-
Bsci + bcmsn + tshoot
I'm nearly ready to take my BCMSN exam. Assuming I pass it, and am able to pass the BSCI in a timely manner, I can take the TSHOOT at any time and get my CCNP, right?
-
Tshoot results?
So are they going to mail us the results or will they be available through pearson vue? I thought I read that they get mailed to you when I finished the exam.
-
Switch.
Just ran through all the test questions on the CISCO site, now have a list of 20 areas I need to brush up on, I really hope there are not to many questions like to enable dot1x on a switch do you enter 1 #dot1x enable 2 #dot1x on 2 #dot1x system-auth-control in my mind this is what the ? and tab key are for ;) Learning the…
-
Windows VPN client and CISCO
Hi, I haven't ever set up remote access VPN's. Only site to site. but I want to enable VPN access to my test network (currently security limited to IP address and port filtering through the fire wall ) I have a 1841 router with the security feature set, and I was wondering how you go about setting this up to deal with the…
-
CUCMBE 7.1.2 in VMware
FYI.... I built a CUCMBE 7.1.2 server in VMWare Workstation 6.5.2 on a 32-bit Windows XP SP1 (don't ask) box. Everything works peachy with this CUCMBE 7.1.2 VM when I run it on this Windows XP box (in either Workstation 6.5.2 or VMWare Player 2.5.2). However, if i take the VM over to a 64-bit Windows Server 2003 box…
-
another lab advice thread (i know..)
After much debate i've decided to do the ccvp now that NP is basically down. I have voip experience but no cisco experience (and no telephony experience). My mind boggles at all the different network modules, cards, etc. I presume that after I complete CVOICE i'll have a better understanding of how cisco's solution fits…
-
Which path should I take
I passed the BSCI and BCMSN exams and was going to finish up my ccnp after my college classes end this may. Should I take the ont and ISCW exams or should I take the TShoot
-
Nat-pt
Closed.
-
QoS Traffic-Type Prioritizations?
Does anyone know where I can find info on which types of traffic would require higher levels of prioritization? I'm trying to determine which of these types of data would require the highest/lowest priorities: video conferencing, video streaming, call clocking, net mgmt traffic, VOIP, etc. I don't recall seeing anything at…
-
Full Mesh Frame
I have a 2620 with 4 serial ports. I was able to build and hub and spokes frame relay cloud with it but I cant seem to get able to do a full mesh frame. Anybody got a config for a full mesh frame cloud I could have?
-
Command Help
I am reviewing some of the configuration files and there is one command that I don't seem to understand in there: ip sla enable reaction-alerts I have looked through the Cisco documentation and it doesn't seem very clear why this command would be used.....can anyone help?
-
how to configure wic-dsu-t1 card?
i just bought 2621 router to plug into our spare dsl line. since it had dsu-csu card installed, i was wondering if i can use that for dsl! i'm in nyc and we use speakeasy. i'd never configured one of this ,so any help or pointer to website is greatly appreciated. btw if i am to contact isp, what kind of information would i…
-
ONT-LAB-1 .. VoIP
Hello All, i would like to know how did you guys practice this first lab of ONT. the lab which is in lab portfolio... we need a cisco ip communicator for this device, and two hosts need to call each other ... is it possible to do this lab in GNS3 ? from where to download this cisco ip communicator ?
-
bcmsn easy or difficult !!!!
Hi i passed my bsci and i'm preparing to have a bcmsn exam, as i'm looking to the diffrents post concerning bcmsn i'm a bit confused some said that it's the Easiest exam in ccnp and some said that it's the most defficult ??? any advise ????
-
ASA site to site VPN cookbook
I see the ASA has a VPN wizard for site to site VPNs. Anyone set one up with this and has a cookbook and landmines to watch out for?
-
Cisco 877w Configuration
Hi TE, I'm trying to configure my 877w for home usage. Right now I utilize an ADSL connection. Because of my location, I do not have access to the modem put in place by my ISP. They have however allowed me to run PPPoE passthrough (which works perfect from a PC). With the 877w, I'm trying to hook it up via the PPPoE…
-
question on logging levels??
hello to you all cisco gurus! :) i was just reading about the logging today and found out that there are 7 levels to it. my question is if i set the level to 4 what is that going to log? what does each level going to log? for example, if i want to log the down state of my wan interface, which level of logging i need to…
-
cheapest ccie lab gears? any suggestion?
i was just wondering! is there any website where i can find information about cheapest ccie lab gear? plus the necessary modules? i know that i may do cheaply using gns3 with 3550s and 3560s. but how cheaply can i build
-
TSHOOT demo and ISCW resource help!
Hello, sorry for the odd mixture of topics, haha, but ironically I found one while looking for the other. First I need some help with ISCW labs, I can not find anything anymore about ISCW when it comes to PPPoE/A labs. It seems that Cisco is trying to depreciate this one quickly. While searching around for some ISCW things…
-
Passed QoS
-
Multisite Multihome
Hey all, I've been trying to figure out how to make this work cleanly but I don't like any of the solutions I've come up with. We have 2 sites that we'd like to multihome out of. Now, each site was allocated their own block of IPs by their respective ISPs. What I would like to happen is those blocks of IPs always go out…
-
Bc and Be
Quick question guys...something thats been plaguing me for a couple of weeks. So if you have a single rate, three color policer for instance. You specify a violate action, and Be defaults to equal Bc. Now, the exceed rule in this case says that if the packet size (in bytes) is < Be, it will pass, the exceed action will be…
-
Bc and Be
-
BCMSN and Wireless
Hey guys. Had a question. I'm finishing up my studies/reading for the BCMSN exam book. I have a pretty good grasp on most of the topics but right now i'm in the wireless section of the book. I've read before that some people felt like that the cisco press material really did not prepare you for the exam. Has anybody had a…
-
Secret to BSCI
After my miserable experience of failing the BSCI 3 weeks ago (after 5 months of study) I think I found the one thing that will push me over the top: flash cards. My weakest area on the test was multicast and BGP. So far I have created a set of about 50 detailed multicast flash cards with verification commands, concepts,…
-
Multi spanning tree (MST)
Can some one confirm this for me please. In the digram attached there is a MST region with two instances (three if you included the IST instance) I only have two switches configured and there running configuration is spanning-tree mst configuration name Aaron revision 20 instance 1 vlan 1-49 instance 2 vlan 50-100 in my…
-
CIPT2 - Thoughts
Well, I passed CIPT2 today by the skin of my teeth. I was happy to pass, but I felt really dejected after leaving the testing facility. It was the most brutal of all of the tests that I have sat so far. I guessed on about 8 questions I would say. Immediately after the test, I cracked the CIPT2 Authorized Self Study Guide…
-
CCVP Hardware Lab
Hey all, Great forum you have here. Really loving the info. I had a quick question. I am currently CCNA, and CCSP certified. I just scored a new job and as such need to get my CCVP. I had a lab previously that consisted of 2500's, 2950's, etc but sold that off as it really didn't cut it after ccna. I am now building a new…
-
Technology White Papers
How many people use these in there studies? I have been struggling a bit with RSTP, in particular how BPDU's flood the network during different types of topology change. And happened to come across these. Spanning Tree Protocol Technology White Paper - Cisco Systems I would say the majority of my learning material comes…
-
Private VLANS
Can you configure a switchport that is connected to another switchport as promiscous mode. I have two 3750's and I am trying to configure a private VLAN's on one of them them but whenever i configure a trunk port leading to another trunk as promiscous, I start geting a native VLAN mismatch messages. are you only supposed…
-
Cheapest possible BCMSN lab.
I need it. I havent passed BSCI yet but I already started studying for it. Im a little burned out about bsci and still dont feel comfortable to take the exam, but cant also find the strength to study mad hours since i feel i know all the stuff. I just not exam ready.... Suggest the cheapest group of switches that would let…
-
Do I get a CCNP # ?
Hello guys, I've searched the forum and the net for an answer to this question, but couldn't find a good one. Just got my CCNP certification after passing ONT yesterday. My cert. is confirmed and the paper kit is on its way. I know my CCNA #, but is there a corresponding number for CCNP, so I can put it on my resume.…
-
642-661 BGP recommended training????
Hey Guys, My company wants me to get the CCIP ASAP, so well they expected me to do an exam every 2 months and so.... first one is BGP then MPLS then QoS. I have books for MPLS and QoS, but i was looking around in cisco marketplace and didnt found a book dedicated to the BGP Certification for the CCIP Track, can you…
-
Net-flow data capture
Hello, I'm trying to capture net-flow data on a vpn router 1811 to be exact. And I'm getting nothing "0" from this router. The code is 12.4. I called support and there saying it's our vpn concentrator is a cisco asa running 8.0(3) code. My team of engineer are blaming the remote router. I'm leaning towards the asa, b/c…
-
GLBP help.
Ok I am missing some thing here. Router(config-if)# glbp 10 weighting 110 lower 95 upper 105 what exactly do these different values mean? I understand the weighting system in terms of load balancing packets. And how tracking objects can affect it. This is how I under stand it. The first value is the starting weight? then…
-
Bsci-passed
Hello all, passed bsci today in first attempt ( this was my first cisco exam, not ccna certified yet )... 950 score.. material used. authorized self-study guide. studied for 2 and a half month... did all labs of lab portfolio... 2 times questions/answers and mcqs of Official certification guide by brent stewart. thats…
-
OSPF: DR Election
I'm trying to recall how DRs are elected. Is this right? If the priority has been set higher on router R, R will win the election. Else... If the router-id command has been used to set the RID higher than the others, it will win. Else... If the loopback interface has been given a higher number than the rest of the routers,…
-
BSCI Authorized Self-Study Guide Question
No, I am not going to ask what is the difference in this and the Certification Exam Guide. :D What I want to know is what is the difference between the 2nd and 3rd editions. They both cover the 640-901 exam and have the same authors, but there is about a $40 difference in the price and the 3rd edition is 2007 while the 2nd…
-
I'm an addict....
Buying equipment is addicting!! I've started on my home lab and have picked the following up in the last week. 2x3550 POE with SMI (upgrading to EMI) 2x2620XM with WIC-1DSU-T1 2511 2620 with NM-4E and two WIC-1T's (part of the package w/ 1 switch and 2511) Looking at getting two 3640's with max mem or two 2651xm's (leaning…
-
3550 problem
One of my 3550's booted up the other day into switch: The flash system had an IOS on there but for whatever reason it wouldn't boot. So i'm now trying to xmodem a new IOS to it using hyperterminal. I start the xmodem process but nothing happens like there no ............. showing the progress or anything like that. The…
-
Failed BSCI - First Try
Studied for 5 months, have Cisco Press (Stewart), CBT Nuggets, Lab Portfolio and a darn good lab. Not sure what else to do. Was killed on BGP and Multicast. Is it worth it to buy the Doyle book (Routing TCP/IP) or perhaps the authorized study guide by Teare?
-
BCMSN = Down
I have the TSHOOT scheduled for the end of this month (just before the beta ends), and then I should be done with the CCNP(or at least I'll get a look at the TSHOOT)! Though I guess I won't get the results until the end of April..... This one was significantly easier than the BSCI, but of course the test environment…
-
OSPF Cost question
I have a hub and spoke frame cloud setup. The clockrate is set to 56k. I run "ip ospf int s0" and the cost is 64. Why is it 64 when it should be 1785 for a 56k line?
-
Bcmsn enquiry
Hello everybody in the forum, am ccna certified and am preparing for bcmsn, i want to know if my bcmsn will still be regarded as valid after july 31st(if i take it). And does that mean i will only need to take the route and tshoot to become ccnp certified ? Pls i need your help ?
-
Tshoot beta - the deed is done
Hey everyone, I just got back from taking the 150 minute TSHOOT Beta exam. I can say it is pretty interesting. I'm not sure what type of information I can give. But, all I can say for those of you that are going to take it is know "everything" of routing and switching, layer 1, 2, 3. Study up on every single thing that you…
-
Starting CCNP, which way to go ?
Dear all, after nailing LPIC-3 (see my other thread) it is now time to focus on Cisco again. I used to be a CCNA (expired early 2008 ) and I always wanted to take the step up but there have been some obstacles in the way (my father died, I lost my job, etc.) Now I'm back on track with a good job and a boss that has given…
-
Ospf with access-list question
Hello to you all Cisco gurus. ^^;; I have question on debuging with unused access-list?? I was reading the "CCIE Troubleshooting IP routing Protocols" on OSPF not forming neighboring relationship. and one of the possible reason is due to access-list. There are two routers directly connected and has loopback 0 to simulate…
-
BCMSN PVST or RPVST
ok this is the switch output from my switch at work and as you can see the spanning tree mode is PVST under 'show span vlan 217 sum' but if you notice under 'show span vlan 217' command i see P2P Edge ports. aren't P2P Edge ports supposed to be the ports on the switch running RPVST with portfast enabled. I do have portfast…
-
OSPF challenge
I have an scenario where i would like to send traffic from one vlan to one "normal" route and the other vlan to the longer route using OSPF. if the longer route fails i'd like to send the traffic to the normal route i dont know if any one seen something like this. there are a few routers involve this is a cisco 3570 and…
-
642-661 BGP recommended training????
-
BSCI Tomorrow
My first attempt at the BSCI exam is scheduled tomorrow, and in reading this forum it seems like most people fail their first attempt needless to say it makes me a bit scared! Any advice for nailing this thing on the first try? And to those who passed on the second try, how did the first attempt change your approach? For…
-
Not able to ping inside interface of pix from router(directly connected)
Hi, This is a Lab on gns3 I have just connected two devices router and pix I don't know why it is not pinging from both side as they are directly connected Please refer the output below and help. Is it some bug in gns3 or do i need to do some more configuration on pix. Routers Interface Ethernet0/0 10.1.1.1 YES manual up…
-
Ethernet MTU - size
Hello, I've noticed on the config 10Gig link MTU is 1998 or greater then 1500... Why do we need to change this value to a greater one? and why packets with MTU 1998 don't get dropped ? What happens if the packets have the DF flag set ? What packets have a DF flag set? Thanks,
-
Ethernet Extension Service
Well now. Firstly, I didn't know where to post this. This really is a design question I am asking, and I am just looking for some opinions on where to go. Here's the scenario. We have recently opened a new warehouse (and closed several others) and at the moment it is running on a cheapy ADSL2+ LLU, IPSec VPN. It works, but…
-
I love dynamips/dynagen
while im unemployed and have lots of down time I will be studying for the bgp exam. I want to say that I love dynamips. that is all.
-
VTP Question/Clarification
Can anyone tell me if this Boson exam question/answer is flawed? It seems to contradict the info shown on page 89 (right next to Key Topic) of the CCNP Switch Official Exam Cerification Guide. Have I been staring at this book and exam sim for too long or should the correct answer actually be selection A? I just don't see…
-
bsci best book to pass exam
what is the best book to start with for the bsci exam as i have seeing a bunch on amazon. cisco press 3rd version, 4th version, 5th version. I just finished my ccna security exam and want to start the bsci and finish by july. Also will finish bcmsn too. i found all these.…
-
Port based authentication
Question, In the certification guide, it states that for port based authentication to work, both switch and Clients PC must support 802.1x. if only the switch is configured to use it then the port will remain in the un-authorised state and not forward traffic. is this not incorrect as a port set up with 802.1x can still…
-
BCMSN Spanning tree Scenario
My topology has four switches, A, B, C, D. and C becomes the elected root for all VLANS (Lowest MAC), default priority on all. I issued the following command on switch D spanning-tree vlan 150 priority 20480. Which immediately made it the root I went back to SW C (root switch) and issued a command spanning-tree vlan 150…
-
Stub Router
Folks; I am having a hard time understanding a Stub Router topology. On the provided link Google Image Result for http://www.cisco.com/en/US/i/100001-200000/130001-140000/135001-136000/135835.jpg is the stub router the center router with multipule connections or are the six routers at the bottme called stub routers? thank…
-
CCNP SWitch
Having been going over the old BCCMN topics over the last few week, I thought I would get the SWITCH official certification guide to flick through before I took the exam to make sure I havent missed any major topics. (plus work paid) To be honest its seems to cover pretty much the same topics. There is still the basic QOS…
-
I know this is a Cert forum but..
-
mrinfo - details
Hello all, R1#mrinfo 24.24.24.1 [version 12.4] [flags: PMA]: 192.168.1.1 -> 0.0.0.0 [1/0/pim/querier/leaf] 172.16.102.1 -> 172.16.102.2 [1/0/pim] 172.16.103.1 -> 0.0.0.0 [1/0/pim/down/leaf] 172.16.13.1 -> 0.0.0.0 [1/0/pim/querier/leaf] 24.24.24.1 -> 24.24.24.2 [1/0/pim] What does it means those flags : PMA ?…
-
VG200 question
I was just wondering why someone would want a VG200 instead of, say, a MC3810? Cost is a factor, probably, but other than that what are its advantages? What can it not do?
-
Does GNS3 PIX emulation allow webvpn?
For some reason I can't get it to work on mine
-
Wording question...
Page 10 of the CCNP ROUTE 642-902 Official Certification Guide reads "Does not deploy the configurations off-shift". Any idea what is meant by that?
-
Ont->qos
Guys, Based on your experiences, how much additional information is in the QoS exam that was not covered in the ONT? I have already ordered the Odom book for the test, is there any additional materials you all would recommend?
-
BGP: RIB-Failure in eBGP
I have this scenario where I have an eBGP routers configured: R1: serial 0/1 192.168.1.1 255.255.255.0 loopback 1 1.1.1.1 255.255.255.255 R2: serial 0/2 192.168.1.2 255.255.255.0 loopback 2 2.2.2.2 255.255.255.255 loopback 22 22.22.22.22 255.255.255.255 They are directly connected thru their serial interfaces, and R1 made…
-
MPLS Connection / Security
We are in the process of connecting to other branches in europe and USA through MPLS. We were thinking about connecting through the ASA 5510 using a subinterface on DMZ. Our corporate office suggested connecting the CE router directly to the core 4506. Each branche have their own security policy. Is this a safe way to go?
-
Lab question for new Route test
I just passed the two track test path for my CCNA and I am looking to start on the CCNP. I am going to work on CCNP Route 642-902. I have the Odom book for the exam, as well as a the cbt Nuggets for the old BCSI test which I was going to use for some extra knowledge on some of the crossover topics. I also have three 1720…
-
CCNP Wireless?
Why is there no dedicated CCNP Wireless section on here? This is something I've always wondered about. After all the track has been around for a while now. Is it just that people on here aren't too keen on the track? I think I've read somewhere on here that expert (and perhaps even pro) level certifications for wireless…
-
3550 power supply
One of the 3550s in my lab has died. i hooked another power supply up to it from another 3550 i have and it powered up so it looks like the PSU is dead.... Can i buy these from somewhere? its a lite-on PA-1101-1... P.S, not talking about the power adapter... talking about the power supply... the thing that is inside the…
-
I need a Cisco Phone that supports SIP? CP-3911? CP-7912G?
Hi, I recently bought what was supposed to be a new ATA186. I read that it supported SIP and SCCP. Hours later and a 100 mile drive later, I found out that it supports only SCCP and to make matters worse you would need a software engineering degree to change it's locked firmware. So they are refunding my money. They are…
-
TSHOOT Exam Topology
Hi guys, Here it is guys, the real topology in the new TSHOOT exam. https://learningnetwork.cisco.com/thread/10965 Enjoy it.
-
OSPF ABR summarization - Something Wrong
Hay guys; I am working on OSPF and I have prepared a lap to practic the summarization and redistribution. So, I have the ABR between Area 0 and Area 1. In Area 1 I have the networks 172.16.1.0 through 172.16.5.0 attached to the Internal Router R1. My problem is when I am trying to summarize these Networks using…
-
Network Mapping
I'm tasked with needing to create a map of our current networking scheme where I work, and it is been poorly documented in the past. I'm trying to fix this. I currently run ubuntu on this machine, but could get windows running if needed. Is there a tool I could use to give myself a rough graphical network map? So far my…
-
PLEASE HELP : CCNP BSCI Exam Material
I just took my ccnp bsci and failed it. I was sure I would be able to pass it as I had studied hard. but something went wrong. My current exam material are as follows: CCNP BSCI official exam certification guide: fourth edition. along with CBT NUGGETS from cbtnuggets.com and I use GNS3 for my labs IS THERE ANY SOLID…
-
2950s good for CCNP
I have 2 2950s, just 2950s. I have one 2950C and one 2950G-48-EI. Will these be good do do labs for finishing CCNP? Last year I had everything in place to do it but between all things going on never worked through the final stuff. I had finished packages for the BSCI and BCMSN and am finalizing everthing to sit for those 2…
-
Password recovery/restore to factory PIX 506e
Hello, I have a PIX 506e that I would like to set up however I dont remember what the password is. How do I go about restoring the PIX to factory default? I've been looking though the internet but have only found out how to do it from the command line once your logged in.
-
no e.164 register for 911 services
Hello, I read this in a CVoice study book: Note. When dealing with services numbers, such as 911, make sure to include the no e.164 register command. Q.1 Why do you have to do that? In addition an example is set: Router(config)#dial-peer voice 911 pots Router(config-dial-peer)#destination pattern 911…
-
question about certification cisco
HI guys am a new to join in this side am form africa and i need ur advice and inform my about . what it mean ccna ,ccnp in the US get this certification after university it is important to work in the US with university cert.... pls inform me thanks
-
rip route advertisements
hi! in a BSCI lab portfolio, under route optimization section there is stated: i dont quite get it, where does it come from? i made a lab and it also showed, that rip does advertise routes on the same major (classful?) network with different subnet mask...
-
CCSP/CCNP lab
I have looked at the Faqs here and read some other things online and I think I have decided on my next lab purchases. My goal is to complete the CCNP and CCSP before I leave my school ( so in about a year and a half) . This thread will probably end up being used for tracking and hopefully be helpful for some folks here.…
-
Voice translation patterns!!
So I figured because there hasn't been alot of activity lately I would start posting stuff and see who is the first to answer the question.. Q1. What does this voice translation pattern do?? ! voice translation-rule 3 rule 1 /^\(\*66\)\(.*\)$/ /\2/ type any international plan any isdn rule 2 /^\(\*55\)\(.*\)$/ /\2/ type…
-
best study books for 642 504 snrs
Hello, I am currently looking into books for the 642-504 exam and reading online that alot are out of date and wont help you pass the exam. Is the cisco press book any good for this exam. Also, what books are recommended. thanks, Josh
-
Redistributino from BGP into EIGRP
I am unable to redistribute BGP routes into EIGRP. The router where the BGP routes are being learned for some reason is not redistributing the BGP routes into EIGRP. My configs are as follow: bbrtr1>>>>>> where I am learning one BGP route 10.10.10.29 bbrtr1#sh ip route Gateway of last resort is not set 10.0.0.0/8 is…
-
BSCI 2nd Tray 2/23/2010 Today = PASS!
Well, Firstly, it would be nice if I wasn't so excited I could spell TRY right, LOL. My 2nd time was a charm with the BSCI. My signature wasn't updated my 2nd attempt was supposed to be 2/6/2010, but we got hammered with like 36 inches of snow, so it was cancelled, then I rescheduled for the following Saturday, we got…
-
gre over vpn question
Hi, I have gone through several items on the net regarding gre/eigrp/vpn. I just wish to verify if this setup will work if i have an acl with a permit gre any any and link this acl with a crypto map say testcrypto and just apply this crypto on the wan interface and not on the tunnel as specified by cisco tech notes. Thanks.
-
PVDM3 Help!
Hi Guys Sorry to be posting on this forum for something as silly as where can I get. But I don’t know where else to ask Basically Cisco UK and there rubbish main shipper have managed to spanner us again we have just Purchased a 2911 for cme spec'ed with an E1, FXO, FXS, and a Dual port BRI CUE. When shipped to us it comes…
-
ONT and the Bandwidth command
Hi All, I need to clear something up in my head as the cisco Student material is quite frankly shocking sometimes and leaves a lot of questions unanswered / unclear. Im currently studying for the ONT (Passed the BSCI (Brutal), BCMSN (easy IMO) and ISCW (which was bloody harder than i thought it was going to be) so im on…
-
Adding switch to existing stack
Hi, we currently have two 3750s in a stack and wish to add a third. I have made sure that the IOS on the new switch is the same as the existing switches and have entered this command on the current stack switch 3 provision ws-c3750g-24ps So currently there are two stacking cables in use. Port 1 on switch1 goes to port 2 on…
-
BCMSN Passed!
Finally got round to booking last week and passed my first attempt on Monday with 848. I honestly didnt think I had passed. I found the exam really tough, even though I have put in heaps of study time and training. I scored really well (100%) on the STP side but only 50% on the voip side, which is an area I know I need to…
-
Starting with MPLS
Hey everyone, its been a long long time since i read about MPLS i can hardly remember and never used it before, i would like if any of you has some basics labs i can do on GNS3 or some pointers cause i need to learn this fast for the job at least configuration/troubleshooting i mean i realize i need to read and all i…
-
Cert Guide vs Self Study Guide
Hi all, Can someone give me an insight into the differences between the Cert Guide and the Self Study Guide? I've read the descriptions on the Cisco Press web site but it's not clear. As far as the new ROUTE exam is concerned, will "Implementing Cisco IP Routing (ROUTE)" be the Self Study guide? (Due out in June)? Thanks.
-
Starting with MPLS
-
OSPF routing problem
Just thought I would throw this out there, as I am not getting far with it. I have two WAN links that I can get to my branch sites with. I want to treat these as equal in my internal network, so that I can route traffic over both, so I want both routes installed. The branch routes are learned by my WAN routers via BGP, and…
-
Lab Manuals
Has anyone heard anything about new Lab manuals for the New CCNP test? I was considering just picking up the lab manuals for the old test because I haven't heard anything.
-
Estimate how many labs you've created for the CCNP!
I just happened to look at my folder where I keep all of my GNS3 labs for my BSCI exam, and I noticed that I'm nearing about 100 labs that I've created so far and believe I'll be at about 150 labs once I finish the lab portfolio. How many labs did you guys create on average before you completed your CCNP or created so far…
-
CISCO 2509 issue
HI, I was wondering if any one in the CISCO experience had come across this problem. I have a 2509 router (terminal server). I have never had it working, and i wondered if any one had experienced these problems When I set it up I can get the opening connection up for each of the lines. But then it just hangs and does…
-
Translation Rules/Profiles and TON
Have had my PSTN cloud working for about a week. I can at least get calls between my sites via E1/T1 PRI. Basic config was not that bad, till you get to ANI, DNIS and Translation Rules/Profiles. Managed to troubleshoot called/calling numbers by looking at the ISDN q931 messages to see what was coming into the cloud. This…