Book now with code EOY2025
I came across this topology on the FLG Route book. I did configure the bgp for all routers, but I'm having problems reaching network from R1 to R3 and vice versa. On R1 I'm advertising 209.165.200.224/27 On R3 I'm advertising 192.168.33.0/24 Any help is very much appreciated :D thanks! R1#ping 192.168.33.1 Type escape…
Hey Guys, I recently passed my CCNA a few weeks ago and have started studying for my CCNP RS (switch->route->tshoot) . I have x2 3560 at home I got from ebay and I'm looking to buy x2 2960 to complete my lab. From what I have read during my research x2 layer 3 and x2 layer 2 switches should be enough to finish my switch…
So, I'm still confused about LSA 1 and LSA 2. Are the LSA 1's flooded to all Router in the same OSPF Area, or are they just send to the DR? It seem logical that LSA 1's are not flooded but send to the DR, and from there the DR makes 1 types 2 LSA and floods these to all the router in the Area. Like the pictures below: Or…
Not sure which forum to post this in Security or voice. But i established a site to site vpn between a ASA and 1841 at the remote site. I am having trouble registering the 7945 located at the remote site to HQ. This phone was originally registered on site with the cme to make sure it worked before it went out to the remote…
Hi .. I'm need to get CCNP Security and I saw that exams will change in April 24, so it will not let me so much time to study for olders exams Like Firewalls and VPN. so I decide to start studying for the news exams. I will try first the exam 300-208. Anyone already taked this exam? Do you guys have any advice ? There are…
As much as I'd like to post that I just completed CCNP Security by slaying my last test (SITCS), I'll need to retake this test sometime in the near future after today's attempt. I spent way too much time taking notes and exploring the next-gen material on the blueprint, and I underestimated that this is actually an IPS…
I was always under the expression traceroute uses ICMP, but recently I learned that Only Windows uses ICMP for the request (Echo?) and the CIMP Reply. I've learned that Cisco and Linux/Unix uses UDP for the (echo??? or request, not sure how to call it). So I have a few questions: 1. Why are linux and Cisco implementation…
With methods I mean the following: Store and Forward Cut and Through Fragment Free Is there a command to see what is being used on a Cisco Switch, or is one of the methods the preferred methods and thus always used these day?
Any ideas why i cannot bring up this tunnel ? RP/0/0/CPU0:R1#sh mpls traffic-eng tunnels Sun Aug 9 01:43:29.727 UTC Name: tunnel-te1 Destination: 3.3.3.3 Ifhandle:0x480 Signalled-Name: R1_t1 Status: Admin: up Oper: down Path: not valid Signalling: Down path option 1, type dynamic Last PCALC Error: Sun Aug 9 01:38:49 2015…
Can anyone simple explain what this. Currently from what I'm reading it exactly the same as a prefix...... 192.168.1.0/24 = NLRI If BGP advertises a network/prefix it's called NLRI, correct?
It looks like you're new here. Sign in or register to get started.
Use code EOY2025 to receive $250 off your 2025 certification boot camp!