-
Wireless vs. Security
I've recently decided to get back into the wonderful world of Cisco. I used to hold the CCNA, CCDA, and CCNP certs but they've long since expired. I've begun studying for my CCNA again and was wondering after that in which direction I would go. Back in the day I always had a fascination for security but never got into it.…
-
Administrative Distance Problems with Redistribution
Dear Friends I wish u r all in very good health.I am confusing about a topic in redistribution and wish u could help me understanding it. If we have 2 Domains and both run RIPV2 and OSPF , and their is 2 boundary routers and both perform mutual redistribution, suboptimal path may result and we can help this problem using…
-
Question about 642-511
Hi, I'm taking the VPN Exam in a few days and I've been using the old Cisco VPN Self Study Guide to train. ¿Could anybody tell me the topics that have been added to the current version of the exam? I was also wondering wich version of the VPN Client are they testing (old interface / new interface). Thanks Pablo
-
Passed BSCI 642-901 988/1000!!
Well, I passed it today. 988/1000. It was quite tough exam! Surprisingly had a lot of questions on IPv6 and multicasting and only few on BGP. Mostly OSPF and EIGRP which I nailed :) I think I will go for BCMSN next. Any recommendations what to use to prepare for it? 10x
-
Reason of why all areas must connect to the backbone area?
Well in OSPF is like this and im wondering why Most of the stuff in OSPF works like a link state routing protocol... at least for example inside an area it works like this Routers inside an area exchange type 1 and type 2 LSA to build the topology table(LSDB) them use the SPF algorithm agains it to do the routing table.…
-
New certificate
I just got my new cert. I'm still undecided whether I like the old CCNA certificate or the new one. I also got my new ID card. I guess I have 2 questions concerning the wallet card. Why? What is the mag strip for?
-
Cisco Networking Academy any good?
Has anyone been through the Academy or know anyone that has? Sometimes when I am alone studying my books, and playing with routers, I wish I was there with other people to speak about what we are learning. The forums here are great, but there is something to be said about instructor/student based training. Plus they might…
-
BSCI Exam
Is it the BSCI exam a test questionaire as I did with CCNA?, somebody said that is composed by 2 parts, 1 part is a test questionnaire and 2 part is practice. Is it that true?.
-
Which test order
I just recertified my CCNA and want to keep up my good study habits. In what order should I take the tests?
-
Pushback?
I think that the new CBT Nuggets vid for BSCI just got pushed from Mar. 28th to "April"! Bogus!!!
-
Boson Inter-Vlan routing Problem
I'm trying to configure Inter Vlan routing in BOSON Netsim, but i can't. Every time i issue the command sh ip route in the 3550 switch, boson freezes... This is my simple config. Assume that Vlan2,Vlan3,Vlan4 exists. ip routing int vlan2 ip address 10.2.2.1 255.255.255.0 int vlan3 ip address 10.3.3.1 255.255.255.0 int…
-
Passed ASA/Pix exam this morning
passed with 848..I didn't do well at all on VPN and had some issues on my last sim. SNRS is next...well only after I go over VPN again... opers13
-
Man oh man....
I failed the SND 642-552 yesterday morning. It was the first cert test I've ever failed and felt terrible, but, I really just barely failed. What happened is I gave myself about a week to prepare for the test. I work with Cisco routers, switches and IDS hardware, but my VPN and firewall experience is limited to other…
-
Passed BCRAN!
Glad to have this one in my belt! :) Passed with a 966. Took the old exam because I'm a CNAP student. Now on to the switching module.. I'm halfway there!!!
-
Questions
I found some questions and i need a "second eye" 1. Mitigate CAM table overflow e.g we have a user in fa0/1 who sends thousands arp reqs. Is this config enough ? interface fa0/1 switchport mode access switchport port-security switchport port-decurty aging time 5 switchport port-security maximum 1 switchport port-security…
-
class-map? match access-list?
Studying about application inspection: ! ! access-list MY_EXAMPLE permit tcp any host X.X.X.X eq 25 class-map MY_EXAMPLE match access-list MY_EXAMPLE ! ! My understanding: 1) Access list permits SMTP traffic from anybody to this specific host X.X.X.X After reading on cisco.com: 2) class-map classifies traffic that will be…
-
Confused with this config
Hi all, can someone help me understand how there is 2 ip addresses on fastethernet 0 when there is only one ip configured on the interface. This config is from production/live network. User Access Verification Password: router>en router>sh ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software…
-
Building a semi future-proof CCNP lab
I'm looking to build a lab for CCNA/P, I have access to one at school but its a hassle to get in there and we only get a 2 hour time slot per week (and its at an inconvenient time) plus theres never enough serial cables The pods we're currently using four our courses consist of: (1) 2501 (1) 2503 (2 are 2520/2522) (1) 2610…
-
Guys help needed
Hi all, I'm planning to complete CCIP, would anyone pls. suggest which one should I take first. anyone having good docs..pls respond. thanks
-
Guys help needed
-
Can not attend Academys in Singapore
I called the two places that offer the Cisco Academy for CCNP - Nanyang Polytechnic and Temesek Polytechnic. You have to already be a student in the Univeristies to attend. One also said they only accept current students enrolled in a degree program and preferred corporate customers. Are all the academies like this? I…
-
BGP single homed Vs Multi-homed
Hi All I wish u r all in very good health.I am confusing about something in BGP and wish u could help me understand it. If i have one border for AS, and this border router connect to multiplie AS, is this AS is multihomed??? or it must be more than one border router for the AS in order to consider this AS multi-homed ???…
-
Cisco Devices Used Outside the US
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are…
-
Rack rental recommendations
Hi peeps, As I am looking ahead, and reading some of the grumbling posts over the grueling amount of hardware needed for labs now in the CCNP for exams such as the ONT, can anyone recommend me a good online rack rental source? I have seen a few on the Internet, such as ****.com, but you never know. If anyone has a good…
-
Three questions
Hi Folks, Okay, rack session is over. 1) How the heck do you stop a "debug all" after issuing it? (I'll never do that again.) I had to blip the rpc to stop the chaos. 2) Is there a "do" command equivalent for the ASA? On a router, I find it a big relief to issue the "do" command in the configuration modes so I don't have…
-
BCMSN Self-Study Guide availability
According to Amazon, this was supposed to be released last week. However They still haven't shipped one to me, and they are saying 4-6 week availability on it. Wondering if anyone has gotten one yet, particularly from Amazon? Just curious.
-
Passed 642-502 SNRS
Just wrote this exam. The Cisco official study guide was crap. Lot's of typos and errors in the syntax. Luckily I had a spare router with Firewall feature set to practice on and validate the syntax. 1 down, 4 to go.
-
ASA via sleep deprivation
The other day, for the first time, I was happily configuring away at 'asa1.' Today, I can't even configure 'nameif' on 'asa1' but I can configure everything on 'asa2' What happened? I know I'll get a reply that will make me slap my forehead and feel sheepish afterwards. Maybe this is attributed to trying to get back on the…
-
New SNRS
For all of u who studying for SNRS, new 642-503 SNRS was announced. Last day to test 642-502 will be 6/20/07. I must hurry up....
-
CCSP hardware explanation
Which is better to have for the ccsp, Pix 506E Pix 520 Firewall UR/Failover 16mb flash with 4 FE's v6.3 Pix 515 64mb 3FEs v6.2 I'm not sure if the versions are important as i'll prob be able to upgrade. Anyway would someone be so kind as to just give a breakdown on the hardware needed for ccsp and what the main difference…
-
EIGRP Neighbors and Adjacencies
I have always thought that for two routers to become "neighbors", they had to be directly connected. After reading some, it now seems that any two routers in the same AS have the opportunity to become neighbors. Is that true? On top of that--EIGRP routers share their topology tables with their neighbor adjacencies, right?…
-
need recommendations
Any recommendations on the Cisco Press self-study guide versus the Cisco Exam Certification guide for the BSCI - 642-901?? I want to buy just one out of the two.
-
need recommendations
-
WAN TECHNOLOGIES
Hi Techs, Been trying to understand WAN technologies and can't blend it togethether. Ofcourse a WAN connects multiple sites. My Query is how do the CARRIER SYSTEMS(T1,T3,E1), OC SPECIFICATIONS, PACKET SWITCHING OR CIRCUIT SWITCHING, X.25, ATM, ISDN GET IT TOGETHER to form a WAN? I'm not sure whether i've worded this…
-
Started to pursue CCIP.
Folks. I have a question for you? I am working towards going for the R/S as you all know from my intro a while back. I have been working on bgp since i feel that not only is it one of my weakpoints but a major part of the lab itself. While doing so i have had this brainstorm that i should make attempts at the CCIP…
-
Started to pursue CCIP.
-
moving ios image thru console
Hi all, does anyone know of a way to move an IOS image from a router to a tftp server while using the console port? I ask this because I was reading O'Reilly's new Cisco IOS cookbook and in chapter one they talk about copying an IOS image to a router through the console or aux port, but they don't mention whether the…
-
Subnetting Question
I'm taking a practice quiz, and came upon this question: You are presented with an IP address with a prefix of /22. How many more subnets can you add to your design if you further subnet with a VLSM mask of /27? A: 256 B: 64 C: 32 D: 16 But wouldn't it matter what IP/class is being used in the example?? If we were using…
-
Yet another CCNP home lab setup question
Hi everyone, sorry for the redundancy. I have a question concerning my cisco home lab. I have just passed my CCNA and am ready to begin studying for CCNP, but I am worried my lab still needs more hardware to fully support CCNP practice. My lab goes like (4) 2503, (2) 2501, (1) 3620 w/ 1 FastEthernet and 4 Serial Ports (for…
-
BSCI 642-901 more questions!
OK, i was trying to get some rest from studying but i'm too excited about getting into the new BSCI studies. I was wondering if anybody knew what IOS version the lab sim they run on the exam? Would i be OK running lab with my 2621 routers or i need something better? more questions, to be continued...
-
blokcing SMTP traffic on an ISP
hi guys On these days most of the ISPs are applying policies focused to reduce spam. It seems like blocking port 25, with its exceptions, is part of the solution. my question is: What else can we do on cisco's to have an optimal deployment of this solution? and What are the most important performance issues to look over…
-
BCMSN 642-812 1000p!
Got a whooping 1000p on my BCMSN last friday! Originally i was going to write the old 642-811, but my school had one voucher left for the new one, so i figured i'd give it a shoot, and it worked out quite well :D I really enjoyed the BCMSN-course and found it to be very interresting and entertaining. Now ONT is next.. :D
-
642-825 Passing Score?
Does anyone know what the passing score for the new 642-825 ISCW? And the other CCNP Exams passing score? Thanks
-
Passed IPS
After getting so worked up I nearly got sick this turned out to be a bit easier than I thought it would be. Each time I do these I get major nervousness about 2 hours before, I'm fine once I get into the exam center but that pre-exam jitter is a killer. Anyway with most of the Cisco exams I've sat I've thought that the…
-
BCMSN in less than 24 hours ... Pray 4 Me --> I passed!!!
Hi, I've been studying the last few days for my BCMSN exam. After finishing the 'Official Cert Guide' I felt good, but after taking some practice test the feeling was completely gone Voice (and QoS), Spanning Tree (off course) and some security parts are really though. From now on, I still got 20 hours to re-read some…
-
Star Trek communicator for Sherwood Forest Hospital
Just came across this link detailing the rollout of 1200 communicator badges being used for phone services across a large hospital. http://www.e-health-insider.com/news/item.cfm?ID=2503 Now if they could only get the transporter to work!
-
EIGRP stub routing
Okay It is normally done in a hub and spoke topology, its done to improve network stability Okay the hubs are the distribution routers, and the spokes are the remote routers which are configured as Stubs ok i get that The remote routers i mean the ones configured as stub can be conected to one or many hub…
-
EIGRP: ip default-network
I'm having some trouble understanding what this command actually accomplishes. It seems like it is similar to having a static route, except it is advertised. Is this just a way to advertise a static route, so it benefits all routers in the AS, not just a single one?
-
Passed BSCI 642-901
Passed with 800 points Hardest exam i've ever done, but I really should have studied more (caught off guard by IPv6) Took me 6 weeks studying 3 hours a day during the week and 10 hours per weekend. Used the new Cisco Press self study, Cramsession 642-801 study guide and Dynagen/Dynaips. Expected some hard IS-IS questions…
-
question about OSPF routing on 3750 & 3550 switches
I have a question about ospf routing on Cisco 3750's & 3550's. Two 3750's connected via ether channel over ports G8/G9. I have OSPF configured on the two 3750s and they route across to each other no problem. I also have ports G5/G6 on each 3750 going to a 3550 switch (again via etherchannel). When I do a "sh ip int brief"…
-
IS-IS protocol... does anybody use it?
I have worked as a net admin at two different companies, and now work as a network engineer at one of the biggest ISPs in the US, and have NEVER seen IS-IS in use. Was curious as the CCNP book states that it is one of the most popular protocols out there for ISPs. So whats the skinny???
-
BSCI Exercise lab in Dynamips major help needed.
I think i speak for all of us Dynamips n00bs (who will be going for new BSCI) when i say that i (we) need your help in creating an exercise lab for new BSCI exam in Dynamips. CiscoPress recommends that you purchase 10 2811 routers with the right mods, not including few switches. Total cost? About 12-18 thousand dollars.…
-
Successor vs Feasible Successor
I thought I understood Successor's and Feasible Successor's until I read something out of my BSCI book: "To qualify as a feasible successor, a next-hop router must have an AD less than the FD of the current successor route" And if I understand things correctly: AD = Cost of all hops to destination added, starting at next…
-
2611 Good price, ok for new exam criteria?
eBay item link: Cisco 2620 Router 16/64 12.4 (2600 2610 CCNA CCNP lab) Does that look like a good buy or should I look else where? I wanna start building my lab up for may time because I will be moving in the summer time period so I wanna see my money parted before then so i don't get anything i don't need for my new place…
-
CCNP Boot Camp
One of my friends recently attended a week long CCNA boot camp. He told me that their instructor (who is a CCIE) went over everything the CCNA covered. He is confident that he is now ready for his CCNA exam. (My friend actually already had a CCNA, but it expired a couple years ago). I just find it hard to believe that any…
-
Recommended Practice Exams for BSCI 642-901
Anyone got any recommendations on which Practice Exams to use for 642-901. For all my Microsoft Exams I used Selftest and apart from Exchange where I also used Measureup they were brilliant. Also used Selftest and Boson for my CCNA but I am a bit wary of them now as these are new exams. So any recommendations greatly…
-
IPS Rack time
Can anyone recommend an online rack rental that has a 5.x IPS appliance running? Cheers.
-
new to CCVP. Where to Start??
hello folks, I am done with my CCNA. would like to do my CCVP, require few answers like which to start with is it CVOICE or QOS and do i need any simulators and also which books to study. thanks in advance
-
Dynamips run 12.4
Hello All, Has anyone here tried running IOS 12.4 on dynamips or does dynamips support 12.3 only? Thanks in advance.
-
Freeware TACACS download
Ok, here is a link in case anybody is interested in using this. Unfortunately I don't think I am going to be able to use this, but somebody else might. ftp://ftp-eng.cisco.com/ftp/pub/tacacs/ Would anybody happen to know of a freeware TACACS/ACS download site? Anyone? ........ Anyone???.......something "D O O…
-
TACACS and ACS server
Hello people, I would like to implement better security/managment for our network here. I initially heard about TACACS+ and now I am hearing about ACS servers. So now I am looking for a little clarification. Does anybody know if cisco still supports TACACS+? Would anyone recommend using ACS server in place of a TACACS+…
-
PBR with PPTP is this possible
I have an 1841 with one adsl interface pointing to the internet to isp1 I have Fa0/1 pointing to isp2 I have one lan interface fa0/0 with ip address 10.1.1.254 Presently I only have one Static nat for an inside address of 10.1.1.1 which nats to a public address & proxies for mail & PPTP (The 10.1.1.1 is an ISA SERVER). I…
-
Passed BSCI!
Passed with 879 points! :) I am a CNAP student so I took the old exam btw..
-
Bryant Advantage Updated for new exam BSCI Package
For 77 dollars if ordered by midnight Feb. 22. Is there always this 20 dollar discount to pull people in? What do you guys think? Worth the 77 bucks?
-
FrankenPIX xD
I'm building a FrankenPIX :) :) :) :) :) :) Has any one tried building one before? :) just checking
-
1750 router
I have just got a 1750 router and a VIC-2FXS card. I cannot see the card when I do a show diag. I am under the assumption that the IOS needs updating...does anyone have any ideas about this ?
-
series 1720 password recovery
Hello mates, anyone know how to do password recovery for the series 1720, I just got a great deal off of ebay for a 1720 with a wic 1t, unfortunately it has a password on it and the seller doesn't know anything about cisco routers. I did a google and found a link on cisco's site but it shows you how to do a recovery for…
-
Cisco lab manual challenge lab
Hi Guys... Im not sure if any of your are using the CCNP1 cisco Lab Manual. Anyways...I have complete the BGP Challenge Lab...but im not sure if my configs are correct. I bought the lab manual but there is no answers for the challenge labs and im not sure how i can check to see if its right. Anyone know where i can get…
-
BGP+MPLS Booked **UPDATE PASSED **
-
BSCI study material to success in exam
Hi all, Could you guys guide me here about the exact changes in the cisco material in the 642-801 and 642-901. Also the recomended reading sources for the changes in the exam. I will be very gratefull to you for such kind of help. Thank you :)
-
Should i buy this book?
Routing TCP/IP, Volume 1 (2nd Edition) (CCIE Professional Development) (Hardcover) Well i know im just studying CCNP but i just find that book soo interesting and i read the index and feels like something i ccould understand.... I want something to expand my knowledge about routing protocols, i wanna know deeper of them.…
-
642-901 Recommendations?
Hi all: I´m about to face the 642-901. I felt kind of confy two weeks ago, but now I´ve heard about so many people failing, that I´ll be preparing a litte more before diving in. To prepare I took the Boson training last week with the new courseware and thought it was preety good, however I´m still trying to get some decent…
-
arp and default gateway.
Hi guys am stuck....help!! How does a workstation use arp to determine if a host its trying to communicate with is in the local or a remote network? (i would have thought it would do a logical and but the books seem to say am wrong) secondly what is the role of the default gateway vis a vis arp?ie why would a workstation…
-
Cisco 2800 - Road Warrior VPN
A friend of mine has implement a vpn tunnel (road-warrior) on a 2800 series router (i don't remember the exact model). The thing is that he can't make 10 diferrent vpn tunnels and so one key is been shared between the users. Availability is critical and in this situation i don't think that exists. Neither confidentiality…
-
CCDA or CCNP?
Having just passed my CCNA, I have just spent a few hours familiarizing myself with the CCNP a bit. It seems we have new tests and very little material at the moment! So, my overall plan is to be CCNP and CCDP by the end of the year, with maybe some other stuff like a Linux+ and maybe a Windows Server MCP. Looking for some…
-
2610 IOS upgrade to 12.4
Hey fellows, does anyone know if a 2610 IOS could be upgraded to 12.4? I think I read on a previous post some where on this forum that it was not possible. Is is true? Thanks
-
Active unit and PDM warning replication message
I have got two PIXs, Primary and Secondary Primary (192.168.100.1) is Standby Secondary (192.168.100.2) is Active When I try to access the PDM from primary (Standby) I could not, but I was able to access PDM for Secondary (Active) Secondary’s PDM Tools --> Command Line Interface --> config terminal,,,,I received this error…
-
" failover active " command, Primary-Standby or St
I have read these two articles from two different resources http://www.informit.com/articles/article.asp?p=24686&rl=1 http://www.cisco.com/univercd/cc/td/doc/product/iaabu/localdir/ld16rns/ld16icgd/ld16apa.htm Isn't failove command issued on Standby PIX, whether a PIX is primary or secondary ? because in the first article…
-
PIX 515 Password Recovery
I am sure this has been answered already but I could not come up with anything on a search Anyone have another angle we aren't thinking of? www.cisco.com/warp/public/110/34.shtml or http://www.tech-recipes.com/cisco_firewall_tips639.html What I did monitor> interface 0 0: i8255X @ PCI(bus:0 dev:14 irq:10) 1: i8255X @…
-
Any info on 642-552 SND out there?
Hi all, I am getting ready to tackle the CCSP and decided to start on the 642-551 SND. But as you all know, it is now the 642-552 exam that is out. Other than the CBTNuggets, I don't see any study guides (Cisco Press, Sybex, etc) out there for this new exam. I feel that I can probably go through the CBTNuggets and take the…
-
QCT for CME
Didn't know where exactly to post this question, thought this was the most suitable forum. Anyone have any experience with the Quick Configuration Tool for Call Manager Express? I've followed all the instructions that I could find and the QTC doesn't seem to see the router. What I've done so far. 1. Loaded QCT 2. Checked…
-
642-901 Recommendations?
-
Cisco IDS/IPS box
Quick question: I was thinking about getting a Cisco IDS/IPS box for my home lab. I been looking on Ebay and have found a few. Now, can I run the Cisco IDS/IPS software on any computer? I saw a Dell 1u blade being sold as a Cisco IDS/IPS.... opers13
-
CatOs vs ios
Which came first? I persume ios Why was CatOs developed and is Cisco slowly moving to ios? I'm just wondering if its important for me to learn CatOs as i've seen afew jobs that require it.Would it be worth buying a cheap 5000 for practice or is this old school tat will be phased out?
-
Some explanation about the exams in CCNP
Ok im planning on takinh BSCI exam in like 3 months maybe? To get the CCNP you need 4 exam and thast one of those 642-901 BSCI Building Scalable Cisco Internetworks (BSCI) 642-812 BCMSN Building Cisco Multilayer Switched Networks (BCMSN) 642-825 ISCW Implementing Secure Converged Wide Area Networks (ISCW) 642-845 ONT…
-
Catalyst 3000
Has anyone had any experience with this switch? I dont think it supports the standard ios but maybe im wrong.Anyway i have the chance to get afew for next to nothing and since they support spanning-tree and vlans it might be a nice addition to my lab. Feedback welcome...
-
CIPT first....doable?
Hi Guys, I jst got my ccna about 2 weeks ago now as part of training for work. they now want me to do the ccvp and my manager has specified CIPT. I thinks that decision was mostly because he wants me to understand and be able to implement call manager issues sooner rather than later. I just want to know wether this will…
-
New BCMSN study book
Here is the new BCMSN Self Study that is looking very good! http://www.ciscopress.com/bookstore/product.asp?isbn=1587052733&rl=1 I read the sample chapter and it seems very easy to read... Might be asking why I care after I already have the BCMSN but I have been looking for an updated switching book that covers detail for…
-
POLICY BASED NAT HELP!
currently have an 1841 with an adsl interface going to the internet with a public static nat to 10.1.1.1 for the inside. Currently ALL traffic goes OUT of the D0 adsl interface which is becoming congested. To alleviate the congestion a separate 2mb leased line is being brought online, but this has a different network to…
-
A wee poll
Well seeing the great lull since the Xmas SND rush I figured we could liven the old CCSP board up a bit. These questions are for those who are finished with it and those still slogging through (like me). 1. Why did you pick the CCSP? 2. Did you achieve what you were aiming for in/while getting it? 3. What was your toughest…
-
Just got books. Looking for advice
Got my CCNA last week and decided this was the next place to go. Seems pretty quite here compared to the CCNA forum. 3 books were delivered by Fedex today. All Ciscopress stuff. Does anyone know how to read while you're sleeping. There's a ton of material here. Figured I'd start with the CVOICE material. Any…
-
CCNP study material!:o
Well im reading the curriculum 5.0 Currently studying for Building Scalable Cisco Internetworks (BSCI) exam Which study material you recomend me after i finish studying the curriculum? I might not be studying this because i got no experience :/ which i hope i get a lil of it in my Stage and well after that will try to find…
-
Hello, will be taking CCNA soon and want to prep for CCNP
I have been networking for around 10 years, not all Cisco though. I originally took the CCNA several years ago and am currently studying Sybex to retake it. My question is how to prepare for the CCNP? I have read several good suggestions in here but am getting kinda confused as everyone has their own opinons of course. I…
-
Question about MAC address rewrites and packet flow.
Do MAC address rewrites occur EVERY time a packet crosses a switch or are there any exceptions to the rule? Little confused about this issue so I need some clarification. I know for sure that MAC address type stuff is only used at the LAN level. Past the lan level it turns to straight DNS/IP address. If anybody can shed…
-
Dynamip tip
Just found on the web and hope it could help you ! http://www.virtualpod.org/video/ If you want to try the tool : Click Here
-
My 642-551 SND experience
I guess I am one of the last to take this exam before it retires on Wednesday! After my experience with the CCNA, I must say the SND was not as difficult as I had thought it would be. It was very general and only skimmed the surface of Cisco security, however, I'm sure the next exams towards CCSP will be quite challenging…
-
GlobalNet CCVP Training
Greetings everyone, Just a quick question to see if anyone has "recently" attended one of GlobalNet's CCVP bootcamps. I found a review from back in 2005 on this site that wasn't very good...however the author admits he was one of the first groups through the program. I'm curious if the have worked out any of the kinks.…
-
Schooling for CCSP
Does anyone know where one can go to get good schooling toward a CCSP? I'm not talking about a boot camp that lasts a week, but a school that goes in depth and is longer. I live in Jacksonville, Florida, so something near me would be ideal. Thanks. I've also heard that there's a much bigger demand for CCSPs than CCNPs.…
-
Etherchannel three ports on a 4948
How would i go about configuring three etherchannel ports on a 4948 gigabit switch? I know there is plenty of documentation on etherchannels around but i kinda have to have this up and running by tommorow morning :p So if anyone can give a brief example of what is best to use and the commands to do so, i would be very…
-
Is a 3550 really neccessary?
Hi CCNP peeps, I wanted to ask someone who might see this and have a CCNP already, do you really think that a 3550 switch is required to be able to get throught the CCNP? I saw that on Ciscokits.com, they recommended it in their CCNP labs so layer 3 swtiching could be seen. What do you all think? I hate shelling out $1000…