-
CCDA Exam Cost
Hello I have A CCNA , I wonder how much it cost for CCDA ? some people says 150 $ but when I went online to check on Pearson it says 250$???
-
$49 Ultimate Cisco Certification Super Bundle: Lifetime Access
Seems like a good deal, but I cannot confirm that. I'll just leave this here for the Cisco guys:…
-
Subnet broadcast question
hello i have question about subnetting.When i have an ip =172.162.255.255 it means sending paackets in all hosts in subnet just like for example 172.16.5.255 means all hosts in subnet 5 ?or it is all hosts in all subnets? 2) what is the difference of 255 subnet and 254 (except that subnet 255 it has lagerst value in…
-
210-260 CCNA Security - Passed
Hi guys, Today I passed the 210-260 exam with a score of 874. All-in-all I thought the exam experience was relatively good and have no complaints with the questions I was presented with. The main study material I used are as follows:* CCNA Security course * 31 days study guide * OCG * Video series on Safari Books * Cisco…
-
Another go at the CCNA
I decided to go back to study for my CCNA after taking time off. I left IT briefly to take this construction job going into my 4th month. In the last week or so, the material has been making a lot sense compare to the first studying few years back. I have read Wendell Odom CCNA book and Todd Lammle's book both from 2012…
-
Cisco Career Certification & Confidentiality Agreement
Hi all, I'm new here and unfortunately my first discussion has to be about my disappointment and frustration on how CCNA exam is being built and the poor customer service by Pearson Vue, following that. I'll start by saying I work in IT for more than 8 years and as an IT manager for the last 4. I have decided to get my…
-
How long ?
How long did it take you guys to complete studying and pass the CCENT or CCNA ? Trying to figure out how long I should allow myself to study for CCENT/CCNA. Mind you I do work full time as a Desktop Analyst current. Thanks
-
ccna
Hi there, I need help or advice on VLSM subnet assigment which is killing me. I am cool with VLSM subnetting but i am confused with this question (a and b ) Any help Thanks You must devise a scheme allowing for more than 402 subnets (0 to 401) with 401 being the last subnet allocated for users. You are issued address…
-
IPV6 HSRP, how?
I couldn't get it to work, I have full network connectivity without HSRP, I was able to ping every single interface from anywhere I wanted. But when I enabled HSRP and turned off R2 (that's the main router in my HSRP config), nothing worked. I put fe80::1 as the default gateway for PC2 (vlan 20) and PC3 (vlan 30), but…
-
Retake questions the same?
for those of you who retook the 210-260 exam, when you retake the test for the 2+ time, are the questions roughly the same or they are completely different? Thanks,
-
Feeling overwhelmed, need input...
I'm feeling mentally exhausted and overwhelmed and can't tell if I have a just reason to feel this way or not. So in short, I work for a company who is a solution provider. Initially they were going to provide a solution to a major cellular carrier which would allow them to provide more efficient monitoring tools to check…
-
CCNA Redundancy - help please, can't get STP, LAGP, PACP, HSRP working
Hey everyone, could someone go through my configurations on packet tracer (I have the .pkt) and help me out? I'm not sure what I'm doing wrong, and I've spent so many hours to get it working. Drop a reply and I'll PM the .pkt. Here's the topology.
-
Just completed the book. Now what?
Hi! I just read the last page of ICND1 book from Wendell Odom. I read carefully from page to page, trying to understand every concept before moving on. I did not go back to repeat any chapters yet however. I have done some labs that was included on a CD with the Book. But those labs just included content up to setting…
-
Passed the ICND 2 today..need tips
865/811 first try Definitely felt like I was prepared going into it. Study material was reading the book by Odom and CBT’s videos. Passed the ICND1 exactly 3 weeks ago. 856/835 first try 0 networking experience. Now im debating on either CCNA Security or CCNP R&S? and no I don’t care about not having any experience so…
-
RAOK Request: CCNA Security Exam 210-260 Voucher
Does anyone have an unused/unredeemed CCNA Security 210-260 exam voucher they can donate to me? I am financially indigent working hard to improve my life with Cisco education and certification.
-
CCENT Packet Tracer Labs?
Just curious if anyone know where I can download packet tracer labs already created to practice T-Shoot? I'm avoiding GNS3 at the moment, I just want to use Packet Tracer for now. Thank You,
-
My self-study strategy, few questions
Hi all, I have decided to get serious about my IT career so I passed my A+ (took me about 4 weeks for both parts) and I would like to tackle CCENT next. Reading around this forum (Very helpful, thank you) I came up with a following self-study plan, but I do have couple of questions. * Book: Todd Lammle. I was wondering…
-
Wireless or QoS next to study?
Hi, after finishing my CCNP R&S and covering everything that covers (which is pretty extensive), i then went onto MPLS and then ASA firewalls. After getting those 2 down for the most part (nobody can know everything i suppose), i'm still deciding on either to go with Wireless or QoS. My knowledge on both are limited…
-
Booked the 210-260 exam for next month
Hi guys, I have recently moved onto CCNA Security (210-260) and have been lightly studying for the past couple of weeks since attending a training course provided by Fast Lane. I have now booked an exam date to add some pressure. My current study materials are the Cisco Learning Labs documentation, SafariBooks for the…
-
Passed ICND2 to recertify!!
Short and sweet! Passed the ICND2 to re certify my CCENT and CCNA R&S!!! Scored 850. Not a bad score. All I can say. Next up JNCIA along with my GWAPT/GNFA!
-
Passed SECFND 210-250 in 19 days
I passed the SECFND 210-250 exam with an 865 in 19 days. I have the CCNA:Security, which helped alittle. Here's the story: I didn't know that I was in cohort 5 until about March 1st. I had responded to the email to move cohorts and had requested cohort 6. I had also requested to change my email address to my WGU email…
-
Cheap labs ccent
I am looking for the bare bones physical lab that will getting through the CCENT ? Please don't say read this thread and make me dig through hundreds of other postings!! Links would be helpful, Thanks!
-
CCNA - SEC Passed
ITPROTV Cisco ASA Third Edition ( THIS IS THE BEST BOOK FOR THE EXAM) and an old retired ASA 5510 + Experience Passed with an 867. Tips: LEARN ASDM inside and out. Seriously Learn VPN Technologies inside and out. Learn about the Next-Gen technologies that Cisco is all about READ THE BOOK I MENTIONED. If you just read the…
-
Cyberops certified!!!
I just passed SECOPS 210-255:å Score: 912/1000 Self Study I guessed on 10 questions and did faily well; alot of this exam is concepts and DO NOT OVERTHINK THIS EXAM!!! I've notice a serious overlap with exam objectives from SECFND and SECOPS. I also notice SECOPS is simply 10 chapters (not much) As soon as you pass SECFND…
-
210-250/255 to 210-260 (CCNA Cyber-Security to CCNA Security)
Hi Everyone, I was lucky enough to get onto the last Cyber Security scholarship program which I am really enjoying. I passed 210-250 (Cyber Security Fundamentals) last month and in a few weeks will take the 2nd half (210-255 Cyber Security Operations).. If i pass it will give me "CCNA - Cyber-Security" to go with my "CCNA…
-
CCENT/CCNA Labbing
Wanted to get ideas for labbing for the exam. Planning to take the exam as soon as I'm finished with Security+ so wanted to get a jump start and prepare my study materials for CCENT. I was looking at Boson for some labbing experience since I've heard a lot of good things but the cost is kinda steep for me at the moment.…
-
CCNA 200-125 maximum 700 pages book
Hello, Two days ago I passed my CompTIA Sec+ exam and now I must take CCNA Routing and Switching 200-125 in one month and a half. I have some IT experience and some knowledge about CCNA. I want a small book at maximum 700 pages to read and can't find one on the Internet. Do you have some idea about a book like that? Thanks!
-
IINS 210-260 Mock Exam or Practice Questions
Hi guys, with my exam just over one week away, I was hoping someone could recommend a good mock exam or practice questions. I don't want to be forking out a lot of money as it is really to find out my knowledge base and pin-point my weak areas. Any recommendations would be greatly appreciated.
-
Passed CCENT
Passed CCENT a week ago. #1 easier then Network+ IMO #2 LAB LAB LAB LAB Materials used; Wendell Odom Cisco Book CBT Nuggets Jeremy Cioara videos provided by WGU 1800 series router 3750 2950 Packet Tracer GNS3 Chris Bryant Udemy course (luckily got it for $10) very very good courses Ryan Beney on Youtube I also found a few…
-
Latest exam?
Hi everyone, I haven't checked in on this forum in over 10 years so please excuse my dumb question. I got my CCNA in 2008 and my certification expired in 2011. The last Study Guide I used was the Todd Lammle exam 640-802 which I still have, What is the latest exam #? I have some free time so I'm thinking of getting…
-
GNS3 lab - Having difficulties translating DNS between two Routers.
I have three routers and two switches. R1 > SW1 > R2 > SW2 > R3 R3 is the DNS Server R1 is the DNS client R2 does not have ip domain-lookup configured (and I don't think it should.) Here is the DNS configuration for R1: [COLOR=#29303B][FONT=&]R1(config)#ip…
-
ASA NAT command explanation?
Hi can someone run through this command with me, i'm well versed in what NAT is etc... Its the actual command i'm interested in: ASA1(config)# object network LAN ASA1 (config-network-object)# subnet 192.168.1.0 255.255.255.0 ASA1(config)# object network VPN_POOL ASA1(config-network-object)# subnet 192.168.10.0…
-
having problems with VSLM
[h=3]Hey guys I am doing the Packet Tracer 9.3.1.4,I am having the problem with VSLM or subnetting[/h] at the start of the video https://www.youtube.com/watch?v=bfFRiGygHns he explains the IP addresses of the G0/0 and G0/1 interfaces aswell as the PCs on the two subnets for G0/0 172.31.30.126 and the mask is…
-
Passed SECFND 210-250 1/2
Hey Everyone, Passing Score: 825 My Score: 917/1000 SELF STUDY Education: Sec+ acquired in 2016 M.S Cyber Security Acquired in 2016 Work-Experience: 1.5 Yrs in INFOSEC Personal, I recently failed the CCNA R/S composite with a 677. - my problem is configurations; concepts are very easy for me. Resources: Cisco Press Book -…
-
SECFND Question DATA/LOG
What's the difference between: Logs and Data 1) Cisco Press Book A) Session Log: - "Track changes made on managed host during a web-based system manager session" 1) Majority of Websites: https://vwannabe.com/2017/02/07/ccna-cyber-ops-5-0-security-monitoring/ has a breakdown and define of the exam objectives; nothing…
-
Failed Secfnd #Cohort5
I was close with 790, but failure is not an option. My Security+ certification and background was really helpful on this exam. This was my first Cisco exam and I was very confident with all the questions. I wont give up till I get my CCNA Cyber Ops! Will try again in a week. Wish me luck! :)
-
CCNA Cyberops SECFND 210-250 Exam Objectives?
I recently read the Cisco press book for CCNA Cyberops SECFND 210-250. I'm self studying. I went over the exam objectives and are somewhat perplexed with the following Objectives: 1.0 Network Concepts [12%]: 1.6 Describe IP subnets and communication within an IP subnet and between IP subnets 1.7 Describe the relationship…
-
210-255 SECOPS Passed! CCNA Cyber Ops complete!
Happy to put this one behind me and now ready for a little certification break. I was one of the Cisco Scholarship winners so I went through the Cisco curriculum, videos, and labs with Global Knowledge. I also joined the FB group which has a great Gap Document that gives you other things to focus on that may not have been…
-
How much will I need to know to pass the CCNA exam? Also will it help my job search?
I have been in the IT field for about 6-7 years and have worked hands on with HP Procurve, Cisco, Fortinet Switches, ect. I don't know IOS like the back of my head no, but I know it enough to get around it. I graduated DeVry University with a Bachelores in Science and Communications management and most of our curriculum…
-
1/2 of CCNA Cyber Ops done: 210-250 SECFND Passed!
I was one of the Cisco scholarship participants. Passed with an 883 (825 is passing) and finished in less than an hour. I had read this exam was an easy one and I honestly just finished the videos and most of the labs (but started them all to make sure to get the voucher) then went for it. With Security+, CCNA Security,…
-
Bought Used ASA
Hi, Recently bought a 2nd hand ASA 5510-from ebay in prep for CCNA Security exam. Having a bit of difficulty accessing it via ASDM. It is stuck on ASDMv5 which I can't get into due to Java issues. Also want to run later versions of ASDM and OS but having issues specifying ASDM images, getting not valid file messages, but…
-
Cisco ip phone 7942
Hi Everyone, I planning to start ccna voice. I bought 3 7942 sccp phone by mistake i had reset it 123456789*0# all. Now I don't know what to do next. Can I used it or not?Kindly share the steps. I have downloaded the zip file (firmware). Kindly share the steps. Thanks in advance.
-
Wierd Cisco 3850 issue
When I do a Show Flash: or DIR on one of my Cisco switches it reports no files, directory empty Has anyone seen anything like this before? It's up and running, maybe memory is just wacked and a reboot will resolve it?
-
FOR SALE: CCNA Routing and Switching 200-125 Network Simulator, Download Version
Please see my ebay listing. Selling for appx 1/2 price The simulator is split into ICND1 and ICND2 and can be used for both exams or the CCNA composite. Selling official cisco/pearson download version of [FONT=&]ccna-routing-and-switching-200-125-network-simulator- which has lots of labs to go with your studying.[/FONT]…
-
Free CCNA Training ( Udemy - Limited Time ! )
Hi guys ! I am sharing free codes for trainings in Udemy as you know (I have shared a few more before) Now, one of the good trainings to get hands on experience for CCNA is free with the link below. They have updated this training completely and the latest comments are really awesome. Hurry to enroll with the link below…
-
Loop Guard
Loop guard prevents the port from transition to forward state if it does not receive BPDU. The assumption is that the link is working fine but the BPDU is not received. But what happens if there is an actual problem with the link. Wont the traffic be blackholed if there was instead something wrong?
-
Any Method Of Procedure For Upgrade Of IOS
Hi, Does anyone have an MOP for upgrading of an IOS? Also, if I save the config in notepad such that there ismore, will it affect anything if something happens and I upload it back? Then should I copy and paste config in bit by bit?
-
Passed CCNA Routing and Switching for the 3rd time
So I passed the 200-125 CCNA routing and switching exam to renew my routing and switching, CCNA Security, and CCNA Wireless. There's a few things I want to mention. First off is I am a little disappointed in the exam. There was nothing on CDP. The number of simulations increased twice the amount than I took last time. It's…
-
Passed ICND1
[FONT="]Used the Lammle book and Boson practice exams.[/FONT] [FONT="] [/FONT] [FONT="]Man.. That was rough. Scored 905/1000, but the time constraints are really tight. Rushed through the sims. The fact that you can't go back and review answers gives an added edge to the exam. All in all a better experience…
-
Home lab help
I recently purchased 2 3750 switches for my home setup. My question is what routers will I need to add to these to be ready for future carts as well. I have read the 1841 and 2811, but want you guys feedback. Also will added two 2960's be enough for the ccnp switch wise? Nub
-
Entry level jobs after ccna without experience
Hi all, I'm in my 40s and currently changing careers to IT. I currently work in the train operating company in uk. I've done A+, Network , and currently studying for ncnd1 at the moment. What sort of entry level jobs can I apply for after doing my ccna. I don't have any experience and my goal is to work as a network…
-
Should I do CCNA before CCDA?
I am looking to get my CCDA certification. My motivation is to expand my current skills as a Systems Architect to include some validated Cisco network design skills. I have a strong general networking background and currently design "smaller" networks to support classified system processing. Currently nothing more than a…
-
Pluralsight for CCENT/CCNA
Just seeing if anyone has any insight/reviews for Pluralsight's video course for the CCENT/CCNA. I really enjoyed their MCSA videos. Thanks!
-
Passed the ICND 1 today! (+ my story)
Passed on my first try with a 856/1000 (835 needed). My girlfriend suggested I make a post on here since she knows I've been on this forum constantly for the past couple of weeks leading up to the exam. Study Materials: Official Cert Guide - Wendell Odom + Included Practice Exams CBT Nuggets Videos I give the exam a 7.9…
-
Help-CCNA R+S and Voice Lab
Hello Guys, I am new to networking field. I need some help.I'm setting up a lab. These equipment I bought for my ccna R+S then CCNA Voice course. I would really appreciate if someone can help me to setup my lab and how to make the connections, IOS,Ram etc. Kindly provide me with the details of missing items and equiment to…
-
Are CME 8.6 and CUCM 10.5 the software versions on CICD?
I just finished my CCNP R&S and decided to come back after collaboration in order to broaden my skillset. I currently have a 2811 that came with CME 8.5 when I got it years ago, but the posts I've read keep referring to 8.6. Also, some reference CUCM 8.6 while others say CUCM 10.5. Are both versions of CUCM on the exam or…
-
Difference between Udemy packet tracer and cisco's packet tracers?
I've been thinking about purchasing https://www.udemy.com/cisco-ccna-packet-tracer-ultimate-labs-ccna-exam-prep-labs/ and was wondering how they compare to the packet tracer files that came with the older Cisco Networking Academy packet tracer files. Personally I would love to get real hardware but money is tight. Since…
-
Version 3
I have the Odom books but was curious about what the version 3 talk is for. Do i have to purchase another book for this?
-
How you know you love CCNA/Cisco.
So I just wanted to share a story for people, who like myself are both struggling to do their jobs/RL while getting their cert at the same time. So I'm in the military currently studying to be a military IT which involves taking the military's version of a Cisco/CCNA class. Of course it's more like the fastest pace…
-
Can I use these Equipment for ccna security ?
Gate Protect Firewall GPO 125 & Cisco Firewall pix515e ? Around $150 I'm getting 2 Cisco Firewall pix515e , 1 Gate Protect Firewall GPO 125 and cisco pix firewall book by Richard
-
How to disable NAT in WRT300N?
Hello everyone, i'm new to this forum, so i'm not sure if this question is in the right place. I'm studying WRT300N behavior in Packet Tracer, but i haven't figured out if NAT can be disabled. Any suggestion? Thanks
-
What exactly do they mean by "the line"?
I've seen this term thrown around a lot in the textbooks I'm using as well as part of the Cisco IOS sometimes, but they don't give an actual definition for it. Like in the context of "line con (console) 0" or in the message "line protocol is up", or when you're asked to place an ACL on the line when configuring the RO…
-
packet tracer
Who has the best packet tracer videos for getting my CCNA?
-
Struggling to Figure Out What This Exam Covers...
What the title says. I've taken a CCNA Security class, used the official exam books, watched the CBT videos, practiced with Transcender, gone over the exam objectives, and took the exam once a few months ago (65%). I still feel like I have zero idea of what this exam actually covers. I'm running questions on Transcender…
-
Free CCNP All-In-One Training (Udemy - Limited)
Hello ! As you know I am sharing some free Udemy staff with you sometimes. Here is another one ! This course contains whole CCNP material ( Route + Switch and Tshoot exams ) and free with the link below. Coupon code may expire soon so hurry if you want to enroll. https://www.udemy.com/ccnp-all-in-one/?couponCode=FIRSTFREE
-
Starting to study for the CCent
Hello, I have bought the Wendell Odom Book for the CCent and CCNA. Bought the Kris Bryant class on Udemy. Planning to buy the elabs for bosco. Do you guys feel this is enough study material to pass the CCent? Your thoughts? Thanks Brad.
-
passed icnd1.... waiting for printed certificate...
:D :Di am just 22 years old. i didn't have networking experience befor... but luckily with one month effort i cleared icnd1 on jan 22. but now i had a question. i am from india. i applied for printed certificate. in how many days i may recieve it?? and is there any way to track where my certificate is?? anyone please…
-
Drop percentage?
Hey all, General question, on an interface, how to calculate the percentage of drops vs. traffic? For example, an interface shows: 91100226 packets output, 54264321771 bytes, 0 underruns 27539837 output errors, 0 collisions, 0 interface resets Is the percentage of output errors the (output errors/packets output)*100 or…
-
Cyber Ops- How to self study?
Hello guys, I want to look more into cyber ops and self study but didn't know how to go about it. I really want to see what all it involves before diving into it. Reason I don't want to dive deep into it right away is I want to make sure I will like it. I have tried to force myself to like CCNA routing and switching which…
-
Will a CCNA get me a job or what?
I am about to get the Security+ but I am thinking about going strait to the CCNA next. Will that land me a job in tech or what?
-
IOS Command sturctures and their differences for studying.
Between self study reading, (3 different books) and Packet tracer labs, I'm beginning to question whether or not I'm going to be able to keep all this information straight. Spent a good 2 weeks studying 9 hours EVERYDAY and finished up with OSPF. Now that I'm well into the concepts of EIGRP, I'm starting to realize…
-
What are your thoughts on Testout.com (Labsim)
What are your thoughts on Testout's Routing and Switching Course? Is it enough to pass the exam(CCENT/CCNA)? http://wwwnew.testout.com/courses/routing-and-switching-pro
-
210-255 Cyber Ops - Implementing
Hey everyone, I finished up the cohort a week or two ago and have been working on taking the second test. I purchased the book and it comes with a test bank that you can study from, does anyone know if this will suffice? I've been reading the extra documents that aren't in the book. I made a study guide from everything on…
-
Preparing for the CCNA Security
Im booking my ccna security certification exam soon. Looking for exam notes and what material to help me pass it much appreciated
-
Interface Vlan
Someone explain to me the relationship between a vlan and the interface vlan's please. The book i studied never covered it. Until recently I figured that the Int vlan was pretty much like a loopback interface, a virtual interface you could ssh to and ping. While following some labs I had to set a new native vlan to vlan 20…
-
Free CCNA Training (Udemy - Limited)
Hi guys ! I am sharing free codes for trainings in Udemy as you know (I have shared a few more before) Now, one of the good trainings to get hands on experience for CCNA is free with the link below. Enjoy ;) https://www.udemy.com/packet-tracer-labs/?couponCode=SURPRISEDX
-
Questions on network design (for a beginner)
This is kind of a general question about network layout/design. Obviously for entry-level jobs in this field you probably wouldn't be in charge of actually designing a network from scratch for an org, but rather working on administering an existing one. And the network's design would be based on the needs of the…
-
Subnetting Question
Hi all. Looking for some assistance with a subnetting question, looking for broadcast address and ranges. 206.82.73.146 /28 My answer: Broadcast- 206.82.73.159-- All good here Ranges- 206.82.73.147 -- 206.82.73.158--- All good here besides the minimum. I run this through all the calculators and get a minimum address of…
-
Mind Map for ICND2 200-105
Hello all, I am finishing studying for CCNA 2nd exam and I was wondering if anybody has or know where to get a Mind Map for it? I find Mind Maps very beneficial and I wish I had the time to build one for this test. Let me know Thanks
-
Just failed my ccent exam
i feel so stupid after seeing my score,i studied for weeks, flew to saskatoon to do the exam and i ended up with 760/1000.those simlets are my weakness
-
Passed the new CCENT v3 today. 100-105
Hi All, I just passed the new version 3 exam for ICND1 100-105. Scored an 860. Test was not easy, but fair. I studied for 1.5 months using the Lammle book and Cisco Press ODOM book. I regret using Lammle as my main read through. I would recommend using ODOM because although it is a little more dry, it covers way more…
-
VMware Workstation 10.0.7 Trunk Port
Working on my CCNA Wireless and ran into a snag while running vWLC on VM Workstation. I have everything up and running and the LWAPs connect to the controller and you can configure everything with out a hitch. I have been working through the labs and configured a new virtual interface and associated a new WLAN to it. I…
-
CCNA Cyber Ops Renewal
I am signed up for the Cyber Ops cohart starting in April. I was just looking into how much it costs to renew the cert and it looks like to renew you must pass a cert of same or higher level. Is this correct? If so are there other cisco certs that are not cisco specific? Also do most certs require 2 exams like Cyber Ops,…
-
EIGRP Router-ID on Packet Tracer issue
Good evening all, I'm brand new here. Have my ICND2 exam tomorrow and was just going over my EIGRP commands. I'm using Packet Tracer, will wire up my physical kit shortly if needed but for need of cramming time just wondered if someone could help me out. I've linked up 4 2600 routers with no Loppback interfaces. When I've…
-
Raduis or TaCAS+
Does anyone know what ports does Microsoft Active Directory uses when its configured to work with Radius or TACAS+? I would also like to know how is that process configured do you configure that on the Windows Server GUI or Is it done in the AAA configuration on the network device.
-
Configure Rip v1 With Rip v2
hi i want to implement this scenario : how to configure left part with ripv1 and right part with rip v2 ? singapore router is common between two parts can anybody help me?
-
Help with DHCP and Packet Tracer
I am trying to figure out how to configure DHCP in Packet Tracer and here is the lab I have setup... I have the DHCP server connected to a fast ethernet port on 1 router and a gig port on the other. The fa port on the router that I added with the HWIC - 4ESW will not allow me to add an IP address to the server, it's…
-
Question about Link-State Routing Protocols
After taking a practice text, I noticed a question was marked wrong that I feel should've been right. The question was something like..... True or False. Link-State routing protocols do NOT send out periodic updates. I answered False and it was marked wrong. However, OSPF, a link-state routing protocol, sends a update…
-
Please delete
Edit: Just realised the answer.. it was in my notes. Please delete!
-
Lab switch Input
I'm thinking about getting 2 or 3 switches for my lab since GNS3 can't really do switching well at all. That Etherswitch module doesn't really cut it. Been browsing some of the switches on ebay and would just like to know if these 2 would be suitable for a lab.…
-
Questions with regards on how to design this small network
Ok, so this is the network I want to design except add in a DHCP server. Should I configure the VLANS to have traffic route between VLANS on the router or the L3 switches? Another option would be to not configure anythong on the distribution layer switches and configure subinterfaces on the router itself. Any ideas?
-
Going for CCDA in a week or two
Hey Guys, I watched the CBT Nugget videos and read through OCG CCDA Edition 5 twice and did all the review questions. I feel pretty ready but any additional areas I should nail down before taking the exam? Cisco raise the price so I really don't want to give them anymore money then I need too Thanks in advance!
-
ICND2 Domain 3: WANs Study Guide
The 3rd guide is up. Check it out here. Free resources for CCNA are linked as well as SafariBooksOnline, ITProTV, Etc or here https://wp.me/P6TCWw-r0 Also, from previous posts Domain 1: Switching Domain 2: Routing
-
AAA Authentication Max Tries/ Timeout?
Using AAA New-Model I know there is a way to set the maximum number of authentication failures on a Cisco device: aaa local authentication attempts max-fail. However, it seems once they're locked out that's it. You need to manually reset the user account or "clear" the login attempts before they can try again. Is there a…
-
What's the Network Address I'm supposed to subnet?
Not sure if Cisco forgot to add the Network address to the instructions, but I can't do this Packet Tracer without an address to begin my subnetting. Does anyone know the base network address so I can begin?Attachment not found. Change for 5.6.1.doc to 5.6.1.pka
-
Topology CCNA 3
Hello, I have a topology for CCNA 3 that i'm trying to complete without success. Does anyone has time to help me in order to complete the topology? Thank you for your precious time. Kind regards, Ivano
-
CCDP Study Material 300-320 ARCH
Hello All, I am new to this site. I currently have my CCNP R&S. It is expiring in 45 days. I plan on taking the 300-320 ARCH exam to receive CCDP and renew my CCNP. I desperately need GOOD study material. Any suggestions from people who have actually used, and passed exam?
-
Old Cisco Devices
Old Cisco Devices Hi Gents, Need Advice The Company I Work For have Old Cisco Devices ( 1841 Routers And 2950 Catalyst switches), I Know These Devices Are obsolete But My Question Is Can I Setup A Lab For My Icnd1 And Icnd2 Exams. I asked permission To Setup A Lab And they Gave Me The Green Light I Know Gns3 Dont Really…
-
Ethernet header/trailer
When a computer receives a frame, does it get the header or trailer first? I always thought it received the header first but all of my material shows the frame being sent across the network with the trailer first (ie: sender |---[header][data][trailer]---> receiver). When I think about it, I believe it needs the header…
-
simulators & study materials for CCNA Security Lab
Guys Are they any good simulators for the ccna security exam. can one use an old version of cisco packet tracer. I have to renew my ccna (Routing &Switching) by june and I am thinking taking the ccna security exam eventually get the CCNP Security What books do you recomend along with other study material How long should I…