-
traffic command on a cisco router?
Hey guys, is there something I need to enable on a 2800 or 1800 cisco router to be able to get the "traffic" command to work to show the Input and output of a router interface?
-
PRI/BRI interoperability?
I'm not sure if this is where it belongs since it is an ISDN question but since it involves CUCM I figured I'd put it here. I do not know a bunch about ISDN, and in googling have not found much info on the topic of IP-ISDN bridges beside hosting companies. In my lab I have a Tandberg Video Conf unit, that I hooked up to my…
-
Ccnp !!!!!
Sent TSHOOT packing with a 931/1000 and in doing so I finally joined the ranks of the CCNP! It took me 1 year and 7 months but I am finally done. Will post a more in depth write up of TSHOOT in a few. Now it's party time!
-
Smart Init is disabled. IOMEM set to: 10 Using iomem percentage: 10
Hello All, Not sure where to ask this. I was working on my 2611xm router, and the default IOS that came with it was c2600-ipbase-mz.124-25d.bin This image unfortunately doesn't support SSH. Therefore, I searched for the specific IOS that supports SSH and is compatible with the 2611xm (i used this site: Cisco Feature…
-
Kindle books for ROUTE
Anyone use the kindle format for their studies? I've always used physical books. I just got a kindle and have read several smaller business books on it and like it.
-
What books for CCNP? reading bad stuff about the official guides
Just got my CCNA and looking to jump into the CCNP. I am looking to do SWITCH first but i am reading that the official certification books from Cisco are not that great. Mainly they are lacking a lot of material on the test? Does anyone know a good site that gives a run down on what is not covered or recommend a better…
-
Is it a bad idea to pursue the CCNP with only 1 year of networking experience?
The title says it all. Thanks in advance :D
-
SWITCH Lab Scenarios
I'm currently studying for the CCNP SWITCH exam and was wondering if you guys knew where I could find lab practice scenarios. I have two 3550s and two 2950s. Ideally I'd like to find problem scenarios that require me to implement features (HSRP, STP, VACLS, etc), and for the scenarios to also include the solution so I…
-
Ohm Relay/Networking Rack - reviews and opinons?
[h=1]Ohm Relay/Networking Rack 45U Adjustable 4 post Open Frame Rack (19" standard)[/h] hey guys, I am considering buying this rack. great price for the unit but I cannot find any reviews on it. I hate buying stuff without a review. The price is great and well. I want this for my home lab. I am leaving my dorky shelving…
-
lan incremental implementation
Hi, I'm dealing with the implementation questions in common section : example : When you create a network implementation VLAN solution, what is one procedure that you should include in your plan? * A. Perform an incremental implementation of components. about the network/ vlan/ security implementation/ verification best…
-
Crushing Defeat - TSHOOT
Well...I did not pull out a pass. In fact, I got there, found out all my usual troubleshooting commands were disabled on the sims...and pretty much went into a tailspin from there. Things that should have been easy suddenly became hard and I spent far too much time scrolling through show runs. I should not have wasted time…
-
Passed CCNP Switch
Hello, I have been following these forums for a while now but have not made any comments on here until now. I have found many of the tips on here very useful to studying for the switch exam. I used the Implemeting Ciscp Ip switched networks. I would say that doing labs is essential to pass the exam. Make sure you…
-
lacp port priority
Hi, I don't understand response D supposed to be true of question : Which three statements are true of the Link Aggregation Control Protocol (LACP)? (Choose three.) A. LACP is used to connect to non-Cisco devices. C. LACP packets are sent with the command channel-group 1 mode active. D. Standby interfaces should be…
-
TSHOOT Study Methodology?
I apologize in advance if this question has been asked a bazillion times already. Unfortunately, I'm on a short study timeline. So, I'm looking over the TSHOOT topics and I'm wondering...is there a study methodology for this exam beyond just memorizing the ITIL and troubleshooting methodology stuff and then knowing how to…
-
Strange Turn of events..
Yup.. Back. Long story short.. 1. Left Job due to T3 Voice group being lame with no openings for over a year and nobody wanted to hire a JR Voice guy outside my current place. 2. Lost time on voice and knowledge. 3. Quit Job.. 4. Hired to do RS+Security, which sec was crash course for me but hey.. I know my ASA's now. 5.…
-
Cheapest Router for IOS-XE
Hey guys, I put together a lab and want to see if you all knew of an expensive router that uses the IOS-XE. I already got a couple J-Series routers that run JUNOS and they weren't too expensive. Does Cisco have anything like a J-Series Router? Thanks,
-
MPLS Questions from the books I'm reading
Hey guys, Spent some time reading on MPLS today and wanted to go over what I read with you guys, to make sure I'm understanding things correctly. This is how I see the MPLS cloud looking, in terms of MPLS Frame traversing through an LSP. First you have your Customer Edge Router, which will peer with a PE. This PE will be…
-
Cheapest Router for IOS-XE
-
MPLS Questions from the books I'm reading
-
Cisco ASA 5505 used just to Tunnel VOiP ?
I know that the 5505 can't do trunked ports. And I know that the current license will only allow I think 2 interfaces for VLAN. But, is it possible to parse out a subnet from the inside and tunnel the VOiP traffic to a corresponding ASA 5505?
-
SECURE study material?
Anyone have any recommendations for the SECURE exam as far as study materials are concerned? I saw the CISCO book received dismal reviews on Amazon. Any alternative materials, book or otherwise, out there that anyone had success with? Thanks in advance.
-
Which test should I take first
Hi Guys, My CCNP is about to expire next February so its time to start hitting the books again. I figure I study for the CCIP since it seems to be very useful for the ultimate goal (CCIE). I have been thinking about taking the MPLS first but by reading the posts it seems that the BGP test will be best to take before the…
-
MPLS Study Material + SPEDGE
-
Switch OCG now has missing material?
I got my CCNP SWITCH Official Certification Guide in the mail today and in the back it has an added section with everything from the authors site that is supposedly missing from it CCNP SWITCH « Ponder the Network (and other things) The book says it is version 6 from December 2011. Is that all of the missing material or is…
-
I'm back and prepping for TSHOOT and finally CCNP
Had about a month's worth of work and personal stuff to catch up on after passing SWITCH before clearing my plate to take TSHOOT and getting my CCNP cert. I probably could have taken it right after SWITCH, but I was so busy that I just didnt feel ready. What I'm using over the next two to three weeks to prep for TSHOOT.…
-
Supplementary material for SWITCH
I have the OCG CCNP SWITCH book, but I'm almost done reading it. Is there another good reading source for this test? What good testing material is available out there to check oneself (other than what I'm doing in my labbing)?
-
Starting to study for Switch
I passed my MCSA 2008 upgrade/MCITP yesterday (out of all the exams I've been taking, this was the hardest for me) so I'm moving on to start studying for my 3rd CCNP exam - Switch. Any suggestions? I studied just under 2 weeks for Route, and TShoot wasn't nearly as hard as I expected, but I'm feeling like Switching is…
-
explanation to "tacacs-server directed-request"
According to Cisco documentation "tacacs-server directed-request" command causes the router to split each username into two parts, separated by the @ symbol. The first part is the actual username used for authentication; the second part is the name of the TACACS server to send the request to. Disabling this feature causes…
-
QoS LLQ
Just revising CVOICE v8 and looking at QOS. The cisco model recommends 33% for RTP media, 5% for RTP signalling and then all the rest. From my limited reading so far, would this be a valid config? (my router takes the config, but that does'nt mean it will work). Voice and video sharing the same PQ, but treated differently…
-
ISDN PRI & D-Channel
Dear Friends I wish you are fine ...... I am really confused regarding ISDN PRI and i wish you could help me understand it ......... When configring my T1 using pri-group, I am using CCS style signal (ISDN for example) .... I can configure multiplie pri groups with each pri group have some timeslots and each pri group can…
-
External connection setup for a SWITCH lab
For those who've connected their home SWITCH lab in such a way as to allow external connections, can you give me a quick rundown on how you accomplished this? The hardware/software I have (or is coming) - Cisco 2509 Terminal Server (On the way) Cisco 3550 Switch EMI load x 2 Cisco 2950 x2 Windows 7 workstation External…
-
cisco lab setup for ccnp
Hello I am trying to build my real cisco lab , I am already bought 2 x cisco 3550 emi switch 4 x cisco 2950T switch 4 x cisco 2620xm 1 x cisco 2621 1 x cisco 2620 1 x digi 32cm as access server 5 x wic 1t 3 x wic 2t 1 x NM-8A/S now i have a problem how i can connect of of these , i need some one professional to help me out…
-
What Terminal Emulator Do You Use?
Hey guys, Trying to get a good idea on what terminal emulator I should be using with GNS3. I like the look of Secure CRT but don't want to pay the $99 for it. Any other cheap / free ones you might suggest?
-
show ip route output
Quick question. What does the * denote in the show ip route output below r4#sh ip route 10.2.2.0 Routing entry for 10.2.2.0/24 Known via "eigrp 100", distance 90, metric 158720, type internal Redistributing via eigrp 100 Last update from 10.1.43.2 on FastEthernet1/0, 00:38:42 ago Routing Descriptor Blocks: 10.1.43.2, from…
-
Networking Career Path
Hello TE community yesterday I came across an interesting forum post where someone was asking how hard is the CCNP exam.What made the forum post interesting was the discussion about being a server admin before doing networking .To not stray away from the topic in that thread I decided to create a new thread . So my…
-
ccnp:security firewall new exam topics (642-617 vs 618)
I can't see where they differ too much. So the firewall exam is changing at the end of the month from 642-617 to 642-618. I checked the exam topics on the cisco website and cant really differentiate much between the two. If I have been studying with materials for 617 can I sit for the 618 without having to read a new book…
-
Advertising Static Routes with Network Statements
Hello all. So at work, I've been given the task to migrate a smaller network based on EIGRP/static routing to OSPF. The boss tells me he doesn't want any redistribute static or connected (i.e. clean config), so I'm looking to advertise some external customer routes via network statements in EIGRP and then OSPF at a later…
-
IP CEF and Routed Ports
I was wondering today (and unfortunately will not have access to my lab for a while and would like a quick answer) if there's any difference from an IP CEF perspective whether you're talking about routed ports (no switchport) or layer 2 switchports. I know there shouldn't be a configuration difference, I'm mainly looking…
-
Realistically how hard is CCNP if you are not working in Networking?
As the title says I'm working in IT right now, (Data Center Technician) but not networking. I have a CCNA and I'm trying to find a networking job, but it has proven difficult. I want to keep learning though so I don't forget stuff, but I here the CCNP is pretty hard to pass if you don't work with networks everyday.
-
IKEv2 for site-to-site tunnels
Anyone here use IKEv2 for site-to-site tunnels? Any gotchas to be aware of? I'm specifically looking at implementing it on ASAs running 8.4(3). Both ends will be running the same code.
-
how to view needed privilege level for certain command?
IOS supports sixteen privilege levels(0-15), but by default all the commands are grouped into level 0(zero), 1(user) or 15(enable). For example level 0 has commands like enable, disable, exit, logout and help. Level 1 has lot more commands and level 15 allows all the possible commands. Is there a way to check which command…
-
"aaa authorization exec default group tacacs+ local if-authenticated" explanation
I have a following simple AAA configuration: C3550-24-A#sh run | i aaa|tacacsaaa new-modelaaa authentication login default group tacacs+aaa authentication enable default group tacacs+aaa authorization exec default group tacacs+ aaa session-id commontacacs-server host 192.168.1.65 key Pa55w0rdtacacs-server…
-
I passed Route today!
I wasn't sure if I was ready (honestly, with Cisco, I'm never sure) and I just started studying for it after passing TShoot 2 weeks ago. I got 100% on the labs but struggled with the multiple choice questions. I am taking my MCSA upgrade - 70-648 - next Friday so I will start studying for Switch after that. I'm honestly…
-
Cisco CCNP Route Practice exams needed
Hey Guys, I have been following various threads on tech exams but unable to get any link on CCNP route (642-902) practice exams. Can anyone point to good practice links? I have planned to appear for the exam by end of May 2012.
-
Trouble with mpls vpn and P router
Hi, I've configured a basic topology with 2 PE routers, 1 P router and a CE for every PE. The protocol running PE-CE is RIP configured for VPN, with redistribution into MP-BGP. The IGP in the core is OSPF. When I connect the PE's directly I get ping from CE to CE, but when I connect them through the P router I can't seem…
-
Fail to install CUCM 7x on ESXi 5 from vSphere client: OS not found
I installed a Windows 2003 DC just fine. It was loaded from an ISO file after I changed the boot sequence. But somehow ESXi5 just won't detect CUCM 7x ISO. Have you experienced similar problems? CD/DVD: CUCM 7x ISO file on Datastore 1; connect at power on: Checked BIOS boot sequence: CDROM then hard drive then whatever. I…
-
CIsco 7961 rings after hang up
hi forum, i don`t know if i`m right in this section but i just want to ask. ;) I have a Cisco 7961 Phone which i have used for my voice lab. Now i have installed a SIP load and want to use it with no Call Manager. This worked fine with a SIP Voice Provider. The only problem i have. If i pick not up the phone and the oter…
-
CME Question
Hello all, Haven't been around much lately since taking on a new role back in August, they needed ALOT of work and I think I've finally got the place caught up. So my company is still using an old Alcatel PBX solution for their phone system and are looking to eventually convert everything to a Cisco IPT solution. Starting…
-
Up to Discussions in Certifications 5 Views 0 Replies Latest reply: May 12, 2012 11:3
I know the certification is valid for 3 years but what about time frame for the exams? For example if I take CIPT1 in 2007 and I complete the rest of the certification requirements in 2012, Will I still be certified? Or the exams also have to be completed in a 3 year time frame as well? Thanks
-
Trouble with mpls vpn and P router
-
CCNP Recertify advice
Hi, guys and gals. My CCNP is due to expire in February... 3 years ago, it was 4 tests including Route, Switch, ONT, and ISCW. I enjoyed the ISCW material, but really struggled on Routing and Switching, barely squeking by with passes on both tests. I see now that they've done away with ISCW and ONT and replaced them with…
-
Assymetric Routing - ASA SSL VPN
I am configuring a ASA 5505 HA Pair to essentially be used as a VPN concentrator only. This device is meant to sit on the DMZ, accept incoming SSL vpn connections, both web and anyconnect, and then drop them onto the corporate LAN. I have a connection to both the DMZ and the LAN and can connect to the ASA's using…
-
Passed route!!
I just passed my route today. I must say the exam was tough. You really got to know the stuff. Excellent score. Switch here i come!!!!!!!!!!!!!!!!
-
DHCP Snooping - shared storage
All, Just getting started back in certs after a good while here. I am still rebuilding my lab, so I can't test this at the moment. But I noticed that you can store the DHCP snooping databases on a tftp/http/ftp site. Can I have multiple switches share that same databases somehow? What advantages other than storage space…
-
CCNP Voice Exam
Hi Everyone, I passed CVoice almost a year ago, and I would like to continue my goal to CCNP Voice, should I take 642-427(TVoice) or 642-447 (CIPT1) for upcoming exam ? By the way, I've got hand on experience on CUCM. Thanks a lot
-
Route map and tagging to prevent routes coming back in
I setup this network and wanted to prevent routes being redistributed back into the OSPF Process they originated from. I believe it would cause routing loops otherwise? can anyone confirm or deny whether my config looks OK please? pic attached
-
IP default-network command is driving me insane
Hello I am have major problems with IP default-network command to the extent I don't seem to know whether i am coming or going My understanding of it is is that its used within EIGRP or RIP? And you use it to specify a single exit point but in order for it to work the route to that network must already exist in the…
-
Best CCNP Training School
Hi All, My company wants to send me to CCNP classes this yr. What school do you recommend that would not only help me pass the test but further my knowledge? I feel if i had a week to go through a class I would get a lot better. I just want to make sure i pick the right school that's going to be more hands on. Not just…
-
IPS lab
since the vpn and firewall exams are getting change ama start with the IPS after finishing the secure what can you recommand for the IPS lab 4215 enough ? and how many IPS ? studying IPS require knowledge of cisco ASA ?
-
Question about Limiting Internal DN Dialing
I have been looking at several options about restricting internal dialing for a site to only a specific DN prefix. Here is my dilemma. All of the internal DN's are in the same Partition. So lets say I have 1xxxx-8xxxx DN's in this partition and I want to limit specific phones to only be able to dial 4xxxx DN's. Initially I…
-
IP routing turned on - then what?
hey guys I am trying to setup a gw on a L3 switch at a branch office and want to make sure once i turn on IP routing on the switch what should I expect? will it funk out and lock all vlans up? I just want to know what to expect? should I have some kind of defaut route setup it does have a management vlan setup already but…
-
configure two ports with identical IP address configuration
I have a Cisco 1841 router with Fa0/0, Fa0/1 and Se0/0/0:0 interfaces. Fa0/0 is facing the LAN. At the moment WAN interface is Se0/0/0:0. It has following configuration: interface Serial0/0/0:0 ip address 10.10.10.165 255.255.255.254 secondary ip address 192.168.1.158 255.255.255.252 encapsulation pppend I would like to…
-
OSPF Between Areas
Hey guys... I'm practicing a lab scenario, and came across something confusing. R2 is an ABR and has one interface in Area0, Area1, and Area3. Here is the topology: R2(Area1 Interface)R3(Area1 Interface) R2(Area3 Interface)R8(Area3 Interface) R3(Area3 Interface)R8(Area3 Interface) R1(Area1 Interface)R3(Area1 Interface) R1…
-
thick trunk copper cables CAB-SFP-50CM type???
hey guys, I am looking for thick trunk cables with RJ45 female plugins (similar to the type of cable CAB-SFP-50CM type prefer yellow..any of you guys see thos around..I see the premaid ends and hard wired type but is there a place I can get RJ45 ends same type of thick wire to plug into the SFP female plugins?? I have the…
-
HELP! Need recommendation on training/reading!
I just got possible offered a 960 hour contract to "assist with the design, implementation, testing and support of the Customers Cisco Unified Communication Manager solution as required". I've worked with it some, practiced/played around, lab some it, etc. I told them I'm not a uber genius at it but I'd be willing to do as…
-
Passed ROUTE!!!! - feels like Cisco has rattled my soul
Passed ROUTE bang on the passing score. I feel like Cisco has rattled my soul. Got to the last sim and froze when I realized how many questions I had left and how much time I had left but I made it. I used the ROUTE FLG and although it was a beast of a book I'm glad I read every page. I'm now looking forward to the SWITCH…
-
CUCM 6 Console login problem
So I installed CUCM 6.0.1.2000-4 on a VMWare Workstation 8. 1tb drive Core i5 2 cores 1024Mb Ram etc.. Install went fine I made two accounts + the admin password during install. ccmadmin password cisco ccmuser password cisco Admin pass cisco1 Now these are not my actual passwords since it will not let you use such short or…
-
detect IP address of a non-accessible machine
I have one old special-purpose device which is running Linux(kernel 2.0). While it supports monitor, I don't have compatible keyboard for this device. It has IP address configured, but I have no idea what it is. There is no documentation and I can't nmap 0.0.0.0/0 :) If I connect my laptop to Ethernet port of the device…
-
Passed TShoot
I went the backwards route and took TShoot first. Up next, route. I recently joined these forums. Haven't been posting, but have lurked a lot and appreciate all the threads from people prepping and (hopefully) passing.
-
LSA Refresh
Hey, Just curious on why LSA age timers go above 1800 seconds. If they are refreshed every 30 minutes, then how is this possible? I have a small topology (3 routers) and the output of show ip ospf database indicates LSA Ages of 1900+ seconds. They don't actually go above 2000 seconds, but I thought they should change at…
-
configure two ports with identical IP address configuration
-
BGP Question
Hey guys... I had a question about BGP, and how it actually sends a packet. Consider this: R1---R2---R3---R4---10.1.1.0/24 Where R1 and R2 are core routers. R3 is a PE router. R4 is a CE router. R3 has an eBGP connection to R4. R3 also has an iBGP connection to R2 and R2 is the RR. R1 has an iBGP connection to R2 and is a…
-
Remote lab - connectivity
Evening.. New here and studying towards my ROUTE exam having cleared SWITCH last year. I've found two 2600s and two 2800s at work and managed to find space to hook them up to get a study lab going. My question is, for access from home, what would you guys recommend? I was thinking of a PC with a bunch of USB-serial…
-
Network Engineer your job Tools
This is for all engineers, what are the tools that you use on a daily basic. Mines are; Secure CRT Excel <--- to write configs Word <-- writing documentation Visio <-- for diagram Onenote <-- to save all my notes I'm looking into start writing my config on notepad++ suggested by an INE instructor. I don't have any…
-
Packet tracer problem
Hello folks! i am trying to set up a lab that can show the differences between RIP an OSPF, but i have a problem that is getting me crazy. i create the topology: host A > Switch 1 > router 1 > router 2 > switch 2 > host B Router 2 can ping host A and B Router 1 can ping host A and B But the host A only ping until router 1…
-
question about cisco access server and securecrt
Good day all, I don’t know how to setup my securecrt to let me start multiple TAPS Sessions through my serial cable (I have no Ethernet connection to my access server just octal cable which is using COM3) Is it possible to open multiple sessions to my router through console cable ? If yes please let me know how. Thanks a…
-
hi everybody 1st post - things that helped me in my ccnp
Hi Everybody, This is my first post at techexams - just saying hello . I am mainly a Cisco guy (CCNP and CCDP). Here are some things that really helped me through my CCNP (2010):* GNS-3 * Jeremy Ciora videos cbtnuggets.com * packetlife.net Plenty of patience and hard-work helped me pass too. I failed the route exam twice…
-
Need help with Quad Cards for GNS3 (Pics Included)
Hey everyone, Can you please tell me which quad cards I need to purchase for GNS3 that will fit my server? My colleagues and I want to build a CCIE lab and we already purchased the pc. This afternoon we're purchasing the power supply. Today I decided to just install the quad cards and come to find out they do not fit the…
-
ASDM hangs accessing IPS sensor
I'm working on opening up a case with TAC, but figured I'd throw this up there in case anyone else has encountered it. I am configuring a ASA-SSM-20 IPS sensor in an ASA 5520 HA pair. The IPS is running version 6.0.(6)E4 and the ASAs are running version 8.4(3) with ASDM version 6.4(7). I can access the IPS module via a…
-
Taking ROUTE tomorrow!
Hey guys, I'm taking ROUTE tomorrow morning. I have been killing it with the study and labbing since the beginning of the year and can't remember when I last had a weekend! I plan on spending this evening going over Boson's Exam C in study mode and doing one last flip through my stack of flash cards. Any last minute…
-
Passed route exam
Hey guy I passed the 642-902 exam today I must say it was a tough exam, with some crazy sims ,I dont know if im allowed to say this if not please moderate but on one of my sims they disabled the ping command which was really really odd but for the most part the exam was fair exam .Material used CBT nuggets FLG Implement…
-
frame relay problem in GNS3
I am having difficulty setting up frame relay in GNS3. The following output is from R1 R1#SHOW FRAME MAP Serial0/0.145 (up): ip 172.14.15.4 dlci 104(0x68,0x1880), static, broadcast, CISCO, status defined, active Serial0/0.145 (up): ip 172.14.15.5 dlci 105(0x69,0x1890), static, broadcast, CISCO, status deleted Serial0/0.12…
-
A tiny bit of help needed with IP Prefix list
how do you prevent all /24 subnets in a prefix list? i tried 0.0.0.0/24 thinking that may work but it didn't. I also want to know how to prevent all subnets with a /24 to /28 inclusive I tried seq 5 deny 0.0.0.0/24 le 28 and then a seq 10 permit 0.0.0.0/0 le 32 on the last line. It didn't work. Please help.
-
NetBrainTech
Has anyone tried this program? Or know how much it costs? I need help with creating documents and visualizing how to be able to troubleshoot my environment. A co-worker of mine found this software from this company. He never used it but it seems to do a lot. If anyone has tried it please let me know. Thanks AJ Anyone heard…
-
Multicast on CCNP ROUTE?
Hi guys, I encountered 1-2 Multicast (IGMP) questions on all three of the Boson Ex-SimMax exams for ROUTE. I note that Multicast is not on the exam blueprint. I logged a support ticket with Boson and this is what they said: "Cisco's blueprint for the exam also lists topics that are not on the exam. It is possible you will…
-
Boson exam question - OSPF domain back-up
I struck this in a Boson Ex Sim Max ROUTE exam this morning and I'm sure based on the diagram that route tagging could be a correct answer. See attached question and diagram. The explanation states that prefix based filtering must be used because that's the only way the domains could be backed up. So essentially if Router…
-
snmp-server view cutdown ip.22 excluded ?
Recently saw the CPU going up to 95%, Was following a Cisco TAC case which suggested the following commands snmp-server view cutdown ip.22 excluded what does this mean ? and how did it help to cut down the CPU on the router ?
-
Need help with site to site VPN via ASA 5510
I would like to ask the people on this great board that have more experience than me, how I should go about this. I do not want to create a security vulnerability. We are in the planning stage at the moment. My issue is that I have a vendor that wants to setup a site to site VPN for VOIP on 5 ip phones. These will be…
-
Working towards CCNP...
While I fully intend to tackle the CCIE R&S when I'm done, I'm finding it hard to keep motivated at the CCNP level. Switching was fairly easy for me, but routing is kicking my ass hard. I understand all of it, I just have a hard time memorizing all the little details. My goal was: Switch February Route March Tshoot April…
-
BGP Changing question
Hi all, I am not there in the CCNP level yet, currently doing CCNA: Voice but i have a project coming up and basically i need to reconfig the router to a new isp and form a neighbor with the new isp router with bgp. i read the chapters on bgp in the ccnp route book and i understood about 70% of it. the only route the isp…
-
Recording softphone (CIPC) calls
Hello strangers I was wondering if anyone had software they use for recording softphone calls locally on a pc. Currently we use a physical phone recording device from radio shack for recording on the hardphone, but need something for the softphone as well. We are not looking to deploy any remote servers for this, as its…
-
IPv6 over L3 etherchannel
I am trying to build the TSHOOT topology at home and hit a snag. I cannot get ipv6 connectivity to work over an L3 etherchannel at all and I cant figure out why. IPv4 connectivity works just fine. EIGRP is passing updates without issue. However, I cannot even get an IPv6 ping across that etherchannel. I am using 2 3550's…
-
Packet Tracer Challenge
wrong forum sorry, reposting
-
Last Exam - CCNP ROUTE
I took a few years off after completing 3 of the 4 (then) required CCNP exams and now find myself having to scramble to review and complete my CCNP Route studies. I have an exam date in less than a month, but luckily I have done some heavy study up to this point. Any advice? I know redistribution will be key. Any other…
-
eigrp topology
hello all working on ccnp route and eigrp now. i am using gns3 for the attached topology and my problem is that i cant seem to connect multiple physical links to fa0/0 ie sublinks R1(fa0/0.12) -> R2(fa0/0.12) as seen in the diagram. can somebody help out with this?
-
Route Redistribution Question
Hello All, I'm new here; been browsing and reading up as a guest for awhile but now I hit a wall and cannot find the answer in plain text! When redistributing routes I understand that there are two steps: 1) Routes "learned" in routing table are redistributed 2) Interfaces participating in the Routing protocol are…
-
CCNP ROUTE Passed...By a whisker!!
Passed with an 801... Sheesh!! I had a few more sims than I was assuming I would.... Holy Moly!! I could have sworn one of the sims had a bug in it, as I was 95% sure I had the (very basic) config right, but could not accomplish the specific connectivity task that was the whole point of the sim. I was under the…
-
Boson CCNP Routing questions
I've been attempting a few redistribution questions from the Boson routing practice tests but finding them a bit pedantic and just plain weird One questions asks for redistribution to be configured between rip and ospf domains. No problem I thought. First have to advertise the networks for both rip and ospf so that hellos…
-
Question on setting the local preference.
Hello. Need help on setting the local preference. Referring to the topology below, after advertising both links btwn R4 and R3 in BGP, i advertised R4's loopback into bgp, but i could only get one entry in the bgp table. Question; 1-Traffic exiting from R3 and returning to R3 should prefer the T1 link which is the s0/2 on…
-
Retirement of CCIP Certification