-
GNS3 Windows 10
Does anyone know how to successfully setup a breakout switch so you can setup 802.1q tagging on Windows 10?
-
Odom + Lammle for ICND2v3 required?
I've noticed a lot of people complaining about the ICND2v3 on /r/ccna with a lot resorting to requiring the addition of Lammle in addition to the OCG. With a few weeks to go until my ICND2 I'm now worried that Odom's book has underprepared me even though it was perfectly adequate for ICND1. What are people's thoughts on…
-
Show IP route
Hi folks, This is a subnetting question relating to the show ip route command I'm on page 359 of the chapter IP Routing of Todd Lamme's book CCENT INCD1 Study Guide 100-105 I know quite a bit (sorry, no pun intended) about subnetting but there's always a question that can stump me when the subnetting question comes from a…
-
CCNA 200-105 Designated Forwarding Ports
Hello, I have found a discrepancy between Lammle's 200-105 Study Guide and the Boson practice exam literature regarding STP. After the root-bridge and root ports have been determined for a network, any segments that are left without port designations should have one end placed into designated forwarding state and the other…
-
Current CCNA Exams
All, Please can somebody confirm that 100-105 ICND1 and 200-105 ICND2 are the current CCNA Exams to be taken please? Carl
-
RAI detected
I am configuring frame relay in my home lab and now it's constantly spitting out these messages on my of my routers, any help? *Mar 8 02:23:31.439: %LINK-3-UPDOWN: Interface Serial0/1/0:0, changed state to up *Mar 8 02:23:32.439: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:0, changed state to up *Mar 8…
-
200-105 SNMPv2 and SNMPv3
Hello, Lammle's book only covers configuration of SNMPv1, but the objectives show SNMPv2 and SNMPv3. The Boson practice exams are hitting me with questions on SNMPv2/v3 with content that is not in Lammle's book. He only covers 1 1/2 pages on SNMPv1. Is it safe to say that I should study v2 and v3 in depth? I have a time…
-
Final exam Questions?
Hi In the final exam: Will the questions be exactly word by word the ones I answered in the chapter tests or can the there new questions?
-
How to Lab CCNA Data Center?
I have a lot of Nexus at work and now that Wendell Odom's CCNA book is available, I think i might want to get the CCNA DC by the year's end.. or at least pass the 1st half. Nexus equipment seems very expensive. I'm wondering, does anyone has any suggestions for how to lab for the exam from home?
-
Vlans
I have two servers on the same subnet that I am trying to access. One VM on my PC and a separate VM on a physical server. How would I access these at the same time? If I put them in separate VLANs then the client on my PC wont be able to talk to the physical server? PLZZZZZZ HELPPPPPPPP
-
Duplicate of passed courses certifications
Hello, back in 2012/2013 I've completed Cisco CCNA Routing and Switching course, but I've lost my paper version of certification and letters. Today I logged on NetAcad website to check if there is any way to download those confirmations, but haven't found any. Do anyone know if there is any way to get duplications(pdf…
-
DHCP Help
Basically what I've done is configured all of my DHCP pools on R1, one for 192.168.1.0, 192.168.2.0 and one for 192.168.3.0. The routers are interconnected with OSPF and each of the routers FA 0/0 port has an address of 192.168.x.1. The problem that I'm running into is the fact that all of the switches are receiving and…
-
Lazaro (Laz) Diaz
What is the communities thoughts on CCNA instructor Laz Diaz? I am familiar with Chris Bryant and Jeremy from CBT Nuggets. Never heard of this guy.
-
Static routes
Everything I have read says that using the next hop or a exit interface is functionally the same. Nobody every seems to explain why I should choose one over the other.
-
Shamefully admitting a problem that I shouldn't have. packet-tracer flow directions
Hey all I have a problem when using the CLI packet-tracer.... I cannot get my head wrapped around the "input" interface. I always end up with a huge question mark over my head trying to decided which direction I should be testing from and end up guessing some times. So for example: Interfaces: inside 192.168.1.0 outside…
-
For those who homelab without using Sims like Boson & NetSim, what's your game plan?
I currently do most of my labbing through using CPT, NetSim & Boson. I have some physical gear but I generally only use that when what I'm trying to do isn't possible on the Sims. I'd like to start using my gear more because I feel I'm starting to become a little too detached from the reality of setting up the equipment…
-
CCNA Security, What are your sources?
Hello all, I am proud to say that I was able to pass my ICND2 exam yesterday, which I definitely felt was not an easy thing. The materials I used included a cisco week course with QA and the Wendell Odom book. Strangely I found the Cisco Course which included access to the learning materials on the Cisco Learning Space…
-
Exam 210-260 - CCP used?
Can anyone confirm or deny the use of CCP in the latest revision of the exams? The certification guide references it but I do not see anything referring to it in the exam description. Has anyone come across it in their testing? I'm a LONG time Cisco cert holder and NEVER use the GUI to configure. Wondering if I need to…
-
signed up for lazaro dia's course for ccna on udemy
this course seems to have a lot of good info about ccna. lazaro uses packet tracer and gns3 for his labs. udemy has special promotions today is the llast day at least for awhile to get this course for nineteen dollars
-
EIGRP Metric Calculation on ICND2
Just wondering the opinion of others on whether it would be likely or not that the exam would ask to calculate the metric. I understand the parameters of it but do I really need to have it down to be able to calculate this on the spot. I am automatically assuming they won't ask to calculate with K values as Cisco doesn't…
-
General Subnetting question
I'm working through a tutorial (video). The tutorial has gone through a few subnetting examples and I feel I get it. I know binary numbers, etc. rather well. OK the question was:divide 20.0.0.0/8 into 500 networks.I get that the new subnet mask will be /17 as 9 bits will be needed for the subnets (2^9 is 512).BUT…
-
7 CCNA CCNP Study Tips for the New Year - 2017!!
I found this video on YouTube and thought it was a practical and helpful list of study tips. Below is the link if you want to check it out. https://www.youtube.com/watch?v=dfEWw95coak
-
Ping through ASA
Having issue ping through ASA. It real equipment using version 9.1 of the software. From the ASA I can ping the PC and router and from both the PC and Router I can ping the ASA. I'm missing something but I can't see it right now. Thanks for the help. ciscoasa# sh route C 10.0.0.0 255.255.255.0 is directly connected,…
-
Subnetting: Accommodate more than 225 hosts
Hi, I have a subnetting question. First I’ll give an example: An organization has the IP 200.1.1.0 and needs 4 subnets with the following characteristics: Subnet A =>72 hosts Subnet B => 35 hosts Subnet C => 20 hosts Subnet D => 18 hosts Provide the IPs per subnet. Solution Subnet A =72 host For 72 hosts we need 2^7 - 2 =…
-
OSPF DR BDR Multi-Access question
R1 , R2 , R3 , R4, R5 are all connected to the same VLAN, Same Subnet of 192.168.3.0/24 (Multi-Access). All in the same Area, running OSPF. R1 is DR and R2 is the BDR. R3 has a directly connected network behind him 192.168.1.0 directly connected with interface ip address 192.168.1.1 . What happens when R3's directly…
-
OSPF Area Design Advantages
In the Cisco Press book 200-105 Wendell Odom speaks of advantages of OSPF Area Designs. In one of the bulletins he says - Changes in the network (for example, links failing and recovering) require SPF calculations only on routers connected to the area where the link changed state, reducing the number of routers that must…
-
CCNA Books
Hi, Just trying to purchase a book so I can study the CCNA in 2 parts so looking for book 1. What is the best most current book of choice I am finding other books of same name but different exam number, 640-822 ?? and 100-101 ?? So what book should I be buying Any help much appreciated, Thanks Lee
-
Basic CPT Labs
I've a few basic CPT Lab files compiled from exam practice questions and I'm wondering if anyone here (well, people new to CCENT/CCNA, anyway) would find them of use? I've put together a sample web page, with just one example of the kind of thing I mean. Link URL="http://rob42.net/test_lab.htm"]Rob42.net - Test Lab[/URL…
-
Techexam's CCENT/CCNA Helpdesk
I've been thinking over the last fews days about an idea to help everyone with their CCENT/CCNA studies but with a little twist. My idea would be for people to create Packet Tracer labs and share them in a Helpdesk style manner. You would build a lab environment which can be anything from simple to complex and tag it as…
-
Failed ICND2 with a 790
The following is the breakdown LAN switching technologies - 75% Routing Technologies - 76% WAN Technologies - 80% Infrastructure Services - 75% Infrastructure Maintenance - 33%
-
200-015 ICND2 vs 210-260 IINS
I meant 200-105* Which one is easier? I'm thinking of going directly for IINS because we don't really utilize internal routing protocols at work. We are implementing a lot of ASAs though. I figured I'll go straight for IINS first vs getting my ICND2. What do you guys think? Thanks!
-
OSPF Area Design Advantages
In the Cisco Press book 200-105 Wendell Odom speaks of advantages of OSPF Area Designs. In one of the bulletins he says - Changes in the network (for example, links failing and recovering) require SPF calculations only on routers connected to the area where the link changed state, reducing the number of routers that must…
-
Need advice please.CCENT 100-105
Hi all,new here So doing my CCENT in 2months and need advice on study material please. I have heard of techlabs which i'll start after at least reading the CCENT book,on that note which will be the correct book to read?Cause i'm finding quite a few different ones every time :/ So if anyone could assist me on how and what…
-
Two-tier Collapsed design help
I am currently studying for the CCENT and using a few different resources. I am a bit confused about the Cisco Two-Tier collapsed design. In Odom's ICND1 100-105 book, he explains the two-tier as a "collapsed core" therefore using only the access and distribution layers. On a couple practice exams, I keep getting this…
-
Best Source of Studying
Hi, Can anyone suggest the best source of studying for the CCNA 200-125 R & S exam? I did some research and found out the following: 1) CCNA Routing and Switching 200-125 Official Cert Guide Library 2) CCNA Routing and Switching 200-125 Official Cert Guide Library, Academic Edition 3) CCNA Routing and Switching Portable…
-
Looking for a good LAB
Im looking for a lab environment that I can freely config PC's to Routers. I would like a real world environment. I am willing to pay as long as it serves the purpose. This would be for CCNA purposes also post exam for practice. Thanks in advance
-
4000 UDP Portforwards; easier way
Hi all, I've been asked to put in a load of port forwards on a Cisco 1941 (15.0(1r) M16 image), and one of them is 4000 UDP portforwards for a PBX. I don't really want to write 4000 statements out. Is there a simpler way of achieving this? The router is the Internet facing router. I've done some good research this morning,…
-
Subnetting between routers and multiple VLANs
I have a subnetting problem. There is routerA connected to another routerB. RouterB then connects to SwitchA. SwitchA has 4 VLANs attached to it. VLAN 10 needs 1500 hosts VLAN 20 needs 500 hosts VLAN 30 needs 60 hosts VLAN 40 needs 30 hosts The starting network is 10.0.0.0/8 What would the serial interface address, subnet…
-
CCENT Study Schedule
Hi Guys, I was hoping if somebody could critique my study schedule and give me some advice. I have been on and off been studying for the CCENT exam now for the past 18 months or so, I would say I have covered about 70% of the material 3 to 4 times now but am now looking to seriously put my time and effort into getting the…
-
IPV6 Access List Question. ACL Not Blocking Every ICMP Echo Request.
Hello everyone, Studying for my CCNA and I have a quick question about IPV6 access lists. I have 3 routers connected with EIGRP routing enabled on interfaces used: [Router1] G0/0 < -> G0/0 [Router2] G0/1 < - > G0/1 (2001:A:B:31::2) [Router3] I created an access list on Router2 which is designed to block access from Router…
-
Subnets - 172.16.0.0/18 - why 4 subnets
Hi, I've come across this in the ICND1 CCNA book and can't work out why there are 4 subnets with 172.16.0.0 and 255.255.192.0. I understand there are 16 Network bits (Class B) and there are two subnet bits (x.x.192.0 - prefix /18 ?) but I can't work out why that equates to 4 subnets rather than 2. I see the explanation 2^2…
-
Researching answers to Cisco test questions.
It there any benefit to researching the answers to test questions I saw on my Cisco exam? I have no intention of sharing anything I remember from the exam, but what are the chances of seeing the same questions on future exams? I only remember a few, that stumped me, one of which I definitely know I got wrong.
-
Packet Tracer: Ping from computer to server
I have to send a ping from a computer that is connected to a switch to a router to another router and to a server computer>switch 1>router A>router B >serverA I can ping up to router B, but after that, all the packets are dropped. What's wrong? Preview attachment Topology.jpgTopology.jpg88 KB
-
Testing convergence and viewing results
Hi all, So I've designed two identical IPv6 topologies within GNS3 and implemented one with EIGRP and the other OSPF. I created a ping from R9 to R1 and then shutdown the s0/0 on R2. There is packet loss show on R9 and a delay of around 4/5 seconds. Is there a better way to view that convergence time by show commands or…
-
Passed ICND 1 : ) How do i see score card?
Hi, just managed to pass the ICND 1 exam. However the printer was broken at the test centre and i accidentally clicked end exam to go to the survey rather than next to view score. I logged into the Pearson VUE website and it says 'Pass', but that's all. Out of curiosity i'd like to be able to find my score and category…
-
CCNA practice exam
I am preparing for my CCNA exam but I don't have materials to practice the test questions. Is there any recommendation for a link to access free practice test?
-
Broadcast in Intervlan communication
Hi All, New to this forum. Im preparing for my CCNA studies and i did attend couple of interviews and stuck with a question that "if there is a switch which has vlan 1 and vlan2 , By default there is 2 broadcast domain. and broadcast from one vlan cannot passed to another. But if we connect a Router to the switch and…
-
Study materials
I am looking at the Routing and Switching Essentials v6 Labs & Study Guide by By Cisco Networking Academy, Allan Johnson for lab practice. Has anybody used this? Thanks
-
ICND1 Vs ICND2
Hi I recently just completed ICND1, and im wondering whats some great study material for ICND2? I'm already feeling the weight of ICND2 and the pressure much more than ICND1.
-
CCDA exam in 8 Days
So I have 8 Days to Study for and Pass CCDA, so far I have gone through 6 videos of the INE's Bootcamp for the previous version of the exam.I have gone through Design Methodologies in the OCG, and my feeling about the OCG is that there might just be too much info that I might not need for the exam. I have never done design…
-
When would a v.35 cable be used?
Hi, Sorry to ask such a basic question but I am wondering when a v.35 cable would be used? this came up in a practice question I encountered recently, if I recall correctly the answer was that a v.35 cable was plugged in between two routers and this was the reason they could not communicate. Thanks
-
The frustrations of using Simulators
Just spent the last hour troubleshooting a Boson NetSim Lab that wasn't working. Ended up being the simulator was designed to handle the commands in a certain way otherwise it would break the configuration. Changing EIGRP network statements form network 192.168.1.0network 192.168.100.0 to network 192.168.0.0 0.0.255.255 If…
-
suggestions for home lab when studying for the ccda
Do any of you use a lab while studying for your ccda? I was thinking that a home lab isn't really necessary. What do you guys think? Thanks
-
how to find out the subnetmask for each interfaces for a router ?
how to find out the subnetmask for each interfaces for a router ? is there such a cisco command ?
-
Route summarization
I am trying to summarize two networks and create a static route. The networks are 172.16.3.0 /24 and 172.16.4.0/24 i summarized them as 172.16.3.0/23. But it when I try to create the static route I get an error. iP route 172.16.3.0 255.255.254.0 201.10.4.9 i get an Inconsistent address and mask error. I can create…
-
Going for CCNA:Sec!
I finally have enough free time to tackle this beast! This is my first "progress" thread, so go easy on me! I'm going to try to approach this test the same way that I approached the ICND1, which is to go through the material twice. First pass I'm just going to write down questions with little notes, second pass will be…
-
how do you connect an enddevice with a router ?
how do you connect an enddevice with a router in packet tracer ? I tried both copper and straigth through . both wires did not work. I wish there was a way i could attach images.
-
CCNA Data Center
Hi Everyone, I am planning to take CCNA DC exam .. I am working as a Functional tester in an reputed MNC for last 2 years, but somehow I am not satisfied with what I am doing so I need a change. so can any one help out with my question that how can I clear this exam?is it very tough to pass CCNA DC? . shall i join some…
-
How can I practice CISCO commands?
Hey guys, I'm studying CCNA R&S myself as a hobby. I'm wondering if there is any way to practice CISCO commands without CISCO gear. So far, I've learnt basic commands like enabling telnet access and enabling SSH access. I'm watching tutorials but as you may know, just watching videos are not helpful for getting…
-
Which to take CCENT or CCNA
I've been studying my butt off the last two months for the CCENT and took the exam on Thursday, Feb. 16 and failed. I got a 755, three of the questions struck me as really off the wall questions. Anyway I was wondering if I would be better off studying for the full exam before attempting it again, instead of attempting the…
-
Finally passed ICND2!
First attempt was 801/811. Second attempt 930/811. I spent a month studying for the resit because of how difficult it was the first time. I found the Offical Cert Guide to be the most informative resource, it doesn't have 100% coverage of whats in the exam but its very close. I also used Todd Lammle's book, Kevin…
-
Preparing for the CCENT, any words of wisdom or advice?
So after working several years within the IT landscape, I've decided to get started on my cert path for 2017. The FIRST cert that I am focusing on for this year is the CCENT. I've had courses in college in regards to Cisco and have had some hands-on experience with the different devices they offer. It's been at least 5…
-
CCNA Security vs CCNA Cyber Ops
Thoughts on this new cert path Cisco is introducing, and how it affects the CCNA Security. There seems to be a lot of overlap between course topics. Wondering what they are going after with the two paths, and how that affects the value of one or the other.
-
CCNP wireless
How do you study for this if there is no books published?
-
studying for ccent
hi all just wondering what a BETTER way to study for the ccent test would be? Im busting my rear scouring the cisco official cert guide for 100-101.....then taking pearson vue ccent practice exam tests that allegedly go with the book and im getting killed. Assuming im not a moron, any suggestions?
-
ICND1 100 - 105 Help
Hello Everyone, New to this forum, I am planning to give the ICND1 exam in the next couple of weeks and was wondering where I can get practice questions that will best prepare me for the exam. I did give the CCNA exam last year and failed with 750 and I dont want to risk it again. Thanks
-
PAT dynamic questions
hi I hope someone could help me. I configured PAT Dynamic on both side of networks, when ping I can reach the destination from both side...but the packet cannot come back (view from simulation mode). Anything missing in my configurations? Thanks. hostname inside-router-1 ! ! ! ! ! ! ! ! no ip cef no ipv6 cef ! ! ! !…
-
CCNA R & S looking for advise
hi there, I got my comptia S+ 3 weeks ago. now I'm planning to go through CCNA. With Comptia there were 2 possibilities to take the exam (in case you don't pass the first time). QUESTIONS 1. Does anybody know if Cisco CCNA has that bundle option too or you have to pay again if failed? 2. Does anybody know a good book to…
-
Passed ICND1 100-105 today :D 927
Special thanks to the community on here for helping me with my questions and quickly providing me with clear and concise answers. THANKYOU ALL :D :D :D
-
Track Rank
What order would you rank each track in terms of value? Not based off of some graph but your own opinion from working
-
NAT questions
If there 2 directly connected routers Inside network, do we need to configure NAT on both routers or only one? If so how should NAT be configured Inside for s0/1/0 on both routers ?Thanks.
-
Async 16A card in 2620XM Router
Hi all, installed the NM-16A in my 2620xm router and has crashed. so was wondering what IOS people uses? here is the summery from the console screen 00:00:10 UTC Fri Mar 1 2002: Unexpected exception to CPU: vector 100, PC = 0x8021E2A4, LR = 0x8021E280 -Traceback= 0x8021E2A4 0x8021E280 0x80223B20 0x8021E594 0x801B4DA8…
-
Cdp
What could be the cause of my phones not showing up in cdp on my routers but they do on my switch? I have three routers all connected into one switch (with vlans trunked to the switch) and six phones in three separate vlans off of that switch
-
PAT dynamic
hi, I am creating PAT dynamic on a router. Could any one tell me if the public addresses Prefix in the pool must match the prefix (/30) of the global inside address? example /24 in the pool and /30 for global inside ? thanks.
-
CCNA Fast Lane Training
Hi all Has anyone used Fastlane training www.flane.co.uk, I'm thinking of doing CCNA with them, the lady I am dealing with gives a good impression of the company and their website\data center labs certainly look good but I wondered if anyone has come accross them and can share any experiences good or bad. Many thanks
-
Possible error in 200-125 Sybex book.
I was running through all the chapters last night and taking the quizzes at the end. I came to the subnetting portion and got stumped. The question is: The network address of 172.16.0.0/19 provides how many subnets and hosts? The way I work this out is the following: The next boundary is 24. So 24-19 = 5. 2^5=32. That's…
-
STP Question
Based on the excerpt attached, Am I correct in saying that this is alluding to all devices in an STP topology will perform a listening process for 15 seconds and timeout their MAC table entries across the entire topology? I'm struggling to get PT to simulate this scenario. MAC table entries are not timing out as expected.…
-
EIGRP AD question
Hi I am new, 1. Could anyone tell me if it possible to change the Administrative Distance of a specific EIGRP route ? I found this but is for all routes at once? : Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router eigrp 111 Router(config-route)#network 192.168.16.0…
-
Taking classes at a Training partner
Has anyone had any experience studying for (and passing) the ICND1&2 v3.0 by taking classes at an official Cisco Learning Partner? 6 months ago I took them, but since I have never taken any exam, I'm not sure how well prepared I am. Don't get me wrong, I am satisfied of the instructor and the course overall, we were…
-
Frame relay inactive
I configured FR and two interfaces are active while two are inactive. I don't know what the problem is, can someone please help? R4#sh frame-relay route Input Intf Input Dlci Output Intf Output Dlci Status Serial0/1/0:0 102 Serial0/1/1:0 201 inactive Serial0/1/0:0 103 Serial0/3/0:0 301 active Serial0/1/1:0 201…
-
Cybrary CCNA
Good morning all, I see that Cybrary has a CCNA course. Have any of you sat through those videos and study material? I thought their CISSP videos were very good so I'm wondering if the CCNA material will be as good. Have a great day!
-
Summarize routes
hi, I am new. Could any one tell me if is possible to summarize the following routes? : 172.30.0.0/26 172.30.0.64/26 172.30.0.128/26 172.30.0.192/26 172.20.0.0/27 172.20.0.32/27 172.20.0.64/27 172.20.0.96/27
-
Frame relay
Hello all, I tried configuring a frame relay from my branch network to my HQ but it seemed not to work maybe I got something wrong. Below is the question, if anyone can help me with ideas on how to solve this. Question: * Configure your Frame Relay Serial Port to route between your branch and the corporate devices (Use…
-
Access list
This is my fist time posting here, and I feel my question can help others. So I have a practical where I need to allow only host on my ADMIN VLAN to SSH to my router. How do I configure this?
-
Anyone taken ICND1v2 and ICND1v3?
I'm wondering if anyone has taken ICND1v2 and ICND1v3 and if they're similar. I got super close to passing ICND1v2 but not its v3 and I'm scared I'll fail lol. Has anyone taken both?
-
CCNA Security Exam Cram
I was just wondering if anyone hear has passed the CCNA security using the Exam Cram book? Or has anyone had the chance to compare the exam cram book to the Cisco Press book? Just wondering being the impulse shopper that I am I seen the Exam Cram book at the book store, but not the Cisco Press book so I went ahead and…
-
Percentage of IPV6 questions on ICND2 exam.
Amount of preparation needed for IPV6.
-
dhcp question
hi, I am new and i have a question about dhcp could anyone help: 1. Does a router know if it should not assign a broadcast address to a pc? or do we have to tell it to exclude when configuring DHCP? thanks. 2. how can I view the addresses I excluded in dhcp ?
-
IP Subnetting confusion subnet number incrases
Have an address 10.16.3.65/23 with a Network ID of 10.16.2.0. These are the tricky ones the ones that increase the subnet digit and not the host digit. You know what I mean all the easy ones they do on youtube.com where deal with subnets /25 and above But besides that this is the difficult part of subnetting crossing over…
-
Routers only know directly Connected ?
I keep hearing the phrase in videos that routers can only see as far as they're directly routes. Does that statement also refers to the fact that a router can only see as far as his "Next Hop IP, local router also ? As I understand that an IP packet must be forwarded to something the router "Knows about" .
-
Passed ICND1: A long time in the making.
Materials:* Packet Tracer (nearly exclusively) * CCENT/CCNA ICND1 100-105 Official Cert Guide (Wendell Odom's book) * ITPro.tv CCENT video series * ITPro.tv Free Labs * Transcender practice exams (Free with ITPro.tv) * Kevin Wallace's CCENT ICND1 100-105 Premium Edition Complete Video Course * Boson's Ex-Sim Max * Boson's…
-
EIGRP /Static routing questions
hi I am still new in networking. I have a few questions: 1. I want to configure EIGRP on this topology that already have static routes, Can I have both protocols on the same routers? 2. If yes how do I configure EIGRP as the main protocol? I tried setting my static routes AD to 91 ..but the EIGRP don't show on the routing…
-
Boson Testing
If I can pass the Boson practice exams with easy am I ready for the real thing. TIA
-
Advice For cramming - Just finished Cisco Academy CCNA Security
Just finished Cisco Academy CCNA Security, yet the depth of my retention of the material feels shallow. I completed all the labs except for the ones requiring ASDM, because packet tracer does not have ASDM. PLEASE give me some advice about what resources to use to prepare for the test.
-
Which format and when?
So the company offered to pay for training to get some Cisco certifications. I'm not new to networking or IT, but I've avoided doing infrastructure work for the most part so the Cisco specific protocols and IOS are new information to me. What I'm having trouble remembering is which format Cisco wants the network portion.…
-
'Network Fundamentals' & 'LAN Switching Fundamentals' topics
Hey all, I'm new to the forums here. Recently this week i failed my ICND 1 exam with a score of 813 My category scores were: Network Fundamentals-58% LAN Switching Fundamentals-63% Routing Fundamentals-80% Infrastructure Services-89% Infrastructure Maintenance-88% I realise i'm close to passing but those first two topics…
-
Kindlky correct my subnetting
Subnetting Example1 : 172.16.192.0/19 50 lans 70 users required. Next 5 lans and 10 users each is required. 1. 172.16.192.0 / 19 172.16.192.0 /19 =32 32 is Block Size 172.16.192- 224.0 192 to 224 is the network space available with block size 32 /19 = 2^3 = 8 Networks. Network : 172.16.192.0 Network number 172.16.192.1…
-
How are Cisco certification renewals handles?
Let's say I pass the CCNA exam and have valid CCNA for 3 years, then I get the CCNP a year later. Does that mean my CCNA is valid until the CCNP expires or before the 3 years are up for the CCNA, I can use the CCNP certification to renew my CCNA for another three years.
-
A good intro for networking book?
Hey guys Decieded to go for CCNA but I have no background at networking Can you reccomend a good book before I actully start studying for the CCNA? :) thanks alot
-
Looking to start studying for Wireless HSortly
Hi all, I have recently passed my CCNA in R&S and now looking to study CCNA in Wireless. I previously used INE vids and a couple of books for R&S. COuld anybody reccomed reading material please? I am not a fan of Sybex so ideally none of his books but willing to look into anything else. Thanks guys :)