-
Updated labs for 300-1xx exams
So when I first bought my lab book and FLG for another round of night classes, I got materials for the 642-813 exam. Fine and dandy, but 2.5yrs have gone by in a flash and all the exams have been updated. Right now I'm using version6 (i think) of the materials, and I'm looking for some updates. I'd like to start with…
-
Interface counters explained
Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 92 packets input, 10811 bytes Received 21 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 88…
-
CCNP 2016 Books : FLG or Chris Bryant Success Series
Hello guys, I scrolled through the forums and did not find any updated 2016 guide on ccnp latest books. I have narrowed down the battle between the OCG to FLG to picking the FLG as I have read that it is more complete and oriented to learning the pillars. However, I came across chris bryant CCNP success books on amazon ,…
-
How CUCM/CME know which phone should accept a call
[FONT="]Hi guys, [/FONT] [FONT="] [/FONT] [FONT="]I attached the diagram so that it would be easier for you to understand my question. There are two offices, A and B. A office has 7 495 7463449 number and office B has 1 312 9217816 number. Gateway, route patterns and dial peers are configured on both sides.…
-
EtherChannel Question
So, I purchased the CCNP Switch Lab manual and followed all the instructions. I have two switch ports on a switch that are trunked, in a native vlan 66, and configured to use pagp. The switch on the other end is the same. I noticed that the port channel interface defaults to native vlan 1. I noticed the CDP native vlan…
-
Packet Tracer and GNS3 IOU
Hi Gents, For those who have done the ccnp switch is packet tracer and GNS3 IOU sufficient to do majority of the labs. Thanks.
-
Certification expiration date questions
Hi, I have some questions about certifications expiration date and I can't find answers. -I have my CCNA since June and so until 2019. What if I get the CCNP ROUTE exam? What if I get the all 3 CCNP exams? -And if I have the CCNA until June 2019 and I pass the CCDA in september, what's happen? In fact I don't understand…
-
ISE and AD integration
Does anyone knows why ISE cannot retrieve groups from the AD? I have successfully connect the ISE with AD (the checkbox is green). What tshoot steps do you recommend ? Test connection from ISE GUI, doesn't reveal anything wrong.
-
FXS Proplem
i have CUCM 11.8 with GW 2911(4FXS and 8Fxo) i can make call from ip phone to fxs and fxo but can't make call from fxs and fxo to ip phone i need support
-
Is possible to pass CCNP ROUTE exam within 3 months?
Is possible to pass CCNP ROUTE 300-101 exam within 3 months by self-studying? My details: - Now, I'm not work in networking field. I'm in telecom field. (RF mobile => FTTx => next SP networking) - I recently passed ICND1 and ICND2. (CCNA certified) - Studying time is around 4-5 hours per day. Or maybe more in weekend day.…
-
Differences between two ccnp books
Hi, I've just passed CCNA R&S with 883 :) and now I want to begin learning for CCNP . I've found 2 books that seems pretty good but I don't understand the differences between them, can you help me please : CCNP Routing and Switching v2.0 Official Cert Guide Library AND CCNP Routing and Switching Foundation Learning Guide…
-
CCNP: TShoot - advise?
Hi Everyone, I am about to start studying for T-Shoot and frankly this test , at least the structure of the test, gives me a really bad feeling. Does anyone have any advise for preparing? Thanks!
-
Home Lab ethernet replacement for frame-relay switch
In the olden days we'd all use a router with a few serial interfaces configured as a FR switch. As FR has passed its use-by date I'm looking for an metro-ethernet like alternative for the physical home lab.* idea 1: I've picked up 3 x ME3400's along the way, as the telco's never come to decommission them, thinking of…
-
Silicom PXG6i Hex (6) port PCI/PCI-X adapter
I just ordered 2 of these beasts. =O it sounds amazing and I hope it will actually work just as amazingly. I've always wanted to build a GNS3 server, just like those you see online; 3x quad nic + 3550 +3560/3750. However, D-Link DFE-580TX are hard to find now-a-days, and Sun x1034a are just a pain in the **** to deal with.…
-
Eigrp route summarization and query scoping
I have read that route summarization will stop an eigrp query from a router from propagating beyond its next hop router. i would like to know how route summarization achieves this?
-
What does QOS use as a reference?
Does QOS on an interface take into account the line speed, or does it use the bandwidth configured on an interface much like a routing protocol would?
-
Redistribute between OSPF EIGRP issue
Hi, I'v got an exercise that including ospf with multi area (using virtual-link, because area 2 isn't directly connected to area 0 ) and redistribute between eigrp and ospf. i have problem with the redistribution. The ASBR is R6. I don't have ping between R7(that is running only eigrp) between all the routers (R1-R5) that…
-
Cool applet in Cisco to bounce a switch port based on a time of day WOW
giving back to yah my friends. I use this applet script to run every day to bounce a port on a switch to bounce an Access Point once a day. This is a temp fix until the WLC guys fix it. from corporate. They have to adjust the SNR ratio but cant do it fast since the entire corporation AP are tied to one big masssive group.…
-
Can you mix and match active\active and ASA5520 and ASA5512X together in dual ASAs?
if this is all you have in stock, can you active\active both as dual ASA topology? with and ASA5512x and ASA5520? i would think you could as long as IOS same and such?
-
Online access to Cisco Catalyst Lab
UPDATE: 2 routers and a tunnel to another lab site have been added. I'm a network engineer in the Washington DC area, and I have some switches I want to make available for people to use. You can access them here: telnet 72.205.54.70 49001 telnet 72.205.54.70 49002 telnet 72.205.54.70 49003 More switches will be added.…
-
Ccnp
if you pass one or two of exams and they come out with new set do you have to retake all exams?
-
Can anyone recommend a good networking book to read??
So I just got my CCENT the other day and can't wait to take the ICND2. I feel that right now I should spend a lot of time focusing on fundamentals and learning protocols and how data moves through networks. Can anyone recommend a good for this? Has anyone read Network Warrior recently? Its from 2011so I wonder if it is…
-
I am taking the CCNA Service Provider Certification Class: 640-878 SPNGN2
Hello all! I work for a service provider and they are bring in Global Knowledge to do a 5 day training course for the 640-878 SPNGN2 exam topics. I have not studied at all for the SPNGN1 topics and I think they are bringing in this course as it is more relevant for what we do day in and day out than SPNGN1. I am taking…
-
Failed Switch
Just came back from the test center. Got a score of 750 and needed 790 to pass. Screwed up on one sim, alot because the engine doesnt act the way the real IOS would, and i think i spent about 30 minutes on figuring out ways around it, improvising on the fly. When i finally got everything right i was so tired of it that i…
-
Cisco VPN-3DES-AES Strong Encryption
Hi All I'm hoping someone may be able to help me. Recently my home Cisco PIX firewall that I have been using for the last several years which serves my home needs perfectly died on me. I thought no biggy at the time as they're dirt cheap and plentiful to pick up second hand on Ebay so I found a cheap good condition PIX…
-
Passed SISAS
Took and passed SISAS today. The test was fair. The SIMS were a pain due to the screen resolution. I don't have hands on experience with ISE, but the OCG, CBT Nuggets, Cisco.com, YouTube helped out A LOT! I thought the test was rough and thought that I had failed it. I have one more test to take and I'm done! SITCS is…
-
VLAN tagging
vlan dot1q tag native This cmd will tag traffic from ALL VLANs including the native VLAN. Only way to untag traffic for a certain VLAN is to change the native VLAN on the switch via switchport trunk native vlan #. These are the only ways to tag and untag traffic right? Just want to make sure there is no other cmds to tag…
-
Security Association
Hi all, Why IKE SA in bidirectional and IPSEC SA is undirectional?? Regards, Bharath
-
Routing Protocol Question I cant understand
The OSPF dead timer is 3 minutes. But if I switch off a router for POC testing, the switchover is almost instant. Can anyone explain why?
-
Exam Content vs The Blueprint
Hello everyone, I passed my SWITCH exam and surprisingly failed ( Don't want to give details ) My question is : Why Cisco asks to "describe" a technology if it will ask a complex configuration during the exam ? Why It doesn't respect the Blueprint ? Example : Cisco asks to "DESCRIBE" some security topics in the SWITCH exam…
-
VIRL for CCNP
Is VIRL sufficient by itself for learning CCNP? The academic pricing of $80 for 20 nodes is attractive. I'm concerned about Cisco learning for the future with real equipment, given than IOS 15.x requires license keys that could get very expensive, depending on feature sets needed.
-
TSHOOT passed! CCNP Achieved!
I passed TSHOOT today making me a CCNP! I scored with a 951 and found the exam pretty good all round and I did expect it to be harder. Onto F5 certs and then to revist security + design!
-
MSTP config question
hello all assume that i have 1 switch(SW-A){e.g SW L3:3560} that i define 4 vlans on it(10,20,30,40) this switch connect to other 4 switch with each other switch hast one of the vlan(in order from left : 10 , 20 , 30 , 40 ) so i choose MST Protocol and i run VTP in all switch (1 server . 4 Clients) should i config other 4…
-
CiscoPress
I just wanted to let you know of summer sale on the Ciscopress.com website. "buy 1, save 30% or buy 2+, save 50% offer on books, eBooks, and video." the coupon code is "SUMMER" and the sale ends 31 of May. I managed to save a lot when I purchase three books the CCNP LAB Route, Switch and Tshoot for only 75$ :)
-
BGP Question
Hi, can anyone mind expanding & explaining on the statement below? Outbound traffic flow will be affected by bgp inbound policy.
-
Learning MPLS for interview
Recently talked to a recruiter for a Jr. Network Engineer position, I fit pretty well except for one requirement MPLS I know its gone over in at the CCNA level but they are asking for experience in it, I believe if I learned advanced MPLS configuration knowledge will override experience Anyone know some high level learning…
-
Xengoreth's CCNP Thread
With my CCNA Security studies winding down and hopefully a pass coming up two weeks from tomorrow, I'd beginning to focus more heavily on path of study more likely to breathe life into my dying IT career. I'm not really after the certification so much as I would like to arm myself with everything possible to become…
-
EIGRP Topology Table
From the OCG: Without learning topology data from neighbors the local topology is built from three sources* Prefixes of connected subnets for interfaces on which EIGRP has been enabled on that router using the network command * Prefixes of connected subnets for interfaces referenced in an EIGRP neighbor command * Prefixes…
-
Network Monitoring skills training
Hey guys and gals, where can i get some network monitoring training. I have not seen any courses say in wire shark and network monitoring and the sort. I am a network engineer and I do basic bench marking but I want a course of books or video training in networking monitoring skills is there such a thing or do you just…
-
Wireless
How do you study for ccnp wireless if there are no books?
-
CIPTV2 - Foundation Learning Guide (CCNP Collaboration Exam 300-075
Well... I know some of you guys have been waiting for something. Here you go for the "cheap" price of 55.99, but hey free shipping! Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Foundation Learning Guide (CCNP Collaboration Exam 300-075 CIPTV2), 3rd Edition
-
MPLS and NAT: same purpose?
NAT translate private ip address into public ip address to differentiate them. In MPLS private address is appended with a route distinguisher to differentiate them. In this case, those NAT and MPLS serve the same purpose? Why use MPLS then?
-
CCNP - Route : PASSED!!
Hi Everyone! I passed the Route test today. I must say that this exam was significantly tougher for me than the Switch test. Seriously this one was so hard I don't feel like celebrating. I did get a 866. I got so many materials over the last 18 months: CBT Nuggets, the official text books, multiple routers from ebay (and…
-
Routing Table vs RIB - Correct?
COrrect me if I am wrong: The RIB contains all routes from the same routing protocol. OSPF has its own RIB. EIGRP has its own RIB etc. The "good" routes are taken from the RIB to form the routing table which is in "show ip route". Thereafter, the routing table is parsed and the routes are stored in CEF table "show ip cef".…
-
CCNP RS (ROUTE exam) or CCNA SP, Which one should I go before?
Hello everyone, This is my first topic and I'm sorry for my poor english too. Now I worked for telecom vendor company and I planned to transfer my job role from FTTx Engineer to Network Engineer that focused on telecom service provider network such as MPLS, GPON, BRAS, IPRAN or some mobile backhaul/mobile core network…
-
TSHOOT: OSPF neighborship won't come UP
Dear all, I made GNS3 simulation and trying to establish OSPF between 3 routers (2 Cisco routers and one Juniper router (vSRX via Virtualbox)). OSPF between Cisco routers is good, but between Cisco and Juniper, well it won't establish neighborship. Scheme: https://files.fm/u/m4cwcysj#_ Neighborship statuss on Juniper:…
-
At-home lab for CCNP Switch and beyond
Hi gurus, looking for some advice on how to proceed with this. I'm looking to ebay an at-home AIO lab with 3x2821 (IOS 15.1) routers, 2x3750 and 1x2950 (all IOS 12.2) switches. I've got a myriad of questions and I'm hoping to get some concrete answers before making any purchases. The first step is attaining Switch, then…
-
BGP Route Redistribution For MPLS
Why are we using the vrf table & not the vpnv4 table OR the global routing table? I dont understand. router bgp 100 , address-family ipv4 vrf 1, redistribute eigrp 1 , end
-
CCNP route exam Prep
Hey guys, I am going into final prep for my CCNP route. If there is someone who want study with me i would more than happy to share my stuff . PM me if anyone intersted. Also I welcome any tips from experienced guys to help me out for the exam.
-
TSHOOT - Any Good Method on How To Approach The Simulation
Team - I came up short for the TSHOOT exam recently. I was confused on how the method was laid out. The sim did not allow me to do anything other than "Ping, sh run, sh ip eigrp, sh ip bgp sum and few other commands" I think I blew it because I was expecting to fix what was broken in the configs but, not so. Any ideas or…
-
CCNP before CCNA
hi guys!this is my first post here. i am a fresh graduate . during my bachelors, CCNA was part of my curriculum and i passed all the 4 parts with more than 90% marks in all of them. the standard of the courses were exactly the same as the certification exam (we studied the CCNA books from ciso,used the cisco devices in the…
-
Route filters and CSC
So I'm doing a lab with Carrier Supporting Carrier (CSC), and I have eBGP between the CE and PE with label distribution. I wanted to filter what I will be advertising to the PE from my CE, so I created a route-map and applied it as the export policy. My lab broke as soon as I did that. So I tried removing all the "deny"…
-
Materials for "300-115 Switch"
I usually use at least two books to study for exams. OCG and FLG. (Because maybe I'm paranoid). Both OCG and FLG are available for 300-101 Route and 300-135 Tshoot. But only OCG is available for 300-115. I'm doing the usual Boson and Pearson-IT combinations for practice. Has anyone recently pass 300-115 Switch? Is OCG just…
-
300-101 Passed :)
I finally passed my NP:Route exam with a 901/1000. Only TSHOOT remains! :D I used Chris Bryants videos and the official cert guide along with labbing. The exam itself tested on some quite obscure topics, but study good and you'll be fine :)
-
Something I really never Understood...
So with my company we tend to I think "over do it" when it comes to a failed devices on the network. Example: Major core switch fails, we generally shut down physical interfaces AND routing protocols to that device. I know it's always best to tread carefully in this type of scenario but I've never been able to get an…
-
EIGRP Stub Routers - Conflicting explanations in training materials
In Chris Bryant's materials, he explains that on a hub and spoke network, that the multiple spoke routers should be configured as Stubs, advertising their connect / summary routes and receiving a default route as the single next hop from the Hub. Another, better explanation I found on youtube said that it is best to make…
-
CCNP Security 300-209
CCNP Security 300-209Does anyone knows where I can get lab workbooks for this test CCNP Security 300-209? I have check INE and I am able to find for CCIE security only and I see that they are working on the CCNP security video series. Any input will be appreciated. Also does anyone knows when are the official study guides…
-
CCNP Switch exam topics - not fully covering whats on test?
Hello all, I like to look at the exam topics to know whats on the test and then study the technologies separately. When comparing whats in the OCG and on certain CCNP bootcams, it looks like there are topics they teach that is not in the exam topic blueprint. How reliable is the blueprint and should i expect technologies…
-
I was advised not to touch the route reflectors in an ISP
I understand what the RR do. It advertises next hop information so that the PE routers dont need to form a full mesh. The PE routers in turn store RD and RT information. However, I dont understand why I am not to touch the route reflectors: 1) There is another RR in the network for redundancy 2) The PE routers are also…
-
Going for ccna and start all over again
Im currently have ccna and switch ccnp But i feel that the matearials i used for ccna wasnt good should i start over?
-
study for 300-101 with CCNP ROUTE 642-902 Official Certification Guide
It possible ?
-
Anyone else studying or have studied for the SENSS 300-206 recently?
Hey All, Not sure if there is anyone else out there who has been studying or has studied and passed the SENSS exam but any helpful hints on maybe what Cisco is looking for you to study especially on the section below? mostly looking at like 6.2 and 6.3. Digging for information on your own and trying to guess what the…
-
NBMA OSPF Ethernet segment's line protocol not coming up - Any Ideas?
I have an NBMA network that I am trying to add an OSPF Area off a spoke router, R3, that's Serial interface Priority is set to 0 so the Hub is the DR. I then tried adding a segment off of R3, and I am seeing on both sides the interface is up/down, and I cannot for the life of me figure this out. I in the output of show ip…
-
10 Points from my CCNP Route
So i went in to do my CCNP route yesterday and somehow forgot my picture ID, the lady allows me 30 mins to go and get it, luckily i live about 20 mins away from the test centre. I then go on and confidently take my exam, press the end exam expecting a pass and see 780 and the pass score is a 790. While doing the exam i was…
-
Does completing CCNP Security recertify my existing CCNP R&S?
I have completed CCNA & CCNP R&S back in 2013.It is going to expire in 3 months. Now, I want to do CCNA & CCNP in security. (Possible for me as I work in security consultation department anyway). So I was wondering, if I complete CCNP security, will my existing CCNP R&S certification would be re-certified?
-
Cisco Equipment Datasheet
Pardon me if this is the wrong forum to ask. AC input voltage is to see the circuit breaker to be used. What is the power consumption, power rating, and POE+ values used for? My company expects me to know them. Gosh!
-
Service Provider Question
Happy Easter everyone! I have a question about taking the CCNA service provider exam. Right now I work for a major service provider as an installer out in the field. I'm looking to transition into an engineering role within my company hopefully. I got my net plus certification back in March and am now studying for my CCNA…
-
sniff traffic how
My boss wants to check the Layer 2 traffic and other stuff by connected a cable directly from our Netscout to the Charter Gateway LAN side to sniff. I said we could setup a vlan for sniffing and since our core has a trunk line to the DMZ switch in the room of the Charter gateway, we setup a vlan on the dmz switch that…
-
CCNP: Route - Am I ready
So, this last week I have nailed down big time with studying, hitting about 4 -5 hours each day. I'm loving it and the motivation is back. My question is, am I ready? I am confident with redistribution, OSPF, CEF, IPSLA, Netflow, EIGRP(ish), BGP. The only big thing I am yet to cover fully is IPv6 which is going to get done…
-
Free live CCNP lab access via ssh, first come first serve!
Hello, I have a home CCNA lab consisting of: 2 1841 Routers running Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(3)T1 2 2801 Routers running Cisco IOS Software, 2801 Software (C2801-ENTBASEK9-M), Version 12.4(15)T7 4 3560 Switches running Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M),…
-
What is the command to check the ingress Real time Traffic on Parallel Links of OSPF?
Hi Please have a look at the image What is the command to check the ingress Real time Traffic on Parallel Links of OSPF? I want to see "Real Time" incoming traffic on R2's both the ingress interfaces. marked as green. I am sending Ping or any other traffic from PC1 to PC2. I am also confused if the mechanism is called…
-
Call Center Admin management of 150 people
Hi guys and gals. would CCNA collab 1 and collab 2 certifictaion be enough education to run a callcenter as an admin engineer. or do I need CCNP Collab. What will CCNA Collab give me and CCNP Collab give me more. Do I need to be a CCNP collab to run a 150 person call center we have. PBX - cucm ACD - UCCX VM- unity IM -…
-
BGP Route Selection Question
I have a question on this statement: Choose routes that this router originated. What does it mean? Does it include loopback addresses? Does it include directly connected links?
-
Bidirectional Forwarding
Is BFD a checking mechanism for L2 or L3 remote link? Wikipedia does not state it clearly.
-
CCNP Switch Question
Hello all, Working on Chapter 2 in the OCG. It references things like a TCAM which is difficult to understand even after going on Google. Also, does anyone actually mess with SDM templates? In fact, on thede 3650s, I'm being told it used the advanced template and doing "sdm prefer ?" yields only that option, which I have…
-
Route FLG
I've used OCG for CCNA and CCNP:Switch. I'm using FLG for the Route and I'm very disappointed. The amount of grammatical errors and flaws in the content is blowing my mind. I'm running into grammatical flaws that are simple and some that ruin the message to the point I struggle to determine the point they were trying to…
-
CCNP 300-206 vs CCNP 642-618
Hi guys. I'm searching for almost 4 hours on CCNP 300-206 certification guide book, but there is'n anything. I just found a CBT nugget tutorial for it, but I think it is not enough for exam preparation. Now, can you help me with the powerful resources (books or E-books) for CCNP 300-206?? Can I study CCNP 642-618 book…
-
my CCNA R&S going to be expire
hi guys, my CCNA R&S is going to be expire. If now I pass only CCNP-Switch exam , before expiring my CCNA R&S. Will my CCNA R&S expiry date be as same as expiry date of CCNP Switch . or do I have to pass all three exams (Route/Switich/Tshoot) of CCNP, to extend the expiry date of my CCNA R&S? I'm confused. Please guide me.…
-
CUCM training in Chicago
hello, can anyone recommend good training center for CUCM in Chicago area? Thanks
-
Best CCNP bootcamp
Has anybody taken a CCNP boot camp from any IT training companies? I was looking at either the Intense School 12-day boot camp with onsite CCNP testing, or the Global Knowledge 15 day (3 separate weeks) training sessions. Cost and location are not a concern. Any insight would be great.
-
OSPF into BGP Route Filtering
Hi all, The other day I came across an issue when labbing whereby I couldn't filter my OSPF learnt routes which were being redistrubted into my BGP network. My question is: To filter redistributed routes for scenarios such as the above, do I need to apply the route map on the OSPF instance or the BGP instance? I guess is…
-
MSTP or Rapid-pvst?
1- which one do you prefer to use in your network? MSTP or Rapid-pvst or Rapid-pvst+? 2- if I run MSTP, do I need to run STP as well?
-
LACP port priority & system priority
I understand the use of lacp port-priority as it determines if an int is active/ standby in an etherchannel but I do not understand where the lacp system-priority cmd would be used or why.
-
Where to learn how to design networks?
Question as above. Are there any cisco design tools or where can I go to if I need help?
-
EIGRP Stub Assistance
I wrote this on another post, but I figured it might get more action if it has its own post. I have 3 routers, two of them are configured as EIGRP stubs, but they are forming an adjacency? R2 and R3 shouldn't be forming an adjacency, from what I know. Can anyone help me clarify? R1: R1#sh run | sec eigrp no ip…
-
NX-OS connected routes redistribution into BGP
Dear All, NX-OS route distribution require a route-map. So, I am trying to redistribute lot of connected and static routes to BGP in a VRF. Is there any solution without making a prefix-list with all the static and connected subnets ? I tried the configuration below but it does not work : route-map static-to bgp permit 10…
-
Stack Wise restrictions
Does the Stack Wise technology have restrictions on what equipment can be stacked together. Can non poe and poe switches be stacked? Do the switches need to be the same version of the ios? I'm look to stack a 3750 V2 poe switch running version 15 of the ios with a 3750 non poe switch running a 12.2 version of the ios. Can…
-
Route
First day/night of actual study and I am spending more time troubleshooting stupid GNS3 crashes. UGH. I am using Bryant's new book, following along with his videos and the OCG. I want to get my EIGRP on. This is really frustrating. /rant.
-
CCNP-Route: Recommendations for a Netflow lab?
Hi Everybody, Does anyone have any recommendations for labbing Netflow? Thanks! Node
-
Redistributing Loopbacks into EIGRP
Hi guys, I am trying to redistribute some routes from OSPF into EIGRP. Please see the next example: http://postimg.org/image/pc1cztm0z/ Description: I am trying to Redistribute Loopbacks 0 and 1 from R3 and R4 (OSPF) into EIGRP. All of the other loopbacks are being filtered with a route-map before being redistribute.…
-
EIGRP over Hub and Spoke Frame Relay - Goodbye packets when opening LAN interfaces?
I finally overcome getting interfaces all pinging, EIGRP routes propagating over a hub and spoke Frame Relay network (Chris Bryant setup), and I turned off the LAN ports so routes would not be learned over that to force feed FR to myself and make this work. (Edit: Topology shows Area 100, meant to be AS 100) So I got the…
-
CCNP-Route: 300-101: Official Textbook Errata
Hi Everybody, Brief rant - The magnitude of the errata for the official text book is very disheartening. It would make the book seem useless. End Rant, Node
-
Prerequisites for CCNP Security
Guys, I have valid CCNP Routing and Switching. Do I need to pass CCNA Security in order to be eligible for CCNP Security certification?
-
Passed My CCNP!!!!
I finally finished my Tshoot exam couple weekes ago. I'm a full CCNP R&S now!!!! It's a million dollars feeling let me tell ya'll. I labbed real hard for last 3 months. I used the regular Cisco Press Tshoot book, INE & CBT Nuggets videos. Also was able to get some sample pre-created trouble tickets from a buddy of mine &…
-
Passed CCNP Switch 300-115 today
As the title says, I passed 300-115 today with a 953/1000. I had failed it last week and only missed it by a few points, so I scheduled the re-take asap! I used the 300-115 OCG, the 300-115 quick reference guide, Chris Bryant old and new videos, the old CBT nuggets, the old OCG, Switch Simplified, and my home lab along…
-
VPN revocation error?
I have managed to successfully configure a SSTP VPN connection on my internal client PC, but only through registry fixes. I keep getting this error relating to checking to see if the server has been revoked....... "The revocation function was unable to check revocation because the revocation server was offline." I've gone…
-
CCNP Route - Bandwidth Delay Product
Hi Everybody, The theory behind bandwidth delay product seems very hard to apply. The basic example is 768kpbs x 100ms equals 76,800 bits. However applying this is very hard. Once different conversions are needed the theory seems to go out the window. For example: 128 kpbs with a delay of 2.5 seconds should be what? My…
-
Senss 300-206
I've been watching the Keith Barker Videos for this exam on CBT nuggets and he refers to CCP a little bit. Does anyone know if Cisco tests for CCP knowledge on this exam or do they concentrate on ASDM / CLI now? I would again hate to spend time learning and studying material that nobody uses and hopefully Cisco doesn't…
-
How do you study? (study technique)
Hello, Im curious to know which way you find is most effective when studying for certs? Do you: 1. Study one technology until you know it like the back of your hand until you move on to the next, and only come back to it for review before the exam. or.. 2. Read from first chapter to the last (or watch the first video to…
-
CCNP Route - track 2 ip sla 11 state | reachability ?
Hi Everyone, The Route study guide specifies the command: track object-number ip sla sla-ops-number [state|rechability] My problem is that i can not find a single IOS that supports this command. Can anyone suggest a IOS that supports this? I am worried I will buy yet another router that doesn't support it. Thanks!