-
ACL with SNMP trap
If I wanted to configure a device to send a trap to a NMS when an ACL denied some traffic to a particular destination; how would I do this? I did a quick search on Google but couldn't find anything... though perhaps I might have been searching for the wrong thing. Thank you.
-
EIGRP Unequal Load Balancing
Hello everyone, I'm a bit confuse calculating ratios when it comes to manipulating the bandwidth I hope for someone to help me out. I'm currently doing a lab which includes 3 different paths towards destination network 192.168.10.0/24...The following in the config I have please see if I'm doing it correct: Interface config…
-
Practical use of IP Default-Network in EIGRP
hello all, I was wondering why do we use ip default-network in eigrp. What would be the practical use of this command. Thanks.
-
CCNP with no expirience
I am in the middle of IT vocational school but they leave a lot of gaps, they just tell you the commands to make stuff run but don’t explain how anything works. So in my free time (which is a lot) I have been studying on my own and got my CCNA and wanted to continue on to the CCNP, but I have read that a CCNP with no work…
-
Routed Access Layer Addressing Scheme
Hi all, In the processing of creating an addressing scheme for a design with a routed access layer... something which I have never done before. I have created the addressing scheme, just not sure if it is valid. If someone is willing to have a quick look at it for me that would be fantastic. Just post here or PM me and…
-
642-618 firewall
Passed. 893 with very little study.
-
CCNP:S completed.
I started with CCNA Security in June and finished with SECURE this morning. I think I am done with Cisco certs for a while as I am on the brink of burn out. I had to reschedule SECURE exam three times. First due to Sandy, then the vacation and the last realizing I am still not ready. If it wasn't the last exam for the…
-
False sense of security re:SWITCH
If you check my posting history I think you will find a distinct patter of test anxiety, which is why what I am about to say feels so weird. Having looked through the test outline on cisco's site, gone through the CBT nugget's material, and now about 1/3rd of the way through Chris Bryant's videos.... It kinda feels like a…
-
Iad 2435
Can't seem to find this answer out there on the web so thought I might try here. Looking to deploy some 2435's to terminate a T1 with MPLS, Backup Cable internet, and sip trunking with analog handoff through the RJ21 interface. QoS, ZBF, and l2l vpn would also be configured. What kind of throughput do these things get, I…
-
VG224 pots dial peers
Hello, If you have a VG224 with these 2 dial peers and no other configuration (no callmanager) should they be able to call each other? voice-port 2/0 ! voice-port 2/1 ! dial-peer voice 1000 pots destination-pattern 1000 port 2/0 ! dial-peer voice 1001 pots destination-pattern 1001 port 2/1 Or do you need additional dial…
-
FXO and PRI question
So as I've learned, a T1 card will not necessarily also be a PRI card. The T1s I have are not PRIs. Question 1: SO I need some PRIs ... looks like this is what I'm looking for for my 2600xm routers?: Cisco 2-Port T1/IDSN Network Adapter, NM-2CT1-CSU Question 2: Once I get some PRIs, do I just make an T1 crossover cable and…
-
CCNP / CCIE Voice Lab UPDATE pics
I've cleaned up my lab cabling, and removed equipment that wasn't part of my voice lab. Heres what remains: I'm repurposing the lab for CIPT2 which focuses mostly on Multisite deployments, and this setup should be useful later as I transition to CCIE Voice study. The scenario seems to be standard for CCIE Voice labs and…
-
TTL filtering
I would like to setup TTL filtering on my production edge routers. Since I can't really model the real traffic in GNS3, I would like to ask your opinion. What's better: 1. Drop all packets with ttl less than 10? sample acl deny ip any any ttl lt 10 permit ip any any 2. Drop all packets with just ttl 1 or 0? sample acl2…
-
Cisco exam material and real world topics
I recently passed the CCNA and I've started on CCNP ROUTE. I've recently come across two items in a real world environment, HSRP and ISIS. Is this material covered on any of the exams anymore? I searched the ROUTE and SWITCH official exam guides and I didn't see either. Thanks!
-
UCCX: First node of its own cluster? or is it part of my CUCM cluster?
Someone answered this question for Unity on one of my previous posts. I guess Unity's can be clustered together but not clustered with CUCM's. Is UCCX also its own cluster? Thanks
-
Help: UCCX install requires license?
Finally got UCCX installed on VMware ESXi 5. Loaded the webpage which continues the installation, then asks for a license file ... what are my options to finish this install? Thanks
-
IPS 7.0 - Event Action Filter Question
Anyone know the difference between an event action filter that is enabled and an event action that is active? Can an event action filter be disabled and in active status at the same time? Thanks in advance for any input.
-
KWALLACE 1examamonth.com CCNP VOICE Vids
My question is: has anyone else used his videos as their only study resource (besides labbing) for the CAPPS and TVOICE exams? Would these videos be enough material to cover CAPPS and TVOICE? I've been using his freebie vids for CVOICE and CIPT1, but decided to spend the $81 to unlock the full collection so I can use them…
-
Passed CIPT1
Materials used to study: 1examamonth.com CIPT1,2 Videos Cisco Press CIPT1 book and most importantly, setup my CUCM and CUC lab on a VMware ESXi server as previously posted. Lots of hours labbing everything really helped my understanding of the topics. Moving onward to CIPT2 with Cisco Press book in hand
-
DHCP Snooping question
Hi I'm learning about DHCP Snooping and I have a question about it. Hope someone can help. If I have a network of 3 switches, with CAT1 being the root bridge and having the valid client and the rogue DHCP connected to it. On CAT2 I have the legitimate DHCP server. I enable ip dhcp snooping on all switches which makes all…
-
established command in ASDM
Hi there, The ASA's "established" command is mentioned on page 516 on the FIREWALL Official Cert Guide. It looks fairly straight forward to configure this from the CLI but I can't see where it can be configured in the ASDM. Grateful if anyone knows how to do this... Cheers
-
INE 2013 product schedule
INE's 2013 Bootcamp/Product Schedule and Updates Just saw this on INE's blog looks like there going to be making some big moves for 2013
-
Ftp vs tftp for config back up
Guys pls I need help with regards to automated config back ups. What will be ur service of choice? FTP or TFTP?
-
CCNP Route lab -- good or not?--
4 x 2620 XM (128/4 3 x Wic-1t 1 x Nm-4t 4 x Dte - Dce Will satisfy all the requirements for the exam ?
-
Access layer redundancy
Hi all, Wondering what technologies are available for access layer redundancy. By access layer redundancy I mean devices that connect to multiple access layer switches for redundancy purposes. For example, a server connecting to two access layer switches, so that if one access layer switch were to fail the other would…
-
I'm a CCNP at last
Had my TSHOOT exam today and passed!! Got a 986/1000, but got all the trouble tickets right. Started my CCNP journey right after I got my CCNA in August 2011, so well over a year, and now I finally made it. Feels great! I was looking back for a thread from August 2011 where I claimed I would complete ROUTE in a month or…
-
in which case router drops the packet with too large MTU
As I understand, in case router interface receives an IPv4 packet(for example telnet traffic) larger than the interface MTU, it has to drop the packet? And in case the router interface MTU is larger than the received packet, but the next-hop MTU is smaller than the received packet, then router can either:1) drop packet and…
-
OSPF Inter-Area External Route Filtering
I have a case where I need to filter external routes between areas. Apparently prefix lists using the area x filter-list prefix command does not work on external routes, only summary. Does anyone know of a way to do do this? For example the following does not work to stop 192.168.1.0/24 from entering area 3 if it is an E2…
-
Site to Site security.
OK jsut wondering how different people do things. Lets say I have a HQ site and a branch office. at the branch office I have a single router. at the HQ I have a external router, and a (checkpoint) firewall sitting inside that. I want a secure connections to tunnel all traffic from the branch site to the HQ, and I want all…
-
Need rspan advice...
So I don't think I can do this, but this is what I am trying.... I have 2 L2 acces switches that connect to a dist pair and they both have phones that need to have calls recorded on. One switch has the server that will capture all this data and 2 of the phones in question. On my switch that just has phones and not the box…
-
Route map issues
I have set up the following route map on int F0/0 FastEthernet0/0 ip address 149.100.200.200 255.255.255.0 ip policy route-map TO-HQ duplex auto speed autoip access-list extended Remote permit ip 149.100.200.0 0.0.0.255 any logroute-map To-HQ permit 10 match ip address Remote set ip next-hop 172.16.10.10 Then connected a…
-
preempt issue (CCNP Switching)
Well, i engage the CCNP Switching topics. One of them in which i am stuck is redundancy protocols. HSRP, VRRP and GLBP. Have read them plenty of times but still not accurately understand. As you know, GLBP is said to differ from the other two. In HSRP and VRRP, there is only one router performing packet forwarding whereas…
-
Route incoming calls to an extension on CUCM
I have an Auto Attendant setup on Directory number 4000 but can not figure out how to set a dial plan to ring in and route to it. CME was so easy just by selecting the voice port and then adding "connection plar opx 4000" and call it a day. What in CUCM is equal to this command?
-
How VRF creates virtual networks?
I see certain articles make analogies between VRF and VLAN, while the former creates virtual networks and the latter creates the virtual LAN. Then, does VRF use something like tagging as VLAN does to implement this?
-
CAT OS Equivalent of ISO 'show log' ?
CAT OS is still a weak point in my skill sets; mainly because its old and I've been taught Cisco from ISO and up. However my company still has many CATOS switches in place and I need to be able to navigate the commands a bit better. With that said I notice the 'show log' command differ quite a bit between to the OS types.…
-
Multicast on the CCNP
Hey guys, is multicast on the exam anywhere? I'm using Bryant's CCNP Switch guide at the moment and he has about an hours worth of video on Multicast but I can't see it on the exam topics anywhere and it's not covered in the 642-813 guide by the looks of it? Thanks Daryl
-
Certification Status: Enrolled?
Just passed CCNA composite today. :) On the Cisco page that shows what you have, what does the enrolled column mean?
-
COR and LPCOR on Cisco Call Manager Express confusion?
Hi All I'm, just about to configure my class of restrictions on a CME router and I've just checked the latest SRND and they are now listing LPCOR (Logical Partition Class of Restriction). Have Cisco changed the set-up of there Class of Service? I was all geared up to go with the system configuration using COR list's! I had…
-
IDF Configurations
I'm looking to install at least one Gigabit switch in each of my many IDF's (will make all Gigabit later) and based on the amount of switches in that IDF have one or two fiber homeruns to my core. All homeruns will be from Gigabit switches. I have a few IDF's that were configured as shown in IDF4, I prefer my homeruns and…
-
TSHOOT - can we use debug?
I have a feeling the simulator doesn't support it? Things like debug ip ospf adj and hello would be very useful for troubleshooting adjacency problems in ospf. Thanks.
-
ASA default + implicit rules
Hi everyone, I've been labbing with ASA 8.4 in GNS3 and in this case I have no access rules configured, default implicit rules only. Based on these rules (ASA default behavior) I understand that if I ping from a machine connected to an inside interface with a security level of 100, to a machine on a DMZ interface, security…
-
Loopgaurd
Dear members, I was wondering if someone could be so kind as to explain loop guard, try as I may to research this feature I cant seem to grasp it. For some reason I keep thinking that loop guard will effectively block a backup path should for some reason the primary path fail.
-
On asa 5505 how to forward sip requests to cme router either on gui or cli
On asa 5505 how to forward sip requests to cme router. Another question this is my first time working on a 5505. The topology is ISP->ASA 5505->2811->3560->lan Can I just have the asa setup for pat and access-list. Have the 2811 control the dhcp for phones and router on a stick. I really can't find any docs for a basic asa…
-
Portchannel Query.
Hi All Does any one have any experience of combining layer 2 and 3 port-channels? example, port-channel set to layer 3 with IP address and interfaces in the channel set to layer 2 and trunked? This was put forward as an idea at my work by a CCNP, i am not convinced this will work and cannot find any…
-
Default-information originate vs Default-information originate always
Oke, the #default-information originate command is used to advertise and default route to other OSPF router in area, but with the always command this somehow is forced?? So how and based on what will the router originate a defualte route?? Pointing to itself?? I'm having trouble wiht grasping the difference between them.
-
BGP - Advertise loopback
Hi all, I'm studying BGP and using IP Experts CCNP Route on demand video. Now the instructor is showing an example of confguring BGP and he's using BGP to advertise the loopback address of the Router. My question is, why would you choose using BGP to advertise the loopback, and not the IGP running in your AS? So what is…
-
Bootcamp vs Time
Hey guys, I am planning to get my CCNP R&S, but with my current job it is going to be tough. I travel a lot, and I work as a network engineer (wireless). Therefore, studying for my CCNP would be impossible. I could self study, but it has has been over a year now since I started studying for ROUTE exam, and took the test…
-
keep loosing connection to ASA
I am just beginning with the ASA & ASDM. (it is a asa5520 running in gns3). My connection always shuts off. I lose it while I am working on it. My console connection get shut off and also my ASDM connection gets shut off. I set my telnet timeout 256 ssh timeout 60 console timeout 60 I see some other timeouts in the running…
-
Can't Log into Asdm
Can't seem to log into asdm. I could ping it and access the download page in the browser for the launcher. Issue is once I'm running the launcher and type in the device ip add/ username/ password it doesn't open anything. Am I missing something? interface Vlan1 nameif inside security-level 100 ip address 11.11.11.251…
-
Frustrating exam experience
So last night (11/15) I had my Tshoot exam. Felt good about it and was ready to walk out a CCNP! With about 45 mins left I had to go to the restroom so bad I decided I couldn't wait it out. Went, the admin locked the computer, and when I came back, the administrator unlocked it again for me. I sat down and now every time I…
-
trouble with ASDM 6.4.7
Hi If I do a show flash On the ASA I can see the ASDM.bin in the flash I can ping my ASA, and my ASA can ping me. I have java 6.3 my OS is w7x64 If I Launch my Browser: then type my ip address of the ASA in the url, I should be able to launch the ASDM? My windows firewall is shut off
-
Cisco 1760 MGCP to CUCM
Hi guys, Im having and issue with a Cisco 1760 registering with my CUCM. It will downloads its config but fail to install it. Any ideas where to start looking. CORE-R1#show ccm-manager MGCP Domain Name: Priority Status Host ============================================================ Primary Down 192.168.10.3 First Backup…
-
CCNP monkey off my back at last
Just passed the SWITCH exam today after about 3 years of stop start study towards CCNP due to work commitments and finally got it completed. I really should have completed CCNP before now to be honest, but work has been non stop for last few years and I failed SWITCH the first time I sat it last year so it put me off…
-
Best Lab Simulator Software?
I plan on getting my CCNA and CCNP in 2013. What would be the best lab simulator to use? I have a Macbook Air right now and probably won't have a Windows system for at least 2 more months. I've heard of GNS3, Cisco's Packet Tracer, and Boson's Labsim.
-
CCNP from Nortel/Enterasys?
Hope all is well! I just passed CISSP and was thinking of doing CCNP (maybe +S) next. I have been working with wellfleet/bay/nortel/avaya and cabletron/enterasys for a while, but no Cisco gear - they are not on the state contract that most of my customers buy off of. I am pretty solid with the basics/IP v4/802.1q stuff,…
-
BGP Next-hop command
Ok, I'm currently studying BGP, and I'm using the IPExpert CCNP Route on demand videos. The instructor is explaining about the next-hop-self command, but I was wondering If I understood correct. So if you use the #neighbor x.x.x.x nex-hop-self command under the BGP process, and the BGP update is send to router in the…
-
Zone-Based Firewall with NAT and VPN
So has anyone deployed a full implementation of the zone-based firewall with inside, dmz, and outside zones complete with NAT and VPN? The thing is a piece of cake without NAT and VPN. Once I introduce NAT things go downhill REAL quick. I will admit I've got this labbed up in GNS3 at the moment, a first. I really want to…
-
EIGRP - FC/Split horizon question
On this topology my question is how are routes for 1.1.1.0/24 on R2,R3 and R4 being created on second and third occasion Does it have to do with Feasibility condition or with split horizon rule? After initial convergence R4 P 1.1.1.0/24, 2 successors, FD is 158820 via 192.168.24.2 (158820/156260), FastEthernet1/0 via…
-
Why does eBGP have an AD of 20
Just wondering. This means that a route learned by an IGP will not choosen over eBGP.
-
Program for doing CCNP labs
Hi everyone, I have Cisco's Packet Tracer and I used it to practice and do labs to get my CCNA. However, I am now studying CCNP and I have realized that it has limited functionality as far as CCNP configurations go. For example, using the MLS in PT, you can't configure HSRP (the "standby" command just isn't available). Is…
-
Small question about VTP
A very small question about VTP as I am covering this topic and currently cant lab out the scenario. Lets say for example you have 2 switches in a VTP domain one is a server and one is a client. The client has a number of ports assigned as access ports to vlan 100 which was acquired via a VTP advertisement from the server.…
-
question when doing etherchannel about a command in the cisco press | L2, L3
I see a pagp example with an additional option command. it is a loadbalancing command but they do not explain this part, (src-mac | dst-mac.) Also: another question: ABOUT L2, L3 when I configure the etherchannel, supposedly when you add the commands switchport trunk, this should be a L3 cabability, yes? But when I do a…
-
30 days out - where should I focus?
Hi Team, As stated I am 30 days out from the ROUTE exam. I have been studying for a few months and have finished the book. I have done the lab guide along the way. Overall, I have not found the material that confusing or hard, but I do not want to be complacent with it either and think it is easy. Can people that have done…
-
Good IPS rmaterial.
Hey guys, so my new job has a couple IPS here and there and I was wondering what the best resources are for getting familiar with these devices. I've got the IPS OCG guide and I've been a lot of the documentation on Cisco.com so I think I've gotten a decent hand around these device but I just wanted to check in and see if…
-
GLBP Query
Hi everyone, Just a quick GLBP query! I have the attached image configured and I have all devices set to preempt. I shut the interface down for Switch B and Switch C took over as the active. I assumed Switch A would have taken over as this had the highest priority?
-
CBT Nuggets second hand?
Hi all, I really like Jeremy Cioara's video's from CBT (which I'm sure we all do) but they are pretty expensive to buy. I've checked ebay a couple of times to see if anyone was offering any second hand dvd's etc but I've never been able to find any. It seems that literally the only place you can get the videos are directly…
-
Struggling w/ 3550 Password Recovery (Broken Mode Button....)
Hi guys, Working towards my CCNP Switch and bought a 3550 SMI switch off eBay. I plugged it up, watched it boot up, and as I expected had a password set so I knew I'd have to do a password recovery. I never had problems with the password recovery on my previous switches (all 2950's) but this one seems to be a bit…
-
set ip next-hop vrf ???
Hey guys, Is the set ip next-hop recursive option the only way to make a policy map VRF aware? It seems funny to me that it's not in the standard set ip next-hop yet it can be found when using recursive. Perhaps I dont understand what recursive means in this context? EX: route-map route_QOS_AR0_track, permit, sequence 10…
-
Cisco Hierarchical Design
I'm starting to get into the architectural side of things, and have been spending some time on the Cisco Design Zone, reading their guides. For the most part, everything makes sense, but I can't help but ask "Where are the firewalls?" I've read through several guides, and it has your standard access/distribution/core layer…
-
Softphhones needing a separate VLAN from data?
I am working on answering a question for a customer and I have hit a road block. I have deployed and managed several networks using hard sets for VoIP and have set up VLANs for VoIP and data. Now, I am being asked about soft-phones. Do they need or can VLANs be used?
-
Cbt nugget labs and terminal emulator refuse to connect
Hi My secure CRT works fine to telnet to real equipment. Also secureCRT works fine if I build my own topology and secureCRT connects fine If I open a CBT Nuggets CCNP route LAB gme3 opens and the I go to start a router then open a terminal and I will get a refused connection. If I change the terminal preferences to PUtty…
-
CAPPS/TVOICE Order
I just passed CIPT2 and noticed that most people recommend doing CAPPS next, then TVOICE. The exam topics of TVOICE seem focused on CUCM and gateways, so I was wondering whether there is a particular reason behind the recommendation. Thanks
-
Help Cannot Use the '/' Key on Numpad in GNS3
For some reason I am unable to use the numpad key (/) in GNS3, I have it setup to use Teraterm as the terminal software. Any Idea why I cannot use this? I will keep hunting if there is something I need to do to configure it in Teraterm that will enable this.
-
GNS3 Interface Always Up..
I was trying to do a simple EIGRP lab with 4 routers, 2 acting as the "distribution" and 2 as the core. The distribution routers had uplinks to the core for equal cost load balancing. I shut down one of the uplink, expecting to see no drop packets only to find out 5 pings were dropped (10 seconds). I looked at one of the…
-
Will this forum change to a Service Provider forum soon?
With the advent of the CCNA/CCNP/CCIE Service Provider and Service Provider Operations exams along with the retirement of the CCIP, will this forum soon be changed to a Service Provider forum? I think it would be a good fit to cover all of that material and those tests all on the same forum.
-
Udemy Problems
Hi all, I am currently using The Bryant Advantage as one of my study materials for the CCNP Route and am having problems with the videos. I did not have a problem before Hurricane Sandy. I can login with no problems but when I try to view a video it just buffers. I get the same result on different computers as well as…
-
HSRP IP Address
Hey guys, so when choosing which device is going to be the 'Active' and which will be the 'Standby' if the priorities are the same then it will go on the highest IP address? No 'Highest' IP address. Does this mean a number closer to 0 or higher to 255 if you know what I mean? For example I have the following: R3 interface…
-
txload 255/255 but no traffic
Hi all, I am experiencing a strange problem with a ASR1002 router that I just installed.thsi is a point to point link .the link is working but for some reason the txload on interface g0/0/0 show 255/255 even though there is no traffic going over to this router. Thanks in advance for any suggestions !!! Please see the below…
-
Anyone take the CCNA Service Provider Operations or CCNA Service Provider exams yet?
Anyone out there tackled these exams yet? 640-875 SPNGN1 Exam Building Cisco Service Provider Next-Generation Networks, Part 1(SPNGN1) 640-878 SPNGN2 Exam Building Cisco Service Provider Next-Generation Networks, Part 2 (SPNGN2)
-
Anyone take the CCNA Service Provider Operations or CCNA Service Provider exams yet?
-
Will this forum change to a Service Provider forum soon?
-
Knocked out SWITCH & TSHOOT
I'm a CCNP!!!
-
Now a CCNP - Passed TSHOOT this morning!
Hi everyone, I passed TSHOOT this morning and am now a CCNP!!! Feeling extremely stoked right now. I used Boson ExSim Max for TSHOOT and highly recommend it. I bombed the first exam, making some silly mistakes because not all of the ROUTE knowledge was fresh in my brain. I passed the second two practice exams and felt much…
-
Need Help: Connecting Unity to Publisher
I've been stuck on this one for 2 days. My CUCM Pub and Sub are up, but Unity will not complete the install. I even started over from the beginning at one point, deleting my Pub, Sub, and Unity machines to redo the installs, making sure I didnt select to use DNS on any of them in case that was the problem. I also tried…
-
CCNP Advice Needed
Greetings all. I just passed the SWITCH exam (2nd attempt) yesterday and I need some advice on how to proceed. I passed the BSCI going on 3 years ago (Nov. 23, 2009). So, presently if I am able to pass the TSHOOT exam no later than Nov. 22, CCNP will be wrapped up. The problem is that the SWITCH exam took me a lot longer…
-
Passed ROUTE on 10/31
I passed the ROUTE exam with a pretty good score on Halloween. I thought it was actually pretty difficult. I studied for about 6 weeks and went to a 1 week Global Knowledge bootcamp. I read the FLG twice, and the OLG once. Watched Jeremy's nuggets once, and did the Cisco Lab Guide all the way through with GNS3. I've been…
-
Passed ROUTE today
Finally. It is not as "black and white" as the CCNA but that is to be expected. I started studying after memorial day, which is about 5 months ago. Actual study time is probably half that. I pretty much started strong, then procrastinated over the summer, then picked it back up about 2 months ago. What did I use? - Chris…
-
ASA Active / Standby, can I recycle the inside interface of the Standby
So I got myself a couple of 5525x ASAs, Configured inside and outside interfaces, the usual stuff. Connected them together with xovers and set up failover. All fine,. So now, the secondary is a duplicate of the primary. agreed? Does that mean I can reuse the IP address I originally set to the inside interface of the…
-
MY Personal CVoice Mnemosyne Flash Cards
Attachment not found. Hey everyone during my current studies for CVoice I created my own Mnemosyne's to help me along the way. I figured this may be useful to other people so I've attached my CVoice Mnemosyne above. Please note that this is actually an XML file so you'll have to rename the file type extension from PDF to…
-
About CCNP and CCNA Validity
Hi, My CCNA certification ends on January 2013, i dint try to attempt CCNP all these days, but now i feel like giving it since my CCNA will be having no value after this, MY QUESTION IS: Is is necessary to complete all 3 (SWITCH,ROUTE and T-SHOOT) before the CCNA expiry(jan 2013) date or just any one is enough so that i…
-
Help me solve TFTPDNLD mystery
Trying to figure this one out for HOURS. It is now past 2am and I seem to be no closer to a solution than when I started. Basically I accidentally wiped my 2611XM router (I was copying a file to the flash using copy tftp flash, and the router asks to erase the entire flash [confirm]. Now erasing entire flash: eeeeee…
-
BSCI - which books?
I've read a few posts in the past saying there's two different types of books produced by cisco: self study and exam cert guides. I already have a bsci by clare gough but it's quite a few years old now - 2003. so, would these two books see me through BSCI? Building Scalable Cisco Internetworks (BSCI) (Authorized Self-Study…
-
Lab Question
Hey, guys. I'm reading the FLG and decided to just lab up a little classful live example. This is the design of it: http://i.imgur.com/J0dDx.png I used the same numbers and configured RIP v1. However, in the updates sent by R1, it's noted as 10.0.0.0 and then R2 doesn't put it in it's RIP table because it already has a…
-
CCNP Security Lab Equipment Recommendation
Hello all, I'm ramping up pursue my CCNP:S and wanted some recommendations in terms of what to buy for routers. I've been looking at 2611XM series routers however my colleagues at work have suggested 2800's instead. I've listed what I have below and would appreciate any recommendations in terms of routers and even ASA's.…
-
Cisco WLC appliance vs WiSM pros,cons
Hi Im wondering about whats the difference between putting a wism module in your 6500 or buying a separate wlc appliance 5508? Wism - economies of scale, easier management, more efficient inter controller roaming, and consistency of equipment in the data center Controller - you dont loose a free slot in your chassis Apart…
-
CCNP or other? What test should I take?
Ok so here is my situation, my CCNA expires in May and I need to take another 642. I was going to let it expire, but I just got this new job. =========================================== This position will configure and maintain the network infrastructure of the Lighthouse Gateway. Role: ·Update Cisco CSS configurations…
-
ASA 5505 ROMMON issue
I am trying to load a new image from an ASA 5505, old was deleted, and i am at the ROMMON portion, but for some reason it will only allow me to enter the ADDRESS, SERVER and GATEWAY info. I could use some help.
-
Switch + Tshoot same day?
So I've been doing my studies as needed for the switch and had this crazy idea... What if I scheduled the tshoot pretty much right after the switch exam, on the same day? Any one out there done that before? I have a lot of stuff going on outside of this exam (i'll be traveling the week before, and the week after) so I'm…
-
Voice Journey
What's good everybody? I'm just using this thread as a place where I can document my journey through voice. I'm posting it here in the CCNP Voice forum because I'm going to attempt CVOICE and CIPT1 before I take ICOMM. I read through the book and while it taught the basics, I found myself getting frustrated because I would…
-
SWITCH final prep and PASS (hopefully)
First off, reading the posts over on the CCIE section always get me fired up! They've inspired me to do my own "ultra mini-blog," on my progress of finishing off SWITCH . I think I am curently 1-2 weeks out from testing. The purpose of this blog is to document my final 1-2 weeks leading up to my exam, where I'll HOPEFULLY…