-
CCNP Study Material
Hello everyone. I'm getting ready to pursue my CCNP, and I have a question about study material. I've noticed that Cisco Press has two sets of libraries: 1. CCNP Routing and Switching Foundation Learning Library: Foundation Learning for CCNP ROUTE, SWITCH, and TSHOOT (642-902, 642-813, 642-832) 2. CCNP Routing and…
-
OSPF network types
I know that there are 5 OSPF network types: NBMA (RFC) Point-to-multipoint broadcast (RFC) Point-to-point (Cisco) Point-to-multipoint non-broadcast (Cisco) Broadcast (Cisco) I am little confuse about these network types. My understanding is: Let say that we have R1, R2, R3 in OSPF Broadcast network type. This is like OSPF…
-
Adding cme to a cisco router in gns3
Hi Guys, I need to install a cme on a cisco 3700 series router in gns3 and I've downloaded the cme version cme-124-15-T from cisco official website, and I've add the downloaded cme file to a tftp server and tried to extract the cme files to the cisco router by using the following command, Router#archive tar /xtract…
-
ASA 5505 Startup-Config Error
I have an issue with my ASA 5505 that I recently bought. It has a base license and no config on it. When I start it up I get a error just before the user exec mode prompt saying "Reading files from flash !." It also shows up in the show startup-config errors command output. Do you guys know if this is a problem? Thanks for…
-
(DSP) Module (PVDM2)
I need a DSP card for my 3725, what's the difference between the different channels (8-64)?
-
MPLS VPN internet access
Hey all, I'm just going through the MPLS Fundamentals book on safari and was wondering: what is the most popular method of providing internet access for a customer through an MPLS VPN? I have labbed up all of the methods talked about in the book and by the far the easiest (from the SP and customer point of view) seems to…
-
MPLS VPN internet access
-
NAT 2xInterfaces in ASA 8.3
I am having a problems NATTING a second interface on 8.3 ASA My 1st Interface: nterface Ethernet0/0 nameif LAN1 security-level 0 ip address 10.10.10.1 255.255.255.0 interface Ethernet0/1 nameif outside security-level 0 ip address x.x.x.x 255.255.255.224 object network ENTIRELAN subnet 0.0.0.0 0.0.0.0 object network…
-
MSTP Topology Changes
need some help with Multiple Spanning Tree Protocol...We are seeing some syslog entries that reflect MSTP Topology Changes on our root switch but I am at a loss as to how to track down what is changing. I did some research and topology changes seem to be tied to non-edge switchports changing to a forwarding state whoch…
-
BGP cleared
-
LDAP Synchronization
Hi Guys, I'm trying to sync CUCM7 with my AD domain and I have succesfully got it to sync by pulling users but I would like to have it sync just users within a group. I have tried everything I can and am at a loss. Under LDAP search base I have: cn=users, dc=lab, dc=local and so far that will let me sync all users but…
-
OSPF help
okay here is is R2 and R1 connected by ethernet. you can ping to both sides but there is no neighbor relationship? why? like they don't even see each other but you have ip layer access? I have no clue why I cannot get ospf to work on these routers to create routing tables? R2(config-if)# *Mar 1 22:02:30.240: OSPF:…
-
tshoot lab
Was able to build this out at work with spare gear and I am pretty sure I got it working about right. However I have not gone threw any ROUTE material yet so I was kinda winging it on somethings. Has anyone else built this topology out completely and feel like comparing notes? Lab 4- 3750's 1 - 3600 (frame relay) 2 -…
-
3550 Power supply blown
So, whilst in the middle of my SWITCH studies my 3550 has decided to retire it's power supply - in other words,it went bang,bang -smoke, smoke. So I began my quest to source a new/refurbished one - you have got to be kidding me with the price of these things!! £180 for a PSU, the switch was only £100 on ebay. So what I'm…
-
Passed ROUTE
Took the ROUTE exam this morning and passed with a 976. Obviously I am delighted. I really enjoyed the exam, but it was tough, REALLY tough ( MODERATED labs!!!!) Just off to have a couple of pints of Mr Arthur Guinness' finest but I shall return later with a full debrief :)
-
Help please
I'm coming to this board because I know there is a wide variety of experience in here. I hope someone can help me solve a mystery in my network. I have an 1811 router connected to a metro ethernet connection. It has 3Mbps symmetrical bandwidth. When I get to speedtest.net and do a speed test, the download starts off at…
-
Question about Troubleshooting exam
Does the Troubleshooting exam test you on everything you learned in the ROUTE and SWITCH tests, or does it also cover additional material not covered in the other two? If it just tests, then the material one needs to learn is really covered by the other two tests (generally speaking). In other words, if you knew the ROUTE…
-
OSPF help
OMG it has been awhile but I cannot figure this out. I have 5 routers. (never mind the dashes uner the r8 the connections is straight down from R1--FRC----BB2) R8R2R1---FRCBB1|FRC||BB2 R8 to R1 is eithernet r1 to BB1 is frc connection r1 to BB2 is frc connection i can ping from r1 to r2 and from r2 to r1 fine i can ping…
-
Where do I begin?
I just recently earned my CCNA about two weeks ago, and I'm now considering going after my CCNP. I see that it is composed of three different tests: ROUTE, SWITCH, and TSHOOT. For those who are going after the CCNP or those who have already earned the CCNP, which test would you advise to study for first?
-
SYN Attack - Cisco ASA 5510
Hi All, Can someone explain to me what a SYN attack is? On my firewall in ASDM, it is showing me "Top 10 protected servers under SYN attack" what exactly does this mean? Thanks.
-
Expanding CCNA Lab
Hello, I'm looking to start the CCNP shortly and while I imagine everyone is going to advise using GNS3, I really enjoyed using physical equipment for the CCNA. Having the physical equipment kept me motivated - just having it sitting next to me and knowing what it cost, it kept me on top of studying (along with the desire…
-
KIWI Cattools rock
just my report back about kiwi cat tools backup. wow. simple and great. It even backs up mutiple contexts in ASA. It is alittle tricky but simple enough to do. But you can have it auto backup all your configs. I have it do it nightly. finally some piece of mind when we change stuff on our systems they are auto backed up…
-
CCIP vs CCNP:SP OPs
What is the difference between CCIP and CCNP SP OPs (in plain English please). I saw something about ITIL in the SP OPs track, but no mention of this in CCIP. Is CCIP more technical? Which one has more value to someone working in a service provider environment? CCIP:…
-
CCIP vs CCNP:SP OPs
-
Blue print of a real network!
Hi everybody! I have 3 certifications - CCENT - CCNA - CCNP/Switch Almost ready to take the Route to. My problem is that i have almost no experience at all working with larger networks. Through my studies i noticed that what the books learn is actually only the rules on how everything should be configured. I searched for…
-
Failed again....
With a 759 needed 790 I hate this test more and more every day
-
What's a Good Lab Rack
Anybody know if these racks are any good? Skeletek C24U 30" Rack Mount FRAME 24U for Cisco Router
-
QoS or BGP/MPLS
Not that it matters officially but are most people doing QoS first and then BGP and MPLS and or the composite, or vice versa? Thanks! Just curious
-
VPN Failover Question
I have what I thought was a simple task but i am having trouble figuring out how to implement it. I currently have a cisco 5510 connected to an internet router and a MPLS router. The MPLS connection is new and we previously communicated with our branch office subnets through a vpn tunnel i have configured on the ASA. Now…
-
Passed Cisco IPS Today
I really enjoyed studying for this exam, because I had zero practical knowledge of an IDS/IPS before. The great way I found to prepare for it was with things I do have experience with that it is similar to, being packet analysis and firewalls, which is essentially what an IPS is... performs packet analysis and has ACLs…
-
Route or Switch First?
Hello all! Completed my CCNA a couple weeks ago and really excited about starting the journey towards CCNP. I'm wondering, for those who are currently studying or have completed CCNP, which one did you start with? I performed the best when it came to switching/STP/VLANs on the ICND(s), so it's something I'd like to start…
-
802.1x Question
Hi all I'm going through the Boson exam for the SWITCH exam and got to a question that got me thinking. The exam is explaining that 'authentication host-mode multi-host' command is used to connect multiple hosts via a hub on a single port. Would this configuration be "best practice" when an workstation is daisy chaining to…
-
4000/4500/6000/6500 switch, which one?
Hi Guys/Gals I am looking into getting one of those baby to practice on. Cannot decide which one is the best bang for buck though. I am primarlily looking into experiencing with a switch that has the supervisor engine plus PVLANS and GLBP. I am rather inexperianced in those big switches, and since i am not on the…
-
QoS or BGP/MPLS
-
Passed QoS!
I finally passed the QoS exam today, at the second attempt.:) That was a mighty relief. It was a big psychological hump on the road to the CCIP. Now onto Route. Study materials I used: CBTNuggets (QoS and ONT) QoS Exam Cert Guide Qos Quick Reference Sheet The videos are a good intro to the concepts. It certainly makes you…
-
Passed Switch 642-813
Extremely hard test ugh!!!!!! scored 814 out of 1000, on to route....
-
SSLVPN Security
Hi All, How secure is SSL VPN over a web browser to a businesses corporate network? Can this be attacked, exploited, are there any potential risks? Thanks :)
-
TSHOOT nuggets
Has anyone gone threw these yet? I was wondering if he uses the topology released on Cisco's site for the exam or just does a variety of labs. Thanks!
-
Link State Flooding-Circular address space
I am really confuse about this one. I don't get it at all. Can some one please explain this to me as simple as possible. Examples will help a lot. Thanks
-
Passed QoS!
-
Using IPV4 addresses in ipv6
Hi all Hope your all studying hard for CCNP. Been reading up a lot on ipv6 lately as it was my weak subject on my last exam. I have cam across the subject of embedding ipv4 addresses in ipv6 addresses. Has anyone done this. I have tried configuring this on one of my 3640 routers but not having much luck Command: ipv6…
-
Firewall 642-617
Hi I will be attending the Cisco Firewall 642-617 with Global Knowledge next week. Has anyone done the course with Global and how did you find it? I'm still finding study material very scarce. I have been using SNAF CBT Nuggets in prep for the course next week. I would like to get the exam done within at least 2 to 3 weeks…
-
CCNP Security Forum
Hi Just putting it out there but do you think it would be worth creating a CCNP Security forum? Currently CCNP and the older CCSP track are merged into one forum. I guess this is one for the website moderators but personally I would like to see a separate CCNP Security forum. I think it may help distinguish between the two…
-
Stable IOS for GNS3
What 7200 platform IOS images have you found to be the most stable in GNS3? I've been experimenting but haven't found the right one yet.
-
Gatekeeper
Is there a platform IOS that does not require feature license (just for lab purpose) ?
-
PRI issues
Well, I have hit a snag in studies. All was going well until I got to Chapt 6 CVOICE and was trying to confirm ops based on example config in the book. I have a 2811 and 1760V connected back to back with VWIC-1MFT-T1s configs as follows: 2811network-clock-participate wic 3 !!!isdn switch-type primary-ni!controller T1 0/3/0…
-
TSHOOT from CBT Nuggets is OUT!!
Today CBT Nuggets finally released their TSHOOT training videos! I just read the news on Twitter: Twitter I am so gonna get a subscription
-
Trouble with Hairpin CME 3.3 and CallManager
stumped with hairpin between CME 3.3 and CallManager 4 calls from Callmanager 4 work fine calling phones on CME but the reverse is not true. dial-peer on CME is: dial peer voice 100 voip destination-patter 2... [which are extension #s of phones on CallManager 4] session-target ipv4: 192.168.100.100 [CallManager 4 ip…
-
HSRP Question
When using multiple vlan in a topology that has just one vlan using HSRP does the router have to have a trunk between each other to be able to ping from one vlan to the other.
-
DHCP Relay and Cisco VPN client
Pix 515 PIX OS 6.3 I have some remote access clients that are currently using a pool that is defined on the pix to get ip addresses. My coworker said that we need to use DHCP relays to have it forward the request to our internal DHCP server. He found some documentation that makes him believe this is possible. I tried to…
-
Q-in-Q Tunneling
Trying to wrap my head around Q-in-Q and see if it is a potential solution for something i'm working on. Looking at deploying a test network of Wireless Access Points that are capable of 16 SSIDs with a different VLAN per SSID if so desired. Just for argument's sake, if I were to deploy 3 access points with 3 differnet…
-
Bryant Advantage CCNP Pack
Hey guys, I bought the Bryant Advantage CCNP pack yesterday, from thebryantadvantage.com. I haven't received any e-mail response aside from Paypal confirming the payment. I made the payment via credit card also (and I've checked spam/held messages etc). Now, I understand it's the weekend; however, I previously bought the…
-
[Solved]EIGRP and frame-relay Hub&Spoke and point to point
I am really lost now with my setup. I have a R1 as the HUB and R2 and R3 as the spokes routers. Also, R1 and R4 and point to point. I have no ip split-horizon on R1's serial0/0. However, on R2, I am not getting the loopback address that I have configured from R3, and R3 is not getting the loopbacks address from R2. R1 and…
-
CCNP Route scheduled
Heya guys and gals CCNP Route exam scheduled for next Monday, 7 weeks of studying and almost 200 hours of studying. This weekend is going to be a lot of fun with cramming . Hope I haven't rushed it. Will let you all know how I got on.
-
3640 Rommon Memory Issue.
Hi Guys, Just wondering if anyone can help with this at all. I have just picked up to 3640's, both of which have an IOS image that requires more than 64mb ram that the routers have, so boot process loops. Any idea how I can erase the flash from Rommon so I can xmodem a smaller image on them etc. Cheers, Marc
-
Switch: failing at the first hurdle.
I'm on the first chapter of the switch OCG and reading about TCAM operation - my brain is now turning to jelly!!! I think this will take a few re-reads. I obviously need to get this nailed but it's a blow not to understand something that early on. Ironically, I don't think there's anything else in the whole blueprint that…
-
Finding the time
I'm involved in competitive sports, as well as having small kids at home (who need to learn how to ride a bike, throw a baseball, etc, etc), so finding the time to study/lab is challenging at best. For those of you in a similar situation, I'm curious as to how you hammer out the time needed (outside of work) to study for…
-
Starting CCNP
Hey guys, I've decided to start my CCNP. I'm starting with ROUTE, so I'm reading "Implementing Cisco IP Routing Foundation Learning Guide." I'm planning on doing my labs with GNS3. My goal is to get the whole CCNP done in 12-15 months, so I'm looking at taking the ROUTE exam in July or August. Any advice?
-
Playing around with LDAP authentication...
So last week I was playing around with and learning Cisco ACS and Radius Authentication on my ASA. This week I'm trying to figure out LDAP authentication on my ASA. I setup a test AD Win2k3 Server and configured my ASA as follows: aaa-server AD-SERVER protocol ldapaaa-server AD-SERVER (inside) host 10.33.85.177…
-
set vtp password to existing vtp domain
50 switches all in the same vtp domain with no vtp password 2 vtp servers 48 vtp clients What happens when I add a vtp password to the vtp servers? Do I lose all vlans on clients or do they not receive updates until they have the correct password?
-
ASA for CCSP lab
Got some questions on building a CCSP lab... Background: At work I deal with 5510's and 5520's - various VPN configurations + firewalling, no advanced stuff like failover, etc, but I get to design VPN and set the devices up from scratch... Also, there is a single spare 5510 which can be used for my exam preparation. Now,…
-
help me to configure the cisco router with multi ADSL devices
Deal All How to configure the interface of Cisco router 1841 which connected to All ADSL devices to let all users in Vlans access the internet. I need also how to configure the 1841 router to route the kinds of traffic. foe example : i have 12 vlans with 50 users and they need using remote desktop to server the traffic…
-
SSL VPN Web Contents
Hi All, On my Cisco ASA 5520, I have added web contents (JPG and PNG Logo) for customisation on my portal, however on the customisation page I am unable to locate the files in the Logo URL tab. Any ideas why it is not finding the web contents files?
-
TSHOOT Test - List of Layer 2 problems
I don't know if this is allow, if it is good, if not, I'm ok if this post is delete. I been study for the TSHOOT test for a while and I went to training last wee and I feel that I'm just couple of weeks away from taking the test. Now, the way I learn the best is by writing notes, so I decide to write notes bout what…
-
How long for results?
To be posted to the Cisco exam history site so i can get my certificate? My results show up on the pearsonvue.com/authenticate page but not the Cisco one yet, and it is driving me nuts waiting
-
Hotel !
Theoretically speaking.. Hotel (overseas) with 100 lines. Location, Columbia lol I dont even know whats avail in regards to access of there, but I have a friend who wants to build out a hotel there and needs some advice. He wants Cisco. Platform, CME since we dont have enough demand for CM. Would you go sip or pri with…
-
updated IPv6 RFCs published
Credit to packetlife.net for this one NAT64 RFCs Published Last Week - Packet Life RFC 6144 had an interesting note on IPv6 transition... "Post-Transition Phase (2012 and beyond): characterized by a preponderance of IPv6-based services and diminishing support for IPv4-based services.:" I don't really think you're going to…
-
Confused :( CCNP Route
Currently watching CBT Nuggets Route. What should I read? any recommendations? Please help. Ppl who have passed ROUTE, how was it? Just it was easy \ good \ difficult \ bad... :) Please give me recommendations. Currently using GNS3 and building my own lab. Currently own 2 x 3550's, 1 x 2600, 1 x 831 <-- will 831 help me?…
-
Access ASA using ASDM but with Device Name
In order for me to access my ASA using ASDM but the device name as opposed to the IP, what do I need to configure on the appliance? Thanks :)
-
Riddle me this
Just finished my CCNP this week (yay) with the TSHOOT exam on Thursday. Let me say, that was the most fun exam i have ever taken! Now, my question is, how tough is CCDA/Design exam for CCDP when looked at VS CCNP material? Anyone ever went from NP to do DA/DP?
-
New Lab...
Love the smell of new voice routers in the morning!!! I just claimed my new work lab… well, at least until I get them installed anyways! :)
-
CCNP SWITCH Passed
I sat for the CCNP SWITCH exam this morning at my local PearsonVue center and came out with a passing score. I used the OCG, FLG, CBT Nuggets, my lab gear and Cisco's website to prepare. I felt well prepared going into the exam. This exam is tough and will test your ability to retain the smallest details. I am glad I can…
-
pim sparse-dense and dynamips
Anyone had these messages before when using PIM sparse-dense on dynamips? IOS is c7200-a3jk9s-mz.124-25e.bin. I don't seem to be getting the same thing when using real gear which makes me suspect dynamips. it just bounces over and over and gives the same console message. *Apr 28 14:29:05.914: %PIM-5-NBRCHG: neighbor…
-
Routing TCP/IP volume 1
Got this book delivered this morning (£12 off eBay - bargain). All I can say is that I so wish I had this at the start of my ROUTE preparations; everything seems so clear and concise, with excellent examples. I've obviously only flicked through it but it seems such a good book. So, my advice - don't bother with the OCG,…
-
QoS question/verification
Its been a good year since I have done any MQC configs, so I just want to bounce this off some others. I have our branch router connected to a provider router which connects to an MPLS connection back to HQ. Its a 3mb pipe over the WAN, and 100mb on the branch LAN. so WAN--3mb---TELCO ROUTER---100mb----BRANCH…
-
Question about T1 Circuits
We have a ton of T1 and bonded T1 circuits to branch offices. Today my manager was trying to tell me that with a T1, you have a dedicated 1.536M up and a dedicated 1.536M down because of full duplex the circuit actually allows 3.072M. Unless I am going crazy or just don't know ****, I always thought that with a T1, the had…
-
TSHOOT Exam
How long do people usually study for this after finishing route/switch? What does it rank difficulty wise? It looks kind of fun :)
-
SWITCH Exam Scheduled
I finally scheduled my SWITCH exam for next Monday (4/25/2011). I am to the point where I just don't want to study for this exam anymore. I let a whole year pass by since the CCNA due to work and a new house. I have used the following: CBT Nuggets SWITCH Foundation Learning Guide Labbed using Cisco 3550's and 6500's I'm…
-
Configuration Issue
Hi Guys, Am facing an issue with a configuration on cisco 1841 router. I have 2 network interfaces on the router F0/0 connected to ISP1 via PPPOE with a Dialer0 Interface F0/1 connected to ISP2 via dhcp A 4 ports Switch connected to LAN via Vlan1 Interface. on the Vlan1 interface, i have configured 2 subnets…
-
Passed Route
passed route on the first try! Used CBT Nuggets (excellent for route) and FLG It is AMAZING how much better this test is from the switch test, just amazing
-
Question for my fellow CCNPs about onforce.com
Hi, I have to make some extra money on the side and while I was on a TSHOOT training the teacher mention onforce.com. This is not the first time I heard about it and I started to fill the account to the point where they ask how much I charge for 1. diagnostic/repair 2. Installation and 3. swapping parts. I line in north…
-
selecting a routing network
I have around 20 router to carry NMS data to NMS server. I am trying to select a routing protocol. Static route and RIP is out of my consideration. Now, i am wondering which one is better EIGRP/OSPF. Characteristics of my network: 1. Router's will be placed in a ring. 2. There are mixed interfaces. eg. E1, Ethernet, Fiber.…
-
Pix translation issue
Ok guys guru I have a problem. I am trying to set up sonicwall netextender on a SSL 4200 with a pix 515 firewall. I have configured the SSL to a T but in the pix I keep getting this error: 106011: Deny inbound (No xlate) icmp src inside: internalserver dst inside:192.168.200.201 (type 0, code 0) 106011: Deny inbound (No…
-
Arrrrrrgh!!
Just to save anyone the hour of frustration and headbanging that I've just had....... DO NOT USE UPPER CASE WHEN CONFIGURING ROUTE MAPS/ACCESS LISTS unless you are sure that you will repeat them when referencing the route map/access list!!!!! "route-map EIGRP2OSPF PERMIT 10..........." "redistribute eigrp 100 subnets…
-
FXO to multiple extensions/ports
I have a 1760 with a FXO module and FXS module. I also have a good ole 7941 sitting on my desk. I have my home analog phones connected via one of my FXS ports and my OOMA connected via FXO. Calls flow through from OOMA to my analog or I can do the same thing in reverse by pressing 9 from IP Phone or Analog to get outside…
-
Which Test First..
I have started a new job with an awesome company that encourages continual learning. I am planning on starting my studying within the next month. I was wondering what order did you take the tests in and why. Also besides the cisco press books was there any alternate reading that you found helpful? By helpful i don't mean…
-
CCNP Switch MegaGuide.
Has anyone read it? I'd appreciate comments about it. :) Thanks!
-
ASA Version:
Hi All, Is ASA Versions 8.2.X compatible to work on a Cisco ASA 5510 which has 256 DRAM? Thanks!
-
Site to Site VPN / Computer Authentication
* I have posted this under CCNP forum too. Sorry for double post. I am in the process of setting up a site to site vpn using an ASA5505 on the remote side and ASA5510 on the main office. The ASA 5510 side hosts all the servers and the ASA5505 will have one user connecting to the same domain in the main office. The remote…
-
CCIP vs CCNP SPO
-
Help Lab Configure ?
help configuration to execute can call from DaLat to Sai Gon. hihi.pkt
-
Cisco Macro not executing Interface Range
This one has been getting to me for a few days now.. I'm trying to get some pre-configured macros on all my switches so when I perform an upgrade and I can just kick off these macros.. The goal of this macro: 1. Remove and shutdown vlan 1 2. create VLANs for users 3. Assign the ports to the desired VLANs Here is a test…
-
VOIP for the Security Guy
Anyone have a decent list of security readings for VOIP noobs? I am looking to set up an Asterix server at home but I also want a decent list of stuff for general knowledge of VOIP and the like.
-
Ebook...For all up up-and-coming Switch folks
Deal of the day: $9.99 eBook Deal of the Day Switch Foundation Guide...thought somebody here might benefit.
-
ROUTE Exam
I'm about to take the exam in a few weeks. I just need some reviews on the new cisco labs that they offer for 25 hours. Is it wortb it? or should i just continue using GNS3 seems temping with there labs. any advice?
-
Countdown to Extinction... ahem I mean SWITCH
Hey there fellow Ciscoholics! I took and failed SWITCH in July last year, and it left me so pissed off that I took TSHOOT a while later and passed it with flying colors. And about two weeks ago I took and passed ROUTE as well, so now it's time for revenge! I've got SWITCH scheduled for Friday next week and I feel pretty…
-
Problem with IP Telephony Setup with Packet Tracer
Port Assignments: CME: fa0/0 - 192.168.2.1/24 CORE SW: fa0/2(connected to CME) - 192.168.2.2/24 fa0/3(PC1_MIS) - DHCP obtain IP fa0/4(IP_PHONE MIS / PC2_MIS) - IP Phone can't obtain IP & DN Number BUT PC2_MIS was able to obtain DHCP IP. the rest of the toplogy below both host and IP Phone where able to obtain IP. all host…
-
Backup old PIX 5.x Image?
Hey guys, I was recently assigned to upgrade an old 5.x PIX image to 6.2 (not enough memory to upgrade to v . Thing is, when I do the show flash cmd I don't see any .bin files -- only some strange output that doesnt tell me anything about what files are in. I found the following links that might be of help... Upgrading…
-
Passed BGP Exam
I sat and passed this exam today. There were some typical Cisco 'who thought of these questions?' on there but overall it was fairly straightforward. For preparation I used Internet Routing Architectures, BGP Design and Implementation, Routing TCP IP vol. 2, BGP Case Studies, INE's BGP bootcamp, and Cisco BGP-4 Command and…
-
Cisco Official IOU labs for CCNA CCNP CCIP
An email i received this morning, does the website work for anybody? Cisco Announces a Networking Education Breakthrough with Cisco Learning Labs Cisco announces a networking education breakthrough with Cisco Learning Labs. For the first time, IT learners can now access real Cisco labs with both routing and Layer 2 core…