-
purpose of redistributing connected?
Why would you redistribute something connected, why not use the network command?
-
life after ccnp
ccnp natural progression I was wondering what people do after ccnp. I still need 3 tests, but what do most people do after ccnp. I know that ultimately it is the ccie, but what about ccip and ccdp? Does it matter much in the job market if you have ccnp+ccip (or ccnp+ccdp) vs just ccnp? Does ccip or ccdp prepares you more…
-
Does CDR record time spent on hold?
OK we have a CCM 4.1 environment, and I have been asked to see if we can find out whether or not we can gather data on how long people spend on hold waiting to speak to someone. I have CDR turned on, I wonder if this will do it? Thanks
-
Test Router/Switch Vulnerabilities
I'm not sure if this is the right forum for this question to be in, but I assume I will be guided accordingly... Is there, or what penetration tools are available that would allow me to run against routers or switches, or even a pix firewall to test for possible security vulnerabilities? Or something that says, well you…
-
Java Update breaks ASDM
So I updated Java today and then shortly after had a need to get into the ASDM. Upon logging in to the ASDM launcher I get an error message: "Unconnected sockets not implemented" So there it is. If you are using JRE 6 Update 10 or Update 11 you may have issues - I tried both. You'll need to back up to JRE 6 Update 7. Hope…
-
AAA with cisco network assistant
I have AAA setup everything works except i cant get in with CNA. I have these commands entered into the 3550 switch aaa authentication login web group RadiusServers aaa authorization exec web group RadiusServers local ip http server ip http authentication aaa login-authentication web ip http authentication aaa…
-
ACL for SYN Attack? Wha? (ISCW)
I ran into a really tough practice exam question over the weekend. Unfortunately, I didn't get the exact question written down, but it was basically showing a static ACL and asking what type of vulnerability the ACL was configured to protect against. Since the ACL showed a "deny ip" statement for the address range of the…
-
ADSL configuration.
Hello everyone, i am just reading some cisco documentation to get a headstart on my ISCW studies.. I was looking at configuration for Cisco ADSL config... and wanted some clarification to see if I am understanding this correctly. ok... When using the "ISP provided dsl modem" connected to the ethernet port of a cisco…
-
BSCI OSPF true or false
Source BSCI self-study guide p. 308. "True or False: OSPF design requires that all areas be directly connect to the backbone." I answered false, because you can use virtual link, book says it's true. what do you guys think, this is a badly formulated question?
-
IP Helper
Ok I have a CUCM at the core office and have created a new vlan and seperate dhcp scope to cater for the voip phones. In the core office I have no problems with phones picking up the correct address(Vlan) and all works fine. In the branch office the phones are picking up a local dhcp address, however the phones do register…
-
Question about Pass-Through faxing
I'm learning about all the fax protocols for the Gateway/Gatekeeper exam (this fax stuff is my weak point, so I'm tackling it first), and I'm looking at Cisco pass-through right now. My question is - why would someone want to use it verses, say, T.38 fax relay? This one is allegedly the standard to use. Pass-through is…
-
eigrp stub
i have configured eigrp stub on my spoke routers i was expecting to see my spoke routers only with connected and default route but not i saw the all networks of the other spoke routers what is the point just to dont respond to query ?
-
ONT Tomorrow - Could be another CCNP added to the ranks :)
Hey guys, As the subject states hopefully tomorrow I can put away ONT and bring this fruitful chapter to a close!!!! 10.30am WDST will post my thoughts and result after the exam :) Cannot wait.... completing final revision today and I'm quite happy with where my QoS\WLAN knowledge is at... Going to start reading the QoS…
-
port channel numbering
I have noticed that in the cisco BCMSN lab book and through my own expierementation that the port channel group numbers don't have to match on each switch. For example: switch A has ports fast eth 0/1 and 0/2 connected to swtich B ports fast eth 0/1 and 0/2 A trunk has been created. And I was able to get ether channel…
-
iscw SDM version
Hello all! I'm really studying for my CCNA, but I recently used CBT Nuggets to help me config an Easy VPN Server at work. Now, I haven't actually gone back and confirmed this but it seems the wizard Jeremy used isn't exactly like the one I used. I remember Jeremy talking about Remote Route Injection and that it was…
-
BCMSN Passed !!!
hello everyone, just got back taking the exam... got a 942... thats a good score.. man i did pretty bad on wireless with a 77% in it.. man, i thought i new my wireless. Guess i didnt study hard enought... But all in all a pass was met.. Thanks.. The ISCW books is scheduled to be here monday ! cant wait !
-
802.1x and mapping home folder
Hello I have 802.1x configured on our wired LAN and it s working fine. However, users cannot map their home folders. When I log on for the first time, the home folder doesnt show up and if I log out and log on again, the home folder shows up. I think this is due to some timing issues where the drive is mapped before the…
-
Sitting BCMSN this Thursday Dec 4th (EDIT: PASSED)
Hey guys. Giving the BCMSN a go on Thursday. It's been approx 5 1/2 wks since my BSCI pass. I got through the BCMSN material relatively quick since my job now involves about 75% layer 2 stuff and 25% project management. I'd say I'm feeling confident, but at the same note, will still have to take my time and pace myself on…
-
802.1x Help
Greetings, I was hoping somebody in here has some experience setting up dot1x authentication on a wired network. I have successfully configured 802.1x in my lab environment but I have another problem. Is there a way to configure 802.1x authentication before logging into Windows? I have set up 802.1x to work using smart…
-
intervlan offical BCMSN question/issues
Has anyone completed the offical lab book for the BCMSN from cisco? I am going the first intervlan routing lab from chapter 4. It is two access layer switches with one switch trunked to a router and that router is connected to an "ISP" router like this: ISP (router) <----> GATEWAY (router) | access layer switch1 | access…
-
Voice Troubles (3825 and NM-2CE1T1-PRI)
Hi and thanks in advance for any assistance rendered. I've got a 3825 running 12.4(9T) with advanced IP services and security. Modules/vwics installed are: 1 x NM-2CE1T1-PRI (controller T1 1/0 and 1/1) 1 x 2 port FXS vwic (voice-port 0/1/0 and 0/1/1) 1 x 4 port FastEthernet Switch vwic (fastethernet 0/0/0 - 0/0/3) 1 x 1…
-
Spanning Tree - BPDU Gaurd + Hubs
Hi All, Im slightly confused about this feature, my understanding is that if you have a port with portfast enabled and connect a switch downstream, BPDU Guard will actively block the incoming BPDU's and put the port into err-disabled state. However i was wondering if this feature would also protect the port with BPDU Guard…
-
WAAS Resources?
Ok, so this might not specifically fall under the scope of CCNP material, but I was wondering if any of you out there support enterprise scale Cisco WAAS deployments and, if so, what kinds of resources do you use? I'm working on a project involving our first deployment of WAAS on our network and I'd like to do it right the…
-
Question on Redistribution - BSCI
I'm studying for the BSCI exam using the Cisco Press Official Exam Certification Guide. This book really irks me sometimes because they don't proof read anything they put in the Cisco Press books apparently as I experienced the same problems with the CCNA books. here are my questions in regards to redistribution: Do you…
-
police cir and police rate commands
-
QOS >= ONT?
Looking at the QOS and ONT tests exam topics I’m thinking that there is enough overlap to study for both, and sit them on the same day. Is this a realistic goal or insanely over optimistic?
-
VLAN security
If a computer is connected to a switch port with access VLAN 10, and the computer spoofs a packet with an 802.1Q header of VLAN 20, as this packet enters the switch port, will the switch drop the packet because the VLAN is mismatched? I'm just trying to get an idea if the switch has basic security built in like this.…
-
day of a voice guy
Come to work about 20 min late as usual. Not intending on taking any calls for a while. So my Karma cathes up with me and the 1st call is a outtage. Now since Phones are tied to them I have to support them, but we are not network support(even though we are secretly moving that way). So I ask the guy what is the IP of the…
-
Study guide
I am thinking about some study guide for my ISCW exam. Whats the general consensus about the guides at thebryantadvantage.com? ideas/suggestions?
-
CT cracks open the BCMSN...
Let the BCMSNing begin. Hopefully be ready to knock this one out in about 8 weeks....
-
Study method ideas
I'm just curious as to how others implement their study methods. Outside of lab time (which is best), what methodology do you use to prepare for your certification tests?
-
Access router 2511 help 2nd async 9 16 config?
I cannot get my second async ports to reverse telnet. What am I doing wrong. The first 8 ports work the bolden ones below do not work worth crap. I have a 2511 access router. the first 1 8 ports telnet fine. the second 9 16 do not at all. How do you configure the 2nd 9 16 ports? what am I doing wrong? and how to test to…
-
6500 issue
Hi Guys, Hoping someone could help me with an issue we are mysteriously having on our 6509's at one of our offices. This happened out of the blue and was not a result of any work going on etc. Firstly, there's 2 6509's (SW1 & SW2) with the usual vlan routing, etherchanel, hsrp etc running eigrp. however yesterday out of…
-
authorize self study guiders vs official exam certification
Which is better the? The authorized self study guides seem to be about 100 pages longer on the average. I guess they just break things down more for those that need it? I am currently using the offical exam cert guide for BCMSN, and it seems fine.
-
when to use OSPF network type - p2p or broadcast ?
Hello All, I need help. Do you know when to use OSPF network type - point to point or broadcast ? In my company where I work, Core routers 6500s are connected directly both in LAN and WAN. LAN is using ethernet cable and WAN is using leased line. For Layer 3 Routing, Alll of the routers are configured using point to point…
-
2611XM 128MB = VIP4-50 128MB?
As you probably know the CCNP BSCI books recommend 2611xm's with max memory as an alternative to the expensive 2811s. I've actually borrowed 2811s from work but given I'm thinking work and I will part company soon I'm looking to the future. Does anyone know .. are the 128mb memory chips for a 2611xm the same as the chips…
-
Switch goes down with cable between 2 ports
At work, a dude tell me that if he plugs a unintentional patch cable between 2 ports on the same switch in the save vlan, the switch goes down. I don't know all of the topology of this network but I captured run and interface config. I will suggest to disable the unused port, set the switchport mode access and disable the…
-
C3550's with EMI Image on them
Got an offer for 2 of them... this enough for BCMSN... Should be fine, but just double checking before I lay out a ton of cash!
-
Darn AMD Chip - ARGH!
Old PC: AMD Athlon-X2 4800+, 4gb RAM, Win2k3-R2-x64 SP2, all un-necessary services turned off. Dyn On the old PC, I have done everything possible to run the MPLS TE 2.5 lab from gns3-labs. No matter what I try, or how I idlepc the suckers to death, or which version of the 3640 IOS I use, or which version of…
-
Cat3750... multiple native vlans?
Hey techies. Just got asked something that I've never even heard of before... I'll try to describe our setup. All of our servers are dual homed... one to production switches and the core, the other to a backup switch stack, which connects to the backup array (completely layer 2 and non-routable). The native vlan on the…
-
off n running...
well after a bit of slog with the boss I've finally got my voip kit in at work.... So I had the pleasure of working with a double IE on setting up the callmanager and gateway today .... seriously impressed with the IE and his knowledge, I've worked with a couple lately and am always amazed at there knowledge v mine and…
-
OSPF DR- DROTHER exchange
setup in GNS3 BDR .1/25---SWITCH--- .2/25 DR | |.3/25 DROTHER 3 routers share a common subnet 10.0.0.0/25 subnet Lo0 DR: 192.168.254.84 Lo0 BDR: 192.168.254.83 Lo0 DROTHER: 192.168.254.82 Situation: I configured first the DR and BDR (interface,loopback and ospf config) example of DR config interface Loopback0 ip address…
-
BCMSN Passed
Tested on the BCMSN exam today, and passed with an 864. On to celebrate with a good dinner and maybe some amazon browsing for new books :) Any ideas besides cisco press books? I can see that both ONT and ISCW dont contain self-study guides, so have you guys used anything else to make up for it?
-
ISCW ATM - Do I just have an old practice exam?
I've gotten to the point (FINALLY) in my ISCW studies where I am trying to gauge where I need to focus my efforts by taking practice exams and then going back to study further the topics I'm not acing. To that end, I'm starting with the practice exam that came with my Cisco Press ISCW book. However, it seems like I'm…
-
CCIP soon
I've been studying a lot for the QoS exam as a part of the CCVP track but realized that I'm only two exams away from the CCIP (Composite and QoS) so I'm going to handle that prior to the voice. I'm about 80% ready for the QoS exam and BGP/MPLS shouldn't be too bad. Hopefully I will have the CCIP by the end of the summer.…
-
Bandwidth Limitations
Hello everybody, I would like to limit the available BW on a client. I know it could be done with QoS on the server-side, but how do you do to a user? Thanks
-
Damn Aspera- Is eating up BW
Hello Everyone, We found out users are running "Aspera" , which let's you adjust TCP window size and other parameters. I'm looking to cap their BW on the switch port . Does anyone know of a protocol?
-
practice exams
hi, Are there any BSCI practice exams that are NOT **** papers?
-
point to point frame-relay
is it necessary in point to point to configure sub interface point to point both side in frame-relay network or just one side is work without problem
-
Default port states
I have a lab work book for BCMSN and it states that dynamic auto should be the default port state for switches (3560 and 2960) I have some 3550 and 2950 and they default to dynamic desireable... Is this a fundamental difference between the two switch types? Thanks
-
Composite Exam
Has anyone taken or know of anyone who has taken the Composite exam? What can you tell me about it? Good way to go or not? How many questions? Easier or harder than doing BSCI & BCMSN seperate? Any input would be appreciated. Thanks
-
Dial Planning help
Dear Guys, Got a new pilot#, received 100 numbers. My box is Cisco AS5350 running IOS 12.4T. Say my new number block is: 1234621-1234721 How can i configure the dial plan under dial-peer? Did i miss something in my config? Im stuck, need help. ! dial-peer voice 1 pots destination-pattern T translate-outgoing calling 6…
-
CCNP renewal
Hello Techexams! I have my CCNP renewal coming up and want to ensure my plan for renewing it is worthwhile. I visited Cisco's section on renewals: http://www.cisco.com/web/learning/le3/learning_about_recertification.html#ccnp_ccdp_ccip_ccsp_ccvp The 642-524 SNAF exam will reup my CCNP? It just seems too good to be true!…
-
Passed ONT, but should I worry?
I passed ONT this afternoon with an 800 scratch-by....but the centre was some what sketch, no photo was taken even though I believe that's the Cisco/Vue rules now? I also noticed my score report says "Preliminary Examination Score Report" and not the typical "Examination Score Report" that I normally get. AND, I checked my…
-
ISCW done... on to ONT
I worked hard on this one in the last two months. Someone mentioned that the CCNA:Security was a good prep for this exam... it was. Quite a bit of overlap. Finished with a 901, despite not getting to finish the last two questions. Implement basic teleworker services - 87% Implement Fram-Mode MPLS - 85% Implement a…
-
QoS Traffic Generation
So I am taking a gander at the other Cisco certifications as I am not too far from getting my CCNP.. and I am finishing up the ONT right now. This exam is mostly QoS theory with very little implementation. I do much better if i can lab it out.. so i started to lab a few things out.. and I realized that I can type commands…
-
BSCI to BGP exam
As we all know, BSCI covers BGP topics. So how much more studying is needed to pass BGP exam? and what books do you recommend to study for that BGP exam?
-
Troubles purchasing off Cisco Press
Hey all, Almost finished my CCNP and wanted to purchase my CCIP\CCIE Written books.... But I've had nothing but trouble pushing CC purchases through the site.... keeps coming up with errors.... Anyone else having problems???? I've purchased with the same CC many times from Cisco Press before.... seems really odd... Their…
-
ONT -> QoS
So the ONT is fun.. and semi annoying as it is mostly theory and hardly any hands on..but the QoS 642-642 seems way more fun and obviously would have way more hands on. For those who have taken both the CCNP ONT exam and the QoS exam.. how much of a gap is there between the 2? I know QoS can get pretty hectic and nasty…
-
The Journey Begins...
I know this part of the forum is deader than Abe Lincoln, but I plan to make it my home for the next few months. I am not sure why I am doing this certification other than the topics interest me insanely. You see, I don't work at an ISP and don't deal with a whole lot of QoS/BGP/MPLS in my daily work environment, but man,…
-
Multicast question
Hey all, I've got a question in regards to Multicast operation and the operation of RP's in particular. I've got an extremely simple topology consisting of 2 switches and 3 routers (as seen below): http://www.box.net/shared/ex0qg9lnbj#1:21145254:222375280 R2610 is configured as the RP with the following…
-
NULL 0
Step 5: Configure EBGP Configure ISP to run EBGP with SanJose1 and SanJose2. Enter the following commands on ISP: ISP(config)#router bgp 200 ISP(config-router)#neighbor 192.168.1.6 remote-as 64512 ISP(config-router)#neighbor 192.168.1.2 remote-as 64512 ISP(config-router)#network 192.168.100.0 Step 6: Verify BGP Neighbors…
-
ipv6 so confusing in BSCI official exam guide
Anyone has alternative source to get less confusing information? I found one website thats helping me some, www.tcpipguide.com. Or do you guys find material in the offical guide sufficient.
-
STP topology change
I have been a bit confused over how long it taks to flush out the bridging table after a TC has been flagged by the root in a configuration BPDU. I thought it was shorted from 300 seconds to 15 seconds but here in the BCMSN cert guide It mentions the MAX age, why would the MAX age time be added?
-
Developing IP Phone services?
Not part of the CCVP track, but I guess this is the next (undocumented) step, apart from CCIE voice. Is anyone involved in this area? I'm looking at getting my feet wet and was wondering what kind of knowledge base you need to start making some headway. I've started by trying to get an ldap search working, and keep running…
-
6513 help with redundant supervisor cards
currently we have a 6513 that is running ios and is only being used as a big switch no routing what so ever. I need to upgrade the ios on it and also put an additional 720 supervisor card in for redundancy. We are going to use the new supervisor card as the active card this card is brand new from cisco no config on it at…
-
GNS3 issue
OK All i've done is the following: - Install GNS3 Add a single router (2621, 12.4 IOS) Started it Type some config RouterA#reload Proceed with reload? [confirm] Then I get this... 00:00:35 UTC Fri Mar 1 2002: Unexpected exception to CPUvector 0, PC = 0x801F6338, LR = 0xFFF037B4 -Traceback= 0x801F6338 0xFFF037B4 CPU…
-
how does it work CCNP and dead exams?
Hey ccnp gurus okay I understand that now that I have CCNA it is good for 3 years and if I take say BCSI and pass it extends it 3 years, and if I take BCMSN it extends it to that 3 years. okay what if by the time I finish BCSI and BCMSN the ONT and ISCW are expired. then what do I do? the first 2 are prerequists to the…
-
IDLE PC values anyone
hey GNS3 gurus.. anyone have any good IDLE PC values? thanks really need them, running 2600 routers with 12.4 ios and enterprise will these images idle?? thanks
-
2950 QoS for voip traffic
I was poking around cisco.com and found an FAQ on qos features supported by 2950s and I was confused by the last line of the following answer. why would you want to set the bandwidth of the strict queue to 0? This confused me so I went over my notes from my BCMSN text book and I wrote that you have to configure the lower…
-
packetlife contest
Packetlife.net is having a new contest. A packet capture is provided, and you must find out what date/time the cisco router thinks it is. I think OSPF Hello packet sequence numbers count from January 1, 1970 in hex. Can any guru's shed some light on this?
-
Cisco email
so, i passed my final ccnp test about a week ago. i stil have not received an email from cisco. how long does it usually take until you find out?
-
CCNP Begins...
Well I've just got back from holiday, and decided to start CCNP. Going to sit the BSCI in around 6 weeks time from now (Provisionally, at least) Here we go, then!
-
trying to remember BGP....
So i got a new job and i'm going back through my old text books to just refresh my memory a bit.. Doing some BGP stuff in dynamips with the following topology AS65100 AS65101 AS65102R1---------------------R2-------R3--------------------R4 R2-------R3 (there are two links between R2 and R3 for redundancy) EIGRP is running…
-
Passed BSCI
I got an 840 - not great, but not bad either. Only 4 weeks of study, probably 6 hours per day with Sunday's off. The dynamips helps a lot, since it allowed me to triple my available lab time. Wish I had 4 switches to complete my lab - sigh. What a pain in the butt!!!!!! Next up, BCMSN. Should be done by Xmas or so. ONT is…
-
Cisco Stencils- Empty slot covers
Hey, I looking for the covers to emplty slots on a 3800 router
-
Off Topic call Manager question
Ok so i have a friend who works for a company that has cisco call manager 6.1, she has a 7961, anyways just recently when she dials a portion of my number (and the phone pre-populates) recently dialed numbers it has "Call Ma" on the end of my number before the screen chops off the rest of the word. When she dials other…
-
Help. Difference between physical interface and controller?
I'm confused about the difference between a physical interface, such as Serial0/0/0 and a T1 controller, such as T10/0/0, and the relationship between the two. For example, based on the sample config below, I see the T1 controller config, and the Serial interface, which is configured with an associated subinterface, but my…
-
Advanced Reading
I want to go above and beyond what the CCNP books tell me (and also to get an insight into the CCIE) I think I managed to buy a 2nd edition of a CCIE book, but think this was a generic CCIE R&S book. Looking at Amazon, they're offering Routing TCP/IP Vol 1 and Vol 2, for £85 Worth it?
-
Cisco Visio Stencils- Slots Cards
Hello Everybody, I'm looking for NM-1T3 slot card visio stencil. I checked the site, but nothing seems outdated. Could anyone point me in the right direction. Greatly appreciated. Thank you
-
3640 vs 1720
Hi All, need an opinion, i was studying for bsci and ran into ipv6 with ospfv3 and long and behold only one equipment in my lab runs it. I have a few 2600s, 4700, 3620, 3640. so currently, my 3640 will run it, but I need to bump up the memory. anyway, before I invest in 1-2 more systems to run ospfv3 with ipv6, which would…
-
question about cisco 1751-V flash
Hi, Was playing with this router and have a few questions: here is the show ver output ================= 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) ================= so it looks like I only have 16mb of flash, but I read that "The Cisco 1751 router ships with…
-
redistribute static
if i have static route to my ISP can I redistribute this static route to my internal routers eigrp or ospf to make the router has a static route exit point to other routers
-
CTs take on BSCI
So, after about 10 - 12 solid hours of review today I think I'm going to schedule this test. I've reviewed a ton and labbed a ton this last couple weeks and I think I'm ready to give this sucker a nice swift kick in the junk. Wish me luck because I'm ready for some new subject matter.
-
switch CPU MAC addresses
just wanted some clarification on this one. Are all the CPU MAC addresses that are show as CPU in the 'show mac-address-table' command unique to the switch? when I do this command on my 3550 it has 48 CPU mac addresses and when I do it on the 2950 it has none but under 'show int vlan 1' it has a MAC address, is this it's…
-
Possibility of doing this self-study?
Was wondering if you think it's likely I could get my CCNP through self-study alone. Here's some background. 1. I currently work in desktop support and I have some networking experience, but on servers, not on switches. 2. I got my CCNA in 2006 through self-study with limited resources. I had no hardware and just one book…
-
changing administrative mode of a 2900xl port
For the life of me I can't figure out how to change the administrative mode of a catalyst 2900xl switch. On a 2950 I can do it with these commands: switchport mode dynamic <AUTO|DESIRABLE> Basically I can't get the 2900 to establish a trunk with a 2950 or 3550's. I can get trunks working between the 2950's and 3550's. I…
-
Last Exam Scheduled
Nov. 11th is the day. ISCW is the test. I have been using the following materials: CBT NUGGETS TRAINSIGNAL CISCO EXAM CERT GUIDE CISCO ACADEMY ISCW LAB GUIDE GNS3 I have to say out of all of the CCNP exams, I really like this one alot, maybe even more than the BSCI. I really like IPSEC VPN's and learning about the security…
-
prefix-lists
are these necessary with iBGP like they are with eBGP? All of our devices what use eBGP have massive prefix-lists, but all of our devices that use iBGP have very short prefix lists.... I don't know much about BGP at the moment so I am still trying to figure some basic things out. thanks
-
ONT - Integrated Service Model
What would be an example of QoS that is in the Integrated model? In Cisco Press ONT Exam Cert. Guide by Ranjbar: So does that mean LLQ is both Integrated & DiffServ? What would be another queueing/QoS feature under Integrated model? Thanks for any help![/quote]
-
You know you spend too much time on the IOS when....
You try typing on the computer, and use the [Tab] key to finish your words. "I need to goto the st[Tab]" "I need to goto the sto[Tab]" hmmm. Oh..right "I need to goto the store" Or you forget how to spell something, and you use the context sensitive help '?'. It never works in real life
-
CWWLSE-1030-K9
CWWLSE-1030-K9 Would this be sufficient for the CCNP track? I know lots of the guys think a wifi controller is not necessary for these exams... But part of me wants to leave no stone unturned. Thoughts/comments please?
-
New IT Daddy Blog - IS ALMOST READY!
http://CCNP.ITDADDY.NET Hey CCNA/CCNP wannabees! I am starting up my new CCNP blog. I will leave my old CCNA blog up (I like that old! hahha) and running. I love my new look and I plan on 1. writing much better 2. spelling much better 3. displaying my labs in a better more professional fashion. Want to thank that famous…
-
640-553 IINS
What are your thoughts on this exam? Seems to me Cisco is really hard-defining the roles and responsibilities of network administrators. Looking at the blueprint of this vs. 642-825, doesn't it seem like IINS is basically a subset of ISCW? To me, I think the CCNA Security is a good idea, but they really should have looked…
-
marking VPN packets
forum, Is there a way i can mark vpn packets on an ASA5505? I want to perform bandwidth based on port, but my traffic is going through the network via vpn tunnel. Background: A point-to-point vpn tunnel, with ms-sql and port: 25 traffic. The ms-sql traffic is saturating the bandwidth of my vpn trunk. Question: What would…
-
can't reach internal secure site that is on our DMZ
Ok not sure if this can be done. We have a server that is on the web for hotel reservations. It has dual nics. One nic on our internal network and one nic connected to our DMZ. The site is a secure site. When we try to get to the site https://secure.website.com we get page cannot be displayed. I would assume this is…
-
How realistic is this?
I wasn't sure which forum to stick this in, since it overlaps a couple of Cisco certs. Basically, I am looking at a job where the employer brings on several employees which they basically spend 6 months or so training 8 hours a day through book study, CBT, and real equipment in house. The next 6 months you work with…
-
static on a fxs card
I have a fax machine tied to a FXS card on a 2801 router. I'm getting a lot of static on that card. I'm not on site, its a customer, but i"m guessing that the card may not be seating properly or some other layer 1 issue. Is there anything else I should be checking for?
-
Access-list problem
I have an access-list problem that I can't get past. For example, if I wanted to block the addres range of 192.168.12.7-192.168.12.11 to anything, how would this be written? I want to allow traffic from 12.0-12.6 and 12.12-12.255. Can this ACL be written with this information?
-
What has your CCSP path been like?
Thought this would be an interesting question, especially from those that already have the CCSP cert but also from those on your way, How did you get there? Meaning, in what order did you take your exams and how many times did you take each exam? In my case, I´m just starting, so for I´ve been lucky (well I studied alot…