Book now with code EOY2025
Hi guys, can s.o tell me how to summarize these IPv6 routes correctly and explain me the way to do this ? fec0::120:1/112 fec0::121:1/112 fec0::122:1/112 fec0::123:1/112 for me it's fec0::120:0/110 but i'm not sure. Because: FEC0:0:0:0:0:0:120:0 FEC0:0:0:0:0:0:121:0 FEC0:0:0:0:0:0:122:0 FEC0:0:0:0:0:0:123:0 = :120: = 0000…
can you read this line by line so I can se how to read this. I am confused on remaining 40 and then remaining 30 how does that work? Thanks guys. policy-map pm-avpn class cm-voice priority percent 60 set ip dscp ef class cm-company set ip dscp af31 bandwidth remaining percent 40 class cm-branch set ip dscp af21 bandwidth…
How is ipv4 addresses converted to ipv6? Is there any tutoial? In the intrnet here are only auto converters.
Digium-Certified Asterisk Professional.(dcap) The dCAP test consists of a 150 question web-based exam concerning Asterisk and Asterisk-related technology, and a practical lab exam in which you are asked to configure a PBX according to a given specification. A minimum score of 75% is required to pass the web exam. To pass…
My understanding of port security is that aging defaults to 0 which means that MACs observed on a port do not age out. In practice on a 2950, they seem to age out immediately when set to 0 (or anything else). Switch-01#show clock *00:44:45.707 UTC Mon Mar 1 1993 Switch-01#sho port-security interface fa0/24 Port Security :…
Hello, I am working on a Cisco 1841 router and had to load it’s IOS back onto it using XMODEM due to accidently deleting the IOS from flash. To speed up the xmodem process I changed the configuration register to 0x3922 and then connected via console with a baud rate of 115200. The IOS was sent successfully and loads fine,…
Hi, im doing a lab on Eigrp default network advertisement that is part of CCNP ROUTE 6.0 student lab manual book. the scenario is with 3 routers where one of them as a route to the internet, the route to the internet needs to be advertised to all other routers as the default route. this route can be advertised by creating…
Hi all, We have implemented Cisco IP Telephony recently and are facing packet loss issues after deploying Cisco IP Phones. Physical connection details Access Switch ---> IP Phone ----> Computer. IP Phone is connected directly to the switch and computer is connected to the IP Phone. Obviously a separate voice and data vlan,…
Is moh supported over sip trunks for cme 4.1 or later? I had multicast moh working internally but it won't go out over the sip trunk, I removed multicast moh to switch to unicast moh but there is no moh internally, I removed the multicast moh command and added in no multicast moh under each ephone. Am I missing something?…
I understand that the default mode for switches is vtp mode server. In that case, if two or more switches are connected then who will "listen" to whom?
It looks like you're new here. Sign in or register to get started.
Use code EOY2025 to receive $250 off your 2025 certification boot camp!