-
CCNP-Route: VRF-Lite - % VRF practice not configured. - Unknown vrf specified
Hi Everyone, I'm baffled by this one. I am running a Cisco 2600IOS, Ver 12.2(24) in GNS3 when I try to configure VRF-Lite, I get these errors: R3(config)#ip vrf practice R3(config-vrf)#exit R3(config)# R3(config)#int e1/1 R3(config-if)#ip vrf forwarding practice % VRF practice not configured. R3(config-if)#…
-
Passed ROUTE
It took me 6 months of studying for this beast of an exam but managed to get through it with a 847. When I saw the score, I almost blurted out a loud, "yes!!!", but managed to restrain myself. This was my second time sitting in for the exam. I used the official cert guide, bryant's videos, cisco academy lab guide, gns3 at…
-
CCNP ROUTE lab - ISRv1 vs ISRv2
So, I am currently studying for the CCNP. I have a couple of sims, but I am also building up a small lab with hardware. I have a 2851 already and also an 1841 on the way, along with two 3560s. The recommendation is to have 4 routers. The ISRv1 are cheap enough to do this, but if the ISRv2 - eg 1941 - has some huge…
-
CCNP Study group sessions via Webex interest check
I am starting to hit the ROUTE material hard from the beginning, and it occurred to me that my job affords me the opportunity to setup webex meetings whenever, so wanted to see if there is any interest in a study group? If your not familiar, you can dial into the webex online meeting by phone and share screens, not a lot…
-
Ingress and egress queue / buffer
The context of all of this comes from QOS studying. Cisco has stated that queuing is an outbound / egress concept (which is why traffic shaping can only happen outbound on an interface), and only a few of there products even do ingress / input queuing. So why is it that an interface always shows an inbound and outbound…
-
CCNP R&S INE Videos
Hey guys, Never heard of this company till today, I did a quick search on this site and user said they have used it but no reviews. I enjoy CBTnuggests (Company took away the subscription) and the Bryant videos put me to sleep. So anyone use them before and find it helpful? Specifically for CCNP R&S. Thanks
-
CCNP Security LAb Equipment
Hi guys. I have 4 x 2811 routers and 4 x 3750 switches left from CCNP R&S lab. What else should be added for CCNP Security? Thank you.
-
taking CIPTV2 for the 3rd time today
I've been studying since November for this exam. Most of the the exam objectives you can find in the SRND and admin guides. First time I missed it by a few questions, the 2nd time I bombed. Hopefully I'll be back with some good news today
-
CCNP Switch Labs?
Hey! Im looking for a lab manual for the current version of CCNP Switch 300-115. Anyone knows of one?
-
Boson Vs. Pearson Test Engines
I have been look at getting the Boson Practice Test for the Cisco CCNP Switch exam 300-115. Then I looked at the Pearson e-book with practice test. Has anyone use either of these, and which one would be better? I am not going to buy both. The Boson only comes with some 160+ questions. But the Pearson saids it comes with…
-
CIPTV2 lack of resources
Here is a sample of my notes I'm using for study. Since we don't have a book. I'm taking the exam objectives and going through the SRND's, the admin guides to make notes. I'll start sharing these if there is some interested. I also have a test bank, but I'm not sure if I'm ready to share it yet. I don't know if my…
-
MSTP Preventing Loop Question
hello alli have 3 questions please help me 1-while i want to run MSTP (maybe with VTP V3 or VTP V.2) must I config in all switches(Both Layer 2 and Layer 3) as i show in picture scenario?i mean i should type commands:spanning-tree mode mstspanning-tree mst confrevi ...name ...inst ....in all Switches ?NOTE: I run HSRP in…
-
CCNP Switch 300-115 Testprep: Boson vs MeasureUp
Hi, I wanted to shed some light and get some discussion going on this. I've been preparing for this exam using Boson. Labs and questions were straightforward and as someone who has taken a few Cisco exams it really had a good feel for what you might see on exam day. Though keep in mind i have not taken the exam yet. After…
-
Passed the 300-101 Yesterday!
Hi All Been a while since I added a post so here were my thoughts: - Make sure you know the finer details for the exam. Check the Blueprints and brush up on the trivia stuff - The labs and Simlets werent too hard as long as you lab up enough! THey don't reflect the multiple choice questions though.. I thought the Labs were…
-
Study Material for CCNP: Security
Hi After spending 18 hours watching what i belived was the latest CCNP: Security track videoes on CBTNuggets i found out ive been watching the old videoes..... I know my time is not wasted, but i'd like to actually study for the actual exams i have to pass.. So for the 4 new CCNP: Security exams, which study material would…
-
Redistribution/Route Filtering
I'm currently messing around with redistribution and route filtering, but I have a few questions. What's the preferred way to route filter? I found at least 4 different ways to accomplish the same thing. 1. filter right from the redistribution command using a route map redistribute ospf 1 route-map rmap1 2. filter using…
-
Qos Bandwidth Vs Prioirty
Can you please help me understand with a working example what is the difference between Bandwidth Vs Priority when it comes to QoS implementation This is confusing Router(config)# policy-map policy-name Router(config-pmap)# class class-name Router(config-pmap-c)# priority kpbs [bytes] During congestion conditions, the…
-
View flash from rommon Cisco 1900 router?
Hello, I am trying to view flash from rommon on a Cisco 1921 and no matter what I do I am stuck with the following: rommon 10 > dir flash: Please reset before executing this command rommon 11 > dir usbflash0: Please reset before executing this command rommon 12 > dev Devices in device table: id name flash: usbflash0…
-
CCNA/CCNP home lab
Hi. I've been in IT for a long time and have begun studying for the CCNA. I have some networking experience and don't find the material that difficult but it is interesting and challenging. My job involves some troubleshooting already and I have a lot of time to study in general. After the CCNA I plan to tackle the CCNP…
-
Question concern earning CCNP data center certificate..
Hey, Please answer to my questions if you have worked in Data center industry for couple of years and have at least ccnp DS certificate, I came from CCNP R&S work experience and prespective, From what I see On Cisco site we can choose either "Implementation+Design" or "Implementation+Tshoot", right? I wud like to know…
-
Cisco ISE Traning
Hi, Have anyone here attended the the cisco training course "Implementing and Configuring Cisco Identity Services Engine" and wrote the exam 500-254? I have been working a bit on Aruba ClearPass but never touched ISE so I'm excited to see how ISE compares to ClearPass.
-
Core Routers Are Used For Transition Purpose
I was watching a video that mentioned that core routers are used for transition purpose. In a service provider the purpose is to route traffic unlike an application provider in which it is a destination. In that case why can someone ping the core routers even though they only label switch packets?
-
Frame Switch / NBMA network necessary or even beneficial in home lab?
I am about to dive head first into ROUTE, and wanted the advice of those who have been through it. I have frame switch sitting logically in the middle of routers simulating an NBMA network, as can be viewed on the attachment. I have not barely began to crack into the depths of routing protocols, just getting the lab fine…
-
Ospf nssa
Can anyone provide an example real world scenario where OSPF NSSA would be or has been used? My understanding of the theory is that a NSSA can contain an ASBR (unlike Stub areas), and this ASBR can redistribute external routes as Type 7 LSAs (basically type 5 LSAs in disguise). So a NSSA allows us to connect an ASBR to…
-
CCNP Switch
I am currently studying for my switch exam using Chris Bryant's video + book. What other materials have you guys used to passed and what do you feel like was most effective?
-
Virtual Labs for CCNP
What are some good virtual labs that you experienced Cisco guys can recommend? How close are these labs to the real thing (that. using actual Cisco equipment). thanks in advance for your input.
-
FIB and a VRF question
Does any vrf have a seperate FIB or they all have same FIB?
-
L2VPN and L3VPN
Can I customer order both L2 and L3VPN at the same time? In that case, are the two CEs sites placed in the same subnet or different?
-
BGP Ping test
Please help, From R1, i can ping the loopback IP(3.3.3.3) that was advertised via BGP. But from R3 cant ping the loopback IP's of the R1 that was advertise via BGP. R1 ----EBGP---- R2IBGPR3 Kinly see below config: R1 interface Loopback0 ip address 2.2.2.2 255.255.255.255 ! interface Loopback1 ip address 192.168.1.1…
-
How to configure "Power inline" & "switch database manager" on GNS3?
When I put some commands in GNS3 it says that the command is not recognized. What's the problem? How Can I fix it? (config-if)#power inline ... not recognized (config)# sdm prefer ... not recognized
-
hey guys are you willing to help a little here,,,,,
[h=2] hey guys are you willing to help a little here,,,,,[/h]i want to create a voice lab at my home,,,i have 2801 router installed cme 8.5,,,,i didn't get unity express to attach with cme. what i got only is CUCM Business edition,,,,and installed on vmware player,,,,I am just starting to go on with the help of reference…
-
CCNP T-Shoot`
Two more final labs to go. BGP and IPv6, then its on with the exam. :)
-
VIRL in windows 7
Hey guys. I have VIRL as a vm in VMware 12 on my windows 7 machine so it comes up as Linux and you can launch Maestro. But Is there a version of (just as good as Linux vm version) for WINDOWS 7 native only? Can I install maestro on windows 7 just by itself. The reason I ask this is Anthony Sequaria from CBT Nuggtes has his…
-
Should I Go After a SOC Role? Need Advice
So I work for a very large organization with silo'd IT groups spread all throughout the company. I've been toying with the idea of moving on from my current position because I have basically reached a limit where I am hardly learning anything new frequently enough and am feeling very under challenged. Most of my current…
-
IPv6 Router Advertisment Default route
Hi, can some one help setting up a router to use RA to set up the default gateway? I have this on the router interface R2#sh ipv6 int f0/0 FastEthernet0/0 is up, line protocol is up IPv6 is enabled, link-local address is FE80::CE03:5FFF:FE10:0 Global unicast address(es): 2001:12::CE03:5FFF:FE10:0, subnet is 2001:12::/64…
-
Ccnp r&s
Good day I used to have a cracked Visual CertExam during my CCNA preparation ,and that s for 3 years ago.I am preparing my CCNP exam and am looking for a free or affordable simulation software ,the likes of Visual CertExam. Any suggestions? With regards
-
EtherChannel load balancing
Having trouble wrapping my brain around etherchannel traffic distribution. When using src-dst-ip a Cisco white paper calculates the following: test etherchannel load-balance int port-channel 1 ip 1.1.1.1 2.2.2.2 Computed RBH: 0x5 The CCNP OCG leads me to believe I should use the last octet and end up with the following:…
-
Scheduled to take ROUTE on Friday. Need Advice
Hey guys, So I am finally scheduled to take the CCNP:ROUTE exam this Friday. My plan was to start studying right after I passed my CCNA exam last June but that didn't pan out because I was swamped with school and work. Anyways here is what I have done to prepare for the exam: - Read and thoroughly took notes on OCG Route -…
-
Renewal
Long time lurker, first time poster - Great forum! I passed my CCNA in 2003 (No specific track back then), then completed the CCNP soon afterwards... managed to renew them for a while then work commitments got in the way and everything expired in Sept 2014 Currently on the road to recovery, renewed my CCNA R&S in December,…
-
help
please i need Crack Visual Cert Exam Suite 3.4.2 urgently.can anyone helpe me out?
-
ios-xrv on gns3 running on macbook
hi guys, im struggling with setting up my xrv on gns3 on my macbook. ive installed virtual box imported the vm on gns3 but i cant seen to ping my router 7200. the network adapter on the gns3 is host-only but i cant seem to ping. ive tried to configure the ips and ping then delete the interfaces between the xrv and the 7200…
-
Redundant Network Design
Hi I'm designing a redundant network design for lab purpose, but are struggling with the convergence time.. Heres the setup: The requirement to the task is that traffic between each vlan has to be filtered in the firewall, and therefore i cannot place routing on my core switches otherwise the vlans would be able to reach…
-
Tshoot
hi guys passed my ROUTE exam at Cisco live 2015 all I have left is TSHOOT to get my CCNP yeah! but is the TSHOOT exam 18 Sims do you fix our issue or do you run show commands to answer the 3 questions for all of the tickets. 1. domain 2. device 3. solution ? how many questions and is it all fix sims? Can I ask this?
-
Difference Between Prefix, Link, Route and Interface
I need help with the below statement: In BGP attributes belong to routes not links. In BGP attributes belong to prefixes. In IGP, cost belong to link not prefix Q1 I assume that routes and prefixes refer to the same thing? Q2 Both sides of the link are in the same subnet range so what is the difference in the prefix and…
-
RSTP Topology change propagation
I am having an discussion on RSTP with a peer about TC updates. They said if the port is not configured as an edge port then whatever its connected switch or non switch device(pc) can trigger an TC update. I'm under the impression only STP participating ports will trigger the TC update not any port not configured as an…
-
Combining 2 OSPF Area 0
Assume that I have 2 different companies that are running OSPF area 0. I want to combine them together using bgp. Is it possible: 1) If they have overlapping ip addresses? 2) They dont have overlapping ip addresses?
-
question CCNP SP and CCNP DC
hey guys so you have to take both CCNA exams in both CCNP SP and CCNP DC track before you can move on to the CCNP track? like example: CCNA DC has 2 exams you have to take both before going on to becoming a CCNP DC? same for CCNA SP? you have to take both exams before you move on to NP for SP CCNP? thanks.
-
CCNP Switch lab options
Hello everyone, I am about to start studying for CCNP Switch and I want to know what my options are as far as labbing goes. I really want to avoid buying switches so if gns3 or VIRL is an option id like to go for that, or perhaps theres a decent ad cheap rack rental service that would be a good choice?
-
Starting My CCNP Classes
Hi am vishnu from india, just 15 days before i started my weekly classes on CCNP RandS , i was thinking CCNA is one of the toughest exam as everybody told me the same but after going thru the concepts i dont think we have any easy exam below that. I studied Todd Lammle book and videos for Mike Wallace (Cisco press) i…
-
CCNP switch down. Tshoot time.
Passed switch today, freaking had to wait like 4 mins After I was done to get report....seemed like it was 3x longer than that. WGU semester started Yesterday..so looking to finish out last 35 cus and study for TShoot...figure I can tackle both within 4 to 5 months.... Kind of want to keep the train going though now that…
-
CCNP Humble Beginnings
Hey All-- I'm starting my CCNP journey today in earnest, hoping to finish in the next ~7-9 months. I've decided to take on CCNP Route first; and I purchased the CCNP Route Simplified book. I appreciate any and all advice you guys may have for me, for additional study materials and general advice. Thanks! -sigg
-
DataCenter Lab buildout
Hi folks, We are in the process of refreshing our 1st gen Nexus gear (7010, 5020, 2148 ) and I was wondering what, and how many, devices would be best for a DC lab. My guess is: (2) 7010 (SUP1, M1 cards) (4-6) 5020 (4-6) 2100 We have a lot more gear that we are pulling out - but I want to see what to grab before we start…
-
Passed TSHOOT: CCNP R&S Achieved
Hey guys, I just got back from the testing center and happy to report that I passed with a 987/1000. This is the list of materials I used in my CCNP journey: 1. OCG Library 2. FLG Library 3. Simplified Library 4. How to Master Trilogy 5. 101 Labs for CCNP(GREAT book!) 6. Labs on GNS3Vault 7. Boson NetSim for CCNP 8. Boson…
-
Static Routing Problems
Hello, I have been trying to configure two static routes without success. If anyone is able to help me, it would be incredible. Right now my network is designed like a tree somewhat. I have:* My ISP's Modem/Router with Static IP's (10.1.10.1) -LAN * One Router Connected to the Modem w/ NAT & DHCP (10.1.10.2) w/ a LAN…
-
What are the exams like?
I'm currently studying to earn my ccnp and was just wondering how the exams are at the ccnp level. Are the exams similar to the CCNA where it's almost all multiple choice with 2-3 simulations?
-
0 to CCNP realistic time frame?
Hey Guys, I just seen an older thread and a forum member was talking about how a guy went from 0 to CCNP in 3 years but he also said he studied every day. This seems like a long time for studying every day even with no prior knowledge. Is this realistic? Meaning Net+, CCNA CCNP in a 3 year time frame? I would guess half of…
-
Good reason to go for CCNP?
Hi, i recently got my CCNA and prior to that the Network+ along with my BSc in computer science a couple of years previously. I have not actually been employed per say in a networking role before and have been doing self employed computer/network technician roles to support my learning and myself in general since leaving…
-
TShoot and CBT nuggets
Has any one done the CBT nuggets Keith Barker lab exam nuggets? And if so a does the difficulty level of issues compare to the actual exam? been a while as had other things on my mind lately, wife has been very ill so taking time of study (and this site). But now shes on road to recovery I want to put CCNP to bed. Cheers…
-
CCNP route - Netflow?
Hello, i am studying for CCNP route and apparently Netflow is on the syllabus: 6.11 Configure and verify Cisco NetFlow* 6.11.a NetFlow v5, v9 * 6.11.b Local retrieval * 6.11.c Export (configuration only) I cant however find a section in the Official Study Guide where this is covered, or am i missing something?
-
OSPF Virtual Link
Type 1,2,3 LSAs are flooded across virtual links. Type 5 and 7 are not flooded. How about type 4?
-
Using RJ45 port as standby for SFP Port
Hi, I understand that only either the SFP or the RJ45 port can be used at any one time. In that case, is the switchover to RJ45 automatic if the RJ45 fails?
-
Cisco Test Vouchers Discounted
Is there a vendor which provides a discount on cisco test vouchers (Normally, $250 for 64x.xxx)? Thanks
-
Getting VLANS subnets into EIGRP from a switch?
I have 2x Class C's at a datacenter. The router has a /29 for the outside interface. I have a /23 (x.x.x.1) assigned to my inside interface. I have a DMVPN (as part of my CCNP route studies) with EIGRP going back to my house and I can ping all IP addresses remotely. AWESOME! Works great! Next, I'm using a 3560 switch…
-
Information for passing CCNP Route
If you are being training with a website that gives you netacad access you may not need this stuff. They we do exam **** questions and labs that are like the one on the test. If you want to pass like I did but only have the books then this is the guide for you. First if you passed your ccna without netacad, then you will…
-
Unsure what to do here
Hello I am a bit unsure on what to do My CCNA expired in September 2016. Ive already been studying to do the CCNP - Switch Exam, but so far just done most of CBT Nugget videos Next I will read the official ccnp-switch book and do labs Now my dilemma is i just landed a great new job which is more desktop support and focuses…
-
After CCNP what should study ?
Hello everybody. I like routing... so, ¿what is the best next exam or study I have to take ? Maybe Service Provide.?
-
Put 500,000+ BGP routes in your Cisco lab or GNS3 for testing with this VM
Here is a VM you can download that will allow you to test the load on a router or multiple routers with a full IPv4 Global BGP table of over 500,000 routes. Put 500,000+ BGP routes in your lab network!!! Download this VM and become your own upstream BGP ISP for testing. | StubArea51.com We put the full feed in a MikroTik…
-
PAgP Port-Priority a mystery....
Hi there, this is spinning my poor brain, I think I am getting PAgP port-priority wrong, this is not like LACP port-priority or is it? Is it only used with PAgP learn-method physical-port and port-channel load-balance src-mac? Please provide lab able example and its real life use Thanks in advance
-
CCNP has been obtained!
Hi All! Passed the exam (by 10 points! ) T-Shoot on Saturday. I've had extremely extremely slow activity at the job since X-mas break, so I've spent the better part of everyday connected to my home machine and connected to my lab and going over everything I could. The last two weeks I went over my Routing notes (Thank…
-
CiscoLand vs. CiscoKits
I am looking to buy a lab to start studying for my CCNP. I have only run across a couple of sites, Cisco Land and Cisco Kits, that seem to have what I am looking for but I am having a hard time deciding which site to buy from. I have a $2000 budget for all of the equipment + rack mounting + shipping. One of the questions I…
-
eigrp metric calculation when redistribute
hey i have put up in gns3 this topology : now i used at R1 boundary router under eigrp process this command : redistribute ospf 20 metric 1500 100 255 1 1500 the metric i get at R2 are : 1757696 and i dont get how does it adds the internal link between r1 and r2?
-
AAA Config on MDS 9000 SAN Switches
Hi Guys, Just looking for some information on applying aaa to MDS 9000 SAN switches. Is it the same config you would use for any other switch or is there anything specific I need to do? Cheers Alex
-
IPv6 named EIGRP help
Hello all, I was working on IPv6 EIGRP today and learned a little bit, but I am confused about the named EIGRP aspect. Under IPv4 named format, you still use the network command it seems to enable interfaces for that EIGRP instance, but you do it under address-family configuration. Under classic configuration, I understand…
-
N7K-SUP2E standby sup failed to boot
Just got a refurbished N7K-C7010 with 2 sup2e cards installed. I have to validate its fully operational before giving the ok to purchase a really expensive license. I booted these cards up separately and they boot up fine without any errors. Both engines are the running the identical software but for whatever reason when…
-
Recommended self study books for CCNP R&S
Just looking for some input on favorite self study books for the ccnp tests. Was using the odom books for the CCNA. Thanks fellas
-
Calling all NAT experts help I have no clue
Okay. I have done Public interfaces on a vpn router with IP NAT OUTSIDE but never the reverse. I see on this job I am at where they did this.' Public facing interfaces get IP NAT INSIDE Private facing interfaces get IP NAT OUTSIDE it works but weird to me what is the difference. I don't really know here..thanks.
-
CCNP Group on Skype
Dear heroes, I have created a group study on Skype to work hard and motivate each other for the CCNP Routing and Switching. Since I self-study for those exams, I would like to get in touch with other people to share ideas and help each other. That's the link in case you want to join the group.…
-
Cisco IOS vpn with main mode
Wondering if anyone can point me in the right direction with this as I am not skilled with vpns. I need to connect a software vpn client (shrewsoft vpn as it supports main mode) to a cisco ios router. Cisco ipsec client can only connect with main mode using with digital certificates and I don't want to venture there yet.…
-
Finally Passed SITCS and now I'm CCNP Security Certified!!!
Hello All, Just took and passed SITCS. Scored 905 which concludes the CCNP Security track for me...FINALLY! A month and 2 days ago I had the 1st attempt at SITCS which did not turn out well for me...I failed, came home and cried myself to sleep :.o( Here's the link to that thread if interested:…
-
Metric and Forward metric
I dont understand what are the difference between these 2 terms. e.g. 10.1.6.0 [110/20] via 10.1.13.3 110 is the AD, 20 is the metric but what is the forward metric? Is the forward metric same for both EIGRP and OSPF?
-
VTP Advetisement types question
Well Forum, Happy New Year!! Started my CCNP Switch studies last week and I am on Chapter 4 of my Chris Bryant CCNP Switch guide along with my CCNP R&S CBT Nuggets series. So far things are going smoothly but I have 1 question in regards to VTP advertisements. Per Chris Bryant's guide, Summary advertisements are sent every…
-
Narbik's CCNP->CCIE Book
I was not sure whether to post this in the CCNP or CCIE section but has anyone heard of any updates of Narbik's new book? Iris mentioned it in an earlier thread http://www.techexams.net/forums/ccie/115995-virl-ccie-route-switch-study.html but apparently Narbik is working on a book intended for CCNPs to get ready for CCIE…
-
CCNP Route command List
Hi everyone, I have begun my prep for CCNP Route exam and most probably will be ready for the certification by feb end. I have started maintaining a document in which i am listing all the important IOS commands and their description. Just wanted to ask if anybody has a document or pdf already for this. It will save me some…
-
CCNP Am I ready?
Hi all, similar to Robbo777's post I'm 23 I currently have CCNA R&S and in a position where I feel not under my head but near too in my current role, network engineer. Our network engineer had left last year and I went from service desk to fill his role along with the Sysadmin tasks. I don't actually have much experience…
-
Do you need to know Ethernet cable specifications for CCNP:SW?
Title pretty much says it; Do you need to know Ethernet cable specifications for CCNP:SW? For example, do I need to memorize the Ethernet cabling information, such as the diameter of fibre cables (10GBASE-LRM) or the distance it can span? The blueprint or syllabus of the exam doesn't suggest it, but I'm asking just to make…
-
CCNP - Video / Book learning
I apologize for the repetitive post as I know I've asked this before, but I wanted to get an opinion from the fresh wave of CCNP candidates, regarding how they study using books / videos / labbing. I was wondering how you guys go about mixing the three, if you watch a video first on a particular subject then read the…
-
Should i go for the CCNP?
Hi, I'm wondering if i should go for the CCNP and what goes into passing it, e.g Are there more than 1 exam? Or can it be like the CCNA where you take one big exam for the certification? My relevant qualifications are: Bsc Computer Science CCNA Routing Comptia Network+ The thing is, I have only ever really worked for…
-
CCNP Lab Books/Work books
Hello all, Just wanted to ask for some suggestions in terms of lab books for the CCNP R&S. - Are there any that you value higher than others? - Can you purchase INE workbooks/labs separately from the videos? (I had an email in about that) - Any good free ones that you know of? Appreciate the input, J
-
Multicast Address 224.0.1.40 - Discover Candidates
Q1 According to wikipedia, The Cisco multicast router AUTO-RP-DISCOVERY address is the destination address for messages from the RP mapping agent to discover candidates. May I ask what are the "discover candidates"? 1) Is it the RP and the normal PIM join routers OR 2) Is it just the normal PIM join routers only? Q2 I have…
-
SSL and IPSEC bandswith allocation?
I am wondering how much bandwitdth is given to traffic in a SSL tunnel? say your router port speed is 100/100 and SSL citrix portal runs through this. With or without CBQOS say on SSL, how much bandwidth speeds is for citrix or traffic inside the tunnel? How do you figure this out and can you use CB QOS on this SSL traffic?
-
access-list line number weird issue
okay. I add a line number to my access-list say 50 permit 192.168.1.100 but when i look it shows on all my routers the same sequence. It shows the highest line number always on top. It does it to all my routers. what the heck? why doesnt it put it on bottom. when I worked at Fiserv all my acls worked normal. is that…
-
ipv6 noob question
Hey everyone I read many things about IPV6 but I don't get what / notation and number after it means i mean like this: 2000::/3 FE80::/10 can you tell me what it's mean ?
-
OSPF Multicast Address
224.0.0.5 is the All OSPF Routers Address (in that case does it mean the DR and DROTHER routers)? 224.0.0.6 - DR address is used to send routing info to DR routers on a network segment In that case, does the "job scope" of 224.0.0.5 and 224.0.0.6 overlap since they both talk to the DR routers. Can someone give a flowchart…
-
VPN connectivity help?
Hi I have recently finished creating a VPN site to site network but it doesn't seem to be working correctly. Everything that I've done seems to be in order but obviously something must be wrong but I'm not sure what though. Basically i have 2 site networks, 1 with 3 machines on a 10.30.0.0/24 network connected to a…
-
Progress Tracker
Hello all, I saw Iris post a CCIE progress tracker earlier this week from her friends at routergods and was just curious if any of the guys/gals out there happened to have one for CCNP? It looked like a great idea. I figured I would ask before I started to create one myself. I'm not able to study as much at one time as I…
-
VPN connectivity help??
Hi I have recently finished creating a VPN site to site network but it doesn't seem to be working correctly. Everything that I've done seems to be in order but obviously something must be wrong but I'm not sure what though. Basically i have 2 site networks, 1 with 3 machines on a 10.30.0.0/24 network connected to a…
-
Native_vlan_mismatch
hello guys, what if you cannot control the other end and the vlan that is mismatched then what? I dont want this chatter in my logging files. how to remove without affecting my traffic flow? Do you guys know?
-
Boson CCNP exams
Hi All I've been working hard on my CCNP the last 3 months. I wanted to know if it was worth investing in the Boson CCNP exams, they're on sale right now and wanted to know who else has used them. I'm thinking of getting all 3 but wanted to make sure they actually stand up to the material. Thanks!
-
ASA for learning and (eventual) use for certification lab.
So, we have an ASA at work and as the main network person I get the task of deciphering its current configuration and eventual modifications and troubleshooting. Everyone is new and as far as I know the device had its current configuration applied elsewhere and shipped here so I'm pretty much on my own. I'm not complaining…
-
CCNP - Route: Failed
Hi Guys, Its been a little while. I hope all is well. I failed the CCNP Route exam last Friday. I did fine on the labs and sims. It was the non routing protocol trivia questions that I did badly with. Anyways. Its good to be back on the board. BTW I got a 662. Have a great day, Node Man