-
CCNP and CCIP
I will be great gratitude , if someone guide me ,is it possible that i can appear for CCIP exam?but i dont want to appear for CCNP exam.
-
Voice and Security
I don't know much (anything) about voice, and I was curious how much voice and security are intertwined. Essentially, would a CCSP be complimentary to a CCVP?
-
How to upgrade a 3550/3560 SMI to 3550/3560 EMI ????
Dear List, i got 1 x 3550 SMI and 1 x 3560 SMI in hand for lab use, and are planning to upgrade them into a EMI version for self study use. my question is as follwoing. 1. is the following IOS are a EMI IOS ? c3550-ipservicesk9-mz.122-25.SEC2.bin c3560-advipservicesk9-mz.122-25.SEE2.bin 2. if i install the above IOS into…
-
Problem with a BSCI lab
I'm doing a BSCI Lab. I configured P1R1, P1R2, P1R3 and P1R4 as OSPF and P2R1, P2R2, P2R3 and P2R4 as EIGRP. Now I can't make P1R1, P1R2, P1R3, P2R1, P2R2, BBR2 and BBR1 communicate through the frame. I'm using GNS3 emulator. I got this lab from a friend of my and he also gave me the initial configuration, but he didn't…
-
EIGRP Successor/Feasible Successor
I am stuck on some of the feasible successor/Successor stuff in EIGRP. I understand that the Advertised Distance (AD) is ALWAYS < than the Feasble Distance (FD). I understand that the FD is the overall distance from the originating router to the destination network. - By this I mean the neighbors AD + the cost from the…
-
Passed ONT today...
Passed with a 855 this time. I tried to go slower this time around but still ended 38min early. There were a few areas I did worse the second time around, but I did a lot better overall. Here are my scores to compare. The first time will be on the left. Desc. VoIP 76 92 Desc. QoS considerations 61 100 Desc DiffServ QoS…
-
Cisco Unified Personal Communicator - Line Presence
Outside of just the green (available), yellow (idle), red (away) indicators in the CUPC program, can you somehow get a presence status on the line to display via the CUPC program? Sort of like what you can do with the speed dials. For Example - If someone picks up the phone to make a call, the status changes to "off-hook"…
-
LAB FOR ONT - Any suggestions for the wireless part?
Hi any recent passers or peeps that are "in the know"... I just got done with my Nuggets vids, and reading the Cisco press book, and by following my usual method, I do "labs". I also watch Trainsignal vids. But when I look at the wireless lab that is presented here by Cisco:…
-
Creating a new class-map under a policy map
Alright, this is one thing I have not been able to figure out. This is a direct quote from the Net Acad material. The syntax is listed as: router(config-pmap)#class class-name condition I have tried: class test class test match-all match protocol ftp class test match protocol ftp class test condition And I have tried it on…
-
Failed BCSI [Edit Passed]
Crushed it this time. Its amazing how much your score goes up if you finish all the questions in time :D
-
ip helper-address for vpn?
In my home network I have quite a few subnets, as I'm sure most of you do too. Every once and a while I have some friends come over and plug their laptops into the network to play some older multiplayer games. As they are in a different subnet than my computer I use the "ip helper-address" command to send the broadcasts…
-
Router Diagnostics
Hey Guys, Is there a built-in diagnostics in every cisco router? Say i want to check that all components are functioning properly. Currently i have pair of cisco 7507 and want to diagnose. What tools do you use? I appreciate your comments. Thank you,
-
Question - What do you use for a "test environment"
I'm working on a project for work and thought you guys might be a good resource. I'm trying to come up with some guidelines for adding new network devices to the network as well as some ideas for a "test environment" that we might use for testing hardware before we put it into production. Since I'm rather new to this side…
-
Bi-Daily Question 6-3
What are the fundamental differences between PCM and CELP??? And what codec's use either of them??
-
Cisco firewall device
I am trying to get a break in the IT industry as a an entry level network engineer. The skill set most employers seek includes routing, switching as well as VPN and firewall experience. I’ve been working on routers and switches for a while now but have not quite broken into the dedicated firewall boxes. Can anybody…
-
Classful routing protocol behavior
Hi, Trying to dig a bit deeper into classful routing routing protocol behavior, and read this snippet in BSCI self-study: "A router sends the entire subnet address when an update packet involves a subnet of the same classful network as the IP address of the transmitting interface. The Receiving router then assumes that the…
-
Passed BCMSN today
Im having a good day :D BCSI exam commencing Everyone enjoy the 4th weekend. I know I will now
-
Wendell Odom - Is CCVP Worth 500 Hours to You
Stumbled upon this thread in Wendells blog. Thought you could be interested too. http://www.networkworld.com/community/node/23227 Today, I'm going to pull some thoughts together regarding my main topic for the past 2 weeks - the time and effort involved in getting your CCVP cert - and then ask you to tell me if it's worth…
-
Cisco MARS Event - Windows ASN.1 Bit String NTLMv2
I am getting an event type called "Windows ASN.1 Bit String NTLMv2 Integer Overflow" on my Cisco MARS server. I am not sure what it means even though the definition is given below: This signature detects malformed ASN.1 data during Windows NTLMv2 authentication that may indicate an attempt to exploit an ASN.1 bit string…
-
ASA Content filtering
I may be over my head with this ASA, but I'm looking for some advice. Backstory: Third quarter last year the network admin at my place of business decided he wanted more security for a certain department and wanted to place them on a separate network. Rather than doing the fast and free plan of creating a separate VLAN and…
-
EIGRP Hold-Time Issues
I have a router that keeps losing routes due to hold-time expiring. Although I'm not yet sure why the hold-time is expiring, I would like to keep functionality up by increasing the hold-time. (So it doesn't lose all of its routes). On the tunnel interface, where it learns routes, I did: ip hold-time eigrp 23 60 (changing…
-
Multicasting
How can you tell whether packets are coming in via SPT or RP by observing multicast routing table. It creates entries for both S,G and *,G. The lab manual says that you can tell by looking at flags but doesn’t explain what each flag stands for.
-
Redistribution
Is there a difference or reason why you would distribute with a prefix list opposed to a normal route-map pointing to an access-list?
-
Onto ISCW! :)
Hey all, Just got back from sitting BSCI - Passed with a 925 :D Although I really need to work on my time management during exams.... This is the second time I've had less then 10 mins to complete the last 10-12 questions..... Got through it but have a feeling I might have lost alot of points due to rushing through the…
-
Frame-relay and inverse-arp
Hi, I am using a pretty basic frame-relay configuration on Dynamips. 2 routers through a Frame-relay switch. I was playing around with the inverse-arp settings, but cant quite understand the scenarios im getting. I am disabling inverse-arp on the Router1's serial interface (no frame-relay inverse-arp), but for some reason…
-
Good MPLS writeups by Cisco and Juniper
http://www.juniper.net/techpubs/software/erx/junose72/swconfig-bgp-mpls/html/mpls-config5.html This is a great "no bull" blueprint for how MPLS works. I'm using it for a great refresher. Here's The Cisco DocCD's references: http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/12_4/mp_12_4_book.html I'm attacking…
-
Good MPLS writeups by Cisco and Juniper
-
Bi-daily Question -- July 1 ( I know I am late)
I came across this while studying PCM and thought It would at least spark some interesting reading for at least one person. What is a Nibble????
-
642-642 Scheduled for noon [edit] passed, 988/1k
-
Ideal home lab for CCVP -->CCIE Voice
Can someone or everyone tell me in list form what equipment they used for their CCVP home lab? and give recommendation! Thanks
-
The creation of a data center from the ground up (blog)
I've been hawking over the Nexus 7000 product documentation and felt that my data center knowledge was a little lacking so I did some googling on data center infrastructure and came across this great blog that chronicles the construction of a data center from the ground up. I thought my friends here might like the read.…
-
CBT Nuggets, general opinion
What is the general opinion of CBT Nuggets training? For the Cisco CCSP stuff they are one of the few companies that seems to address the current versions of the tests and I was wondering what you guys thought of them.
-
BCMSN study guide first chapters
hey guys, got the study guide through yesterday and started reading, is it just me or is there a lot of 'sales talk' in the first chapters, kinda felt that Cisco where trying to sell me a 6500 switch. I was looking forward to getting into the exam objectives. Looking at the blueprint the exam objectives don't start till…
-
LATE Bi-daily Question
Sorry guys I have had some stuff to do at work.... But here you go... super simple How many servers can a 7960 be registered too??
-
cvoice -- :D
So i sat this exam yesterday and passed with 96%. I'm not sure how, as i couldnt get the lab working. But happy days non the less :D
-
Failed ONT. :(
Well, I now can say I've failed a certification exam, but I think I know what I need to do to pass the next go 'round AND Cisco is kind enough to offer a free second chance. Here's my thoughts on the exam, in case it helps anyone else (I can't get too specific because I don't want to violate NDA)... 1. The exam guide is…
-
**Free SNPA book**
Welcome SNPA exam candidate! It's your lucky day! I forgot I purchased this book, and I lost (intentionally threw away) my receipt. Now, B&N won't exchange it because it's out of print, so I'm stuck with an SNPA book that I won't be able to use before the exam retires. I'd rather sink a few more dollars into shipping it…
-
Pix Firewall Simulator
Hi guys i was wondering if there's any simulator available for the Cisco Pix Firewall ... I need a pix simulator just like the cisco router simulator from Boson , that allows me to create random networks and configure their routers/switches (in this case to allow me to conigure the pix)
-
Cisco lab - fractional T1 interfaces
Hi all, I know this is not directly certification related but I have a burning question about hooking up Cisco fractional T1 interfaces back to back: In my home BSCI lab, I'm trying to create an OSPF stub area by hooking up two Cisco 2611 routers both using fractional T1 CSU/DSU interfaces with a T1 x-over cable. All the…
-
VWIC-1MFT-T1
Has anyone purchased these from China and do they work? I'm trying to finish up my CCIE voice lab and I need about 3 of these cards. 70.00 + 30.00 shipping from China...beats my 70% off discount.
-
Good info on mixed lab
Hi, Ive read a couple of posts that its possible to link your real-router/switch lab to a virtual one in Dynamips. Are there any good starter tutorial on how to do this, and generally using Dynamips for good labs? I am using GNS3 at the moment. I dont mind setting up an extra box just for Dynamips, just need some…
-
TCL scripting and EEM
I'm in a bit of a pickle here with trying to configure failover at a remote site. This network has 2 points of entry. One entry point at the edge is a T1 with EIGRP running across it. The other point of entry is at the core with an MPLS link and BGP running. So if the T1 goes down at the edge then I need the edge router to…
-
Passed BSCI today
Passed with 822 EIGRP 88% OSPF 90% ISIS 85% features 50% BGP 72% Multicast 75% IPv6 62% Needless to say I found this exam really hard, you may have seen posted failed attempts. I am so happy I can move on to the BCMSN. It's been a tough ride. Thanks to you guys on here for motivation, don't know what I'd do with out ya :D…
-
New CCSP adventure
Good morning fellow members, As im about to embark down the CCSP track im in a state of panic due to the newly discovered change in the CCSP track. I shall be starting with the CCNA:S anyone have any idea or advice for a troughtly confused member on how to structure my goal as in what new exams will the new CCSP track…
-
642-523 SNPA - What firewall?
Hi everyone! I recently completed my CCNA, and I've just started on my SND! I want to pick up a firewall in preparation for the SNPA and to help with the PIX chapters of the SND. But which one should I get? PIX 501? Cheap and cheerful. No support for version 7. PIX 515? Expensive, but versatile. Version 7 supported! ASA…
-
New CCSP
Ok, I'll start it the conversation. 1. Are the specialist certs going away? 2. It says we'll need the pre-req (CCNA+CCNASecurity or CCNA+SND) and 3 core + 1 elective. I see the electives are CANAC and MARS. That means the core is SNRS, IPS, and..... ? ASA Foundation? Can anyone confirm? or is ASA Foundation and ASA…
-
DHCP Assignment based on Mac address
How would I go about configuring a Mapping so that when a specified interface sent a DHCP discover to a sever (cisco router) it would get the IP address defined by the mapping?
-
Catalyst 2950 and ACLs
Hi, I was reading up on some ACL stuff, and came across this info from Cisco, regarding ACLs, and I cant quite get my head around it: "In an IP extended ACL (both named and numbered), a Layer 4 system-defined mask cannot precede a Layer 3 user-defined mask. For example, a Layer 4 system-defined mask such as permit tcp any…
-
Lan-to-Lan VPN between ASA5505 and 3000Concentrator - 1%LOSS
I've got a L2L vpn tunnel set up. When doing a constant ping to the internet (4.2.2.1) there is 0% packet loss, and great times. When I do a constant ping to any host on the other side of the tunnel, it's getting a steady 1% loss. ROUTER(config)# ping inside 192.168.4.200 repeat 1000 Type escape sequence to abort. Sending…
-
ONT on Monday at 2pm...
Well, I just scheduled it. I have to say I am rather nervous about this one as well. I just recently passed the BCMSN which seemed rather easy and gave me a big head. So I read through the Net Acad material for this one in 3 days of nothing but reading. This is also the only NP level test I have not taken a class on. I…
-
Question about cRTP
I know how it is turned on and what it is, but I was wondering how you specify whether or not the CRC is included or if you can even do that since I have never seen it mentioned in online curriculum. Only says it is either 4bytes with and 2 without. Nevermind, found it. CRC is not kept by default... But if for some odd…
-
Deploying callmanager for a company.
I do know how to configure callmanager 4.1 but after installing ccm 6.0 on vmware. It has got me thinking. If you were to deploy a callmanager for a company, which one will you deploy? 4.x or the 6.0 since the 6.0 is clearly the "future" because you don't want to deploy 4.x version and have to come in 3 years later to…
-
CCNP Self study
Hi everyone, As im about to embark on the CCNP wagon ( CCNA exam next month hehe) I was wondering if self study is a good idea ( I do work in the largest NOC in my country) and I was planning to use the cisco press official exam cert guides, GNS3 + dynamips, cisco press practical studies. I was planing to start with the…
-
Venturing into the world of CCNP
Hey everyone, As of today, I have begun preparing for the 1st of 4 exams, BSCI I have 3 books so far: CCNP BSCI Official Exam Certification, 4th edition CCNP Building Scalable Internetworks Lab portfolio CCNP Authorized Self-Study guide I have started reading the self-study guide and will be using it in conjuction with the…
-
Suggestions for going through CCNP
Hi, I have read all the FAQ's and peoples experiences regarding starting out on the CCNP track. I especially need advice on what study material i need to purchase, there are soo many books and material, some old, some new, whats the latest on the book list side? Also, if you have any suggestions regarding physical gear, I…
-
Question about 6.0
I'm pretty comfortable with callmanager 4.X So I decided to play around with 6.0 on my vmware server. I want to add an Ip communicator and for some reason it is not registering. When I go to the CCMadmin page it doesn't give me a place to add the mac address for the IP communicator like CCM ver 4. it only asks for device…
-
CCVP Help!
Hi There, I'm currently working the telephony sector and am study towards my CCVP cert, first exam Cvoice. I want some idea of how people balanced work - study while doing the CCVP? How long have people studied on average per exam (in day or weeks)? how much time they would allocate to study per day or per week? When it…
-
Registering NOKIA E61 SIP client with CUCM 6.0
Hallo, I am trying to register Nokia E61 with cisco Call manger 6.0 using integrated SIP client on Nokia Telephone. I have not yet succeeded it. I have Under Call Manager created the following 1. Created Phone as Third SIP device with the MAC address of WLAN card of E61 2. Created end user with the user id 1005 and the…
-
Certification Timeline, resetting the clock
I was looking around this morning, having a difficult time finding a definitive answer, I'm sure its out there... Do I have to complete all four CCNP exams within 3 years of my CCNA or does the clock reset with each passed NP level exam?
-
EtherChannel Question w/ Server
I've been reading about EtherChannel and in the text I came across something that was interesting. The general idea was that you could setup etherchannel to a server and have the link decision based on IP, port, etc. This got me thinking. I have an IBM eServer sitting next to me as a file server for my home office, plus it…
-
Scheduled ONT for next tuesday afternoon...gulp!
I scheduled my ONT exam for next tuesday in the afternoon. I'm nervous because 1. It's my first CCNP exam and 2. I'm always nervous for exams, even when I'm super-prepared. What I have done so far to prepare: Read through the Cisco Exam Guide for ONT Created a study guide from notes Made flash cards for the things I have…
-
Passed CIPT 4.x
This time I was more focused on the CBT Jeremy's video and once in a while looked up something in the book if I was confused. I must say he's the best so far! Now I start to pray this summer NOT full of storms. All lab equipments are in the basement. Last weekend we were cut off power for a whole Sunday. I had to clean the…
-
ONT Today!!!
I got my ONT at 2:30 today Hopefully I can come back and say I am a CCNP, will update later.
-
BSCI exam scoring
IS negative grading part of the BSCI, I remember they used to do a negative scoring back when I first took my CCNA. What about questions with multiple answers, if you’ve selected one right and one wrong, do you get points at all?
-
Security+ and ISCW Concurrently?
Yes, I know, I haven't taken my first CCNP exam yet and I'm already thinking about the next!! Since I have more day-to-day work on ASA's than anything else, I'm thinking of doing ISCW next. I also have a CompTIA voucher I'd like to use up, so I was considering this for a plan... Study for Security+ while I work on ISCW.…
-
Arp and Proxy Arp Understandings(Who can solve ??)
Hi Guyz, I have a simplest network ie 2 PC are connected with a router, here I used R1 as PC1 and R2 as PC2.I simply used GNS3 so no real routers. Now we want to ping from PC1 to PC2 and we have to answers 6 questions regarding ARP and Proxy Arp understanding. PC1 <> Router <>PC2 R1 (f0/0) <10.1.1.0/24>(f0/0) R0 (f1/0)…
-
interspersing CCNP with non-CCNP exams ??
Hi guys I need a little bit of advice in formulating my plan of attack on my much feared adversary (CCNP) ok now, seroiusly , My CCNA is about to expire in a few months and i really need to get at least 1 CCNP exam (probably BSCI) out of they way before then. I have been told that the CCNP exams now incorporate a ton of…
-
2511 Access Server Problem...Fixed
Hi, I just got all my lab gear but setting up the 2511 is killing me for some reason. I've never set one up before. I've googled it to death and I still can't figure it out. Whenever I try to connect to device I get: Trying R1 (172.16.1.10, 2001)... % Connection refused by remote host Here is my config, what am I doing…
-
Running CCM
Can CCM 4.x be run on VMWare on an external HD on one's home PC? I was told it could, but I wanted to check. Can't afford a server proper. Thanks.
-
CCSP without CCNA
Hi, I am new to the Cisco certification ladder. Want to write the CCSP(SND) exams soon. In as much as I know its advisable to start from CCNA, I want to know if it is mandatory.
-
Inter_vlan Problem
I am not able to attach the Topology Diagram of the Network. Actually this setup is for inter-vlan routing. And technique I am using is Router on Stick. The Gi0/0 interface of router is divided into two sub-interfaces Gi0/0.221 & Gi0/0.205. This Trunk port is connecting to port no. Fa0/1 of switch01 and is a Trunk Port.…
-
The techie career path
Hey Everybody, I love being a techie, but my boss suggest "Techie dont make much $$$ in the long run" He suggest Project management or MBA. What do you think? How do you feel when the new CIO or CTO doesn't even have a background in technology. Thanks for input,buddies!
-
Confusing config
Need your help understanding this config, my fellow techies. This is on one of our core routers (Cat 4500), and I just don't get it. Check out this port-channel config: interface Port-channel4 description *** Server Farm #4 (ThinClient) *** switchport switchport access vlan 1200 switchport trunk encapsulation dot1q…
-
subnet mask behaviour
This is probably a CCNA related question, but I came across this issue when troubleshooting a mismatched subnet mask at work this week. example: default-gateway: 192.168.1.1 255.255.255.0 (vlan 100) my pc: 192.168.1.104 255.255.255.192 (vlan 100, based on cat4506 port config) This was a manual configuration for testing…
-
Dial Peer Configuration
Hi Guys, I am going through the config on a gateway that was configured by a 3rd party and have noticed a few things that are done differently to what Ive seen previously. Looking at the dial-peers below can somebody explain to me why no port needs to be referenced at the end? Normally I would expect to see something like…
-
Bi-Daily Question 6-16-2008
Ok here is an easy one... What are the major differences between CCM 4.X and CCM 6.X with retrospect to there Database's?
-
Failed BCMSN :(
I don't believe it. I failed BCMSN with a 742. I took the academy training and passed with an A at the local college. And then studied and studied for a solid two days prior to writing the exam. WOW is there ever a lot of questions on Wireless. (I won't get into details.....rules ) That it is just crazy to the depth you…
-
Cisco 2600 to ASA 5500 VPN Question (xpost from off-topic)
Hi Everyone, I have an odd request, and my very limited cisco knowledge is insufficient for the task at hand. We are trying to install a cable internet connection at a remote location as a fail-over for the point-to-point T1 connection. However, we still need all traffic to flow from the remote location to the main office.…
-
IPS
So I discovered that we have a 3745 with 256 RAM and 64 Flash that we're not using for anything, I figured I would crank up IPS on it. I'm trying to find the biggest-and-baddest signature file on Cisco, but a lot of pages just link me to 404. My goals - Learn a little IPS for real life - Learn a little IPS for the exam -…
-
Passed 642-522 Today
I passed the 642-522 exam today Asa & Pix after studying for 2 months now on and off
-
Pix Packet Tracer Question
When you run a packet trace, can you put any random source port above 1024 like TCP would normally pick?
-
BSCI Lab Portfolio, pg 299
There is a challenge on this page that is making me scratch my head. I have researched it and believe I know the answer, but wouldn't mind some clarification, if at all possible. The question states the following: "On R1, configure a distribute list to filter 192.168.20.0/24 and 192.168.25.0/27 from inbound updates on R2.…
-
Just Got Back from Honeymoon Vacation
Hello All, Just came back from honeymoon. And Again I started my lab and everything, planning to take ONT exam on Sept. Anyway I need small help I am building a small ATM lab. I'm new to ATM, here's my question? I have ATM sw1 172.16.1.1ATM sw2 172.16.1.2 ok I got success ping... on both direction. Now I configure routing…
-
CCNP or CCVP ?
Hi All, I'd like to hear from CCVPs. I enjoyed studying CCNA and passed the exam. I don't know i should continue to study switch and router or study voice. The reason i thought of CCVP was that there seemed to be lots of job opportunities out there. Is CCVP quite different from CCNP? Is it fun to study and work? Any advice…
-
How to check whether port is open or not
How we can check these ports 381, 382,161,162 are opend in network or not ?
-
Outbound IVR system
So I just got put in charge of building an Outbound IPCC System..SWEET.. I have build small inbound one's before but never an outbound one... Not really sure where to go?? I need to read on all the SRND's for IPCC so that I can figure out how exactly I am going to build it... Any one have any comments on building at…
-
Bi-Daily Question 6-14-2008
How many and exactly what codec's use VAD??
-
EIGRP bandwidth percent
By default EIGRP uses 50% of the bandwidth reported by the IOS software, but what if there’s no bandwidth set on a serial link and it defaults to 1.5m with clock rate set to 64000, how much bandwidth would EIGRP traffic use?
-
does this eigrp topology out look right to you
Does this look right to you guys, am I going crazy or is the FD meant to be the same as the value in the first bracket R2central#show ip eigrp topology IP-EIGRP Topology Table for AS(1)/ID(2.2.2.2) Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply, r - reply Status, s - sia Status P 1.1.1.1/32, 1 successors,…
-
2 ISCW-related questions
I'm currently studying for the ISCW exam and have a couple questions that I haven't been able to find an answer to: 1. The Network Academy module on MPLS says "A received labeled packet is dropped if the label is not found in the LFIB table, even if the IP destination exists in the IP forwarding table, also called the FIB.…
-
Something NEW
So after the last thread about how this forum doesn't see as much activity as others... I figured I would try something... So I am going to try and post a new question every 48 hours... And see who answers correctly first... ( it would be nice if we could figure out how to do a point system...Just a thought)... But don't…
-
Studying BGP
I might be missing something, but it seems to me that BGP is more or less glorified static routing. Did anyone else feel this way when they first started learning it?
-
what more do I need?
After reading all the information on line it has actually made my head spin. I'm looking to add to my lab for CCNP studies. I used 3 2610's and 2 2924xl and I got through CCNA perfectly. Now for the NP, I'm thinking about getting 2 2950''s and 2 or 3 possible 3640's or 2611xm. I don't plan on using this gear after CCNP its…
-
Home Lab Setup
Hello I am new to CCVP and in the process of trying to setup a home lab. I have installed call manager 6 on VMWARE and DHCP on windows 2003 server. I have one 1760 V router with 2 FXS , FXO ports and two Ethernet ports, one 3640 Router with no PVDM and two 3550 switches. I have two VLANS 101 and 201 one on each switch. My…
-
CISSP VS. CCSP
I will ask this question in the cissp forum also. Which is more useful to get. I work with the DOD, and they use primarly CISCO equiptment, and i personally feel the CCSP is easier being that i work in that enviornment, but it will give me a warm and fuzzy having the CISSP. I need guidance. Im lookin at a 3 month 4+ hour…
-
failed BSCI today
failed today with 744 so not way off but still no cigar non of the subjects were that bad but there was alot of questions on DHCP which I didn't expect only got 40% on features. I was a bit mad they didn't test me on route-map and hardly any distribute-lists questions as i'd worked a lot on them leading up to the exam I'll…
-
Unitek ccvp bootcamp
any one attended ccvp bootcamp from unitek? can you share your experience? thx
-
Scheduled BSCI
Countdown is on! I scheduled my first exam for the CCNP on June 24th. I feel pretty strong on all the IGPs now, but have some work to do with BGP and multicasting. I will be labbing these guys up and reading from more sources over the next couple of weeks. You will probably also see many posts from me on these two topics…
-
CCNP Composite 642-892 Ahead
Hello Everyone!! Well I was going through this website and was amazed about the CCNP Talks all around. Anyways I've taken my CCNA exam last January and it was a practise for me and never found it challenging. Now I am almost done with all the topics of BSCI and BCMSN and would want to see myself against CISCO. :) Now the…
-
Im New...
I jus joined today as you can see, I want to earn my CCSP, Im jus confused on which test to start with. Like which of the 5 to start with. Any help will and I would name my 10th child after you.