-
CCNA New Version vs Old Version
Hi everyone, Just a quick question, If I pass the old CCNA v2.0 (before 20 August), will I be eligible to pass the CCNP in the next 3 years with that certification, or I'm gonna have to re-certify with the new one (v3.0) ! Thanks !
-
Scheduled the 210-260 for this Friday.
Going to find out exactly how well I can do this Friday 2/5. Wish me luck!
-
Difficulty while upgrading IOS - new flash drive - Cisco 2600
I recently upgraded my cisco 2600 router with 32MB flash. I downloaded 13.6 MB IOS (12.4 version) file in it; however, when I try to boot with it. It keeps giving me error saying memory exceeded. Any idea how to fix it or the problem ? rommon 5 > dir flash: File size Checksum File name 13650264 bytes (0xd0495 0x2fd2…
-
So, why did CBT Nuggets even bother to make a 210-260 Series?
I mean.. If you are going to refer the viewer to an additional 10-15 videos, and a large portion of the source videos are sub-4 minute videos that point you to older content? The video series is already 38 freaking videos long, and being directed to additional 10-15 videos which are 45+ minutes long? Geesh. Russ
-
Can you help me finish the bits for my CCNA lab please, bit confused.
Hello, thanks for all your help so far, can you help me finish the set up please? So far I am getting ; 3 x 3650TS Switches with power leads and rack mounts. 3 x 2811 Routers with power leads, ethernet cables, console cables and rack mounts. I will spec these with 512MB or 768MB memory and 256MB flash. IOS will be 15.1(4)…
-
switch options
Hello lads, I've been off this forum for a while now due to many circumstances. I have to say I'm really glad to be back.. :) I've been on and off work, which has kind of unfortunately not motivate me to study for anything. Things have since changed for the good I think, and I've been a junior system admin for my new/old…
-
Switch VLAN ACL Basic question
Created an ACL on a Switch and applied it to the VLAN Interface. I cannot filter traffic to the connected gateway router. PCSwitchRouter 192.168.1.3 192.168.1.10(VLAN 1) 192.168.1.1 I am able to filter traffic to the switch. ACL on Switch: access-list 101 deny tcp host 192.168.1.3 host 192.168.1.1 eq 22 access-list 101…
-
Best CCENT Video's available
Hey everyone. I'm preparing for my CCENT after passing my Network+ today (woot woot). Very tough exam for an "introductory" exam, and very broad. I got my Security+ earlier this year in March too. I just started a job at a NOC a couple weeks ago, and my boss has been very kind and would like me to focus the majority of…
-
200-101 Exam & Real Equipment
Has anyone here passed the 200-101 exam without using real equipment to prepare?
-
Connecting AS2511-RJ to my network
Hey everyone - I just bought an AS2511-RJ on eBay to use as an access server in my lab. Question: I notice that these routers don't have ethernet ports on them. How would I go about conencting this device to my network, so that I can get remote access? My ultimate goal is to get access over the internet, but access over…
-
Cables and modules for CCNA lab please.
Hello, I am going to put together a lab consisting of the following now that I know what i needed. 1 x 2801 (384/12 2 x 2811 (512/12 3 x 3560 I have the following questions i still need answers for please.. Can I get any 3560's? Someone said I should get the TS but they are a bit pricey. What modules do i need for the…
-
'Total networks' calculation
Hi, I'm currently reading thought the CCENT book but Im a bit confused over some information on chapter 12. Heres the info for class A B C networks: Can anyone explain to me why the 'Total networks' is using powers of 7? What happens to the extra bit? Thanks!
-
Job paths after CCNA
as title sates what jobs one could apply with having just ccna - as doing research,i know its limited a lot by locations wise landing entry junior engineer roles or any type of entry network jobs - since most companies look with people having few years experience and some other certs. So its obvious that having ccna isnt…
-
Cabling types in 200-125
Does anyone else think it's silly that even in the new objectives we have to differentiate straight-through, cross-over, etc? I work with some pretty old gear at work and I havnt needed a cross-over cable in like FOREVER. I guess they are just being thorough for people working with REALLY old equipment, but you would think…
-
ASA Configuration
Hey ,I Simple small Maquette to do Actuallys the LAN it's pinging to ASA but I can't ping to the Outside Interface ASA I have tride a lot of methods and ACLs and nothing works (Switch)>>>>(ASA)>>>>>>>>>>(Router) = = = = = = (LAN) (Web Server)
-
What IOS version on lab equipment?
I am about to buy a lab consisting of 3 x 2950 switch, 3 x 2610 router and 1 x 2520 frame relay. I have been told the frame relay IOS is 11.2 The router IOS is 2 x 12.2 and 1 x 11.3 Is this all OK for a lab set-up to study for CCNA or do I need IOS 15 on everything? Is there any way to get 15 and upgrade them? Do I need a…
-
CCNA in one month?
Started studying for ICND1 less than 2 weeks ago and going to take the exam next week. Will probably sit for the ICND2 by end of this month. I've been studying 10-12 hours/day. ICND1 doesn't seem too hard, but concerned about ICND2. Not sure if I'll get it done by the end of the month. Anyone else done both within a month…
-
Vlan routing
Hey friends, I take the CCENT on monday! In the meantime I was playing with packet tracer and tried to make a routed vlan but for some reason the port on the router is amber and when I do show ip interfaces brief the vlan is down/down even though the interface is not shutdown. I have trunking setup between the switch and…
-
Just sharing some info on study path I found
Just thought this would be good to share. Of course it depends on what you want to do and your background. https://m.youtube.com/watch?v=ZGuSMui3ohQ
-
Split horizon
Not so much a tech question, more of a why is it called 'split horizon' ? Should be called poison something or loop blah or w/e. I ask because I keep forgetting what it is because in my mind the name makes no sense.
-
CCNA new version ?
I have passed ICND1 100-101 , and I am studying for 200-101 . If I cant make it before the deadline , can I take 200-105 , or I have to retake both 100-105 and 200-105? Pls help me
-
Ccent revsmp
Can someone please help me I am bit co fused I have just started studying from Wendell odem icnd 1 100-101 book but i have just heard cisco has changed the ccent certification to icnd 1 100-105 do I need to buy the new book and start again
-
How Valueable is CCNA
I've been given some mixed answers with this one. I've been told that many many many opportunities would show up when I put CCNA on my resume, and I've also been told that a CCNA on my resume will pretty much get it thrown away. I would assume this depends on where I want to go, so to answer that, I'm trying to get an…
-
CCENT passed!
Hey fellow networkers! I got the official email stating I am CCENT certified!
-
CCNA v3 exam info released!!!!
First! CCNA Routing and Switching - Cisco
-
CCNA R/S lab set-up help PLEEEAAAASSSSSEEEEEE
Can someone please recommend the parts for a CCNA R/S lab please. I look on ebay but so many different model numbers and no one says what ios they have!! I am a total newbie when it comes to CCNA equipment but I want a lab, dont want to be a paper champion who has never used real equipment. Not looking for bare bones…
-
Doing 210-060 CICD but not the 065..
Hi all, I'm currently on university placement and trying to build a solid base of networking knowledge before I finish uni next year. I have my CCNA and CCSA certs and am planning on taking CICD 210-060 but after I've completed that I want to get back on with routing and switching and start my CCNP. My question is would it…
-
CCNA Voice Lab
http://www.ebay.com/itm/-/111989182766? I have a complete voice lab for sale. The only real big thing that it's missing is extension mobility. This has CUCM 7. With this version, you won't need a huge amount of RAM. 8 GB can run CUCM, Unity, and Presence. 16 GB should run everything. Ideally I'd like to sell this to…
-
Certification advice for aspiring network engineer
Hey guys, looking for some answers regarding career advice. I have experience troubleshooting small networks (soho and residential) and I'm looking to get a job troubleshooting and building smb and enterprise networks. The security aspect of network engineering is intriguing and the various security concepts I encountered…
-
Why can't 0' in the host portion of IP address be used for a host?
Why can't 0' in the host portion of IP address be used for a host?
-
Need help with home lab setup
Hey guys, so I'm wondering if someone can pinpoint the problem for me. I just recently started labbing as I study for the CCENT and I'm having trouble getting out to the internet via my Cisco 1841. I have the 1841 router and 2 switches (3550 and 3560). Here is the setup: Comcast Modem (wireless gateway) > 1841 > 3560 >…
-
CCENT test structure.
Hi guys, I'm about a week or so out from taking the test and I wondered how the test was structured. Mainly does it have sims like CompTIA did and if so was it like 3-4 or like 10 ? I don't want to know anything specific about the questions. Otherwise is it just a choose ABCD type test ? AGAIN DON'T VIOLATE THE NDA I DON'T…
-
Passed
CCENT passed!!!!!!!!!!!!!!!!!!!!!!!!! I didn't know that the scores were preliminary and that Cisco goes back to make sure your score is valid. I just thought once I passed the test I am now certified? Now I have to wait to here from Cisco if it's good?
-
How far down the CCNA R/S learning track am I with Network+??
Hello, I have been right through Keith Barker/Kevin Wallace Cert Guide for Network+ N10-006 and also through all the Professor Messer's Network+ training course online. I want to keep going forward now and study on for the CCNA R/S exam, not going to sit the Network+ exam as I feel it would be obsolete as soon as a pass…
-
What do you do to keep up with your CCNA knowledge if you don't use it everyday?
16 years ago I could take a Cisco router and configure it with very little reference. Due to my job requirement for the last decade, I have very little Cisco interface that needs to be managed/configure. They're usually set it and forget it. To be honest, I don't even remember how to properly console into a Cisco router…
-
Are VACL's part of ICND1 ?
Are VACL's part of ICND1 ?
-
Remote Access Cisco Home Lab
Sorry if this thread is misplaced. I have a Cisco 2610 w/a NM32A which is being used as a terminal server. I successfully mapped my other devices for reverse telnet, however when I began to unsuccessfully configure settings for ssh, I am no longer able to reverse telnet locally. An overview of my setup Cable Modem ->…
-
Default Gateway
Hi, if I use a dumb L2 switch (non cisco) in which I CANNOT do int vlan 1 description **default gateway** ip add 192.168.0.1 255.255.255.0 Ok. What should I do to set the default gateway on a dumb L2 switch in which you cant console it? Or will it flood to everyone else automatically? Besides in some cases the gateway must…
-
what it the best book for exam cram?
I just buy a exam cram "cisco ccent icnd1 100-101" by pearson it certification . and it suck. it have to much error and the question are not gear to pass the exam. it full off trick question.
-
CCNA + unrelated B.A.
Got my CCENT, bout to get my CCNA. I have a bachelors degree but it is in a completely unrelated field (psychology.) Does it matter that I even have a B.A.? How bad will that be when I start job hunting with a CCNA + unrelated B.A. + no job experience? Anyone else with a similar experience in starting out? Should I aim for…
-
Why Are Cisco Switches In 24 ports or 48 ports
Is there a reason? Why not 20 ports or 40 ports?
-
What To Use for Practice Exams?
A little background, I purchased the Cisco Press e-book which apparently doesn't include a download for the practice exams, not sure why...seems silly...but anyhoo. I am trying to find something that I can use to test my knowledge along the way and all I can seem to find via the Google machine are ****, apparently…
-
Failed CCNA Wireless (640-722)
I knew I was taking a big risk rushing it, but today was the last day to test the old version. I studied pretty much non-stop for 4 days...it wasn't enough by a long shot. I failed with a 647. I'm going to be much more methodical when I take the new version. I think I'll aim for March sometime. As other people have said,…
-
ASA for CCNA Security Lab/CCNP Security
What ASA is recommended for the CCNA Security and CCNP Security? I see a lot for the ASA 5505 for CCNA Security. Would the ASA 5506-X be enough for both certifications? What licenses should I look for?
-
Cisco Learning Labs (ICND2)
Hello All, I was wondering if anyone has any feedback on the Cisco Learning Lab product specifically for ICND2. priced at $79 for a 90-day period, which can honestly fit my budget. I currently have packet tracer and use that to get a feel for the ios, and build a couple custom labs, but I don't really feel that strong in…
-
Valid Host IP Address?
Hi there. Rookie here, just wondering how to know if an IP Address is a valid Host Address or not, and why they are valid (or invalid). I have a list of IP Addresses with different Subnet Masks that I've turned both into binary and found the Network and Broadcast Addresses as well (with the binary conversions next to them)…
-
Having trouble memorizing power tables.
Hello! Not too long ago, I finally figured out how to (slowly) subnet. Although the problem I came across was memorizing the power tables. Going all the way up to class A networks, how far up the power table should I memorize? I can't seem to do it without using my figures but that takes time. Here is what I know without…
-
VLSM with class B
Im getting kind of hung on probably something very simple concerning VLSM for Class B. If you are given a situation where it gives you an IP 172.16.0.0 /22, and you have to use VLSM to subnet, what place do you begin? Like if you need 500 hosts on your largest subnet, for example. The examples I've seen are based on /16.…
-
CCNA 1 or 2 exam path?
Hello all, I'm new to this website, actually registering about 30 minutes ago. I'm sure there is some sort of post for this question, but I'm not exactly sure how to navigate through everything yet. So, my question if pretty much the subject or title of the post - which exam path should I take? Just to give a little bit of…
-
INE CCNA: Security 210-260 course
Has anyone use the new INE CCNA Security bundle for the 210-260 exam? I've got the official guide that I'm reading through, just looking for additional sources of material. INE has two courses "Security Technology 210-260" and "Security bootcamp: 210-260" for $79. I've heard good things about INE just curious if anyone…
-
ICND1 Failure
Hello all, I just whiffed the ICND1 yesterday with a 795. To give you a little background, I have been in the IT industry for over 15 years, most of the last ten years has been in IT Security protecting Fortune 5 companies from internal and external threats. I also served in the Air Force as a Tech Controller building…
-
taking the exam for the second time
Hi guys. I'm taking the exam for the second time on sat I'm very nervous.
-
error on the book.
The following commands are entered on the router: [FONT=Calibri,Calibri][FONT=Calibri,Calibri]Burbank(config)# enable secret fortress Burbank(config)# line con 0 Burbank(config-line)# login Burbank(config-line)# password n0way1n [/FONT][/FONT][FONT=Calibri,Calibri][FONT=Calibri,Calibri][/FONT][/FONT]What is the purpose of…
-
Routing question
Had to take a tech test for a job interview the other day and under the pressures of an exam-type scenario (mostly working against the clock) I wasn't sure about a couple of the Cisco questions. In this one the fact that the default route is incorrectly configured has thrown me as I couldn't think what traffic that would…
-
Question About sh nat
I've realized that I rely a little to heavily on sh xlate and am trying to improve my knowledge of sh nat. From the sh nat output below, I can see that there is a NAT policy that indicates that there is a static mapping for traffic coming from DMZ-Srv into the ASA at the interface named "dmz" and leaving the ASA out the…
-
Price check on this CCNA LAB?
Hello TE, I saw this ad on CL about a ccna lab and Just wanted to do a price check. Router: (1)2509-terminal server- has octal cable (3) Cisco 2811 Switch: (1)ws-c2950c-24 (1)ws-c3560-24ts-s V02 (1)ws-c3560-48ts-s V02 (1) 10U Desk lab rack
-
ASA ACLs help neeeded
I'm using the ASA5505 in Packet Tracer. What's the most convenient way to allow traffic from specific subnets into the LAN? So lets say: LAN 1 >> ASA >> Router >> ISP >> Router >> ASA >> LAN 2 LAN 1: 10.1.0.0/27 10.1.0.32/27 10.1.0.64/28 LAN 2: 10.2.0.0/27 10.2.0.32/27 10.2.0.64/28 I want each side to be able to…
-
Ccent
Failed second attempt by 9 points. I'm so ******* pissed right now. Should I study and take the 200-120 now that I've seen the questions twice and will more than likely see them again on the combined test? Or keep at ICND1? Thanks
-
How to study for ICND1 CCENT and study schedule
Hi all, If someone could give me an estimated time frame for a complete networking newbie to study for and be ready to take the ICND1 test it would be greatly appreciated. Also if some could also provide an example of a study schedule that too would be welcome. I am a complete newbie to networking and would like to know…
-
Subnetting
Hello everyone, my question is how do you do a subnet like this. 192.168.2.1 255.255.255.0 What i did was 256-255 = 1. Since it is a Class C. Block Size =1. 0.0,1.0,2.0,3.0,4.0,5.0. 0.1 0.254 0.255 Interesting Octet is in the 3rd? so for the first subnet 192.168.0.0. the first valid host would be 192.168.0.1? In the book…
-
About Cisco NetRiders Competition 2016
Does anyone know anything about Cisco NetRiders Competition 2016? I mean what kind of questions come and how can I prepare?
-
Configure the Network CCNA Lab Scenarios
I just wanted to let everyone know that I'm giving away my Configure the Network CCNA Lab book away for free from this point forward. I wanted to make sure my Tech Exams family knew about this first. You can download it here directly from TE: Attachment not found.
-
Passed ICND1 / CCENT - my way to pass
Hi Guys! I have recently passed ICND1 / CCENT, and I would like to share my experience to help others. If I will sound funny / odd or incorrect - sorry, I am not a native English speaker. First of all, I have used following resources to study: - UDEMY: "Cisco CCNA (200-120): The Complete Course" by Lazaro Diaz - UDEMY:…
-
NIC physical layer or data link layer? 2 deferent answer!
Hi I'm on Exam Cram book it said that it on physical layer. but on cbtnuggets it's on data link because it have a MAC address built in. can some one tell me what it cisco recommendation ?
-
frame leaves an interface
If the PC001 sends a packet to the IP address of the PC003, what will be the Layer 2 destination address be in the frame when the router01 receives it? PC001> router01> PC003 the mac address (layer 2) of the pc001! When a frame leaves an interface, on an Ethernet network, the source layer 2 address will be the interface…
-
frame relay medieval technology ?
Starting last semester and its frame relay,now i sort of dont get all the materials go around serial connections x.25 t1 which is basically speeds that most isps provided 10-15 years ago,then theres concept of private lines and public-while i get idea that data center would be using private isp line to support massive…
-
Did CCNA/CCNET get updated this year?
Hola! I want to start studying for the CCNET/CCNA exams but I am finding all the materiel are from 2013 (books and videos). This concerns me since every 3 years Cisco updates their exam and I cannot find anything about this on the internet. Would anyone know if the exam was updated recently or when we should see the new…
-
VLAN communication over WAN
Need a little clarification. Lets say I have two branches, I want each branch to have the same vlans (based on departments). Now I get how this would work locally with departments (vlans) just communicating within their own subnet and using inter-vlan routing for any communication between departments. But I also want the…
-
Afraid CCNA is too hard for me
So I just got my A+, N+, and S+ certs and now just started on the CCENT book by Wendell Odom. I'm on the 3rd chapter now, and must say it's pretty god damn confusing so far. There seems to be so much to know and it's quite complicated. I'm afraid CCENT/CCNA might be too hard for me. Does it get any easier?
-
Why is the first 2 ping lost?
R1#ping 5.6.3.2 Type escape sequence to abort Sending 5, 100-byte ICMP Echos to 5.6.3.2, timeout is 2 seconds: ..!!! R1#ping 5.6.3.2 Type escape sequence to abort Sending 5, 100-byte ICMP Echos to 5.6.3.2, timeout is 2 seconds: !!!!! Why is the first 2 ping lost?
-
Private VLAN Proxy Attack Question
Nevermind! Figured it out. Mods feels free to delete this
-
Q. EIGRP, OSPF, RIPV2 and routing table?
i have a question. a router has lear 3 posible routes that could be used to reach a destination on the network. EIGRP metric of 20514560, RIPV2 metric of 4 and OSPF metric of 782. why there is only EIGRP on the routing table.?
-
New Guy In Town
Hello Ladies and Gentlemen. I am just making this post to say introduce myself. I am just starting out and preparing for my ICND1 exam. I have noticed this place to be a wealth of information and for someone just preparing to start out will prove to be very useful. I have a little experience setting up networks as from my…
-
A ccna resource for learning by blueprint
Where I can find study resources for learning ccna exam topics line by line ?
-
Which Path
I think I've asked this before but never got a really good answer. I don't know what path I want to go down because I have interests in so many areas. I'm currently working in Tellecomunications so collab would obviously be beneficial. But I want what is going to not just satisfy me but also be beneficial. If I were to go…
-
How to filter malicious websites on a network?
Hi, i'm wondering how filtering of malicious websites is performed in a network? Obviously you have your stateful firewalls, but they don't account for users INSIDE the network who may connect to malicious sites or sites they shouldn't be on. I'm aware you can have individual rules on firewalls to block certain sites, but…
-
Road to CCENT
Hi My name is Jim and I'm a procrastiholic. So it's been a rocky road with more stops than starts. I need something to kick me in the arse so I can take my CCENT and then my CCNA - ultimately by September 12th. 1. That's my birthday and 2. that's the day before my review at work. I have many excuses but ultimately I'm…
-
CCNA (and beyond) Home Lab Questions
Hello everyone! I am new to the forum but have read TE without a registered account for some time. I am currently working on studying for the CCNA (and have plans to move onto subsequent certs as well). I realize that a lot of the CCNA can (and many people do) be completed with things like Packet Tracer and GNS3. However,…
-
ICND1 Pass Report from 4/27/16
Well ladies and gents, it happened. It's been 6 months in the making. 951/1000. 100% Operation of IP Data Networks 91% LAN Switching Technologies 83% IP Addressing (IPv4/IPv6) 100% IP Routing Technologies 100% IP Services 88% Network Device Security 100% Troubleshooting Resources: * Wendell Odom's ICND1 100-101 Official…
-
Failed CCENT
Score: 766 Should I hit the books and reschedule for next week? What's do you guys/girls do when you fail a test?
-
Cannot Ping From Second VLAN
Hello, I am using packet tracer to do a little labbing. I have a switch and two computers. Computer1(fastEthernet 0/2) is on VLAN 1 with an IP address of 10.1.1.100 255.255.255.0. Computer2(fastEthernet 0/1) is on VLAN 50 with an IP address of 10.1.50.100 255.255.255.0. Computer1 pings the switch (10.1.1.10) just fine. But…
-
subnet ripv1
RouterA fa0/0 30 host RouterB fa0/0 40 host RouterC fa0/0 50 host The internetwork is using subnets of the address 192.168.1.0 with a subnet mask of 255.255.255.224. The routing protocol in use is RIP version 1.Which address could be assigned to the FastEthernet interface on RouterA? A. 192.168.1.31 B. 192.168.1.64 C.…
-
videos for ccna
ok so ive got the lammle book but im a video learner and i was wanting to see what videos are recommended. I was looking at…
-
Old ICND1 and new ICND2
Hi guys, Could use some help if anyone can. I have the old ICND1 which I took 2 years ago. I want to get my full CCNA Asap. I have been reading some through the ICND1 stuff but I need to get a move on. Would it be OK to skip straight to the ICND2 stuff or will o need some of the new ICND1 stuff to understand it? I do plan…
-
Guide to study for CCNA:DC
Hi guys, I am a Master's student in telecommunications about to graduate in May 2016.I have my CCNA:R&S, have no prior work exp and I have not been able to get any entry level jobs as a network engineer. To improve my resume and my knowledge i have decided to do CCNA:DC and would like to get some guidance of where i can…
-
CCNA Voice (CICD) Packet Tracers/Labs
Does anyone know where I can find some preset labs for voice using packet tracer or gns3?
-
Passed ICND1 today
Passed the icnd1 exam on first attempt today. Used the todd lammle study guide and whatever free online practice questions I could find. Going to do my icnd2 pretty soon, any recommendations for preparing for that exam now? I have read the todd lammle all in one ccna guide as I was originally going to do the all in one…
-
Spanning Tree - Determining the Blocking Port
All, Been about 3 years since I have touched a switch, probably 4 since I have thought of spanning tree. Maybe more! So I was helping someone with their CCENT and I have to say I am drawing a blank in this topology. Determining the root bridge was easy enough. Lowest priority, lowest MAC. But Why did switch3 choose to…
-
NAT inside local/outside local inside global/outside global question.
Hi Guys, This really annoys me because i know it is a simple concept but I just can't memorize it. Are the below correct definitions? and do people have any specific ways that they memorize the definition of each term. inside local - name of inside source address before translation outside local - name of destination host…
-
Cisco home lab
Hola, I want to purchase a home lab setup to study CCNA and possibly CCNP (for next year). Someone recommended me this set because it comes with IOS 15. Cisco Complete CCNA CCNP Certified Network Professional Home Lab Kit 15 1IOS | eBay However, I am not sure if this is truly a good buy just yet. Would anyone on the forums…
-
How much harder is CCNA than Network+ ??
HI all, Im currentyl doing my Network+ & it seems not too challenging to understand. Once ive done Net+, I then want to do another cert. Do you feel that CCNA will be a big step up from Net+??? I do work for a Cisco partner (CCNA certed peeps) so I can always for help but im not directly in the IT deparment so im not…
-
CCENT Exam Scheduled
Hey all, Just thought I'd mention that I have booked my ICND1 exam for October 27th. This gives me 6 months to go over the material and go over my weak areas. Will be using Boson practice tests once I finish studying. Hope to achieve 85% or higher before exam day. :)
-
Free live ccna lab access via ssh, first come first serve!
Hello, I have a home CCNA lab consisting of: 2 1841 Routers running Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(3)T1 2 2801 Routers running Cisco IOS Software, 2801 Software (C2801-ENTBASEK9-M), Version 12.4(15)T7 4 3560 Switches running Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M),…
-
Failed ICND1 .
I JUST TAKE the test TODAY AND FAIL 794/1000 NEED 804 TO PASS. Operation of IP Data Networks: ...........0% Lan Switching Technology: ..................73% IP Addressing: ...................................67% IP Routing Technologies: .....................71% IP Services: .......................................75% Network…
-
Failed ICND1 .. :(
I took it this past saturday and ended up with a 781/1000 I do feel a bit discourage but I already rescheduled for this Friday. I hope this doesn't violate policy but are OSPF questions on this test? For those studying, I know it feels good to pass the first time but just remember that this test is very different in other…
-
Would I use IP ROUTE to connect 4 or more routers?
I have 4 separate networks in a ring and would like to be able to ping any computer on any network. The far left router has routes for the top and bottom but I can't seem to get a static route for the far right router. Is there anything I have to do differently for multiple hops?
-
Anybody try MeasureUp material?
I think measureup.com is affiliated with Cisco Learning.. They sent me a 50% off coupon to try their practice exams or learning material. I don't like the fact that it is time limited--good for one month or two depending on what you buy but the demo looked good and it had the same guarantee as Boson--you will pass I'm a…
-
Help with practice subnetting question
Hi all, can I please get some assistance with my answer to this practice question, in whether or not it's correct?. Ignore the "give your suggestion of trouble shooting procedure" part but more so the second part about identifying the connectivity problem. My answer: The failure of connectivity to the company printer is…
-
Study/Work
How many hours do yall study after you work a shift? How far do yall commute to work?
-
Packet Tracer Help
Hello, I have a question about connecting 2 routers together and to be able to ping the other side. I am using the PC that has an IP of 192.168.2.5 and trying to ping 192.168.1.100. Any suggestions? Thanks