-
help with NAT terminology
I understand how NAT works and the 3 types (static, dynamic and overload) but am confused at the terminology. Does anyone have a source (no pun intended) that would explain this in a way I can understand and remember it? Term Definitions Cisco defines these terms as:* Inside local address—The IP address assigned to a host…
-
Has much changed?
Time to renew my CCNA's. I am debating taking a CCNP: S exam, but since I passed the GCIH and CISSP this year, I may just want to take it easy and take the CCNA: S again to renew that and my R&S. When I took this 3 years ago, it was mostly multiple choice with some CSM config. Since CSM has pretty much gone away, is there…
-
ICND1 100-105 Passed Today, about my study method
Hey All, I just took my ICND1 test today and I can report that I passed, 860/832. I actually thought I did much better, but nevertheless, a pass is a pass. My test breakdown is below. Network Fundamentals - 83 % LAN Switching Fundamentals - 75 % Routing Fundamentals - 87% Infrastructure Services - 78% Infrastructure…
-
Have you ever thought too hard at made it more difficult than it is...please help
I know I'm thinking to deep into this but I need clarification Ex. ROAS with 2 Vlans. Vlan 2 is part of x.x.0.0 /24 and Vlan 3 part of x.x.1.0/24. I want to verify that sub int for x.x.0.0 will have an IP address in x.x.0.0 as well as Vlan 3 having an ip address in x.x.1.0. I got that part but the physical port/trunk will…
-
ICND2 Failed BLAH
Failed 731 out of 811. LAN Switching Tech. - 63% Routing Tech - 53% WAN Tech - 80% Infra. Services - 63% Infra. Maint - 56% I felt very confident. Been studying since May every single day. Labbing non-stop. The exam didn't seem hard, but I know I need to really dig deep into PPP/CHAP Auth. The labs seemed pretty easy, I…
-
Divide an ip into ranges of variable size
I'm doing a practice with packet tracer, in which I get the IP 192.168.10.0 / 24 and they ask me 3 VLANs 10, 20 and 30; With 50, 120, 200 hosts respectively. My questions are: * Do I need to change the IP address range for the IP range, or how do I find the range of IPs I need to assign to each VLAN? * Is it necessary to…
-
CCENT - which book
Can someone please link me the latest Odom and Lammle's books for CCENT - amazon or something similar to buy from? I'm going to give this all another go. Which book do most of you prefer and why? I am sure my books from a few years ago are now well out of date as IP6 is now covered in the CCNA.
-
CCNA Cyber OPS self study
HI guys I am looking for a next CERT to pursue and I am considering CISCO CCNA Cyber Ops (https://learningnetworkstore.cisco.com/ccna-cyber-ops) However I am short on funds and I never took any CISCO certification exam. So I am not sure if it will be possible to pass this exam just with these two companion books:*…
-
Novodyne 210-260 Video Series
For anyone looking for 210-260 videos, I found this video series: https://www.ndtrainings.com/training/security/videos/ccna/ It's the same guy who used to teach the CCNP security courses for IPEXPERT before they collapsed (Piotr Kałużny,). The current cost of the videos is $119 and the total runtime is 17 hours long. Not…
-
load balancing
Could you'll tell me what is load balancing? Didnt understand what it is.
-
Ready for taking the exam?
Hello everyone! I'm in the finals in preparing myself taking the CCENT / ICND1 100-105 exam. I've read the whole Official Cert Quide by W. Odom, and actually i'm passing through all key topics in the book again, by recalling all details of the topics stated there. Beside i'm doing practice exams (Pearson IT Certification…
-
I want CCNA complex practice lab.
Can you tell me where can I practice each topic deeply?
-
Ccna - network administrator
Hey guys, I'm sort of lost here, hoping i could receive some pointers. I just finished my Network Administration Certificate from a local college here in MI. While in the Network Administration program i did basic routers and switches configuration (setup ip address for the ports, move them into vlans, trunking etc.) I…
-
Root Directoriy
If I run out of root directories trying to install ip phone firmware onto a route how can I create more space?
-
Whats better to get?
My lab currently has 3 2811 routers and 3 3750 switches. I dont like moving the console cable from devise to devise. To control them all from 1 PC I can get a 2509/2511 terminal server, or I can put together a PC that has 2 serial port add in cards. Each card has 4 serial ports for a total of 8 serial ports. The cost would…
-
Cyber Ops
Hello! Are the 210-250 and 21-255 books enough tp pass both exams? Thank you!
-
For Sale: ICND1 and ICND2 books
I bought these books brand new at Cisco Live! several years ago but did not even read them. I am no longer pursuing any Cisco certs so I am selling these two books for $25 total (shipping is included). (List price is $39.99 per book.) E-mail me at bj.peter.delacruz@gmail.com if you are interested. I only take PayPal.…
-
Ready to take the exam?
Hello everyone! I'm in the finals in preparing myself taking the CCENT / ICND1 100-105 exam. I've read the whole Official Cert Quide by W. Odom, and actually i'm passing through all key topics in the book again, by recalling all details of the topics stated there. Beside i'm doing practice exams (Pearson IT Certification…
-
Packet Tracer Topology Issue....
Hey guys I am currently studying for CCNA R&S, and came to this point through the book I am working through where I don't understand how to replicate the topology in the books example. I am attaching a screenshot. To this point in the book (14 chapters in), none of the labs have had this 'branch off' type topology before,…
-
insalling ios
How do you install ios to do the commands in the book. Thanks.
-
RADIUS Setup
How accurate is the below config for setting up RADIUS: Router(config)#aaa new-model Router(config)#username ### password ### Router(config)#radius-server [name] Router(config-radius-server)#address ipv4 [IP] Router(config-radius-server)#key [key] Router(config)aaa group server radius [group name]…
-
Wildcards - Range and Even/Odds
Subnet Mask | Wildcard | Range (My guess?) 255 - 1111 1111 | 0 0000 0000 | 1 Address 256 times (really 255 - 256 means you move across the dot 0.0->.0.0) 254 - 1111 1110 | 1 0000 0001 | 1-2 128x subnets = 256 252 - 1111 1100 | 3 0000 0011 | 1-4 64x '' =256 248 - 1111 1000 | 7 0000 0111 | 1-8 32x '' =256 240 - 1111 0000 |…
-
ccna lab
Are there any books for ccna lab?
-
Can't ping interface
I'm getting started with my home lab setup, and already am running into snags. I have a workstation with 10.0.0.10/24 assigned. It is connected to fa0/0 on a 2960 router with 10.0.0.1/24. On Fa0/1 I have 172.16.0.1/30. Both interfaces are up/up. From the workstation, I can ping 10.0.0.1, but not 172.16.0.1. What is wrong?
-
How to telnet directly In privileged mode
Whenever I ssh into my organisation router, it goes into > mode instead of #mode. Therefore, the password has to be entered again. What is the command to allow ALL users to enter # mode when someone ssh in remotely?
-
how to use ios command line simulator
I downloaded ios command line simulator and opened it with Winzip which put it into separate folders but how do I get the command line interface? I'm not getting the command line interface. How?
-
same? show start / show config
hi all, are show start and show config commands 100% the same? or are there some minor differences? Thanks all.
-
CISCO PCKT Networking
Hey, I need help! Urgent! ): There seems to be a problem when i tried to ping a computer from another. Currently in my topology, I connected two routers together, one switch to one router, and one PC to one switch. The ip addresses are all okay, none of them overlaps however, I don't understand why I cannot ping the other…
-
Recommended?
Hello all, im new here. Ive been researching what i can on acquiring a CCENT. Ive been a bit tossed between a CCENT or CCNA. I don't have any experience. But i have always been fascinated with Networking and I know what i would be getting myself into. I understand ill have to more than likely start at a help desk which is…
-
Passed R&S 125
Test was hella tough. But it's oh-so satisfying one you see the congratulations screen when your done sweating from 60+ questions Materials used: Lammle's books ( both ICND1 and ICND2) Anthony's Exam cram ( 200-125 ) and the latest videos from CBT nuggets. I honestly think the exam cram helped me the most, BUT Lammle's…
-
Houston area testing center experiences and non-student access to school centers?
I plan to take my ICND1 at the end of the month and would like to see if anyone has any positives/negatives about the testing centers in Houston. Many are at Community Colleges and IT Academies which leads me to my 2nd question.... do you have to be enrolled as a student at that college/academy to do your testing there?…
-
Common troubleshooting common problem via Show Interfaces ?/?
I've been looking for this in multipule books but they are all over the place. Can someone post some common network problem that can be integrated by running a sho int command Like broadcast storms via - ignored and no buffer I know there are a lot more than that.
-
Passed Round 2 netriders Peparing for 3
Hello Guys! i'm a CCNA student i just finished CCNA and passed round 1 and 2 in netriders CCNA, and ranked #1 in IT essentials!, anyway! i'm very excited for round 3 but i cannot find any study materials! can you help me! i wanna rank #1 in CCNA too so i can go visit cisco! any hints, template or w.e would be appreciated!
-
Connect a 4404 to a 3350 switch
All, Never worked with wireless other thank my Netgear before and I find myself helping a friend today on her CCNA wireless. I am setting up a Cisco 4402 WLC to connect to a Cisco 3550 switch here in a lab. When I directly connect my laptop I get physically connectivity fine. But when I attempt to plug into a switch I get…
-
Is it possible to detect non cisco devices connected as neighbors
For cisco devices, I can detect them using sh cdp neighbor. For non cisco devices, is there any other method other than checking the interface description?:D
-
How To Capture Logs Properly
This seems like a stupid question but I have to ask it because it is most of the time done by vendors. Part 1 How To Capture Logs Properly Using Putty? 1. What option do you select under the logging session? 2. How do you check whether the show run is properly and completely captured? 3. In the event that a disaster…
-
How to cnnect one port to multiple devices?
I'm studying from Lammle book on routing and switching. The setup in the picture is in the book. how can I connect one port of a device to more than one device (as in the figure), and how can I connect two hosts to the same port on a switch or router? I don't know what simulator the book is using, but I'm using Cisco…
-
Could you tell me this
I have a doubt in CCNA. What is F0/1?
-
CCDP 300-320 - Advantages of route summarization to a client?
Hi all. Someone can help me, I'm not sure what the answer to this question is. Which two elements comprise the backbone are while designing a new network utilizing IS-IS as the interior gateway protocol (choose two) A. contiguos chain of Level 2 capable routers B. contiguos chain of Level1/Level 2 capable Routers C. set of…
-
IPv6 SLAAC on Switch virtual intreface
Hi guys, (sorry for the mispelling, english is not my native language, i'm french) I can't assign an ipv6 address using SLAAC on my 3550 switches. SW1(config-if)#ipv6 address ? WORD General prefix name X:X:X:X::X IPv6 link-local address X:X:X:X::X/<0-128> IPv6 prefix autoconfig Obtain address using autoconfiguration…
-
CCENT / CCNA Exams Extra Time for non native english speaking exam takers?
Hi everyone! Just wondering if there is granted some extra time on the Cisco exams for non native english speaking test takers. On CompTIA exams there is an extra 30 minutes time period foreseen for such people (lilke me...) . But scoring well on test exams even without extra time, so im confident....does anybody know…
-
error correction and detection and technology
hey guys, please I wanna know why a certain error correction or detection is used with a certain technology or protocol, for example in TCP it uses either FEC or ARQ but why not CRC or check sum for example ? why UDP uses check sum not FEC ?
-
Lab not working: inter-VLAN routing with SVI
trying to do this lab with inter-VLAN routing with SVI, but I can't get it to work and can't figure out whats missing. PC 1 and 2 are in VLAN 10 (10.10.10.1/24) PC 3 and 4 are in VLAN 20 (10.20.20.1/24) I've configured L3 switch in both Packet Tracer and GNS3 with these commands: ip routing int vlan 10 ip address…
-
Consoling in to a router
I just got an Cisco 1841 router to use for practicing configuration to study for CCENT ICND1. I have downloaded Putty and have a console cable with a usb end and have updated the driver on my laptop to recognize the usb port. I can't figure out how to use putty or if I need to use putty to connect to this new (used)…
-
Traffic-export for IPS
Hey i am trying to learn about IDS/IPS on the network but i am having issues getting traffic exported to an IDS box. My test setup is a cisco 2800 router and a 2960 switch, i have multiple VMs connected to physical NICS that connect to the switch. They are all on VLAN65 and all connect fine and all is merry. I am trying to…
-
ICND2 Pass
871/1000 A little...underwhelmed! I thought I could have got in the 90s like last time but no, twas not to be. It was actually easier than I thought it would be, which is weird. I was so nailed down to the fine details that when I got some kind of genericy, high level 'easy' questions I almost couldn't see the woods for…
-
Study Methods for CCENT/CCNA
Hi all Just beginning on starting to study for the CCENT, I took both ICND1&2 classroom led courses earlier in my IT career a few years back now but never took the exam as my job at the time said not to bother as I didn't require the certificate ( I wish I'd ignored them). So now going down the self study route to get this…
-
ASAV in VMWare
Hi, I'm running asav962 in VMWare but it's not accepting my aaa new-model command. Is this just too old of a version? Also the does not work for me. Doesn't recognize the command at all. Am I doing something fundamentally wrong? Thx
-
ccna lab
How do I do VLANs in ccna lab? I didnt understand what he did. How do you get to the window where the commands are typed in ?
-
Free CCNA Training (Limited Time Offer!)
Hi there, I was following that training it was 70 USD but they made it free for a limited time. There are really good configuration examples. So hurry and enroll. https://www.udemy.com/packet-tracer-labs
-
Which WIC Modules to use for my home lab?
Just got my Lab kit for a great price on craigslist. Come complete with 3x 1841 Routers and 1x 3550 switch and 2x 2950 switch but the Routers come with WIC-2A/S should i swap them out for WIC-1DSU-T1-V2? and how many do i need? just one per router?
-
I can't ping between Routers in the same LAN....
So I have a packet tracer lab I'm working on and I can only ping between the routers on each side of my switches, not across. All four routers are on the same network. There are 4 switches setup in between the 4 routers. R1 can ping R2 vice versa, R3 can ping R4 vice versa. Here is the config for each router: R1#show int…
-
Distribute-list - OSPF/EIGRP
Hi guys, Can't really fathom this in layman's terms as I seem to be delving in to stuff that's beyond my comprehension. As I understand it for the exam it's really just a case of 'make sure no silly ACL is preventing neighbour relations'. But WHY would you want to apply an ACL on a routing protocol? If your network/passive…
-
GNS3 setup wizard, what to choose?
Hi all, trying to install GNS3 for the first time. When the setup wizard came up, I'm not sure what to choose because I don't understand the choices:* Run modern IOS (IOSv or IOU), ASA and appliances from non Cisco manufacturers. * Run only legacy IOS on my computer * Run everything on a remote server (advanced usage) I…
-
Ospf question
Using Designated Routers on Ethernet Links OSPF behaves differently on some types of interfaces, particularly comparing point-topoint and Ethernet links. In particular, on Ethernet links, OSPF elects one of the routers on the same subnet to act as the designated router (DR). The DR plays a key role in how the database…
-
CCNA: Spectacular Failure
Hey, Just came from exam center after failing spectacularly at my 200-125 exam. I scored 610. I need to regroup and start again. I am hoping to rebook exam date for 19th Sep.
-
Passed 210-250-SECFND
Hi Guys, I passed SECFND today with a score of 900. Pretty straightforward exam as others have said. Time wise I think they give you a lof time...60 minutes would be more than enough time seeing as you can't review questions or go back. I did all of this self-study, I am on the Cisco Global Scholarship program but my…
-
Coverage of topics for L1 , L2 and L3
Hi All, I am trying getting to know / brush up the skills on L1,L2 and L3. Query is what to cover ?. I am thinking below topics.. L2 : VLAN , STP ,RSTP , VTP ,ARP ,BOTTP and DHCP L3 : RIP,OSPF,BGP and IS-IS IP : IP Addressing , Subnettting , Supernetting , IPv4 and IPv6 No idea on L1 .. at all what to cover..? . I need…
-
how to connect routers and switches
Hi all, I'm studying for the CCENT exam at the moment, I've gone through the Chris Brant videos and taken notes. Going through Lammle's book at the moment. What I want to know is how do you connect actual router and switches together? what commands do you need? is there a lab book I can buy and use that will actually show…
-
ipv6 unicast-routing, not working
Hi all, I've trying to do an IPv6 lab for the first time, and when I enter R1(config)# ipv6 unicast-routing the router says invalid input, in fact, there's no ipv6 command at all. System image file is "flash:c2800nm-advsecurityk9-mz.151-4.M10.bin" is something wrong? Thanks
-
CCNA Best Network Simulator for preparing for CCENT / CCNA exam
Hi everyone! A question for those who used a Network Simulator for preparing for the CCENT / CCNA exams: I'm looking for a useful Network Simulator for doing Hands-on Training while preparing for my exams. I spotted two Simulators of my interest. One of them is the one from Cisco. The other one is the one from Boson. Both…
-
What does the Exam look like?
is there such a video that exists that will show what the exam format looks like , i.e the layout of the screen and how the sims appear on the screen , just so it doesn't come as a shock to me when i eventually sit the exam. i know there will be sims , and multiple choice type questions , i have sat microsoft and comptia…
-
Stratum Values
What's the difference between the stratum value in sh ntp associations vs sh ntp status? Cheers.
-
Pearson/VUE Cisco cancelation policy
Hello- It seems as if the policy for canceling a Cisco exam is a straight up refund as long as you are 24+ hours out. Can someone verify this is the case? Reason being- I want to get my CCNA again (last time I had it was 640-802) but I'm not sure if I want to do the whole exam or split. I would like to get something on the…
-
route summarization 20.0.0.0/8 or /14?
Hi all, one of Chris Bryant's videos has the following route summarization example: R2 has loopback21 (20.1.1.1/24) and loopback22 (20.2.1.1/24) and RIP summarizes the two addrs as 20.0.0.0/8 video:https://www.udemy.com/ccna-on-demand-video-boot-camp/learn/v4/t/lecture/5816672?start=0but But from my understanding, these 2…
-
What Happens if both sides of a link have different ospf cost
Router A interface ========== Router B interface What happens if I configure "ip ospf cost 1 " on Router A interface & "ip ospf cost 2 " on Router B interface? Which cost will ospf use for calculation when transversing this link?
-
802.2 and SNAP
What is 802.2 and SNAP?
-
3560x Catalyst http interface
I just reset my 3560 switch and I am trying to access the switch via http @ address 10.0.0.1 Now I am being asked for " a user name and password. The server reports that is from level_15_access." Where do I go from here?? I have not done any configuration to this switch via console port. I am currently connect to the…
-
FA ports L2?
Let me make sure I am understanding this correctly. Doing some labs on my own in Packet Tracer today playing with the different ports and connection types and configuring different subnets and using console and telnet sessions to do so (to mirror the test).... I am able to go router to router with a serial connection with…
-
Cisco iWAN
Ok, totally bamboozled. I get it's some kind of software defined WAN tech that sounds awesome on the face of it, but what relevance is it to the CCNA? I see NOTHING in the exam objectives about it, and nothing on any forums? It just seems to be a totally out of context, random couple of pages in Todd Lammle's book, but…
-
How to tackle ICND2?
Hi guys, I passed CCNP SWITCH 3 years ago and couldn't get myself to prepare for CCNP ROUTE & TSHOOT (eh) and since I cannot prepare myself to take those exams in 4 weeks, I was thinking about cheapest option to keep my CCNA. I decided to approach ICND2. I am pretty experienced (4+ years enterprise networks), but I don't…
-
210-260 Study Materials?
About to start studying for the 210-260 exam. Plan is to do about 2 hours per day M-Th, with no less than 2, but hoping 3-4 hours Fri-Sun. Now, looking for best videos, books, questions to help me prepare. What has helped you the most, LiveLessons, CBT, Chris Bryant, etc? Thanks!
-
need help in redesigning a network
Hi guys , I need some help in designing a network for a buddy of mine.i would like to incorporate some cisco routers and switches in the design. here is the topology and the issues associated with this setup. here are the issues he is facing with this network: 1.everymornning the internet connection drops off after using…
-
210-260 done !
After 6 months of self study and labbing I finally got my CCNA Security cert ! I did this during full time job in different field ( prepress ), but now, maybe is time to switch. After CCNA:R&S a quickly decided which way to go. People says that i am scrupulous and yes indeed I fell so to be strict and principled and imo in…
-
CCNA Passed. Materials Used, Methodology, etc.
Hey everyone, Just passed 200-105 with an 836. I'll keep this short; kind of. Materials: Lammle's 200-105 study guide. ITProTV Accelerated 200-105 with Lammle. Boson 200-105 Pratice Tests. Equipment: 4 routers, 2 Layer 3 switches, 1 layer 2 switch. Methodology: Read through Lammle's study guide and created flash cards…
-
CCENT 100-105 Failed 755
Just got home from taking the exam. Actually had a #6 sub "Mike's Way" at Jersey Mike's to soften the blow afterwards. First Cisco exam for me. Last exam I took was the Novell CNA back in 2001. Last 4 companies I worked for didn't care if I had a cert or not just as long as I had demonstrated experience. Now that I've been…
-
Line VTY in Packet Tracer
Configuration logging into my switch from a pc through a console cable and terminal session. #enable #conf t #line vty 0 15 #password () #login #end #wr #logout #enable #conf Now my question here is why does it not prompt me for a password when I logout/login or open a new terminal session from another PC???
-
Vlsm
In class he did variable length subnet masks. What is it and how does one do sums with it?
-
Passed CCNA 210-250
I passed SECFND today with a 836. I needed 825 to pass, so it was a little too close for comfort. I really thought I was going to score higher because I felt pretty confident while I was taking the test. I didn't like not being able to go back to change answers. I would have gone back to change 2 that I knew were wrong.…
-
CCNA book that's not Lammle or Odom
I'm looking for a supporting book to go with the Cisco book.I used the CCENT for dummies by Glen E Clarke for my CCENT and absolutely loved it, I found it really easy to follow then used the Sybex book to fill in any gaps. I ended up with a very high score. Problem is I can find a book for the full CCNA that I find easy to…
-
Wireless Outage I Caused Today Need Help Understanding How
So as you may have read I caused a boo boo on the network today. Lucky for me EVERYBODY in my company uses wireless all day every day so this looked pretty bad on me . So here is some back ground: I've been troubleshooting with Cisco loss of NTP / SNMP traffic when leaving my WLC. Turns out we at least found out why. This…
-
static routes (optimal next hop)
Hi all im just on Packet tracer setting up some labs say for example i have 4 routers in a ring and a switch off each router with one pc connected to each switch For static routes from Router5 in pic i was using all the same next hop , so to reach PC 2 i'd use 10.41.12.2 (gig0/1 of router4 in pic) and same next hop if i…
-
My Thoughts on the CCNA Security exam!
My thoughts on the CCNA security! The exam is a mixture of basic Security Concepts and advance network security concepts such as Firewall, VPN, Host IPS and IDS, concepts in depth. In other words the exam is in between a CCNA level exam and CCNP level exam. You have to look for outside information such as white pages on…
-
CCNA Composite Failed
Hey, Everyone I notice alot of people posting passing results, but not much failures. So, I'm here to inform everyone here of failing. I'm hoping you guys can learn from my mistakes and perhaps make some suggestions to help make some improvements. Failing is embarrsing it's just ugh! Walking back to the hot girl behind the…
-
Help -- Segmenting and Controlling Wireless Guest Networks
So I recently moved to a new company where the wireless infrastructure appears to have a lot of holes. I've been here just a hair under 2 months and am finding issues left and right. Which for me I welcome the challenge, especially when it comes to wireless since this is less than one of my strong suits. So... Yesterday a…
-
Latest Net+ update vs CCENT
I have been searching the forums for a recent similar question. How much more material is covered by the CCENT than the Net+? Does the CCENT get deep into command line with the Cisco IOS or is it mostly theory related concepts? At this point does it make more sense to go the CCNA route or to go the 2 test route with the…
-
equipment for building a home lab
Hi. I just failed my ccent 100-105 and am planning on bringing my study to the next level, so I can pass this exam by the end of the summer. I subscribed to cbtnuggets and would like to make a home lab. Cbtnuggets recommends a general setup regarding routers and switches etc.. Does anyone have any recommendations about…
-
Has anyone used this lab book?
Looking for a book full of labs. Here are the 2 options I have ATM. https://www.amazon.com/101-Labs-Cisco-CCNA-Exam/dp/0955781523/ref=sr_1_7?s=books&ie=UTF8&qid=1499086393&sr=1-7&keywords=ccna+lab Cisco CCNA Lab Workbook 200-120 - CertificationKits Thank you in advance. Which one do you think is best or has one of them…
-
VLAN DHCP Pool
I've just setup a VLAN on a L3 switch and now need to create the new DHCP pool on the router to assign IP's to the VLAN. I have the L3 switch connected directly to the router in which all my DHCP pools are on but the PC's on the VLAN are not grabbing an IP from the pool. Config below... Switch: ip routing ! interface…
-
RSTP Can Desginated Ports be Alternate Ports
So im learning about RSTP but im a little confuse about Alternate ports. I know they are support to be the port with the second best root cost to the root bridge ,but does the port have to be in a discarding state? On the Cisco Docs it claims that the alternate port is the port in a blocking state but receives the second…
-
Solicited node multicast Excluded from filter list
The link below kinda explains it but not good enough for me Why exclude something that from your list of filters 28:30 is where it is talk about https://www.youtube.com/watch?v=O1JMdjnn0ao
-
newbie needing help and advice
Hi I'm looking at going through the 200-105 exam eventually using the accompanying books and i'm looking at getting a home lab instead of software so far i'm looking at 3 1841's and 3 3560's i know i'll need crossover cables to connect routers to switch's and vise versa but i was wondering what other cables i might need.…
-
Need some input on my lab equipment and where to go from here
Hey all, long time lurker here, newly registered to post though. A little background info on myself. Been in the tech field probably since high school (almost 12 years ago) where i took Cisco NetAcad classes dual enrollment through a local community college. Being from a pretty isolated area I didn't really get to use any…
-
Study materials for CCENT and CCNA for a completely new guy???
I have just been given a new job in the Army as an Information Services Technician. Most people are required to spend some time working with computers prior to this job, however this was a unique situation. As a result, I will be trying to play catch-up and keeping up in class. I will attend a 8 month school learning the…
-
To composite or not to composite
Hi guys, I want to get my CCNA, hopefully by the end of this year. About 3 years ago I passed the CCENT 640-822 but left it too long and that expired. I have been studying on and off for the new ICND1 and the older one 100-101. My question is, should i go for the composit this time around? Thanks in advance.
-
No connection to PC after setting up native vlan
Hi, I am new to networking and It may be simple solution for my problem. Although I read a lot of articles about native Vlan I still struggle to understand my problem for quiet a long time. I made this simple scenario in Packet Tracer. I have 2 PC-s connected to one switch, and switch connected over trunk port to router.…
-
Establishing SSH on Cisco Devices?
Why do we have to use the ip domain-name command to establish SSH on a Cisco device? I'm thinking it already has an IP address why must we use a domain name? what if we don't have a domain name to use? Thank You,
-
CCNA Composite Packet Tracer LAB ?
Hey, TE Members I would like to find out any packet tracer labs that I can work on which would be able to cover the entire scope of the CCNA? I was hoping something like a giant lab that encompases everything, I was just curious if anybody came across anything like that before. Thank You,
-
Had my CCENT Exam Today..My experience
Hey Guys, Although I haven't posted on this forum before, I have been ghosting these forums for the past few months as I studied. Some really good info, I would just like to share my exam experience as it was certainly unique (to me anyway) I'll start by saying my practice exam score leading up to this were around 65-89%…
-
ICND1 Study Materials
Hi everyone! I was still in college when ICND1/2v2 was the most current exam, life got in the way and I didn't study like I should of and didn't sit for the exam. I'm ready to jump back in and start studying for my CCENT/CCNA however. Going to do it as financially conscience as possible. I still have access to Packet…