-
Frame-Relay PPP Subinterfaces Configuration
Anyone have experience with Cisco Packet Tracer? I have the FR-S1 (frame-relay cloud) configured this way: S0 - DLCI 17 - R8 S1 - DLCI 18 - R7 S2 - DLCI 19 - R10 However, I can only map Serial0 - Serial1, Serial0 - Serial2, or Serial1 - Serial2, I can't assign S0 - S1 and S0 - S2 at the same time That being said, R8 cannot…
-
VLAN Question
As I finish the Cisco Net Acad course 3... I have one question left that I can't seem to find any answer in the materials for. I suppose I could ask my instructor, but I won't see them 'til next week so here it goes: How the &*%k do VLANs know what their ip address range should be? I mean, if I assign all devices for VLAN…
-
More free CCNA Labs/Practice tests?
I see some labs on here, but a bit outdated on commands, etc... Does anyone have any links to updated and free CCNA labs? I'm taking my CCNA in approximately 2 weeks. I'm pretty comfortable with the material and details, but I just want to make sure I can handle the sims without struggle. I hear everyone talks about…
-
Cisco 1721
This was my first time purchasing a router. While it only has the 56k WIC interface, I have learned some things from it. When I got it in the mail today, the thing would not boot. So I learned how to use XModem command. I also realized how slow it was. It was going to take 2 hours to transfer a 5mb file -_- through the…
-
Re: Subnet ruler
Came across this tool which is great for laying out all types of networks: subnetruler Especially great for those seasoned networkers out there.
-
Question about ICND1 lab sim...
I've been going through the lab sims on cisco's website. I was wondering if they're similar in the actual exam, once you've completed a specific part it'll then go on to the next part. I'm just not entirely sure what to expect on the exam.
-
Testing 11/29
Ok, so completed the CC Boot Camp On Demand course 2 weeks ago. Going over some practice tests, labs/sims and have scheduled the test for next week. Wish me luck.
-
Port Numbers: The three different types
I have a question about port numbers. Currently,I am reading about how there are three different types of port numbers that IANA ( The Internet Assigned Numbers Authority) has standards for. Well known port numbers ( Numbers 0 to 1023) These are reserved for Service and applications. Registered ports (Numbers 1024 to 4951)…
-
No SSH option with Packet Tracer 5.3.1?
So I'm working thru the CTTC Cisco CCNA Lab manual and there are a couple of exercises of using SSH to go from pc to router. I am able to Telnet from various devices ok, however I'm guessing by Google searches that SSH isn't an option in Packet Tracer. thanks
-
Cpa 2511
Hello all, I have recently got a CPA 2511, i am having trouble trying to find an IOS for it and its running 11.0 Here is the spec of it IOS (tm) 3000 Software (CPA25-Y-L), Version 11.0(6), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Thu 21-Mar-96 00:34 by hochan Image text-base:…
-
Creating a broadcast storm
Just for testing purposes, does anyone know HOW to create a broadcast storm? I tried config "switchport portfast" on all interfaces as well as turning off "no spanning tree vlan X" but still no crazy lights on the switches. Has anyone ever tried making up on purpose a b'cast storm?
-
When does 802.1q use a VLAN header?
I'm taking the Boson exam right now and I just realized that 802.q1 does not use a VLAN header if the native VLAN is other than 1. I thought, for some reason, that anything outside of native VLAN 1 (which is default), would require a VLAN header. Here's what I'm looking at. http://dl.dropbox.com/u/2526790/Capture.PNG (for…
-
CCENT Certificate... How long does it take to have it???
I know this is a newbie question but how long does it take to get ur CCENT certificate thru mail??? thanks in advance for the reply
-
ICND2 official cert guide by Odom, 3rd edition
I got the new edition of Odom's ICND2 book a couple of weeks ago and so far i'm really struggling with it. Finding it hard to read but there's also many mistakes in it. For example on page 428 it refers me to "example 12-1" to demonstrate how wild card masks can be configured for EIGRP. I look on the same page for this…
-
Discontiguous network question
I just struck the following practice test question: "A network is referred to as discontiguous if it has been subnetted but the subnets are not physically accessible to each other via a router." The correct answer is True, I answered False. If you have three routers, A B and C all using subnets of the 10.0.0.0/8 network,…
-
When using SDM to enable NAT
When setting up NAT using SDM the commads one of the commands it sends to the router is for a remark about the acl. access-list 1 remark SDM_ACL Category= 2 When it says category what category talking about, and are there only 2 categories
-
connectin establishment, session & TCP
What is the difference between the session layer and the transport layer with respect to connection establishment? TCP uses 3-way handshake, while session also starts, maints and terminates connection, so what is the difference? Maybe I just discovered a duplication of functions...
-
Ouside Global and Outside local are they alway the same
I got down that the inside local is Hosts IP address and outside local Hosts routers public ip address (the the inside get translated to and send out) and most of the time (I think) that both outside addresses (global and local) are the same when the you see them form the host pov. But what scenario would they be different…
-
DHCP for CCNA
How much does the exam cover about DHCP? According to the ICND2 Official Study Guide and ICND1, these books did not cover anything about configuring DHCP pools, etc... I'm taking a few practice questions and curious as hell as to why this would be on the exam and not even briefly covered at all in the official books?
-
Router VS NAT
I know what NAT is and I know what routing is but whats the difference. I know NAT is more secure acting as a firewall and that it replaces the host IP address with its one (doesn't matter if the host IP address is Private or not). Can be used with more address on the private side, Same for the Router cause routers also…
-
Summary route for EIGRP
hi, I want to summarize the following networks for eigrp but think i maybe making a mess of it: C 50.0.0.0/16 is directly connected, Loopback50 C 50.1.0.0/16 is directly connected, Loopback51 C 50.2.0.0/16 is directly connected, Loopback52 C 50.3.0.0/16 is directly connected, Loopback53 C 50.4.0.0/16 is directly connected,…
-
Re: Determining hosts/subnets
When designing a network, say you're looking to get a certain amount of hosts & subnets. Using the Network IP address, what's the best way to go about figuring that out? Is there a math formula that you can use?
-
ICND2 bombed x 2 - looking for pointers...
Hello all, this past saturday, took the icdn2 for the 2nd time and ended up with a 790 =/ (70 point increase from the 1st attempt). Felt very down and frustrated, but feeling better now (the wife kinda put things in perspective so grateful to her). i just need to stick with it and get this done. i feel i'm pretty close.…
-
Ccent - icnd1
Hi I'm planning to take my ICND1 very soon, i have done the week training course and have used the CBT nuggets video's but when i try online questions i am still struggling a bit. Anyone got any good tips!
-
Finally passed ICND1 today....
Thanks to this forum i finally passed ICND1 today with a score of 837 --- 804 to pass. This is my second time to take this test wherein my first try i got a 787. Review Materials: Odom and Lammle Jeremy video Packet tracer ---- got to hit the books again for the full CCNA (ICND2)
-
CCNA Wireless Lab Rental
I have found a few CCIE Wireless lab rentals, but not any CCNA Wireless labs. Does anyone have experience using any or know of any. The ones I found that were geared specifically for CCNA/W seemed to be dead. Thanks for your help, Kevin
-
Where can I get power cord for Cisco switches?
Can I use any power cord that will fit into the cisco switch or do I need a specific kind? Where can I find it? Thanks.
-
Frame "filtering" terminology
Todd Lammle describes it as: "If the destination hardware address is known and listed in the database, the frame is only sent out the correct exit interface. This preserves bandwidth on the other network segments and is called frame filtering." Elsewhere I've heard it described as the switch not forwarding a frame out of…
-
Opinions wanted on a CCENT/CCNA lab
I just wanted to get some opinions from everyone on to which resources to use for my CCENT/CCNA studies. As far as books and CBT's I have that covered very well. I have Wendall Odom's ICND1 &2 books, Todd Lammle 6th and 7th edition CCNA, CBT Nuggets CCNA series. Chris Bryant's stuff as well plus two more Cisco books. So…
-
Commands to enter step by step
I'm looking for a txt manuel or pdf file or e-book that give you a step by step walk through of all the commands used to complete a task. For instance the following commads will Disable CDP globally NY-R1>enable NY-R1#config term Enter configuration commands, one per line. End with CNTL/Z. NY-R1(config)#no cdp run…
-
CCENT Exam
Hi, I intend to do the CCENT exam very soon but I am still not sure what the current exam pass grade is. I heard it was firstly 849 and now it is supposed to be 804. Can somebody who has done the exam lately clarify what it actually is. I know it is subject to change at short notice by Cisco themselves hence the…
-
Passed 640-802 earlier this week.
I would love to type up a whole hoopla, but don't have the time.Work, holidays, and cramming for the SY0-201 before it expires are taking priority. So, just a quick note. I took the Network Academy classes at my local B&M, then went on to self study for a few months, and took the exam 2 weeks ago. I failed that first…
-
Recommended Reading
Hi, I recently passed my CCNA and am looking to go down the voice route. Currently work as a telecoms engineer (avaya/nortel) and plan to move onto cisco environment in the future. The only reading material I can find is [url=http://www.amazon.co.uk/gp/product/1587204177/ref=ox_sc_act_title_1?ie=UTF8&m=A3P5ROKL5A1OLE…
-
Question on Broadcasts.
Hello, I'm new to networking, and I have a question on broadcasts. Let's say, there are 4 hosts A, B, C, D, connected to a switch, which is connected to a router then to the Internet. If a broadcast is sent from host a, where does it go? I would think that the broadcasting message would be sent to the switch then down to…
-
Finally!!!
I got my CCNA on the second try! after failing the ICND2 I started doubling back on what I felt were my weak topics with good results. I was getting bummed for a bit but getting this cert helped keep me in the game :)
-
What is the link layer protocol of serial cable connection between routers?
for the ethernet or token ring, it's 802.3/802.4/802.5. Is there any such IEEE protocol for serial cable connection link?
-
The show command ... what to look for
I'm after my CCNA and the CCNP will be next but I figured out something. When your troubleshooting you mostly do show commands. Which bring this to question what do you look for in the many different show commands that should not be in the show command For instance when using rip and doing a show command on a interface and…
-
How does a router figure out which exit-interface to use?
Here is network addressing for the IP networkrouter network addr interface addrlab_a 192.168.10.0 fa0/0 192.168.10.1lab_a 192.168.20.0 s0/0 192.168.20.1lab_b 192.168.20.0 s0/0 192.168.20.2lab_b 192.168.30.0 fa0/0 192.168.30.1 To add a static route on lab_a, I run,lab_a(config)#ip route 192.168.30.0 255.255.255.0…
-
Question about CCENT
Has anyone used Tom Lammels book? If so how good is it compared to the cisco press book. I already finish viewing the Train Signal course for the ICND1 course and need a book to solidify my understanding and cover any missing "holes".
-
Just Passed CCENT !
Just passed the CCENT. Got a 912 out of 1000, pretty pleased with my score. I posted this in an earlier thread, but for those interested I used the Odom (cisco press) book, CBT Nuggets, and the Bosom exam SIM. I learned a lot from these boards as well, definitely a great source of information and inspiration. I enjoy…
-
Cisco certifications
Hello all...just joined the forum and found it to be very helpful. My brief introduction: I have no background in networking what so ever but have been always eager to join this field. I did some research on cisco website about different types of certifications and I guess gotta start with CCNA. I am planning to do my CCNA…
-
Subnetting question, why was the problem worked the way it was?
Still working... Here is another one that has stumped me from subnettingquestions.com If converting over to binary, this is the result: 00001010.00000000.00000000.00000000 11111111.11111111.11110000.00000000 I orginally took all of the 1 values and tried to use that to get the number of subnets, but that number is way to…
-
Study Note Taking
I find myself basically plagiarizing items into my notebook. What is an effective way of doing this, without consuming a lot of time? I thought about writing basic information with a reference page number, but I do not know how effective that would be as I intend on making flash cards in the future. I have also thought…
-
STP cost
Hello TechExams :) I'm curious about the way STP costs work. I'm reading the book again (prior to posting here), but I just want to make sure of something. In the topology below, S1 is the root bridge. I thought it sends its cost as 0 by default to all connected switches. That being said, according to the text, S2 changed…
-
Should I wait til I schedule exam to start studying
I was wondering, finacially its a little t ough for me right now but I have everything I need to start studying for my CCNA. I hate to put all that info in my brain and dont have the money to pay for exam yet so I was wondering should I wait and schedule it first or just start studying anyway. A lot of people say schedule…
-
Cisco 2620xm : error opening tftp://
Hello! I have a cisco 2620xm router and i want to upgrade IOS, but it's display : Error opening tftp:// (time out) Configuration : Cisco 2620 : int fa0/0 : ip add 10.10.10.1 255.0.0.0 (no sh) PC with Solarwinds TFTP : ip 10.10.10.2 Ping works great but i can't transfer files Thanks!
-
WIC Interfaces
Hi every one, I'm now decided to buy 2 X 1760 routers and 1 X 2620XM ,thats give more flexability in feuture to add more gears for CCNP, but I want to ask about the WIC interfaces... There is WIC-2T serial int. which is run from 128Mbps to 1.544Mbps.. right? also there is WIC 2A/S serial int. which is run only 128Mbps and…
-
theory vs practical implementation
I'm wondering how much one should focus on each aspect for the exam?
-
31 days before CCENT Cert Book
Any opinions on this book : 31 Days Before your CCENT certification by Scott Bennett? I am using Odom's ICDN1 right now. Should I just save the $?
-
STP Video
Hi Guys, I created a video on the basics of STP and was wondering what you all thought.I was only going for a basic overview as to how things are elected but any comments are welcome. STP Basics - YouTube
-
Is this true?
I'm considering taking the 640-802 CCNA Composite exam, and I hear that if you pass it, then you will also get a CCENT. Also, does anyone have a picture of what the CCNA wallet card and/or certificate look like? Thanks!
-
Passed the CCENT today!
Passed the CCENT exam today with a 874 score. I would have scored higher but I screwed up a router/switch configuration simulation when I inadvertently hit NEXT at the right hand bottom of the window after answering the first of 4 questions. There was even a confirmation window that came up that I clicked OK so I only have…
-
ICND 2 Scheduled for December 3rd
Hello All, I'm ready to retake the ICND 2. This will be my second attempt. I failed the ICND 2 back in August. I was really gun ho to retake it in September. However, I decided to take the advise of you guys here at the forum and really dig into the material. Why belong to techexams and not benefit from the support? = ) I…
-
TestOut Labsim
Has anybody used this for the CCENT? I have the CCNA version and the end of module questions seem really difficult compared to the questions in the book I'm using (CCENT For Dummies). I say this as I got 10/10 in my OSI layer chapter in the book and 35% on the same module on Testout! Is this because its the CCNA version or…
-
Subnetting
I'm struggling with subnetting i get the idea of it and principle's i just can't apply it to different questions. I took my CCNA 10 years ago and passed guessing on the subnet questions sad i know....Now 10 years later working in IT, i wanna renew my ccna and go farther. Now i realize i need to know subnetting i feel like…
-
How much should I pay for 2950 switch or a 1760 router?
I'm looking to build a home lab. How much should I pay for a 2950 switch? How much should I pay for a 1760 router?
-
1st Attempt ICND1
I Passes ICND1 today with Score 900, I had 15 min left before the end of the exam! it was really fare for the topics covered for this exam.. CCENT/CCNA/todd lammle was great, CBT vedios/Jermey was cool, alot of labs on GNS3 and PT (I don't have home lab yet), and SUBNETTING-SUBNETTING-SUBNETTING..wow.. a BIG THANKs FOR YOU…
-
Here is a little guide for subnetting just added by me a few moments ago
[FONT=Verdana, Arial, Tahoma, Calibri, Geneva, sans-serif]Ido not have any idea if this short thing will assist you but, i'lltry. Subnetting was my nightmare at the very beginning of my first[/FONT][FONT=Verdana, Arial, Tahoma, Calibri, Geneva, sans-serif]CCNA[/FONT] [FONT=Verdana, Arial, Tahoma, Calibri, Geneva,…
-
Half duplex vs full
Ive read that a half duplex configuration will result in the Ethernet sharing the collision domain on that segment. Why is this? I thought if it was half duplex then only one would send at a time and collisions would be avoided? It makes more sense to me if it was full duplex then signals are going back and fourth…
-
Wendell Odom's books for ICND1 & 2
I would like to thank you all for your efforts and contributions in this Amazing forums upon which I recently stumbled .I have a feeling this is going to be very useful and resourceful during my newly born journey in the world of networking Which I find to be really fascinating the deeper I get into it .now I have one…
-
OSPF network command
I'm only curious about something. Does these two commands advertise the same thing on an OSPF network?network 10.1.2.0 0.0.0.3 area 0 andnetwork 10.1.2.2 0.0.0.0 area 0 I see on this Boson exam environment, there's a router that's configured with the second command, and it advertises perfectly. What does the OSPF router…
-
ICND1 this morning
Well, I'm leaving shortly to take the exam. I feel prepared, but you never really know for sure until you see the score at the end. Using Odom/Lammle/Bryant plus my home lab for resources. If I don't post back later, you can safely assume I bombed it and am consoling myself with a nice break from all things digital. Either…
-
Frame Relay cloud diagram
Forgive me for my frustration... But is the topology on the right the same as what Cisco's topology show on the left? Minus the labels? I get all confused when I see the Cisco topology sometimes. There's S0/0/0 on the side of R1, but at the same time there's a freakin link connecting to R2 and R3, and a link connecting to…
-
Controller and AP for Lab
I am studying for CCNA Wireless since I am going to need it for my new job. However, I do not have a controller and AP. I am not sure which model I should get. I already have 3550 switch that I can use, can you guys recommend a controller and AP I can buy from eBay for my lab? When I buy a controller, do I need Cisco…
-
Frame-relay interface-dlci contradictions?
Sorry for all these threads, I'm just really trying to master this material before I take this exam. According to the book's configuration and the DLCI labels on top of the routers, each router is mapping the DLCI on the opposite side... According to the test, the interface-dlci number is using the labels on top of the…
-
INE CCNA videos
I just noticed INE is giving free access to their ccna videos. This should be good for those that need a good resource.
-
Need OSI model Help
Morning, I am currently attending my local community and I am taking my CCNA/ Cisco Networking Academy course. We are currently working on the OSI model and I am not happy with the score of 87%. I thought I knew a-lot about the OSI model but that test took a-lot longer then it should. I printed out from google images an…
-
My Voice Lab - Suggestions?
I have two 2621XM routers (for remote site sim)that are running with 32MB/16MB that I am going to run c2600-adventerprisek9-mz.124-15.T8.bin with CME 7.1 so I am upgrading them both to 128MB/48MB. In addition I am going to purchase an AIM-CUE module and load that up with Unity Express 7.1 to be installed in one router. I…
-
Definition of "eq"
I am very new to CCNA studying. But I understand a lot already from experience in networking and Microsoft. Can someone define what "eq" is for in access list syntax? Thanks very much.
-
CCENT FAIL - Suggestions
I took ICND1 on Friday and received a 799, 804 to pass. Although I was upset with the outcome I was happy that I did as well as I did considering how in-depth the questions were. I felt prepared but not I know what I am lacking. With that being said, can anyone give me advice on my approach below? I want to become a CCNA.…
-
VoIP At Home
Hey guys, I want to set up a VoIP environment lab at home but also use it for my main phone lines. I have a 2801, POE Switches, and a few Cisco 7960 IP Phones What are the requirements or service provides that can give me some good deals for SIP trunking with out so much extra equipment. :) i want to start my VoIP journey…
-
Bits determining type of MAC addresses?
Hi In the 6th edition of Todd Lammle book, in chapter 1 of Ethernet Networking, about ethernet MAC addresses, it is mentioned that the high-order bit represents the Individual/Group bit (47) & for Global/local bit is 46th bit of the MAC ADDRESS's OUI . The figure which I pasted is from wikipedia.It is saying that the LSB…
-
IPS/IDS Labs
Hi All Been a while since I've posted anything on techexams. A quick question regarding labs for IPS, I've completed loads of labs on security covering a wide range of the material, and am pretty familiar with the SDM interface. Problem is, I'm finding it very difficult and time consuming if not impossible to complete all…
-
Classless vs Classful
Good morning all, I have been studying for the ICND1 for the past month and I must admit, I am very familiar with at least 95% of the material covered. I have taken the Cisco course in College about 2 years ago, but since then, I've been going the Microsoft route to increase my performance at my last job. Recently, I've…
-
Passed today
Passed today. Tired of studying, wife is tired of me studying, just going to relax for a while. Maybe get a haircut and get a job.
-
dumb question....
what is the order of operations used to get a specified number of subnets and hosts ?...for example, i need 5 subnets with 5 hosts apiece, but the wildcard masking operation only leaves me with 3 subnets when i plug in the 5 and 5 for the subnet and host operations...i hope this makes sense; thanks for any help you guys…
-
ABout to take ICND2 on Friday
I have been studying for a couple of months now with Odom's 2nd, GNS3, and some flash cards. I am still nervous as hell, but, now that I am heading into the final hours. I wanted to know how I should be spending my time? My plan is to setup labs for producing a network for ACL, EIGRP, OSPF, etc. with all of the bells and…
-
CCENT Scheduled for 11/22
I think I'm ready to take the test today, but this was the testing center's first available appointment. Wish me luck!
-
1760 Mounting Question
Can I put rack brackets on the back of a 1760 router or not? I was planning on rear-mounting my routers and front-mounting my switches so I don't have cables going from the back of my rack to the front.
-
ACLs, Loopbacks & choosing where to put them
So i've been studyin ACLs for the past couple nights. The first night I was studying via a remote connection so I didn't have physical access to my lab. No problem, I thought, until I started trying to apply the ACLs to loopback interfaces. Long story short (really not that long of a story) If I applied the ACL to the…
-
Passed ICND1
Hi All, Passed my ICND1 exam yesterday with a score of 962!! The exam was much easier then I though it would be and finished with plenty of time to spare. My study material were subnettingquestions.com - Free Subnetting Questions and Answers Randomly Generated Online CBT Nuggets - Jeremy Cioara Official ICND1 course…
-
Passed CCDA (640-864), but disappointed
Well, I passed the new CCDA exam on Friday and boy was I disappointed. It's not that it was difficult, just that whole exam felt of rather low quality. I suspect that Cisco has probably outsourced the job of exam composition to a non-English speaking country. Quite a few of the questions seemed to have issues with…
-
ICND2 is a no-go : ran out of time.
Hello all, So took the ICND2 this Saturday for the first time and unfortunately came down to the wire, I had exactly a minute left and 8 questions to go. I basically guessed them all. Ended up with a 720 (825 passing). The exam is VERY, very fair, in the sense that one must know the material inside out - specially VLANs,…
-
AAA RADIUS (IAS) rollout but cannot access console when active?
I am trying to implement RADIUS accross my network and have managed to get it working using IAS. The only problem I have is that I cannot gain console access once I get RADIUS online. I have tried removing passwords, adding local passwords and ammending the AAA, but I can't seem to resolve the problem IOS C2960-LANBASEK9-M…
-
Access Server Recommendations
I want an access server that I can connect 3 routers and 3 switches to for my CCNA home lab. I was looking at the 2501, 2511 and 2509, are there any differences between these? How much memory and what IOS will I need for the server? Is there anything else to consider. Are there any other models you'd recommend? Also, is…
-
Realistic jobs and salary for the CCNA?
Hi, I am preparing to study for my ICND1 and ICND2 exams to get my CCNA qualification. I don't have any IT qualifications and I was hoping this could get my career kick started as I've been out of work for nearly 5 years due to family reasons. I was with some mates today who are in the IT sector and they basically said…
-
help with advice for ccna
I am a IT fresher with no experience yet and already done with todd lammle CCNA guide, Odem(ICND 1 & ICND 2), CBT Nuggets. Practiced on simulators(Packet Tracer, GNS3, VMware). Now i am all set for the exam and need only one month before exam, but my colleagues say you should first get some experience in this field and…
-
Boson or Transcender virutal labs?
To supplement my study with Todd Lammle INCD1 study book, I am considering using Boson or Transcender virtual labs. I have never used software from either company and I am hoping someone can recommend one to me. Also, anyone know if the Transcender practice and questions for the INCD1 are helpful? Thanks for any feedback.
-
New 640-461 Exam
Hey all, Who is studying for this new exam right now? I bought and studied the old 640-460 exam book thinking the differences wouldn't be that great but they really are. All this stuff on CUCM and I don't have a lab to actually poke around in. For those studying and/or those have already passed the updated exam, how did…
-
VLSM Practice Questions...
Can anyone point me in the direction of a good source of variable length subnet mask questions... I've had a look on the t'internet and have only found the odd one or two questions dotted about the place. I understand the concepts completely and just need to polish off applying VLSM's quickly and accurately before I put in…
-
Passed Composite Exam
Finally I am a CCNA! I passed with a 854. Finished the test with 3 minutes to spare because I really took my time on each question. It was a much fairer test (less confusing wording) than the ICND2. I highly recommend the one test approach if you can subnet quickly.I used Todd Lamel's book "CCNA 7th edition Study Guide"…
-
ICND1 (First attempt)
Hi all, Long time since I posted here, just looking for some advice on the ICND1 exam. Ive been using the 'train signal' video's by Chris Bryant and find them very good, can anyone recommend anything else? Thanks for all replies. Cheers
-
Setup Linksys WRT54GP2 with CISCO 3640
Not sure if this is the right place for this but mods feel free to move. I am running my home network on Cisco Enterprise equipment - a 2950 Catalyst and a 3640 Router. I have NAT setup and DHCP and all is well there but I have been having a major headache with a Linksys WRT54GP2 Router. FYI, this is a VOIP Router and I…
-
Cisco Catalyst Ws-2950-24 port-Help
Can anyone please help. me What is the latest updated ios for cisco switch 2950 and from where I can download updated ios for this real hardware ? I know most of them are cisco expert in this forum so friend please help......... Thanks in Advance.
-
Failed ICND2 Need Help!!!
I have failed the ICND2 for the second time. This time with a score of 804 of 825 so I am really close. My problem is I don't know what I am missing or not getting. I feel comfortable with most of the topics. My results were 93% VLANs 75% IP addressing 60% configure cisco devices 50% NAT & ACLs 67% WAN The last time I…
-
Stp
Hi Everyone, First topic of my ICND2 studies...STP! and it's kicking my ass. I'm going to keep hitting the material and hopefully I'll have it down no problem soon enough. One question at the moment though. What exactly is the root bridge? I understand that all switches think they are the root until they go through the…
-
ICND1 partial correct answers
Does the ICND1 exam give you partial credit for questions that have been answered half right. Example: If you have to choose 3 answers on a multiple choice and get only 2 of them right. Also is VLSM covered in ICND1? Thanks for your help.
-
PPP Frame Relay and Static Mapping
Okay, I think I could be misunderstanding something but would like someone's opinion. I originally chose A for my answer, but the answer was AE. Why would the frame-relay interface-dlci static mapping command need to be used when moving from a physical interface to a point-to-point subinterface? The text states that…
-
First Rack Suggestions/Help
So I'm putting together my first rack for my CCNA lab and I want it to hold the following: 3 2950 switches 1 1841 Router 1 1760 Router 1 2621XM Router 1 Access Server 1 Power Strip This is the rack I was planning on getting: Amazon.com: OnStage RS7030 Rack Stand: Musical Instruments However, the 1841 is too small to be…
-
ping issues
Ok,I know this probably sounds like a real noob question but I have to ask. Consider the followig scenario: R1(10.1.1.1)---->(10.1.1.2)R2(10.2.1.1)---->(10.2.1.2)R3 Loopback on R1,R2 and R3 and 1.1.1.1,2.2.2.2 and 3.3.3.3 respectively. I have placed static routes for the loopbacks on each router to the other 2 routers. Eg.…