-
Am I doing too much?
Over the past year, I have been interested in Voice. I wanted to attempt it before Feb 28th but I didn't want to rush through it and retain nothing. Now, having to deal with the way Cisco release material, I am thinking about taking a different route. We have old voice material at work so I am planning on using those books…
-
Help me to know an Interview question for CCNA, CCNP
Hi Friends, Please can you help me to get more information regarding network support engineering question (CCNA, CCNP), I already got my CCNA certificate and Iam right now with CCNP processes.... Please I have an interview in Houston, TX, this is my first interview, please if you can help me to know more about what kind of…
-
CoS QoS
Hi, Im sure quite a few people on the QoS exams can help but there must be some CCNP folk that can answer this too. When a frame is marked with a CoS value and then transferred across a trunk link, everything that I read implies that the 802.1Q info is stripped from the frame on receipt, this must include the CoS marking.…
-
IP OSPF Authentication keys
Hi, I've just been messing around with OSPF authentication and had some questions. In the OCG it says "To avoid having network failures during this cutover, OSPF actually sends and accepts messages that use all the currently configured authentication keys on the interface." (P.161). However, this is where I had some…
-
IPv6 HSRP
IPv6 doesnt allow me to configure a global unicast address a HSRP virtual address? Or I'm not enabling something Router1(config-subif)#standby 1 ipv6 ? X:X:X:X::X IPv6 link-local address autoconfig Obtain address using autoconfiguration
-
Bring up a VPN Tunnel?
Guys is it possible to initiate a VPN tunnel by pinging a inside loopback address?
-
track
Hey guys, I am a little confused on tracking a route. Say I HSRP and I have a route to a partner's network I want to track. So I create a tracked object correct? (see code) Since this is a static route, it should have a metric of one. if it has a metric of anything other than 1 (since there is only 1 route there) it would…
-
Passed Route 976/1000 - point. My study tips.
Passed the ROUTE exam yesterday with 75 minuttes left on the clock. You really gotta know your stuff with this exam - I recommend doing a lot of labs, knowing your AD's for the various protocols and really know how to redistribute between protocols ! I scored lowest on OSFP and EIGRP even though that was the topics I felt…
-
Rescheduling Pearson/VUE exam
Anybody know how many times you can reschedule a Pearson/VUe exam before they start charging you? I bought a full price voucher so I don't think it expires for quite a while. Every time I get ROUTE scheduled, something comes up that just kills my time for final review. ugh
-
Best CCNP exam order?
Just checked the FAQs but the info seems old & outdated. Any suggestions as to what order to go in for the 3 exams? Anyone taken the CCNP Security? What about those 4 exams? That's actually what I'm shooting for... but I might pursue the R&S CCNP first/instead...
-
BGP+MPLS Composite Studies
-
Question regarding NAT session timeout
Is it possible to set the NAT session in PAT to a value other than the default? I'm running an application for testing and it looks like everytime the sessions expires, it goofs up! I have been searching cisco documentation for a command where I can set the session to something like 20 minutes or more but cant find…
-
CUCMBE in VMware troubles
Hey TE, Has anyone been successful in running CUCMBE or even CUC for that matter in VMWare? I've been able to install CUCM without issues and am labbing things up using the demo licenses, but I'm screwed when it comes to voicemail since I can't get CUCMBE or CUC working for the life of me. My CCO is tied to a Cisco…
-
IPv6 Static Routes to an Interface without next hop subnet
I'm working on a lab from gns3vault and I think i've come across something that can't be done. IPv6 Static Route | IPv6 In this lab (item #5) It asks you to configure a static route to a loopback on a directly connected router using only the outbound interface and not a next hop address. If you specify a command like ipv6…
-
Finding the network of a VLAN
I was recently asked where I work to add a cubicle port to a specific network (let's say, 192.168.101.x). I discovered which VLAN that switchport belonged to, but how do I discover which network the VLAN is in? There is a command for that, but I've forgotten it.
-
Question regarding bgp default routes
what would cause a router to have a bgp default route of 0.0.0.0 with a next hop of 0.0.0.0 and weight of 0? usually when a router originates a default route the weight in the bgp routing table is 32768...why would that change to zero?
-
CCNP Route EIGRP Challenge Lab
I was just doing the EIGRP Challenge lab where they don't spoon feed you with the commands. On the list of the criteria was to disable multicast between 2 neighbors. I went into router eigrp 1 configuration mode and set the neighbors statically. Does that send unicast hells to that neighbor when I do that then? I was…
-
MPLS passed, CCIP done!
So I passed the MPLS exam today, and am now a CCIP! The exam itself wasn't terribly difficult. I've been going through MPLS Fundamentals, and also Cisco's own Partner Learning online courses that my company gets due to being Cisco partners. Besides that though, labbing and the odd Google to confirm a couple of concepts…
-
Route final prep and exam on October 7th, 2011
Hey guys...i'm finally close to taking the ROUTE exam after months of on and off studying. I've read the FLG and OCG from cover to cover and labbed all of the items in the blueprint a couple times. My biggest challenge now is focusing on some of the topics that I studied a few months ago (IPv6, Branch Office connectivity…
-
reason of TxD+, TxD- and RxD+, RxD- in case of Ethernet
In case of 10BASE-T or 100BASE-TX the first connector is TxD+ signal, second one is TxD-, third one is RxD+ and sixth connector is RxD- signal. Why there isn't just TxD and RxD like usually serial buses do(for example RS232 or USB)? Is this because of balanced pair operation or are there other reasons?
-
MPLS passed, CCIP done!
-
ASA 5510 price really?
Guys can you help me understand my options? You mean in order for me to buy a home lab ASA 5510? I am going to have to fork over 2,000.00 dollars for a security plus version on the low end? I have my home asa 5505 but have been doing reading and I get no contexts? really?..I want to setup at home our exact configs at work.…
-
bgp communities
hey, Im just busy reading up BGP communities as i have to do some config stuff for these at work and have a question. Am i right in thinking bgp communities are used to tag/mark routes which then can have a routing policy applied to them? For example, all routes marked with X can have a local pref of 150 set, all routes…
-
bgp communities
-
Switch 70-813
So! Going for Switch tomorrow afternoon. Round 3! This is the first cert I have had to pay for out of pocket in 3 years. So I am worried about passing. Previously my job paid for the certs themselves. I've never failed a cert 3 times, so I think statistics are on my side one way or another. I am not finding this exam so…
-
i need advice regarding CCNP/CCVP/CCSP
Hey i have been a CCNA certified person for almost 8 months. I have spent my time by repeating CCNA cases so far due to some reasons. However, i need to level up. That's why, i made a decision on taking CCNP or Voice or Security versions. I am aware of how hard to become CCNP/CCVP/CCSP certified person while especially at…
-
Regarding CCNA Voice forum
Hi, could someone from here have a look at this thread -> http://www.techexams.net/forums/ccna-voice/70396-ccna-640-461-lab.html Maybe someone from here have any suggestions. ;) Thanks and regards woisch
-
CCNP today
Took the TSHOOT exam today...with favorable results, 1000/1000. I'd have to say this was by far my favorite of the exams I've taken in this train. I started with the BCMSN, then the BCSI and waited until TSHOOT was available (didn't want to take 4 exams). I have to say that this was a good exam that tested whether you knew…
-
strange BGP problem...
BGP Attribute Local Preference | BGP So I am going by this lab right now in BGP. I get up to the point where everyone in al 4 BGP AS' should be able to ping each other. Everyone can ping everyone except ONE route. RODMAN router cannot ping the loopback of FRANCO. RODMAN's loopback is 1.1.1.1 FRANCO's loopback is 7.7.7.7…
-
iBGP on internal networks
I was studying for my route and also came across this in a production environment at my former place of work. why do we run BGP on our internal network when we already have an IGP like OSPF or EIGRP running? i know eBGP is needed when connecting to ISP or a different AS but i still need a concrete and convincing reason as…
-
show ip bgp neighbors brief
OK, so there is no show ip bgp neighbors brief command. Unless Cisco just added that without telling me. :) A decent substitute is sh ip bgp neighbors | inc nei Try it if you like, it has helped me with BGP labbing.
-
Disable SSH pix username and cisco password
Guys, When setting up SSH on a ASA you have to enter a username and password, but once you set up your own username and passwords the ASA still accepts the usernamd pix and password cisco which allows you into the CLI. I've tired no username pix but it says that the user pix does not exist, but still allows me through SSH?…
-
Does 2620 ( Non XM model) has support for fast ethernet WAN Card?
Plz reply. Thanks
-
Lab Setup - Please Educate Me
I know this has been a question that everyone asks all the time. As much research I've done about setting up the right lab, it just always throws me in circles. And I don't feel like I have enough confidence, to begin throwing my dollars into it. Goal: To setup a PHYSICAL lab to use for my current CCNP studies, that I can…
-
Best CCNP book.
So I plan on passing my CCNA this weekend coming up. (Yes that's how confident I am with my knowledge of everything I've studied) I am trying to plan ahead and order some CCNP route books. Apparently Todd Lammele doesn't offer any. I have only seen Chris Bryant and his insane package of stuff, and Wendell with his Cisco…
-
What am I doing wrong!!!?
I've been stuck on this for HOURS now. From my understanding this should work! (so apparently my understanding is wrong). Trying to set up a route-map for BGP network command to include all /30 routes in a /16 network (I have 1 set up now, but this is to "plan ahead". Here's what I have: ip prefix-list DHCP-POOL seq 5…
-
BGP Secuurity with bgp maxas-limit -viable?
Don't know whether or not I'm leaving the scope of BGP/CCIP... (Not that I care really) I started looking into BGP security, MD5 security is just a gimme, TTL security I can understand but I found this blog post (from Cisco no less) about BGP security via bgp maxas-limit limiting the number of AS'es that can be in AS Path.…
-
WebDialer and Click-to-Call
Hello, I want to create a webpage from where the clients can click on a hyperlink and directly dial to a number. As i know we have 2 possibilities: 1. Webdialer 2. Click-to-Call I cannot find a good paper that can explain to me how to do this step by step. Do you have some good books/materials/links that can provide me…
-
outdated CCVP book?
Authorized Self-Study Guide Cisco IP Telephony (CIPT), (158705261X), Jeremy Cioara, Textbooks - Barnes & Noble is this book in the material for CCVP or is it outdated?
-
A New CCNP
i passed my tshoot amazingly somehow with a 862. a low score but i did it in less than 2 weeks i have to admit the exam was was hard. i was under prepared used up all my time did not answer one ticket. I stepped in with lightly knowing the topology. just glad all them hours studying for the route and switch exam help me…
-
TSHOOT before ROUTE or SWITCH?
Has anyone here taken TSHOOT before passing both ROUTE and SWITCH? I have already passed SWITCH and was planning on having ROUTE done by now. Due to work constraints, I really haven't had the time. Lately I have been looking over the TSHOOT material and am thinking about attempting this exam.
-
Routed Access Layer question
Hello, I'm currently in the planning and designing phase of migrating a 3-story building from a strictly L2 access layer (directly to core) to a routed layer design. Quick layout: I have a /24 data and voice subnet allocated to each IDF. The first floor IDF (IDF1) is the distribution layer. I'm doing eigrp stubs connected…
-
IPv6 Route Redistribution "include-connected"
I am seeing the strange behavior that is outlined here: Val(config)#: OSPFv3-EIGRPv6 redistribution. Strange "include-connected" behavior. Why does the include-connected command not seem to do what it should? Is this a known bug? Further research shows that many CCIE candidates have run into this as well. I still can't…
-
BGP Secuurity with bgp maxas-limit -viable?
-
Cisco Unified CM Administration
I am just fresh in voice... i just installed Cisco Unified CM Administration but i have problem with that installation my problem is Cisco Unified CM Administration web page is not lunched after i type the ip address in the web browser after i use to type the ip address the following message it use to come instead of ”…
-
How much is the diff between old CCSP and new CCNA Security
I want to prepare for CCNP security. As it is new so there no video tutorials for new series. I have the Video Tut for OLD CCSP. SO i want to know that how much is the difference between the two. can i prepare for new exams with old video tutorials Thanks
-
Does Palo Alto Networks have any effect on CCNP Security?
I have been reading up on Palo Alto Networks "next generation" firewalls and these guys are gaining some serious traction and positive reviews. 4 years in the market and they got close to 4k customers already. Their products are NSS Labs approved and is running on government networks. Cisco ASA's is stateful firewall among…
-
Ccnp tshoot
Hey, guys I'll be sitting down for my TSHOOT hopefully this weekend and giving it a go. I've read the Official Cert Guide just as a refresher and watching CBT Nuggets. other than that do you guys have any recommendations i can do to build up some more confidence or tips on materials i can use to better understand the…
-
Passed SWITCH 2nd time round
Passed SWITCH yesterday the 2nd time round but it was hairy. PC froze on Q43 with 27 minutes on the clock just as I was finishing a huge config. The staff were able to stop the clock after 7 minutes passed and moved me to a new machine but the config was lost so smoke was coming off my fingers trying to re config i had 5…
-
IBGP not getting EBGP routes (nevermind)
Whew. These BGP labs are rough; but that's how we learn. I think I'm starting to get the hang of the basics; my current lab is redistributing nicely and EBGP is working well across a frame-relay (admittedly the easiest type), but for some reason my IBGP isn't working and I can't seem to figure out why. I'm going to flip…
-
Bad IOS Image? SOLVED!
hey guys, thought i'd ask some guys who have some little more routing expericen than i do. I assume I have the wrong IOS image or type but i wanted to confirm this before i go on a witch hunt looking for it. I am trying to configure via GNS3 a frame relay multipoint cmd....thing is, when I type it in the cmd in it doesnt…
-
Route - Passed!
Hey, I took my Route today 9/2/2011 and am glad to say I passed with a 930 out of 1000. Last week I took it and failed with a 630/1000. I immediately went home and studied all of the sims and other material that I thought I did incorrectly. Fortunately I got the same sims and material and passed today with flying colors. I…
-
rebootin ASA with multiple contexts
hey guys...I think I can just run the reload command in the system context but I just want to make sure that the the other virtual contexts and configurations will start after I reboot the ASA 5510. It is production and has been up 280 days I think I need to do a reboot. just want to make sure this is all I have to do.…
-
questions regarding Cisco StackWise
I have a following Cisco StackWise setup:Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 28 WS-C3750G-24TS-1U 12.2(53)SE1 C3750-IPBASEK9-M 2 28 WS-C3750G-24TS-1U 12.2(53)SE1 C3750-IPBASEK9-M 3 12 WS-C3750G-12S 12.2(53)SE1 C3750-IPBASEK9-M As you can see, switch 1 is selected as a stack…
-
CCNP - Route
I skimmed through the FAQ's, and from the looks of it some of the study recommendations are a bit dated. What would be the current recommended books to purchase for the 642-902? Thanks in advance!
-
Aggregate to a specific peer
Hey all, Quick question, how can I send an aggregate to only 1 specific peer? I don't have any of my books handy and searching the internet hasn't yeilded any results. Any hints will be greatly appreciated.
-
" the specified phone number does not answer"
I have unity 4.2 setup to provide voicemail for 2 phones I have in my lab, it seems to me Unity cannot talk to the callmanager but the callamanger can talk to the Unity???? Whats going on? Voicemail are routed to the Unity box but Unity cannot send any signal like MWI and cannot also call an extention.... This is the error…
-
CCNP:SWITCH - Done
Hey everyone! I am a long time member here, but after I got my CCNA in 2007, which launched my career, I became more of a lurker just checking in here and there for updates and tips. However, with my 3 year anniversary ( CCNA:S in 2008 ) coming up and the renewal emails coming in from Cisco, it was time to renew... If you…
-
802.1x Issue with some clients.
We have been rolling out dot1x and have hit a couple small snags. We have some users, that once their port is configured they have issues finding the domain controller. In these cases it appears that the network adapter on these PC's still has a red X until after the Error message about being unable to locate a logon…
-
CCIP campaign begins
So, after many arguments with myself I've decided to forget about the CCDA/DP path for a while and go for the CCIP instead. i took a look at the material for CCDP and thought 'can I really face being this bored??' I plan to start with BGP, then MPLS then QOS - seems to be the most common route I've seen in theses forums.…
-
Loose source routing
Can someone gIve me am example of using loose source routing? I am just not getting this at all..,
-
type3 LSA and ABR with multiple areas
this is slightly confusing me I try my best to explain things as clear as possible without attaching complex pictures of the topology but this one is slightly complex. so the situation is this on R2 where the big red arrow is. there is an ABR which has interfaces connected to area 0 area 1 and area 2. The network to focus…
-
asa5505 configure NAT
Guys, I need to configure NAT on a ASA5505 to only nat the .4.0 ip address range. would the command be nat (inside) 1 192.168.4.0 255.255.255.0 or would it be nat (inside) 1 192.168.4.0 0.0.0.255 Thanks
-
HOw can i practice labs for SWITCH exam
I have just cleared ROUTE exam and for labs i used GNS. I prepared totally from home so i don't have any real routers and switches. Now how can i practice SWICTH labs without real switches. Did anyone cleared SWITCH without working on real SWITCHES
-
CCNP Voice - CAPPS 642-467
Anyone have the story on CAPPS 642-467? I'm preparing for it, but not sure how. There's no book. I just completed CIPT2 (8.0) and it was the same problem, but I read CIPT2 6.0 cover to cover and read as much as I could find on SAF/CCD for the pass. Completed: CIPT1 (6.0) - April 2009 CVOICE (6.0) - April 2011 CIPT (8.0) -…
-
asa5505 can't ping both ways.
Guys I have a lab running which has a host connected to the 2.1 range but I'm not able to ping my outside interface. I understand that the asa blocks ping both ways but surely I would be able to ping my default gateway of the asa which is 10.0.0.1. ASA Version 8.0(3) ! hostname ASA-New-York enable password 8Ry2YjIyt7RRXU24…
-
Learning IOS XR
Hey guys, Santy has came early and brought me some ASRs to play with :) Now, ive never touched/looked into IOS XR to date but are now going to have to make that dive. From what ive looked at so far, its very JunOS like. Anyway, my question is to those out there who use XR is what are the resources you've used to learn the…
-
EIGRP Null 0??
I'm having a hard time understanding this Null 0 concept and why it's there. For example, R1 is connected to R2 through 172.16.1.0/24 and auto-summary is enabled * R1 has the 172.16.5.0/24 and 172.16.6.0/24 behind it * When R1 advertise these networks to R2, a summary route of 172.16.0.0/16 to Null 0 is also added to R2's…
-
Setting up a terminal server
Group, I know this might have been asked a million times or even zillion times. I have searched extensively but I still feel I am missing something. Here's my situation: I am trying to connect a new box "A" to the terminal server ( C2610xm) , I verified there is a cable connected between the terminal server and my box "A".…
-
USB ports in Firewalls
Guys, What are the usb ports used for on a asa5505, i'm able to connect a wireless point to it?
-
Ipsec ha
Does anyone here have any experience with IPSEC HA on ASAs?
-
ASA 5505 for study practice?
I've sadly had little to no exposure to ASA devices and I want to. I'm going for CCNP-Sec once I finish up CCDP which should be fairly soon. Would the ASA 5505 be useful to study with? How different is it from enterprise versions? I would get it with the AIP SSC-5 to have as much functionality as possible but that's over a…
-
ROUTE 642-902 E-book for $9.99!
Cisco Press: Source for Cisco Technology, CCNA, CCNP, CCIE Self-Study Edit: note that this is only the daily deal for this particular book. Be careful with attempting to combine this with other offers, because if you try punching in the coupon code for their current sale, it'll calculate 50% off the original price of the…
-
VRRP Authentication
So this is nit-picking here - but I just got hit with a Boson question that has me thinking.... The question was a drag and drop and it asked which First Hop Redundancy Protocols supported Authentication. The question I have should I go into the test thinking that VRRP refers to the earlier RFC 2338 or the later RFC 3768?…
-
TShoot Materials
Hey Folks. What materials have worked for some of you for preparing for tshoot? It just seems like this exam is not as difficult as BSCI or SWITCH. How much time have some of you spent preparing? I don't want to over prepare since I have so much trouble finding time, but I would hate to fail. I have real world experience…
-
Layer 3 network design
Hello there, I hope I am asking this question in the right place... Anyway I am designing a new network for my first time and I will be designing it as attached using the Layer 3 model. However, i have a few questions that I hope you can help me with as I cant quite fully understand it.... Question 1: What is the reasoning…
-
Site to Site VPN Dynamic IP
Guys, I have two asa5505 and would like to set up a site to site vpn but both sites have a dynamic ip address with a lease of 6 days. Is it possible to set up a vpn using dynamic ip address, if not I can run a dns service which update the ip address but then is it possible to create a tunnel with a hostname? I've just…
-
Failed SWITCH
Well failed SWITCH this afternoon by 20 marks and I thought I was ready was 3 long tough labs and I needed all my time but still failed though I suppose at least I know where I need to scrub up for next time......
-
ASA 5505 – Tunnel Keepalive?
Is there an easy way to keep an ipsec-L2L VPN tunnel up while there is no interesting traffic? I have an ASA 5505 setup for backup internet/LAN VPN access in event that the MPLS network is down (which has been a big issue in this location!) – IP SLA tracking is setup to change routes in the event of a failure and it works…
-
MPLS: CE routers get other CE routes, but they're unreachable.
Good Evening TE, I'm having an issue that I can't figure out for the life of me. I just started getting into the MPLS track, and this is really the first bump in the road that I've hit. Basically what's happening is that I receive routes across the L3VPN link, but they're pointing to the loopback interface of the PE…
-
ScanSafe offering?
Was just forwarded (by my manager) this page from Cisco: Cisco ScanSafe Cloud Web Security - Products & Services - Cisco Systems Looks like Cisco bought ScanSafe and added their services. Looks interesting... send everything outbound, and redirect all remote access / vpn, to the ScanSafe cloud, for them to analyze the…
-
CCNP Lab
I'm trying to figure out what I need to add to my CCNA lab for my CCNP studies. I know several people say to use GNS3, but I prefer as much real equipment. What I have: AS2511-RJ access server 2514 2 x 2501 2650xm 2620xm 2610 (frame relay) 3640 3 x 2950 I know I need to get get 2 x 3550 switches. I might be able to get 2 x…
-
Me, Myself and SWITCH
Received my FLG SWITCH text today. I have to say, this is the smallest certification textbook I have seen. I kind of want to sit down and not get up till reading is finished. But...my fiancee wouldn't like that too much.
-
Error trying to get results from Cisco practice examns
Hello, everytime when I finish the practice examns from cisco (https://learningnetwork.cisco.com/community/certifications/ccnp/route?tab=3) and press submit to see my results, I get this annoying 'error' "%PdcCustomedResult%" instead of my answers. I tried like 3 browsers and all give the same problem, quite annoying to be…
-
route or switch
which on to engage first? tended for switch but i since i got gns 3 up and running i kinda think of routing might be the better start ... recaputured all the ccna stuff in gns 3 and it felt really good digging deep with tose routers ... so any suggestions?
-
what is this output?
stupid question but does this mean 7 weeks and 0 days? I mean looks like it but I have no idea what it would be used for? thanks
-
Switch passed
Well I just passed my SWITCH exam by a few points over passing score. I randomly decided to take the exam and see where I stand. Went in with out doing practice questions. Did a few labs here and there but very little. I felt the SWITCH topics to be very intuitive. Going in the exam I knew the multiple choice questions…
-
GNS3 TSHOOT topology
Has anyone built the TSHOOT topology in GNS3? I saw a thread a while ago about a hybrid with real switches, but nothing about a full topo. I'm looking over the topology and what equipment would be required and to upgrade my rack to built this out would be pricey. I guess my real question is, if I use the 3640 with the…
-
CCNP ROUTE - OCG needed?
I'm starting ROUTE and was curious if anyone used the OCG in combination with the FLG, or does you think the FLG is enough? I currently have: CBT Nuggets INE FLG Since ROUTE is divided into 4 major sections (EIGRP/OSPF/BGP/IPv6) in CBT/INE/FLG, rather than watching the entire CBT/INE series then diving into the FLG, I…
-
INE videos
hey guys I have been looking into the CCSP course and I can tell you CBt nuggest Mike S. course is okay but I didn't think it was very good. What do you think of INE.COM course. I watched their demos and they are very wordy and seems like a bunch of slides to watch..I want labs hands on maybe I didn't watch them log into…
-
MPLS: CE routers get other CE routes, but they're unreachable.
-
My ROUTE progress
In late July, I boldly(stupidly) said I would try to knock out CCNP ROUTE in a month. That would put me at testing about now, late August. Yea... about that.. lol. I declared this right after completing my CCNA July 15th, so I guess I was thinking I could take on the world. And to be honest though, I knew that this goal…
-
Interview Question for Network Engineer Job (Routing & switching)
I was interviewed last week and I received a job offer and I would like to share the question that I was asked. Remember this job was only for routing and switching technologies, no security or other thechnologies. Interview Question for Network Engineer Job Switch to Switch Connectivity 1. Name the VTP Modes? 2. How can…
-
Question regarding Ipv6 router advertisment
is it possible to configure an IPv6 interface to advertise its prefix WITHOUT sending a default route along with it?
-
Password recovery
I'm having trouble locating the information I need to do a password recovery on this Cisco 1841 router. I know neither the username nor password. All sites I see assume that I can get to the Router> prompt, which I cannot. Right off it asks for my username, which I don't know, and I'm sure the password request will follow.…
-
Voice VLans... Trunk and access mode
Hey guys.. We have got some 2950s and 3500s switches which have got IP phones plugged in and are working fine. Ports are currently configured as trunks and voice traffic has been put into the separate voice vlan 222.. IP phones and the end PCs are correctly picking up their associated VLans.. I have just tried to put the…
-
VTP prunning
OK so i understand pruning and how it works and all. But is there any way to see it working ? I have 3 switches connected in a ring, SW1, SW2 and SW3. they are all in the same VTP domain and that's working fine. I set up VLAN 300 on one of the switches and this was replicated to all other switches. I then turned on VTP…
-
Save 30% on CCNP Study Material -or- Register to Win Free Exam or 3 CCNP Texts
Thought I would share... Register to the right of this webpage for raffle...no purchase necessary. Or use 'CCNP30' for 30% off purchase. Cisco Press CCNP Routing & Switching Sale
-
CCNP Study
Hey guys, Is there a forum where we can look for study partners or something during my off hours i usually study for cisco certs but it gets boring doing it alone or doing labs by myself. Currently about to take the SWITCH (passed ROUTE). and will be moving towards TSHOOT. Anyone near taking switch?
-
should know this but...
hey guys. I have always had a vague view of these two configs: ip default-gateway "is this used for mana gment vlan purposes for access?" ip default-network "this used for routing purposes? and the "ip route 0.0.0.0 0.0.0.0 A.B.C.D(gateway)" if all fails gateway. any good materials on these..they are just vague to me…