-
Beginning My Training For CCNP
Well, like the title says, I'm just starting my training for CCNP. To be completely honest, I am going to start by reviewing CCNA since its been a few years. Like all certifications I use a chunk of knowledge from it but the rest gets a little blurry over time. So my plan is to freshen up and then start digging in. My plan…
-
Practice Exams
Hi, does any one sue the full versions of the Boson Practice exams? I have always before got the version that comes with the oficial cert guides, but for the route I havent brought this book. But i really like the test exams as a revision tool to see where I am weak and need to study/ Lab more. I am wondering if I should…
-
Summer Sale at BryantAdvantage?
Dear all, I just noted that the CCNP material is on sale discounted on TheBryantAdvantage. Apparently Chris is now selling the whole CCNP library for $291 (Videos + Ebooks). Do you think this is a bargain? Has anyone bought Chris' CCNP material and give some feedback on the quality? Thanks! Regards, Lordy
-
Use INE workbook for NP Route/Switch preparation, is it good?
hi, Now I'm actively studying ROUTE and SWITCH materials preparing for NP exams, with IE as the ultimate goal, and start looking in doing labs during the study. In this (early) stage, is that good (or harm) to use the followings for lab? - INE workbook #1, and book remote racks for running the practice - Purchase Cisco…
-
CCNP Wireless
I see that the CCNP wireless track is different on all four tests - there are no overlap tests. I've browsed Cisco's site, but I'm curious for those of you familiar with both the NP and wireless as to how deep the latter delves into routing protocols, spanning tree, etc? Or is it like the voice track, where it's basically…
-
Starting CCNP ROUTE
I got my ccna last year, got a job as a network engineer. Worked my way into the Senior Engineer role then promoted to Tier 3 Support. I figure its time for ROUTE. I currently work heavily with ASA's, Sonicwalls, layer 3 switches, packeteers and other various tech junk. I really love the difference between studying ROUTE…
-
Call Manager VMWare and other equipment
What's the most recent version of CM VMWare, anyone know? I once saw CM 6 on VMWare on eBay for about $80, but is this too old to use now or prepare for the tests with? Would some Cisco 7940 IP phones be sufficient for labbing, or are they hopelessly outdated now?
-
Need help regarding default route in cisco
hi , I am trying lot but i am not fully able to understood default route. From my under standing , this means that for all routes which router don't know , send it to this addrress. What is the difference between these commands * ip default-network 20.20.20.1 * default-information originate * ip route 0.0.0.0 0.0.0.0 nullo…
-
Laptop to run CUCM
Good morning, I've tried with no success to get cucm and cucm SB running on one of the two amd desktop PC's using VMWARE workstation and gotten nowhere. It always freezes before finishing the install. That being said I think it's time to buy a personal laptop. I have a company owned one but obviously I can't do whatever I…
-
CCNP Security Finally CNSS 4013 Standard
I know I'm a week or two late posting this but I didn't see it mentioned elsewhere in this sub-forum.. CCNP Security - Career Certifications & Paths - Cisco Systems We all knew it was a matter of time.
-
BGP Multiple Route Reflectors
Hey guys, i'm working on adding a second route reflector to an iBGP network and i'm trying to understand all the ins and outs. The topology i'm going after is similar to the network in this Cisco case study BGP Case Studies - Cisco Systems it's under "Multiple RRs within a Cluster" in Case Study 4. Routers RTD and RTH are…
-
How long can I use the BSCI for CCIP?
Hi, Sorry if this question has been asked before, but I could not find any info on this subject. I am an CCNP with the BSCI (summer 2009) and BCMSN exams. I will probably go for the CCIP, but it will not be until next spring at the earliest. Will I still be able to include my BSCI in the CCIP by then, or will I have to do…
-
IPv6
I really like alot of the stuff I've studied about IPv6, but have not been able to find a really good book about it. I would think IPv6 would be a good thing to specialize in. Should be a HUGE need for IPv6 specialists in the next few years. Does anyone have a book they could suggest to really get in to IPv6?
-
Switch Down, onto Route!
Passed SWITCH this morning with a 923!! Got 100% or high 90's on everything except for the L2 security implementation topic. In my defense though, there was only like 2 security related questions Exam was a little annoying at times with really stupid questions like Is a toyota a a) car b) sedan c) truck d) suv or questions…
-
I can choose one official course, which one?
Which one should I take? I've already studied the crap out of SWITCH, though I still still haven't mustered the courage to take, and also I was sidetracked by having to take MS exams to retain partner status. The way I feel is, ROUTE is too big a subject to cover in a one week course anyway, so I might as well go for…
-
Blocking BGP Prefixes
Hi Guys, Question on BGP If you peer with a route-server which takes your prefixes and advertise them outs to other prefixes via one single BGP Negihbor how can you block a specific AS from receving your prefixes? Can this be done via route-maps or prefix-ilsts? Thing is that the AS that needs to be blocked is not peering…
-
CCNP/SWITCH - Wireless??
Well I'm finally - FINALLY gearing up to finish my SWITCH studies. I started back in the BCMSN (or whatever it was) - so my question is that since they changed the test format I've heard a lot of people complain about the lack of wireless material in the Cisco Press books. Does anyone have a good cisco white paper on what…
-
Putting the ROUTE exam on notice @ 0930 9/9/11 :-)
Finally got myself on the countdown to test day. Scheduled ROUTE for Sept 9th. I've been through the whole FLG with labs and now i'm working my way through the OCG to review and see what all i've forgotten since January. been using GNS3 to lab and got Boson's practice exam to use in the final couple of weeks of prep. It's…
-
Scheduled CCNP:Route for 8/17 @ 13:00 CT
I don't feel ready, but I have been studying off and on since January and feel that if I do not force myself to sit for it, I will just keep putting it off. I think my weak spots are BGP attributes and some IPv6 stuff. I just need to buckle down now and knock this one out of the ballpark. {FingersCrossed}
-
Should I buy more hardware for my lab?
Hi guys, sorry to come up with a Lab question again but after receiving very valuable input last time I will try once more Here is what I currently have in my lab: 2x 2970G 2x 2501 2x 2503 1x 2514 I am now about 70% trough my studies for SWITCH, I think. I have been working with switches over the past years so most…
-
VPN via router
Guys, I'm trying to set up a site to site VPN on a ASA 5505. The connection is set up via both different ISP router which are then connected to my home wireless router on different PCs. I'm able to ping the internet from both the firewalls do I need to change any of the setting on the router to allow the vpn to connect?…
-
BGP Multiple Route Reflectors
-
ASA Policy Nat
OK guys I'm trying to get into ASAs as I'm more of a Checkpoint man, I'm trying to get a NAT rule up and running, it shouldn't be too tough. I have an ASA with 1 public IP address running PAT, HostA and HostB are out on the internet and the webservers are inside the LAN if HostA hits outside on http, port forward to…
-
CCIP vs CCNP SPO
Basically what is the difference? I know IP has been for a while and NP SPO is newer, but what is the difference and which one would be better to go for in this day and age? I am doing my CCNP basic (well, there's aint anything basic about it) and then plan to go for IP/NP SPO, but cannot decide which one would be better…
-
CCIP campaign begins
-
PBR Questions.
HI GUYS/GALS IM using pbr and creating a acl to pass interesting traffic one way and all other traffic another way, If I was permit the interesting traffic one way and want all other traffic another way, SHOULDN'T MY EXTENDED ACL HAVE A PERMIT IP ANY ANY STATEMENT BELOW MY INTERESTING TRAFFIC ENTRY. i KNW DUMB QUESTION BUT…
-
BGP + MPLS Exam vs 2 separate tests.
-
Another CCNP
Passed ROUTE a couple of weeks ago and TSHOOT today. :)
-
Cisco 3945
Hey all, I'm hoping some of you voice guys can answer some basic questions for me. I'm looking to upgrade my current routers from 2811 to 3945s. However, as an added bonus my boss is looking to do SIP trunking with our carrier. We're a Nortel shop when it comes to our voice, so for now we plan on doing SIP from the carrier…
-
QoS Study Plan
-
kerx's CCNP Journey - Overcoming Bipolar and ADD to achieve NP Greatness
I was originally going to start a blog, but decided to start off here. I'm hoping to use this thread/forum as a tool to keep me on track of getting my CCNA, CCNP certifications. CAUTION: At some times, this thread may get graphic or violent. Rated NC-17 up to X. Please be advised. :P
-
Home-Lab: Sell 2970, buy 3548 ?!
Dear all, I currently have two 2970 switches in my home lab that I got from our old datacenter. They are nice switches having 24 GigabitEthernet ports but they lack Multilayer-Support which I think would be important to have these days. Now I checked eBay and saw that I could sell a 2970 at around 200 € and buy a 3548 for…
-
ACL and VACL
when you create a vlan access-map, you use an ACL to specify the traffic being procssed. If the ACL contains a deny statement, does this mean that whatever traffic being denied is denied before the VACL process it? For example ACL: sw1(config)# ip access-list extended ACL_TEST sw1(config-nacl)# deny tcp any any eq 3689…
-
CCNP Journey
Well I'd like to start a thread about my CCNP Journey. Due to some issues (good issues) at work, I feel that being will be required as soon as possible (partner stuff). So I will put CWNA on hold for the next few months and go guns blaring for CCNP. I am starting with ROUTE. My current lab is as follows: 4 2610XMs 1 1721 2…
-
BroadCast Storm/Spanning Tree Lab
Hello, I have 7 Catalyst 3560-POE-48, a 3560G, a 3560 V2, and 2 3560-POE-24 switches. I have 8 switches with out of the box Spanning-Tree enabled that are connected together redundantly so that spanning tree can block off some of the ports. I disabled Spanning-Tree on 2 switches that were connected into each other…
-
Earning more with a CCNP
I've been working at networking positions since '08 and I recently moved into my current job with a new employer four months ago at $50k a year. I just do routing and switching (with some firewall configurations) and have a CCNA, but I'm wanting to get my NP; not because I'm in love with it, but because my family is…
-
Took the ROUTE exam this morning
And scored 906/1000 . I thought I had really bombed because one of the labs was giving me problems. My stomach was in knots thinking about having to shell out $200 more to take it again then I seen "Congratulations". I just kinda sat there staring at the screen like really? For those of you that want to know I used the…
-
Multiple Bootstraps
I have a 3825 that I upgraded the IOS, when I boot the router, it loads 2 Bootstraps. As soon as it boots I get the following output: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: Support and Documentation - Cisco Systems Copyright (c) 2006 by cisco Systems, Inc. System Bootstrap, Version…
-
I got a new Job Offer
Hi, I would like to share this with you guys because without this forum I think I wouldn't git this offer. I'm going to be working with one of the biggest Telecom company in the world and I'm really excite. I went from been an Helpdesk last year to get promoted to Jr Network Engineer at my job to Network Engineer to a real…
-
HSRP Failover
I've only skim over the HSRP sections of the FLG, but sitting here at work, a question popped into my head as I go over the process. If the Active switch/router handles all the incoming traffic for the virtual mac/ip, when it fails and the standby takes over, what happens to the cache entries on the host/switches in the…
-
IPSEC Interesting Traffic Question
Hey guys this is my question. okay you know how you have to create and ACL for interesting traffic right? but that is for only 1:1 subnetting. say you had more subnets you wanted to have access to? example R2(work) vpn site setup 7 subnets of interesting traffic want access to) 192.168.1.0 /24 yeah you do it for one…
-
FWSM reading and references
Hi everyone, So I've recently accepted a new position at a different company and will be starting there in a few weeks. Really excited abut the new role it's a lot of what I'm doing already but at a smaller company so I'm taking on a lot more aspects of the network myself. They use ASAs for firewalls at their internet edge…
-
Asa > gns3
Has anyone got an ASA working in GNS3 ?
-
IPS 4240, license?
do you need a license for a cisco IPS 4240?
-
Black Hat: Routers using OSPF open to attacks
I thought this was a decent read so I decided to share. OSPF Vulnerability found Now the site Shortest path first has issued a statement about this article. It seems to mirror some of our opinions about the original article. Here it is
-
problem with WS-3550-24-FX-SMI
Hi guys. I have 2x WS-C2950-24, a 1x WS-C2550-24 and I just got WS-3550-24-FX-SMI. The problem is I cannot connect the FX to my 3550 and 2950. I read a few threads that and concluded that if I got CISCO 1000BASE-T GBIC WS-G5483 it would solve the problem. I also read that the GBIC is only working at 1000Mbps and cannot be…
-
ROUTE&SWITCH Composite Exam
All, In the olden days, you could take a single exam for both BSCI and BCMSN. I can't seem to find anything like that now on Vue website, is it still available? If not, has anyone ever taken ROUTE & SWITCH back-to-back in one sitting? Is it painful?
-
planning ahead
I have to take all three tracks (CCNP) for Davenport next school year. Would it be wise to study ROUTE, SWITCH, and TSHOOT at the same time? This is just for the classes though and they use the FLG. I'm not going to take the actual certification tests during those classes. If I do this then I will graduate with my second…
-
ASA issue - RESOLVED!!!! THANKS!!!!!
*I have checked Ciscos site and done some googling* I am working with a brand new Cisco ASA 5540. Cisco sent it to replace our existing backup asas power supply . At any rate it had no OS. So after playing in rommon and I got it to boot from an image off of my machine. The problem is when I reload the damn thing it won't…
-
GNS3 ASA Files
I really need help. I need to practice on ASA 5505 firewalls, how can a obtain a few copy of the files needed for GNSE, these files are not images, but 2 files which run Qemu Thanks
-
Spanning-tree and PacketTracer - wtf?!
Topology: D1 is set as the root for VLAN 10,20,100,200 and D2 (upper right) is set as the secondary root. All switches are running rapid-pvst When I do show spanning-tree vlan 10, it shows a non-existent root with a priority of 1 and a MAC address that doesn't belong to any of the switches. Further more, for VLAN 10,…
-
CCNP books
I will take CCNA soon and it should be fine. So I searched for CCNA books: (1) Publisher: Cisco Press; 1 edition (March 5, 2010) http://www.amazon.com/Routing-Switching-Official-Certification-Library/dp/1587202247/ref=sr_1_1?ie=UTF8&qid=1312303684&sr=8-1 (2) Publisher: Sybex; 1 edition (May 11, 2009) Amazon.com: Cisco…
-
Q.1.?
Ok I use to do this along time ago but was doing some reading and thought of a good question that might get you thinking. By no means hard but you might have to look it up. How would you provide resilience for intercom paging if you run a decentralized call processing model?
-
Odom Qos: single rate, three color policing - condition for exceeding
Hi everyone, I'm reading "The QoS Book" by Odom and I don't really feel comfortable with how he describes the condition for a packet to exceed in single rate, three color policer. a short quote from the book (p. 363, top of the page, list item 2): My common sense says that if a packet does not conform (not enough tokens in…
-
ccnp voice box set
Hey all. I was looking around at chapters and ciscopress for a box set for the new CCNP/Voice and I can't seem to find one. Am I just missing it or are they just not cutting any deals? D
-
ASA Firewalls
Guys, I have a project to do where I only have to learn about ASA firewalls and how to configure them. I'm learning my CCNA and i'm only couple of weeks away from finishing, but understand all the concepts. Are there any labs or tutorials which can help me get grips with ASA? Thanks
-
CCNP Product discounts
CCNP R&S, Voice, Sec 30% off all products current and yet to be released. Enjoy! Cisco Press CCNP Routing & Switching Sale Cisco Press CCNP Security Sale Cisco Press CCNP Voice Sale
-
HSRP Lab not working
Help please I've setup a very simple lab to pratice HSRP (See diagran) 1 PC (10.0.0.4) 2 routers running HSRP (VIP 10.0.0.1) acting as the client D/G The 2 routers are also connected to another router on a 192.168.1.1 /24 network. I keep a ping going to the far router from the PC (10.0.0.4 > 192.168.1.1) no problem. When I…
-
Cisco CCNP Security Certification Aligned to Federal Curriculum Standards for Network
Cisco CCNP Security Certification Aligned to Federal Curriculum Standards for Network Security Administrators and Engineers - Yahoo! Finance
-
Can't go up/up on serial connection
I'm running into a weird problem I haven't seen before. Granted, I haven't been configuring live equipment very long lol. While setting up a lab I can't go up/up on a serial connection using the default hdlc. I'm up/down. I configured clocking (64000) on the DCE end. It's actually flapping up/down, up/up, up/down, etc.. I…
-
Passed - CCNA-S today
oh yeah passed CCNA Security..can you say CCNA three more years. I learned a lot in CCNAS very cool program...now break time and then CCNP and who knows what next...
-
CCNP lab ideas
hey guys. I have like 7 x 1760 routers with all 12.4(15)T10 on them adv enterprise. and 5 switches 3 x 2950s and 2 x 3550s..I have an ASA 5505 and a soho 831 router....is this good enough for the new SWITCH/Route and tshooot CCNP topics for at least another year? or are these routers and switches too old for it?
-
EtherChannel vs Port-Channel
Can someone tell me what the difference between an EtherChannel vs a Port-Channel? In the FLG and OCG, sometimes they refer to the bundle as an EtherChannel, and others as Port-Channel.
-
BGP Routes withdrawn
So i'm troubleshooting a lab in the route FLG and I can't seem to get it to do what I want. Does anyone know how to find out why a BGP update was withdrawn? I've played around with different debugs but haven't seen anything. Here are the withdrawn debugs...any idea how to dig deeper? *Mar 1 00:44:38.687: BGP(0):…
-
ROUTE,SWITCH,TSHOOT frequency
I'm confused about the three exams required for the CCNP. I know the order I want to take them in - I've heard that ROUTE is much more difficult and that much of the studying can be done in GNS3 (haven't quite yet built out my pimped-out lab setup....so close). The question is, how much time can pass in between exams? Can…
-
Lab - dot1x authentication
Hey guys, I am attempting to get an Windows XP Pro machine to authenticate using dot1x using local authentication. I have disabled auto windows account logging in and certificates on the XP client Here is the config from the switch. [code] hostname Switch username test password 0 test aaa new-model aaa authentication…
-
Got 2511 off ebay, wouldn't boot
Man I got a 2511 off ebay recently to use as my term server. It was pretty cheap, but he said it worked.. Well just now I powered it up and the only output it gave was something like: "Bad memory. wrote 0 received 000000200 in ..." something along those lines... and it stopped there. Also, the "ok" light on back was…
-
Odom Qos: single rate, three color policing - condition for exceeding
-
Do I get a different number for CCNP or = CCNA
I'm CCNA and I'm taking the tshoot (Last test) on monday and I was wonder if I pass the test and I'm a CCNP, does the CCNP number is different from the CCNA or they gave you a new number?
-
Issues with DMVPN and Eigrp
OK I have three routers. R2 is connect to R1 and R1 connects to R3. I want to be able to to create a two tunnels on R1 that connects to R2 and R3. Created the tunnels, when I created the first one, everything was fine, but when I created the second tunnel I get the following message: *Mar 1 00:30:05.803:…
-
Arrgh Failed Route twice
Hi all Long time lurker first time poster. I have just sat my ROUTE exam for the second time today and failed. Both times i have missed it by average 100 points. I have been studying for the exam for about 10 months self study using The official CCNP books, cbt nuggets and gns3/lab equipment. Each time i do the exam i have…
-
Help with anyconnect/webvpn
I have a problem with the anyconnect web vpn. Here is my config: ip local pool new 10.0.0.200 10.0.0.210webvpn gateway WEBVPN ip address 74.x.x.x port 443 ssl encryption 3des-sha1 ssl trustpoint TP-self-signed-1439281522 inservice !webvpn install svc flash:/webvpn/acwin.pkg sequence 1 !webvpn context IT secondary-color…
-
Correct my undestanding of these okay?
okay: Radius and Tacacs+ are used as authentication servers with a Cisco ACS server? Radius is only authentication and if you were to configure it with your cisco devices everyone would have enable mode? or do you set the priv mode when you set up the radius server? I didn't see this in the configs? Tacacs+ by iself can do…
-
Switch or Route?
Hello all, Planning to go for CCNP and I am a little in confused at which one to go for first. Should I attempt the Switch exam first or the Route.I have gone through the Blueprints for both and find Switch more interesting but which one is more difficult Route or Switch.If i go for Route then I can use GNS3 for the sims…
-
ADSM hostnames
Hi, This maybe a very stupid question but I'm using the ASDM to add an Access-list to an ASA. I need to use a hostname but can't see how to do it - it seems you can only specify an IP address ? I know the ASA can use DNS as I've added my DNS server IP's to it. Thanks
-
CCNP Route simplified book?
Hey, Just wondering if anyone has used this book for there CCNP route studies and have any feedback on it? i havent heard of it but came across it trawling through amazon and for the kindle edition at £7, that aint a bad price :) . There doesnt seem to be much about it on the web. Cisco CCNP ROUTE Simplified eBook: Paul…
-
Cisco "enrolled" date
Hey, Just wondering when you check your certification status on the cisco tracking website, what does it mean by "enorolled date_here". I have sat an exam towards my ccnp ages ago, but havent had a chance to do anymore due to work/Degree commitments and are just trying to work out when i took the exam before i have to re…
-
CCNP : Switch passed :D
Just got back from the testing center having passed my CCNP Switch exam! first try too, still a tough exam! On to the final one now : Tshoot! woop
-
Re-cert time...
Been a long while since I had been here... But it is coming down to the wire on my NP expiring so while having a late night cram session I decided to post up. Basically my NP expires 8/18 and to have to go through 3 new tests would suck bad so I decided to pick the test I did the best on my last time through and give the…
-
Gns3
Hi, I've just started to use GNS3 but have run into a problem. I've configured a loopback adapter on my PC which is connected to an Ethernet Switch, which is then connected to a 3700 router. PC IP is 10.0.0.10 /8, Router IP is 10.0.0.1 /8. (See Lab.jpeg and ping.jpeg) When I do a ping from the PC I get like 1 reply in 4,…
-
Another Passed Tshoot test
I just want you guys to know tha I passed the Tshoot and now I'm a CCNP. Thanks for all your help and I don't what would have been without this forum, thansk.
-
A cheap, rack mountable QinQ switch
I'm looking for any vendor switch that is rack mountable and supports QinQ, yet is cheaper than a Cisco 3550. Any recommendations?
-
DMVPN Tunnels with two provider and two sites
I'm encounter with this problem at my job. Our sites have a router with a MPLS circuit as primary and a broadband as a backup. We have two DMVPN tunnels one for Headquarters and the other to our fail over. Now we have one site that we are going to setup with cable broaband as a primary and dsl as a backup. Since the data…
-
Question regarding BGP
All three routers are in BGP 65535. Router 1 is advertising its loopback and router2 is configured as a route reflector server for R3. I still see an invalid next hop in R3 BGP table after I configured R2 to also server as a next-hop-self to R3. Why?
-
Failed IPS
Man... So here's my story, I had originally set the exam for the 10th, on the 8th I didn't feel ready enough, so I pushed it back, I didnt really choose a date, I just chose any random date in the future and thought, hey I'll come back a choose a date later. Well on the 21st I checked and suprise, I had scheduled the test…
-
Any Good Labs on NAT and ZBase Firewall configs
He guys. do you know of any complete labs on NAT with 3 zones in a zoned base firewall. (in, out, dmz). You know I can config both but I have a heck of a time putting them together and this is a common skill. any suggestions on lab material to see these two working together? I mean, I understand I need to have routing…
-
what does this ACL mean?
Hey Guys, can some one explain the the bolden ACL statements mean below and why this guy put them there. It is like denying and the permitting the samething but the ACL will hit the deny 1st and won't it desregard the permit any how? so why even put it. I can put the permit any since we have the implied deny all but…
-
Multicasting
Greetings all I was told Multicasting was removed from the Route exam........ Per Cisco 642-902 Blue print its gone. Can anyone confirm this or is this in violation of the NDA thanks.. Route sch in two weeks. studying PBR now.
-
EtherChannel load distribution
Going through the CCNP OCG and I need some clarification on the algorithm used to load balance an EtherChannel. From page 109 of the book Here's how I took it. If I had a bundle of 2 links, and I were to load balance by source MAC address, if the last bit of the MAC address ends with a 0, link 0 will be used. If it ends…
-
Loop?
Though you Guys would gete a kick out of this, one of our branch offices was unreachable this morning, this is what i got for a trace route. 5 4.71.248.9 60 msec 20 msec 20 msec 6 * * * 7 4.53.98.6 20 msec 20 msec 30 msec 8 64.50.232.134 40 msec 40 msec 40 msec 9 64.50.232.129 30 msec 40 msec 40 msec 10 64.50.232.130 40…
-
GBIC Question (3550) WS-G5483
I just plugged 1000 Base-T WS-G5483 GBIC's. The logs recognized the GBICS 00:09:43: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul e is detected in Gi0/1. Speed and duplex will be autonegotiated 00:10:01: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul e is detected in Gi0/2.…
-
Certification expiration
So I have been trying to do repairs on my house, I had a baby 3 weeks ago, I did a complete network redesign and install, I'm working on multiple projects at work, and my CCNA expires on September 9th. I'm nervous that I'm not going to pass the ROUTE exam (scheduled for first attempt on Aug 8th) before my NA expires.…
-
passed CCNA...going for CCNP
Hi all, I have been reading the forums for quite a bit, but brand new to posting. I passed my CCNA a couple of days ago, and now concentrating on CCNP - Route. Just wanted to stop by and say hello. Cheers, Osijoe
-
Free Webcast on July 27—Cisco CCNP TSHOOT: Bull's-Eye Strategies
For what its worth, I got this email this afternoon and thought I would share with TE. ================================================== Free Webcast on July 27—Cisco CCNP TSHOOT: Bull's-Eye Strategies Pearson IT Certification presents a Webcast series, where authors connect with you online for live and on-demand…
-
MPLS, BGP Material
Looks like I am going to be taking a position for a managed services company.. Sounds like pretty interesting work. Lots of Cisco router L3 WAN work, some travel, and the pay/benefits seem fairly nice. In the same breathe it also sounds like a lot of work.. They said their pretty heavy in MPLS, BGP, OSPF, IPSec, GRE, etc..…
-
IP SLA Jitter Monitor
Hey all, I setup sla jitter monitor on a few routers and it works great. Also imported it into OpenNMS for graphing and alert functionality. However, I have people that work at home and was wondering if there was a way I could setup a client PC to act as an SLA peer. So I could then track the at home users VoIP quality…
-
IKE1 noth working? help!
Help I am at a loss. I cannot see where I went wrong. I have 2 routers 1760s. They are connected via ethernet e1/0 on both sides. The public address for R3 is 192.168.7.3 and for R4 it is 192.168.7.4. I use loopbacks for the inside lan address range. 3.3.3.1 for R3 and 4.4.4.1 for R4. I can ping both ways no problem. I can…
-
Switch simulator
Does anyone use a switching simulator ? I want to practice GLBP but I see GNS3 cannot emulate switches.
-
One Direction site to site vpn
I am trying to setup a one direction ipsec site to site VPN between A and B sites. The traffic will be originating from site A to site B. I am trying to limit traffic from Site A to only HTTP and allow only return traffic from site B. site B should not be able to initiate any connections. I have a problem getting the…
-
How to disable ICMP redirect on a switch interface
I would like to how to disable icmp redirect. I'm having problem with hsrp and dhcp. I have 2 switches with HSRP and i have a dhcp pool on one the switches, and I have a a Access point that is pointing to the HSRP virtual router. The problem that I'm having is that for some reason some clients are trying to get ips from…