-
CCNP Exams
question would you say the CCNP exams are a lot harder than the CCNA exam or on par? thanks,
-
NATIVE VLAN on 802.1q
Hi just want to ask if a port is not assign to native vlan, is it going to recieve the untagged frame or not? My answer is It will still received the untagged frame because by default all ports are assigned to vlan 1. If I change the default vlan to vlan 99 then the issue of receiving the untagged frame will not received…
-
Just Passed 642-812
Passed with a Score of 825 (Pass mark was 804) Lucky I passed it because my CCNA was due to expire of the 24th of June! Lots of Wireless Questions (More directed at the ADU) Lots of Spanning tree question and a few VOiP,QoS questions
-
callmanager trace
Have anyone used traces configured from callmanager? I have read some documentation about it, but I dont get how the traces start, where they get located, and what are the meaningful configuration settings I should use, anyone can pointout a small "howto" for callmanager traces? thanks
-
BGP question
-
Call Manager and Vonage
Guys, is it possible to integrate Vonage with Call Manager 4.x and Cisco IP Phones? thanks Alex
-
Best-practice config for ports connecting to IP phones
According to all what I have read the way to set up a switch port to connect a cisco ip phone (with an attached pc) is the following: switchport mode access switchport access vlan x switchport voice vlan y (Im avoiding other configs like mls qos trust, port security, etc) Now I have come across this network where the dude…
-
Starting my CCNP...
Hi All, I'm new to this forum, but have been here on many occasions to pick up advice and read the topics. These forums have helped me to obtain my CCNA and I thank you for that! This is why I have registered and want to offer any help I can to future CCNA's. This question has probably been posted before and my apologies…
-
cisco voucher updated
-
cisco voucher updated
i'm not sure of who all uses the getcerty4less but i ran into an interesting issue just over the past week or so. i was going online to check into getting a test voucher for 642-642 aka QoS but it wasn't shown in there list as the voucher would cover it.. so i contacted them online via im and was told that it wouldn't as…
-
Ip telephony & Trust Boundary
Dear Friends I wish u r all in very good health .... I am very confused about a topic in voice over ip and i wish u could help me understand it ...... 1)If i have a switch connected to cisco phone and the phone connect to pc, and i issue the command "mls qos trust cos" , i think that all cos from the phone and from the pc…
-
online rack rental
Does anyone have any experience with online rack rental? I've been thinking about renting some rack time for my BCMSN exam. If anyone has any suggestions or advice it would be greatly appreciated.
-
CCSP Finished
Today i passed CSVPN and i finished CCSP. I'm very glad it is over, i will take a month off and i will go for CCIE Security written. This forum is great and it helped me a lot. Thank you all guys :D
-
What happened to Cisco's website?
Hey I was trying to access some documentation on the Cisco website and it is completely down. Did they get hit by a Denial of Service attack? Probably just updating stuff but couldn't they do it at at time when I don't need it? :)
-
Password recovery problem with C2912
System image file is "flash:/c2900XL-h2s-mz-120.5.1-XP.bin" cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192/1024K bytes of memory. Processor board ID 0x0D, with hardware revision 0x01 Last reset power-on Processor is running Enterprise Edition Software Cluster member switch capable 12 FastEthernet/IEEE…
-
HIPS book?
Is there a Cisco Press HIPS book? I cant find one. If not, what do you recommend? Also, any other recommended reading? This is my last test for the CCSP :D I'd like to get the HIPS software, but its expensive!!!
-
DHCP'ish problem.
I'm having some strange dhcp-related problems.. this is the scenario: 6500(dhcpserver)--trunk--3550--user(dhcpclient). Sometimes users behind the 3550 stops to get ips from the dhcp. If i look up the users mac in the arp table of the 6500, its bound to a external ip (which it SHOULD get from the dhcp), but according to the…
-
Cant get the whole picture of VoIP
Hi fellows, I am currently on my CCNP track (and a bit bored with it by the way). Anyway, I decided to jump into VoIP for a while as there are more VoIP jobs than routing/switching ones around here, and seriusly Im sick of reading the wireless subject matter. I have been reading some of the CCVP books trying to get the…
-
dynagen plus real gear
I was really thinking about spending around a grand on real gear, but I have discovered dynamips and dynagen and pemu.... would I be stupid to buy the real gear??? Or would it be wise to use the simulator software and combine it with the real stuff????? I have no problem spending the money, but I don't want to "waste" the…
-
OSPF question
Okay, I don't want to sound dumb. But I am going to go ahead and ask this. Since maybe I am forgetting something or whatnot. In order for two routers that are connecting to one another via a GRE tunnel, do the IP's of each sides tunnel, have to be within the same network to become ospf neighbors? Keep in mind that they are…
-
One quiestion in IP Sourcegaurd
Sorry guys for this stupid question because I don't have access to layer 3 switch I don't know what will happen. I know what the use of IP source guard feature, I want to know when configuring IP SG does it check only the bind ip addresses and permit the ip traffic from the end devices? for example a range of fastethernet…
-
BSCI Study Guide 4th Ed.
Hi, I was wondering if anyone has had a chance to check out the new Cisco Press BSCI study guide 4th Ed. that was just released? I am anxious to see what it looks like. I have had one on order for quite some time with Amazon but they told me they are extending the delivery period now into August!!! I know someone out there…
-
Cisco Press 4th Edition CCNP Study Guides
Any reviews on these updated cisco press books??? I've already heard bad things about the BCMSN by David Hucaby But i've heard that after NA cisco press is the only way to go If i shouldn't buy these, than what would you suggest??
-
CCNP Portable Command Guide
Hi all, I am getting ready to start preparing for my CCNP exam. I am planning to use the Exam Certification guides for each of the exams. I was wondering if anyone has used the Portable Command guide for BSCI and BCMSN. Is it worth to buy those books aswell ? Thanks
-
BCMSN LABS
Does anyone know any good sim software to do labs on? I don't really have the recources to get actuall hardware at this time. I looked at the Boson net sim stuff, but it costs an arm and a leg. Anyone have any suggestions I greatly appreciate it.
-
HIPS exam
anyone taken this? What gear is needed to pass this exam?
-
NEC Phone showing as CDP neighbor
Anyone ever seen this before? I thought CDP was Cisco only...perhaps other companies are figuring out they need to fall in line... Here's the output: C3750_xx_xxx_x_x#sh cdp neigh fa1/0/19 detailDevice ID: 0060B9076092 Entry address(es): Platform: BCM91100, Capabilities: Host Interface: FastEthernet1/0/19, Port ID…
-
Confuse with Wlan Control interface and AP's configuration
Hi I am confuse with WLAN interfaces, does any one of you knows the best site about this topic. I know the meaning and uses but how where to map exactly is the hardest part.
-
802.11 B and G 2.4 GHZ in one device
802.11 B and G can be combine in one device also 802.11 A or in other terms a 2.4 GHZ and 5 GHZ can be combine in one device ( access point or Cisco WLAN bridge ) or DUAL . My inquiry is in using 2.4 GHZ band both B and G in one device does not affect each other, is there any problems when a 802.11b uses channel 1 and…
-
CCNP Lab Books
Hello all, Was just wondering if I can get a list of books that have good practice labs from everyone that would be nice. I am looking at starting my CCNP route early to mid next year. Hearing why you like the book would also be good to know. Thanks
-
HSRP
Dear Friends I wish u r all in very good health ...... while i was studying HSRP, i see the following command "standby 1 preempt delay" ...... and that was its description in the cisco material "When a preempting distribution switch is rebooted, HSRP preempt communication should not begin until the distribution switch has…
-
I hate the CVOICE! (stupid dumb exam)
hey guys well Ive tried to pass the CVOICE exam, but I just cant pass that stupid exam. IM trying to get my CCVP and this is the first exam that Ive taken for the CCVP track. so far it sucks. the first time I failed with a 687, the second time arou nd I did even worse with a 650. the materials Im using is Kevin Wallaces…
-
PIX certs
Hi, I would like to round off my PIX experience with appropriate examinations. Are these part of the CCSP these days? Any recommended books for the appropriate PIX exams would be helpful. Thanks
-
HSRP and VLANs
hey people... say i have the following VLAN config on a router: interface FastEthernet0/0.2 encapsulation dot1Q 2 ip address 10.1.24.2 255.255.255.192 ip helper-address 10.1.24.3 no snmp trap link-status ! interface FastEthernet0/0.3 encapsulation dot1Q 3 ip address 10.1.24.65 255.255.255.192 ip helper-address 10.1.24.3 no…
-
Passed QoS
I passed the QoS exam at Networkers. Got a free test, and that fit in with the CCIE. It now joins CSPFA as one test waiting on me to get around to the rest. Oh well, that's three certs to pick from after the lab. :) Peter
-
Immediate need to learn PIX
Well the subject line says it all. Just looking for good books or tutorials that would get me up to speed quickly. I already have my CCNA so I'm not totally lost. Thanks for the help.
-
CCNP Home Lab
Hi, i'm getting started on my CCNP studies and i'm in the process of getting some routers together for my home lab. Currently i have two 1721's running 12.4 IOS. I also have two 1601's running 12.0 IOS. I would like to get one or two more. Do you guys think i should get more with 12.4 IOS or would something like 12.3 be…
-
do i need valid ccna ??
hey peoples ive started learning for ccsp. I should hopefully be doing the SND exam first in the next couple of weeks. Just wondering though do i need a valid ccna?? I was looking on the cisco site but im abit confused still ?? thanks heaps :) justin
-
CCSP equipment
I am going to sit the CCNA soon, and I am not worried about passing it. Currently I use Cisco devices at work. I have been responsible for several switches, CSS, a little pix work and some ASA work. Now I am really interested in going for the CCSP. At home I have one 2500 router, and am thinking about getting a catalyst…
-
CWNA video by CBT
Hi, does anyone of you watch the CWNA video is this video helpful if I am going to take BCMSN?
-
VMPS request: more than configured
Hello, Does anyone know why my cisco 2950 does more VMPS requests than configured ? 04:27:00: %VQPCLIENT-7-RECONF: Reconfirming VMPS responses 04:27:00: VQPC: Set needReconfirm. Total ReconfirmPending:1 04:27:00: VQPC PAK: xmt transaction ID = 0x00000022 04:27:00: VQPC PAK: sending query to VMPS 04:27:00: VQPC: Started…
-
ISCW test in 4 hours - *passed!!*
No superstition here. Friday the 13...ha! I've been cramming for the last week, and studying this pig for 2 months. I have the latest ISCW student guide, and the most recent BCRAN Cisco Press book I could find. I have the lucky socks on, and am scheduled at my lucky testing center. I will either be celebrating this Friday…
-
passed BCMSN
Hi Guys, I passed BSMSN today, scored 857 with a pass mark set at . questions in all, a lot of , and . Two scenarios, both straight-forward if you know . There was one horrible question, in fact the first one on the test, about . The question had a and some with multiple questions about . It probably took me ten minutes to…
-
Re-taking exams?
Hi Guys, On my 'pass printout' it states: "Cisco policy requires that you wait a minimum 180 days before re-taking an exam (with an identical exam number)." Is this a definate, fixed time-scale or has anyone re-taken an exam within a few weeks if they've failed it? I failed routing two and a half years ago, re-took it a…
-
Certification issue
Hi guys just clarification I passed ccna last 2006 june, passed BSCI last Nov 2006. This year 2007 I took BCMSN the new exam and failed. My question is do I need to re-take the BSCI exam after passing it last year. I read some web site that no need and it will be credited. Due to I am planning to re-take the BCMSN exam…
-
help me
Please I need the Implementing Cisco Voice Gateways and Gatekeepers Volumes 1 & 2 Version 2.0 because i find some mistakes in the Version 1.0 any one can help me ..... thanks in advance Mhiar
-
How do i find A router's Serial#??
I had an instructor at school ask me if I knew how to find a router's serial number. The sticker was not on the back of the chassi. I'm pretty sure it's not in show version or during the boot sequence. Anyone have any idea?
-
Pix, Firebox or Netscreen?
Hi guys, This is not really a CCSP question but I was looking for some advice about how to learn more about firewalls. I have a CCNA lab setup already and want to add a couple of firewalls so that I can learn VPN's etc. For doing this, should i use Pix, Netscreen or a Firebox. At work we actually use Fireboxes and…
-
Post-illness. CCNP exam retirement question. Please help. :)
Hello, about a year ago I was diagnosed with Multiple Sclerosis, just after having passed my BCSMN exam (pass date was 4 Jun 2006). It pretty much knocked me out of I.T. until I changed my diet and had some significant improvement. Well, a couple of months ago I found out that I don't have MS, but that instead I have…
-
FAILED BCMSN
Hi everyone yesterday I took the BCMSN exam and sadlly to say I failed score 693. The book I am using is not good lots of missing topics. The book I am using was CCNP BCMSN Official Exam Certification Guide (4th Edition) (Exam Certification Guide) by David Hucaby. The book I should purchased is Building Cisco Multilayer…
-
Exam Certification Guide vs. Self Study Guide
Im trying to decide what Cisco Press BSCI book to purchase. What are the advantages and disadvantages of each? Exam Certification Guide vs. Self Study Guide I do not plan on attending any classes, I will be self studying.
-
Change telnet port on cisco router?
Is there a way you can change the port that telnet is listening on on a cisco router prefferably 3660 or anyone really just want to know...I know you can implement ssh over 22 but can you configure any other ports??? Thanks, kenny.
-
MeetingPlace
Guys, besides Cisco.com, I'm looking for reading material or a book on MeetingPlace.... thanks Alex
-
Cisco welcome Kit
I pass my CCNA exam last May 25. I still did not received my cisco kit, acording to the Cisco web site they sent it last June 11 and today is June 20. The web site said Returned: NO. My question is How long do they delivere it? Is it an envelope or a box? and normally what company do they use to delivery? I checked the…
-
crypto map change
can you make changes to a crypto map config while it is appiled to an interface? I would not think so as you would probably have to redefine the entire crypto config. tia!
-
Frame-relay switch!
It is there a device that can act as a frame-relay switch? I am tired of configuring frame-relay switching everytime I want to set up a frame-relay. That would save me like 5 minutes if I had a device which can perform a frame-relay switching on its own
-
Bought the BSCI Study Package from Chris Bryant
I went ahead and bought the BSCI Study Package from Chris Bryant because I really like the Trainsignal vids. The study guide looks pretty good so far. Also looking forward to using the labs. I am hoping this is the extra "umph" I need to secure the BSCI, but I also have the new Cisco book which is supposed to be released…
-
3550 and 2950 VTP/trunk interoperability
Okay so I just got home from school and I instructed a lab on VTP and VLANS. I brought my 2950 and 2924 to school and used the school's 2 3550's. So I don't have any configs to post but I could not for the life of me get the VLANS from the VTP server which was on the 2950 to propogate to the 3550. The 2950 was connected to…
-
Using SDM Vs. Command line to configure devices for CCSP
Hi Guys, I purchased the CBT nuggets for SND exam . However, their demonstrations don't use the Cisco SDM utility to configure devices. Is that going to be an issue on the real test since Cisco Curriculum calls for using SDM instaed of command line?. Please advice.
-
CEF
Dear Friends I wish u r fine ..... I am too confused and i wish u could help me ... we all know that CEF is enabled by default on catalyst (4000 & 3550) . I know i can disable it on interface basis using "no ip cef" (for 4000 series ) and "no ip route-cache cef" (for 3550 series) ... But can i disable CEF globally (from…
-
Passed BCMSN
I passed with 825, I think Im still in shock, maybe I was lucky. Its a hard exam, harder than the BSCI; and I thought the BSCI was hard! I suffered on almost ALL the questions, but particularly in the QoS/VoIP part and in some Wireless questions I didnt even know what they were talking about, geez. Anyway, right now Im…
-
Difference between CST and 802.1D
Hello guys, I am currently preparing for the switching part of my IE exam and reading the BCMSN self-study guide. I just finished reading the whole STP part of the book and I am kind of confused - I don't see any difference between the 802.1Q CST and 802.1D. Is there any difference at all and if so what is it? Thanks in…
-
Time between CCNA and BSCI
Hey all. I was just wondering roughly what the time period has been for all of you between attaining your CCNA and BSCI (or your first professional level test) was. I had been studying some CCNP topics before attaining the CCNA, so I've got a jumpstart, but I have got to say- the individuals who have/are close to having…
-
VPN exam
I am reading for the vpn exam at the moment. i have the cisco book for it and looking at the cisco exam notes the bit missing is: Configure the Cisco Virtual Private Network Client Auto-Initiation Feature. Either i missed what this is or its not there and ill look on the cisco website. Is there anything else this book…
-
Firewalls, Layer 2 and DMZs?
With the ever increasing use of virtual servers and the possibility of usinf 802.1q to trunk VLANs around, should we still keep Layer 2 completely separate, even on DMZs? i.e. If I have a an ESX server, should I host VMs that may appear on a DMZ with public addressing at the same time as hosting a VM with an internal IP.…
-
CCNP completed!
I passed CIT today with 934, and I'm finally CCNP!! :D Now I will have a month off before hunting down CCIE at Cisco's ASE program in Amsterdam. Not sure which track I'm heading for because I think they will have their say in that matter. But I'm looking forward to some hard studying!
-
VMPS
Is there any IOS versions out there for a 2950 that has VLAN management Policy service capabilities? or is this strictly on 6500 series switches???
-
MSTP
Dear Friends I wish u r all fine ..... Ihave question about MSTP and wish u could help me solve it ... why switches wait until you are finished making changes to MST to commit them , rather than changing MST as you enter commands ??? I mean that when u enter mst configuration mode and begin configuring revision number ,…
-
642-552 SND Books to use?
Hey all what book should I use to start studying for this exam? Any cisco press reccomendations?
-
HELP! Desperately need to head for CCNP, just passed CCNA.
I humbly come to you GMs, I just managed CCNA but desperately need to start CCNP. Am seemingly finding it hard to find the start point! Kindly advise the material that will help me towrds CCNP. Kind regards, alyjay :
-
ASA question
Figured this is the best place to ask this question. Those of you who have experience with the ASA. I know that the ASA can provide permiter AV and IPS functionality, but I was wondering, can the ASA provide both of these functions at the same time or can the ASA only provide firewall AND AV or firewall AND IPS.
-
Scheduled for BCMSN..
OK gentlemen, i'm finally ready i think to take BCMSN, i scheduled for 18th (next monday) 1PM.. So if i wake up in the morning i can repeat stuff. Any suggestions, pointers would be appreciated.
-
Difference between using subinterfaces and using FR Map?
Admittedly I don't work with frame relay very much, so my understanding may be a bit sub par. Essentially I want to know what the differences are between using subinterfaces and using frame relay map commands? I've seen hub/spoke networks set up using both, and both support the broadcast command, so what gives? Is it just…
-
Order in working towards CCVP
Dear all, What is the appropriate order for taking these exams to achieve CCVP? 642-642 QOS Quality of Service (QOS) 642-432 CVOICE Cisco Voice over IP (CVOICE) 642-426 TUC Cisco Voice over IP Fundamentals (CVF) 642-444 CIPT 4.1 IP Telephony Troubleshooting (IPTT) 642-453 GWGK Implementing Cisco Voice Gateways and…
-
BSCI self study material
All, Recently renew the CCNA and would like to go for the CCNP (BSCI first). I am looking for the self study material and there are so many out there and seems some of the books are for the old exams. I am wondering which book(s) is better for preparing the exam and any other suggestions are highly appreciated. Thanks,…
-
Inter-Vlan Routing books
Hello everyone! Good day! Which books do you recommend to read, study guide and/or as reference that discuss more topics regarding Inter-Vlan Routing? Thank you in advance for your replies. Regards,
-
BCMSN versus BSCI
Hi, I was just trying to get a sense of how most people approach these. It seems like most people tackle BSCI first then BCMSN but I am not sure if that is because that is the order Cisco lists them on their website or not... My instructor suggested that i might want to consider the material in BCSMSN first because there…
-
Multilink Problem
I am using Multilink on 3 serial , my cpu load is always on higher side. its fall b/w 50-60, i am using 7513. after chking, notice some problem with ip cache. here is the config interface Multilink1 description <<<<< Aggregation of All Serial >>>>> ip address 192.168.10.1 255.255.255.252 ppp chap hostname ets ppp multilink…
-
Lab Question
Hey whats up all, I'm alittle tight on money right now and am wanting to study for the ccnp. I currently have 2X 2501 , 1X 2516 and 1X 1700 series routers. For switches I have two 2900 series switches. So lay it on me, for all who have passed the exams required for ccnp do I have enough stuff to get by on the exams? I know…
-
Failed 642-901
I took the test today. I failed with 766. It was much harder than I anticipated. Someone a while back posted that it seemed very adaptive even though they claim it isn't. I agree, it does seem adaptive as it really nailed me on the most non-important things that I was unsure of. Overall, I do not think the test judges…
-
CCNP before CCNA
This has probably already been brought up but I couldn't find any threads. Half way through my study for CCNA, right after finishing Odom's intro book, I started thinking Since I am definitely planning to get CCNP within a 1 year time frame, why not do CCNP, or at least BSCI and BCMSN, before CCNA?? I know CCNP builds upon…
-
Hiding SNMP Community Strings?
Hi all, is there a command to hide SNMP Community Strings from public view. Something similar to "service-password encryption" for passwords. Thanks!
-
hardest aspect of the CCNP...poll?
Hello all! I found the "What is the hardest topic to study for CCNA?" thread to be very helpful with my CCNA studies. Could we start a similar poll or something for CCNP? I would start it...but I just began my CCNP studies, so I still would not be too certain as what to poll exactly. What do you guys think? J PS I searched…
-
BPDU
In STP, Does every switch sends BPDU or only the root bridge??? In cisco material, the following 2 statements regarding BPDUs are stated: a) In legacy STP, BPDUs were only generated by the root and propagated throughout the spanning tree domain. b)STP communicates Layer 2 information between adjacent switches by exchanging…
-
So many CCNP CBTs to choose from!
I plan on getting a lab with (4) 3640 routers & (1) 3550/(2)2950 switches within (4) months, but would like to check out some CBTs first for the CCNP to go along with the Cisco Press Books. Yes I know I could just WAIT for my lab, but I would strongly prefer to go with CBTs (helps piece things together) prior to getting a…
-
CCNP Timeline
What would be a legitimate timeline for getting through to CCNP status? I'm a 6 month old CCNA and am fairly motivated. I'm just not sure if we're talking months or years? Also, what is the best texts and authors for the tests. I know everyone was big on Lammle for the CCNA. What about hardware setup and is self study…
-
Custom SNMP Traps?
Hey guys, I'm trying to find out if SNMP can send traps based on BPDUFilter. I don't see it in the 'enable traps' list. Can you make custom traps? Thanks C3750_10-115-0-13(config)#snmp-server enable traps ? bridge Enable SNMP STP Bridge MIB traps cluster Enable Cluster traps config Enable SNMP config traps copy-config…
-
I want to buy hardware for CCSP please give recommendations.
Hi guys i have just passed by CCNA and going for CCSP now. I know for CCSP it's best to work with actual hardware so i need some recommendation of getting the appropriate hardware for hands-on experience. Could current CCSP holders and current takers enlighten me on the best equipment to buy, particular model i.e. Pix 501…
-
Should i buy this 3 Ciscopress books for 642-552 ??
Hi guys i have seen 3 recommended reading books from ciscopress for 642-552, can anyone tell me if the 3 books is worth buying as i do not know any other reading materials for 642-552. The cisco main link to the books is as below >>> http://www.ciscopress.com/markets/detail.asp?st=44730&rl=1 Below is the title of the 3…
-
Take Composite 642-891 or BSCI and BCMSN
I am wondering that i should take a composite CCNP 642-891 exam or step by step. Because i dont have much time and i think my Cert CCNA are being reach expire date . I knew that taking composite will more difficult than each of cores. Help me keep my mind or change www.learning-cisco.com :: Learning cisco certificate…
-
CCVP Classes
Hello I am from Chicago area and I am looking to enroll in some ccvp classes in a local college. I searched online, but I couldnt find any college that offer such classes. I was wondering if anyone knows of a college that offers such classes. I am not looking for 3 or 4 day seminars. (Oakton college offers a VOIP class…
-
Got PEMU to work!
Woooooo go PEMU! boy i'm not sleeping tonight!! this is too much fun
-
Possible BGP study book
Here is a book I have been looking at for the BGP studies. http://www.amazon.ca/Practical-BGP-Russ-White/dp/0321127005/sr=8-1/qid=1169700910/ref=sr_1_1/701-1140983-2558757?ie=UTF8&s=books Part of the description is incorrect on the amazon website. I downloaded the ebook off a torrent site to see if it was worth a purchase…
-
To Redistribute Connected or Not: This is my question
Well, going for BSCI on Tuesday. Just a quick question concerning simulation question. Let's say you have a simple 3 router scenario and you are told to redistribute between EIGRP and ISIS or whatever. The question does not specifically say to redistribute connected routes. It just has some specifics like the metric for…
-
CCNP Lab equipment - BSCI
I am working on BSCI. I have 3620 ( frame switch), 2620 and 2611 both spoke routers. My questions is will this be enough equipment to use for the self study guide? The book lists a gang of equipment and I don't know any place other than net acad that has those kind of resources. So I figure I would use loopback and sub…
-
What is the Basic Minimum Hardware for CCNP
Hi Guys, I'm fresh from passing CCNA and would like to continue to CCNP. I am wondering what is the basic hardware requirement (routers/switches) do I need to practise for all the CCNP exams. I managed to pass CCNA using dynamips alone, but I know I will have to get some practise hardware to pass CCNP. Cheers.
-
Switch power issue?
Guys, I was told by some of my aspiring CCNA friends that maybe i should seek your assistance. I bought a 2924 XL switch for my home CCNA lab. It's having some problems. One you plug it in it seems to lose power off and on. In fact it doesn't even poweron long enough to get to a log in screen. It seems according to the…
-
Is Cisco planning to stop the CCIP cert track?
-
ISIS IOS level
I am running a Cisco 3750 with IOS c3750-ipservicesk9-mz.122-25.SEC2.bin. When I try to enable "router isis" I get a message stating this protocol is not available. Does anyone know what level IOS supports ISIS? Thanks!
-
Fresh off the press: Cisco Press BSCI Portable Command Guide
I got the new CCNP BSCI Portable Command Guide in the mail today and it's very concise and helpful. It's got every command found on the new BSCI 642-901, so I can see myself using it thoroughly.