-
ISCW Scheduled
Hi everyone, its been a long time since i posted here, but i have been lurking here and there. I finally got the ISCW exam scheduled.. I been so busy with SkillsUsa and their competition, (i got nationals june-22) but ive also been studying and practing labs on this exam.. From what i heard its big on SDM,so im trying to…
-
Loop backs as BGP Neighbors
-
Need help
I am stuck. I had pe to ce ebgp configured yesterday, but my configs did save via gns3 for some reason. So, to day I reapplied everything and I cant get my ebgp session to come up. Below are the configs: CE router bgp 65102 no synchronization bgp log-neighbor-changes redistribute static neighbor 172.16.1.6 remote-as 65400…
-
Need help
-
Hosts plugged into 2801 WIC not receiving DHCP
I've got a bit of a random question, hopefully someone can shed a little light. I often configure 2801 routers to act as DHCP servers. Another network admin, while working on a config, made a mistake and it got me wondering. He has DHCP configured on the router: ip dhcp pool client network 192.168.1.0 255.255.255.0…
-
XMODEM image upgrade on MC3810v
I deleted my IOS .bin image from flash. I cant put it back on from ROMMON. I have tried all the tried-and-true tools to do this including: >copy xmodem flash >copy xmodem: flash: >xmodem >dnld I also tried: >upgrade-bh This is used for installing a new boot-helper (which by default is on EPROM, not flash) image onto flash:…
-
STP quickie
If i add a new switch that is configured with a higher priority than the default to the network that is 3 switches away from the ROOT Bridge what effect if any will this do to the users currently on the other switches in the network? Sorry for the brief question just looking for a cut and dry answer if possible.
-
show int fas 0/14 switchport question
Hi, While preparing for BCMSN, I practiced using bpdu filter on one of switch's interfaces R6A2950_0x2(config)#int fas 0/14 R6A2950_0x2(config-if)#spanning-tree bpdufilter enable after that I connected the port 0/14 to a different switch which was sending BPDUs to test how will the port behave. 00:12:04: %LINK-3-UPDOWN:…
-
New to the CCNP
Its time to start my CCNP and have decided to go with the BCMSN test as the first. I am currently reading the 4th Edition book and am trying to figure out what the resources are to do the lab sims (I have 3 3550's and a 2950, as well as a 3640 and a 3620) or some other form of help. If anyone knows the best approach to…
-
Advice for CCVP
Hi all, I am thinking to go for CCVP straight without going to CCNP,I do have interest and concepts of voip,working in the telecom sector. Below is the track i am thinking to follow, whats your advice please? is it the right way to go? 1. 642-642 Qos 2. 642-436 CVOICE 3. 642-444 CIPT 4.1 4. 642-453 GWGK 5. 642-426 TUC I am…
-
Help!! DSP's not reporting!
(sigh) Hi, all I have an NM-HDV with two (2) PDVM-12s, and for some reason, the DSPs aren't showing up with any of the relevant show commands. Also, everytime I try to set up a T1 CAS link with said DSPs, the router informs me that I don't have enough DSP to complete the configuration. % Not enough DSP resources available…
-
Finding WIC's online
I've got 4 2650XM's and none of them have WICs currently. Any recommendations? How much would a 1-serial WIC cost me?
-
Cisco WS-C2950G-24-EI Catalyst 2950 GBIC Switch
I just bought these switches on eBay so that I can start configuring vlans and playing with rapid-spanning tree more. Well, first the switches were never cleared of their production configs, but that is expected, so i put the switch back to factory defaults and it is up and running. I then went into global config mode to…
-
Geek Fight at Work
Ok, a colleague and I, at work, had a discussion on black holes in an MPLS network. The scenario is this: PE router with 2 trunks to the MPLS cloud loses OSPF. [PE] GE 1/0(Core router 1){MPLS Cloud} GE 2/0(Core router 2){MPLS Cloud} * OSPF down on both links * LDP and BGP stayed up My Argument: If OSPF goes down, and LDP…
-
Does Cisco have domain authentication change functionality?
What I mean is this. Say I want to change enable passwords on all 100 devices (switches routers firewalls) at our locations, you mean I have to ssh into each device and change them manually? What do people use? Does Cisco have some domain type setup so you can change credentials globally?
-
Real-world SMB Unity alternative...
Guys, I am deploying an ISR with CME for a 15 user small business, but I am really, quite frankly, not a big fan of unity. I am wondering what other options are out there, short of just scrapping my idea and deploying a trixbox. Can anybody recommend a 3rd party standalone voicemail/auto attendant? Thanks, HT
-
IGMP Snooping Questions?
I'm configuring a static multicast group to help support Microsoft Network Load Balancing in our datacenter. I have figured out what static arp entries I need to configure on the distribution switches (our layer 3 boundary) and have those ready to go, but I'm trying to figure out exactly how to configure disabling igmp…
-
SNAF exam question
I've been trying to find an answer regarding the version of ASA that the test is based on, and I can't locate a definitive answer. I wonder, cause I've come across a NAT/PAT feature change that has me worried... Prior to 8.0, NAT was unsupported in Transparent Mode. However, I just came across this page: Cisco Security…
-
Bsci
I will be starting my BSCI study, and my last day at work is tomorrow, I am looking to see if anyone is on the same situation like myself to dedicate fulltime study and ultimately finish CCNP in a short period of time given the circumstances but to also understand the content very well like we're competing for a suma cum…
-
All finished
Well, It is finished. I completed my CCNP journey today. I passed ISCW this morning. I must say for me this was the toughest exam to date, I know for other techs this exam seems easy but I took it all the way to the end finishing with only 16 seconds to spare. I kept getting up and pacing the room, the proctor was just…
-
Home lab questions.
Going to start working on my CCNP. Need help deciding what I need to pick up. Routers 2516 16/16 11.1 2610 64/16 12.3 2610xm 128/32 12.2 (2) 2610xm 128/32 12.2 2610xm 128/32 12.3 2512 in mail WIC WIC-1DSU-T1 (2) WIC-1T WIC-1DSU-56K4 (4) Switch 2950-24 1. Do I need any other routers like a 3640, or can I get by with what I…
-
straight cable used as trunk line???
Hey ccnp gurus, we had a vendor come into our work and setup up a fiber line 10meg. okay to a fiber patch panel and then the fiber 1 pair to the 2950 switch on a fiber port. then we are using port 1 of 2950 Lan port as a trunk to the Gateway router.(has csu/dsu built into interface) okay. for a trunk like to the gateway…
-
Wrongdefinition of promiscuous mode?
Promiscuous mode is a state in which a network adapter card copies all the frames that pass over the network to a local buffer, regardless of the destination address. This mode enables Network Monitor to capture and display all network traffic. This is a definition used provided my Microsoft on one of their FAQ. Correct me…
-
Geek Fight at Work
-
Traffic generator for multicast
Anyone got a suggestion for a good traffic generator that supports multicast? I'd really like to have an actual working multicast application in place of the generator but will take what I can get. Open source would be prefered but I don't mind spend a little bit of cash. I have 6 servers with ESX and just about any…
-
Doing CCNA (Voice) after CCNP
So with all these new exams that have come out recently i.e. CCNA wireless CCNA Voice, would it be worth it to go back and do them after one had completed the CCNP?? Or would most of the topics in the CCNA levels be covered in the CCNP track?
-
Passed GWGK 642-453
Just passed the GWGK test Wow! Passed by 50 points. My lowest score. You really need to know the materials. The test was quite tricky. It had choices really similar to each other to confuse you. I know the lab killed me. I needed to properly configure MODERATED. TUC is next and QOS will be my last one.
-
Help
What should i read for in-depth knowledge of ccnp at present i am using cisco press but i want more knowledge plz suggest me some good books
-
Dynamips, VM, and external switches
Hello Everyone I am going to start studying for the cnnp track, and am setting up a dynamups lab using gns3. I installed gns3 on a virtual machine in my server. I also would like to connect some 2950's to the virtual lab, and be able to remotely access the host. My thought is that I will have to add a nic to the server…
-
ASDM issue... no Hit count
Yeah, that pretty much sums it up. Our external Active/Standby ASA's (2 pairs) show the hit count no problem. When I mouse over the Hits column in the Access Rules page, I get the expected stats and "Update Interval: Every 30 seconds". They are running in single context mode. The internal DMZ Active/Standby ASA's (another…
-
Correct way to install AIP SSM's in failover ASA's?
Hello security buds, We are currently running two 5520 ASA's in active/standby mode, and I need to install AIP SSM's in both. I'm a little confused on how the failover works and configuration copying. I've gathered that the IPS config is not copied, so does that mean using the ASDM to manage the IPS is out of the questions…
-
Router for QoS?
Whats a good (but not to expensive) router to do some QoS study with? I have two 1721s and two 2611s which both seem to support all the QoS commands, but was wondering if there is anything more suitable. If i setup my 2611s as below, should that be a decent way to get some good QoS running? Obviously i have excellent…
-
Full IBGP deployment experience
-
642-611 Study Material
-
642-611 Study Material
So far, I've been reading MPLS and VPN Architectures vol. 1 and 2. I have also been doing lab work with GNS3; however, I don't seem to be getting focused on the test. Although the MPLS/VPN books are good for my job, I want to pass the damn test. What is the best study material to use for this test? I recently bought…
-
642-611 MPLS Scheduled
Well, I scheduled my exam. any helpful advice? It's not for a while, but I want to nail this test on first attempt. On a side note, how many people here work in a large ISP? I work for a global ISP in our backbone group; this is why I chose to pursue my CCIP before CCNP. I am lucky enough to see just about all the CCIP…
-
DSCP question
So i have reached the DSCP section of ONT, so far i think I'm understanding it fairly well... The only thing i don't quite understand yet (and maybe i just haven't reached this section yet) is how or what defines the type of traffic that belongs to a certain DSCP value. so i can define a class map saying 'match dscp af43'…
-
Unable to reset Cisco 7940 phone to factory default
I am not able to reset a Cisco 7940 (Sip) to factory default. I am following the steps listed below and every variation of it. I never get the message "Reset key sequence detected". Any ideas?? Thanks. ##################################### Simply hold down the # key while you power-cycle the phone. (If you already have the…
-
banner wildcard
At work the we have a generic banner we use on all routers and switches that is shown when people log in. I started using the $(hostname) wildcard after seeing it in a CBT nuggets video. Just wondering what other wildcards are available on the Cisco IOS? I know of $(domain), $(line) and $(line-desc) Been doing some…
-
2509 problems
Ok CCNP'ers I need some advice. Went to boot up my lab last night only to find out that I could not telnet to my access server. So I eventually consoled in, and found no output. I rebooted and it goes through what appears to be a normal boot, and then hangs right where it says "compiled by kellythw". I have went into…
-
backplane question
Hi. Can anyone please explain the actual, practical use of a backplane? Am i right to say that a backplane is the forwarding bus of a router/switch? Is the backplane capacity important to consider in typical networks, if yes, then why? Is there a reference available, some sort of guide as to what backplane capacity to use…
-
CCNP Lab PDU
Hey, I'm building a CCNP lab, just purchased a 20U rack and I'm thinking about power. I was wondering what people are buying for their UPS PDU's? Is there a cheap product out there that offers a sufficient amount of power for 20u devices?
-
Has anyone use rtp header compression?
tcp header compression or ip rtp header compression? im using g.711 for my remotes offices that only have 1 ip phone, im getting an average of 110 to 120kb per call i know g.729 take about 30-40k but they want the best posible voice quality, would the compression compress the voice packet a good amount of size of it really…
-
EBGP issues/question
Ok I have four routers, connected in a string like this: R1 <-> R2 <-> R3 <-> R4 R1 = AS200 R2 = AS100 R3 = AS300 R4 = AS400 Now, all routers can talk to each other (Directly connected neighbors, via ping and they all show as neighbors, just the directly connected neighbors). However R1 doesn't get routing updates for R4…
-
Cisco Press books for the latest exams?
Does anyone know if Cisco Press is planning on releasing books for the latest CCSP exams? I am starting down the CCSP path but I am a bit wary because of the lack of Cisco Press books. At least CBT Nuggets seems to have a few of the latest exams covered, with the exception of the ASA ones.
-
BCMSN passed
BCMSN passed - 938 Used the Official Exam Cert Guide (4th ed; read it 2.5x), Authorized Self-Study Guide (4th ed; has some good bits the other doesn't), and a pair of dusty 2950's. Gave the CBT Nuggets stuff a try, but found that it really wasn't for me. After some brews tonight, I'm gonna get BSCI with it.
-
WINS resolution in WebVPN
Hello again, So I've been working on a WebVPN for the past week and have been running into an issue. Using CIFS I am able to map to specific network shares by using the FQDN, but not via shortname unless I set the default dns suffix to the suffix of the device I'm trying to browse to. Our Wins environment is setup to…
-
ISCW Lab 3-9 v5.0 - SDM is timing out?
Hi, I'm trying to run this lab from the ISCW Lab portfolio: I was able to get SDM working before in a simpler lab (using same IOS) in which the host was connected to a router via the dyanamip emulated switch. However, this lab configuration is such that SDM is to connection to s0/0/0 in router HQ. I setup HQ to allow SDM…
-
No tclsh command :(
Hey guys, I've got a 3640 and a few 2621 XMs with IOS 12.4, but I can't seem to find the tclsh command! Do I need to enable it somewhere or am I using the wrong IOS? Any help is appreciated. #show ver Cisco IOS Software, 3600 Software (C3640-I-M), Version 12.4(16), RELEASE SOFTWARE (fc1) Technical Support: Cisco - Shortcut…
-
QoS is killing me.
Ladies and Gentleman, can you give your attention to me: Getting ready to go smooth off here. I'm trying to implement and End-to-End QoS solution beginning with classifying voice bearer and signalling traffic from both hard and soft phones. The voice traffic is originating from about 40 Cisco 2950-SI access switches. The…
-
Set me straight Mbps? or Megs?
Hey guys I am totally confused. I have seen so many people (professionals) use them interchangeably but isnt it this way? 100 Mbps/8bits per byte = 12.5 meg 10 meg line is really slower than 100 Mbps right??? we are getting a 10 meg fiber line but it is connected to smart jack then into a cat five? is that how it is…
-
qos 642-642
taking the test this month, i been reading and wutching the material for this test, doest seem really bad in fact looks like the ONT has anyone taken this test lately? '
-
qos 642-642
-
RIB failures in BGP (bsci labportfolio lab 6-3)
are rib failures in BGP ALWAYS something that needs to be rectified or just a way of indicating there is a better route? I'm doing lab 6-3 BGP on the bsci lab portfolio and following it to the word however when I get to section 9 before proceeding I do a sh ip bgp and there are rib failures in the bgp table. I do however…
-
Info Sources - Multicast?
I'm about 3/4 of the way through my BCMSN studies and I'm trying to hit my weak points hard. I know the biggest of those right now is probably multicast...does anyone have any good resources they could point me towards? I feel like the more I read that section in the Study Guide, the more confused I get. CBT Nuggets didn't…
-
CCNP Word of the Day
Penultimate Hop Pop
-
Packet loss
Guys, Just a quick question. Without hindering a production network...what is the best way to see if my 4948 switch is the cause of my packet loss? Any ideas? Ive already use the show interfaces command...
-
BCMSN Passed!
Another one bites the dust! Passed BSCI last August and took the BCMSN earlier this week - scraped it through with an 840, really didn't think I'd got the pass at all to be honest so was a surprise / relief when the congratulations message came up! Exam was tougher than I expected. I guess as I'd already done the BSCI…
-
Routing Concept done by CCIE
Ok so im reviewing the config done by a CCIE that no longer works here and i wanted to get the grasp of the concept. This is a remote Site with a bunch of clusters switches and one edge WAN router. Switch-cluster has the following config: VLAN 20: Voice 192.168.6.0 /24 VLAN 10: Data (clients and servers live here)…
-
Passed BGP Exam
So I took the BGP exam just a bit ago. Passed with 850, not too bad considering the exam and my lack of experience with BGP. The sims were cake, I think I have a harder time remembering the theory than actually implementing the configuration. I spent a lot more time on this one than I have previous exams, wanted to make…
-
Using a 2500 series router with octal cabling
Greetings: I have the opportunity to use Cisco gear from a closed down Cisco Academy.. the only problem is I am not familiar with how to use an octal cable. IF I have to do password recovery first, I will. I've read somewhere that you have to clear the lines before you start working. Do you know of a site or have any…
-
Cisco Output Interpreter
I came across this tool on Cisco's website today while at work and thought I would share it here. You can paste output from Show commands and it gives feedback on some possible solutions or things to try. https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl One catch with this though is I believe you need to…
-
route-map not denying
Hi. I configured two routers connected to each other point to point. Below are the config. R1: ip access-list extended test 10 permit icmp any any route-map test deny 10 match ip address test int f0/0 ip policy route-map test The thing is, when i ping from the second router and it goes through R1, the ping is successful.…
-
ASA Guides
Hello all, As some of you know I'm set to hit up training for ASAF in a few weeks, but with the recent outbreak of the H1N1 flu. I have been put in charge of a global iniative to bring up an SSL VPN as another product to offer as an alternative to our other remote access products. Since we don't know exactly how bad this…
-
Very dumb question
Ok.. first let me explain -- Yes, I have done labs and no I've never had to use these commands. I am taking the BCMSN exam tomorrow and I've tried to research this briefly -- but, could someone please answer: ip routing vs. no switchport (commands) Do they do the same thing? Thanks and sorry.. es
-
RIP summary-address.
Hi all, Using the "ip summary-address rip <network> <subnet-mask>" the documentation states that only one summary per major network per interface is allowed. However I am able to do more than one, and they get advertised as well... Got two interfaces: 172.16.23.1/30 172.16.24.1/30 I can then do: ip summary-address rip…
-
Should I buy Cisco PIX 515 firewall
Hi I have a second chance offer Cisco PIX 515 firewall $290 US dollars on eBay. I wonder should I buy this PIX for my home lab at this price ($290) or it is too expensive. I know nothing about PIX and just trying to pick up one to learn it. Thank you. Cisco PIX Security Appliance Software Version 8.0(3)Device Manager…
-
What to do with an old ISDN simulator?
Got an old isdn simulator that i bought two years ago. Haven't used it since I passed the BCRAN test. Any ideas on what to do with it? Thanks
-
Finally done
Passed BSCI about 30 minutes ago. Score was 877. Not exceptional, but better than when I took it when it was still 642-801... that one I passed by the skin of my teeth. Didn't score as well as I would have liked with multicast and ISIS, both were 75%. My BGP score was abysmal at 54%. All other testing domains were…
-
WS-3550 internet switch
Hey I work for a company and we have a really old 3com hub for our internet switch. I have a 3550 that I would like to replace it with. We have our firewall, vpn concentrator and internet router plugged into it. Our firewall outside interface is in half-duplex mode because of this 3com hub, can anyone provide a sh run of…
-
Passed BGP Exam
-
CCNA Expiring in August 2009
So it seems that my CCNA certification will be expiring in 2009. I haven't done much hands on cisco work outside of my own lab for when I was studying for the exam. My question now is, should I simply re-certify? or go for the CCNP! I've always wanted to pursue it, but I don't know if it's advisable considering I don't…
-
CCNA voice or ccnp or ccvp?
Hey guys, Please forgive me but I am not trying to belittle voip engineers but How much voip do I need to manage a voip system say of 200 IP phones and assorted POE switches and voip routers etc.. I mean an not be certifed. How much and what areas. I mean do I need to have 5 exams in CCVP to even manage QoS and voip…
-
Bcmsn 23/04/09
Well took this fella this morning. Glad to report i passed with a 889. The exam was pretty tough going imo and not to be taken lightly. To be fair, i feel i got hammered in all area's. Dont underestimate voip,wireless or switch security, on top of the rest of course! Resources used: cbt nuggets exam guide/self study guides…
-
CCNP exams refresh
Hi all, I remember reading a while back that the CCNP exams would be changing to a new curriculum soon. Does anyone have any information on this?
-
Scheduled my MPLS exam...June 2nd
-
Switch Security Question
If all access-ports are off VLAN1, would that eliminate any security issue of having VLAN1 as the native vlan on a trunk link?
-
Forcing traffic through proxy using Route-maps
Hi Guys a Quick Question any pointers would be very well recived. i have a 3560 to play with and i am trying to push traffic from 2 vlans (User) and (Guest) through a inline proxy connected in a loop only when they are accessing content outside of the Local network. so if user access's a local server then not sent through…
-
Anyone has taken TUC recently ?
Hi Any one here has taken TUC recently ? Could you please share your preparation experience ? Thanks
-
CCNP RAP - My music to study by
I hate flash cards, all the audio CCNP tapes are very dull boring. I have been doing music for a long time so I decided to make a song. This is the best tool for myself that I have used. I can remmeber everything from the song. I uploaded a snippet. I still have about 20-25 more songs to go. Took me about 1-2 days to…
-
CCVP Prerequisite
Hi, I have question about CCVP Prerequisite. I passed CCNA and completed CVOICE and currently studying QoS. Do I need to complete all CCVP paper before June 24,2009 ? or suppose If I am cant able to complete all paper before June 24,2009 then do I need give all paper again inlucing CCNA Voice ? Thanks in advance CCVP…
-
ZBF, ACL, and NAT
I am changing my Cisco 871 from the classic firewall to the zone based firewall. I have a web server that should be available to the internet. The web server is currently in the LAN zone. The router interface in the LAN zone is the inside nat interface using the 10.0.0.0/24 subnet. My service policy applied to the…
-
8hrs daily for BSCI
Hi everyone, I hope everyone is doing good! I'm currently unemployed (because of global crisis) and making my free time to learn about cisco networking. I finished my CCNA and passed the exam last 19-apr-09. I find it interesting, so I continue and currently preparing for BSCI exam to make my cisco knowledge solid. The…
-
Seeing all routes in a PE router
What is the most efficient way to see all routes in a PE router in a MPLS network? Usually you'd have to do: show ip route vrf WORD to see the route in that VRF instance, is there a better way to see all routes at the same time?
-
cheap Cisco Wireless router
Hello, Mr. Cisco guru(s)! How's everybody today? ^^;; I was looking over the eBay trying to find cheap wireless Cisco router? I need something for home. Any Ideas? Anything small and makes almost no noise would do! (My wife complaines always when I work on my rack!) Thank you!
-
ONT -- Network Audit...
I am in the first stage of implementing QoS. The Cisco Certification Guide says I need to do a network audit. I am well aware of squid, proxies, IPS(type) devices, etc... that are able to perform what I need. Does anyone have any suggestions of things they have implemented on the router within IOS that is helpful to get a…
-
QoS is killing me.
-
route-map question
Hi. I just wish to ask given i have a route-map which points to a wan next-hop ip that is online and applying this route-map to a lan interface, without using a default route, are all packets going through the lan interface still going to be routed to the wan router(the wan router has a route back to my router)? The reason…
-
show html [module|port]
Anyone has any idea or used this command? I haven't really find any info on the command on google & cisco site. A sample output: I ran this on a C3750 running IOS Version 12.2(25r)SEE3.
-
VLAN Hopping
Could someone tell me if newer versions of IOS have fixed this issue? It seems that a logical fix to this security exploit is to FILTER tagged frames on access ports. I know you can do this manually with ACLs, but I'm wondering if Cisco has implemented this as default behavior?
-
Vpn 3000 + asa 5510
Currently we have avp concentrator doing all of our remote vpns. The concentrator sits on the dmz. We tried to fire up a site to site vpn on the asa and that worked but took down all the vpns housed off of the 3000. Is there any way to get these to play nicely, or should i just migrate everything from 3000 to asa
-
woohooo passed BCMSN!!
Finally, after a good 4 months of studying this beast of a topic, I finally got the courage to take the exam and passed!! I am so relieved, I found that the topics in BCMSN weren't half as fun as those in BSCI, to be honest I found them significantly boring to study for (especially Wireless). Anyways 2 down, 2 to go!! I am…
-
Any body can Help Me please ?CallManager 6x for SIP Proxy
Dear for all, I want CallManager 6x for SIP Proxy function, how can i do this ? Thx Satria
-
off the topic, users satisfaction survey for network services.
Hi all .... I understand this is not a cert topic, but i have no where else but here :) Here in my company we are thinking to develop a satisfaction survey questionnaire for network services only. Have any one done such thing before ? Do u think that it will be hard for the user to differentiate between network services…
-
Welcome to the World CCIP
for all that don't know u need to pass BSCI MPLS BGP QOS
-
ACL at router or ASA
Folks: going over some access list items, specificlly sequence numbers in IP access lists; however, is it better to build ACLs on the Router that faces your ISP, or stick to the ASA? I am creating simple lists to block domains...nothing fancy. thank you
-
Fooling around with rip - again
Hi all, Again, I was fooling around with rip. This time i made a loopback interface with 192.110.1.1/16. First off, i thought version 1 would just summarize it to 192.110.1.0, but it turns out that rip version 1 wont advertise anything when its that supernet. Also, version 2 will send it with as 192.110.0.0/16 correctly,…
-
OSPF how common
Folks: Right now i am pushing through the OSPF topics, and I am having some difficult time remembering and understanding all the different topics; however, this section really interests me. How common is OSPF? I am not sure, but it looks like an Open Standard - were EIGRP is Cisco proprietary. Thank you, E
-
CHAP Authentication
Hey guys ! I've got an issue with CHAP and it's blowing my mind . First i'm not sure this is the right place to post that kind of question , and I would like to apologize to anyone offended . I'm actually having 2 routers connected by a Serial interface. The link is up/up , ping is OK , OSPF neighbors OK ! So everything is…
-
Utilising an 857W Router for Wireless only
Odd question, but I wonder if I could do the following. At the moment, I cannot use any router other than the one my ISP provides. This is fine, but the Wireless is diabolical on it. I have a Cisco 857W sitting around, and I would like to use the Wireless on this device. So Internet ----> ISP Router ----> Cisco 857W --->…