobs-degrees/66558-my-team-hiring-looking-people.html Thought I'd post it here too for people who don't visit there often. :)
-
Passed the JNCIA-Junos
Yes, my first certified step (pun intended :) ) to the dark side. I followed the Fast Track materials for about 2 weeks, with a little delving into the JunOS Cookbook and some of the JunOS Security Handbook (not much though as I'm on a pretty tight deadline to get the basics down before we do some proof-of-concept with…
-
juniper home lab for sale
Juniper home lab and extra for sale 1: netscreen-25 x1 2: cisco 2511 terminal server x1 3: juniper J2300 router x7 4: cisco 2950 switch x1 5: juniper Ex4200-24 switch x 2 6: juniper m7i x 1 7: cisco VPN concentrator 3500 x1 8: rack 9: PC-Olive X 2 PM if interested.
-
Resident Engineer with Juniper
I have like two opening for RE positions. First one: Location: Phoenix, AZ Duration: 6 months contract Primary Product / Technology: EX switches (both core & branch) Secondary Product / Technology: Branch SRX Second one: Location - Seattle, WA Duration - 12 months contract Primary Product / Technology: Core EX switches…
-
EBGP - JNCIP-M's case study
Hi, Case study in the StudyGuide shown R5 advertises 10/8|172|192 to the ibgp. May I know any criteria which router is the best to advertise these routes (assuming the topology is different) Page 574 thanks & hope to hear from u soon