-
Percentage of IPV6 questions on ICND2 exam.
Amount of preparation needed for IPV6.
-
dhcp question
hi, I am new and i have a question about dhcp could anyone help: 1. Does a router know if it should not assign a broadcast address to a pc? or do we have to tell it to exclude when configuring DHCP? thanks. 2. how can I view the addresses I excluded in dhcp ?
-
IP Subnetting confusion subnet number incrases
Have an address 10.16.3.65/23 with a Network ID of 10.16.2.0. These are the tricky ones the ones that increase the subnet digit and not the host digit. You know what I mean all the easy ones they do on youtube.com where deal with subnets /25 and above But besides that this is the difficult part of subnetting crossing over…
-
Routers only know directly Connected ?
I keep hearing the phrase in videos that routers can only see as far as they're directly routes. Does that statement also refers to the fact that a router can only see as far as his "Next Hop IP, local router also ? As I understand that an IP packet must be forwarded to something the router "Knows about" .
-
Passed ICND1: A long time in the making.
Materials:* Packet Tracer (nearly exclusively) * CCENT/CCNA ICND1 100-105 Official Cert Guide (Wendell Odom's book) * ITPro.tv CCENT video series * ITPro.tv Free Labs * Transcender practice exams (Free with ITPro.tv) * Kevin Wallace's CCENT ICND1 100-105 Premium Edition Complete Video Course * Boson's Ex-Sim Max * Boson's…
-
EIGRP /Static routing questions
hi I am still new in networking. I have a few questions: 1. I want to configure EIGRP on this topology that already have static routes, Can I have both protocols on the same routers? 2. If yes how do I configure EIGRP as the main protocol? I tried setting my static routes AD to 91 ..but the EIGRP don't show on the routing…
-
Boson Testing
If I can pass the Boson practice exams with easy am I ready for the real thing. TIA
-
Advice For cramming - Just finished Cisco Academy CCNA Security
Just finished Cisco Academy CCNA Security, yet the depth of my retention of the material feels shallow. I completed all the labs except for the ones requiring ASDM, because packet tracer does not have ASDM. PLEASE give me some advice about what resources to use to prepare for the test.
-
Which format and when?
So the company offered to pay for training to get some Cisco certifications. I'm not new to networking or IT, but I've avoided doing infrastructure work for the most part so the Cisco specific protocols and IOS are new information to me. What I'm having trouble remembering is which format Cisco wants the network portion.…
-
'Network Fundamentals' & 'LAN Switching Fundamentals' topics
Hey all, I'm new to the forums here. Recently this week i failed my ICND 1 exam with a score of 813 My category scores were: Network Fundamentals-58% LAN Switching Fundamentals-63% Routing Fundamentals-80% Infrastructure Services-89% Infrastructure Maintenance-88% I realise i'm close to passing but those first two topics…
-
Kindlky correct my subnetting
Subnetting Example1 : 172.16.192.0/19 50 lans 70 users required. Next 5 lans and 10 users each is required. 1. 172.16.192.0 / 19 172.16.192.0 /19 =32 32 is Block Size 172.16.192- 224.0 192 to 224 is the network space available with block size 32 /19 = 2^3 = 8 Networks. Network : 172.16.192.0 Network number 172.16.192.1…
-
How are Cisco certification renewals handles?
Let's say I pass the CCNA exam and have valid CCNA for 3 years, then I get the CCNP a year later. Does that mean my CCNA is valid until the CCNP expires or before the 3 years are up for the CCNA, I can use the CCNP certification to renew my CCNA for another three years.
-
A good intro for networking book?
Hey guys Decieded to go for CCNA but I have no background at networking Can you reccomend a good book before I actully start studying for the CCNA? :) thanks alot
-
Looking to start studying for Wireless HSortly
Hi all, I have recently passed my CCNA in R&S and now looking to study CCNA in Wireless. I previously used INE vids and a couple of books for R&S. COuld anybody reccomed reading material please? I am not a fan of Sybex so ideally none of his books but willing to look into anything else. Thanks guys :)
-
Packet Tracer
Just downloaded Packet Tracer. I'm trying to configure an IP address on the routers interface but it won't let me. Router#sh ip int brief Interface IP-Address OK? Method Status Protocol GigabitEthernet0 172.1.1.1 YES unset administratively down down FastEthernet0 unassigned YES unset up down FastEthernet1 unassigned YES…
-
CCNA for Network+ study material ?
I'm currently in college and just got my A+ about a week ago. My school has a req that we need to get both the A+ and the Net+ to graduate, the thing about that is that so far for our school the pass rate for Net+ is 10% even with people that have been in the IT field for years in our class (lol I know it sounds crazy but…
-
Discovering Operating System using ICMP - Cybrary post
So someone at Cybrary posted an "article" or post or whatever they call it there with the above title. Below is what they posted. I replied to that thread and said that it is wrong and you can't simply deduce the OS by that information. My understanding is that that's not how traceroute works. Can someone more advanced in…
-
Drawing out your topology before labbing?
Before you ever connect a single cable in a physical lab do you generally diagram/plan out your networks on paper first or at least document/write down the configuration points/addressing? I assume if you try keep it all in your head things can get pretty messy, fairly quickly?
-
Static Route Help
Hey, TE Members I'm currently studying for my ICND 105 exam. I'm currently using packet tracer. I have the following configuration: Router A: Int serial0/0/0 Ip address 10.10.10.2 255.255.255.252 clock rate 64000 DCE - Connection No shutdown Router B: int serial0/0/0 Ip address 10.10.10.1 255.255.255.252 No Shutdown So on…
-
chicken or the egg
Generally speaking , do you configure the ip adress of the router first... or the default gateway of the end device ?
-
New CCNA/CCNP DC Exams
I just saw that there new CCNA/CCNP DC exams have been announced - is anyone planning on taking these? I really hope we get some quality OCG's from Cisco Press unlike the last revision of the exams. Thanks
-
CCNA - Blogpost
Hi Guys, Would it be OK to start a blog post on this section to document my studies to CCNA ? Or would i have to move it to a website like wordpress ? My current situation is an IT Contractor currently working in a Firewall Admin role, mainly Checkpoint and Juniper SSG/SRX, my contract will be coming to an end within the…
-
Best book for CCNA study
hey everyone, I am planning on studying to take the CCNA by December. I am wondering what study materials worked best for everyone out there? Any books, blogs, videos, or any other study material that really helped? Thanks everyone!
-
6/7 Days until Finals.....Prepardness?
Hi all, This is my 4th time taking the Cisco Netacad ITN course @ my college and next week we have our Final Practical and Theory exams. I'm trying to figure out what to focus on the most. Last year on the practical, I got a 70% but feel I could have done better. Were required to make a crossover or a straight through…
-
Static routes questions
hi I am still new in networking. I have a few questions: 1. is there any use to create static routes on R1 to "wan network" 192.168.1.0 ? if so why? 2. if I set a default route (ex.0.0.0.0 0.0.0.0 s0/0/0) on R1 is it necessary to create other static routes(ex.192.168.2.0 255.255.255.0 s0/0/0) in the same interface ?thanks.…
-
Is this cheating?
Hi, I am planning to attempt CCENT 100-105 next week after month of studies. I have worked out following "**** sheet". Is it considered cheating if I will memorize it and write it down on the sheet of paper provided for the exam by the examination center? I made that to speed up subnetting and it works well for me. Dec 128…
-
Destination MAC , Same Layer 2 LAN and Same Subnet ?
Hello, I am a network noobie. I was wondering if in order to get the Destination Mac-address Of an IP host that host must be on the same layer 2 VLAN and Same layer 3 Subnet :) ?
-
Cisco Packet Tracer Student STP
hye, i got problem with my work. i already work on the cost of the port and the priority of the switch but seem not working. i want g1/1 on LSW5 to be blocked but now i only got g1/1 on LSW6 blocked. and this also can only use one vlan 1. here is spanning-tree LSW3 VLAN0001 Spanning tree enabled protocol ieee Root ID…
-
Renewal dilemma
My CCNA and CCNP both expire on March 15 2017. I got a bit of a dilemma in my hands. Since I want to go into the security field should I take that remaining time to study for a CCNA Security exam, which will renew my CCNA, but kill the CCNP, or should I study for a professional exam and renew the CCNP, and not obtain a…
-
Layer 3 Logic, with Hosts and Routers
Hey, when a host wants to send a Packet to a Destination IP that's not in it's Local Subnet, the Layer 3 Logic tells the host to send the Ip packet to a nearby Router in it's local Subnet Correct? How is that logic similar to routers ? The layer 3 logic for routers tells the router to match The Destination IP with a Subnet…
-
Saw this Question on Cisco's Web site
Why can't I add this address to int vlan 10? int vlan 10 ip address 10.1.10.0 255.255.255.0 result is "Bad mask /24 for address 10.1.10.0" I added "ip subnet-zero" and it still won't work. here are the responses "It´s a trivial issue because we usually set the network address instead of port address. 10.1.10.0 network…
-
ACLS question
I was assigned to make an extended access list with these specifications A. Create 3-line extended ACLs on PHX-RTR-1 named PHX-LAN-1, PHX-LAN-2, and PHX-LAN-3 to prevent IP source address spoofing on these LANs. Only allow traffic that has a source address from the LAN it comes from. Allow DHCP requests: 1. Allow the IP…
-
Home lab topology feedback
I have created two different topologies for what I plan with cisco equipment I will have soon. Wanted to see if anyone had any suggestions or might see any potential issues. I am thinking of doing the second alternate image so that I can keep all cisco equipment together. Also possibly if the fan of a single 1841 router…
-
"Spanning-tree port-priority" command missing
Using Packet Tracer 7. I am starting to practice with STP. I noticed when configuring an interface that this command is missing. Is this just a limitation of PT or am I missing something. I was using the 2960 switch but I also looked at the others to with same findings.
-
VLSM question
I did not understand this VLSM question from learncisco.net is my explanation correct Question: You are implementing a VLSM network. You are using the Class A network of 10.0.0.0/8 and need to create networks that support 254 hosts that will be used for each LAN. The tenth network that was created will be used for…
-
Passed 1CND1 100-105 Today - My experience and materials used
This was my first Cisco certification attempt and I was very happy to come out with my 860 score. I always like to go with two different books (authors) when going for my certification. I went with the following: Wendell Odom's 100-101 CCENT and the 100-201 CCNA. Todd Lammle's CCNA Routing and Switching Deluxe Study Guide:…
-
L2 Switch not talking to Default Gateway
So here's my setup. I have my switch configured with an ip default gateway of 192.10.10.1 . I also have 3 VLANs configured on it as well . Vlan 10- 192.10.10.2 /24 Vlan 20- 192.10.20.2 /24 Vlan 30- 192.10.30.2 /24 My router is configured with 3 subinterfaces fa0/0.10= 192.10.10.1 fa0/0.20= 192.10.20.1 fa0/0.30= 192.10.30.1…
-
Nat Question?
Hey, Everyone! I have a question pertaining to NAT can someone explain the differences between: Inside Global, Inside Local, Outside Local, and Outside Global. I understand the Inside part.... well I think: Inside Local would be the local IP assigned to the host. Then when the packet hit's the Nat router it's translated to…
-
CCENT Practice Exams, Failed 100-105 by 31 points :(
Hi :3 i recently took the CCENT 100-105 today, and i failed only by a few points. i was wondering where i can get more practice exams, i've been looking everywhere and only found a few. But most of these practice exams are **** they want u to pay for.
-
Inter lan connection
The link below has a file of pkt version 6.2. It depicts 4 lans connected via farme relay cloud. One lan is ISP demo. it is 6.0.0.0 A class network.Other lans are private C. Only the ISP can't connect with the other lan , all the other can connect to each other. Why? router pass is 209951…
-
Cisco's CCNA Security course
So towards the beginning of this year I had it in my mind I was going to start studying for CCNA:Sec exam and ended up purchasing this course: Impletmenting Cisco Network (IINS) v3 During that time I got a job as Security Analyst and started working on other things and ended going after a couple other certifications. I…
-
First Cisco Lab Setup
Setup my first Lab consisting of- 1x1841 Router 2x3550 Switches 2xPC I have established a LAN and can ping each device from one another, but I cannot connect to WAN. My Router is directly connected to the ISP modem. When typing "sh ip route" it gives me the message Gateway of Last resort not set. I have set the default…
-
DHCP Offer VS DHCP Acknowledgment Question
At Which Phase of the DHCP process will a DHCP Server provide the client with an ip address, subnet mask, and default gatway ? Offer: Sent by a DHCP server to offer to lease to that client a specific ip address (and inform the client of it's other parameters) Acknowledgment: Sent by the DHCP server to assign the address,…
-
Need opinion of this lab equipment on Craigslist
Currently just starting the ICND2 stage. Would like to buy some lab equipment. Wondering if I'd be crazy not to snatch it up, or it is decent, or maybe it is not a great value. Probably have to drive about 30/45 min. to get it. It has been listed for about a month now. I haven't inquired yet. For $200 firm Includes all…
-
Taking ICND1 exam in about 20 min
Wish me luck. Spends countless hours/days preparing.
-
Does the Cisco exams have off the wall questions?
For example, I recently took a CCENT practice test and it asks a question about RFC 952, my "CCNA Routing and Switching Complete Study Guide" this is over 1000 pages thick doesn't even mention it. it's not in the glossary. It does list other RFC's, like 791, 1256, 1918, but not 952. DNS is mentioned on the icnd1…
-
Incorrect subnetmask/gateway, ping local vs ping remote
I've seen this a couple of times, but if the subnetmask/gateway is incorrectly configured, you can't ping a host from a remote network, but it does reply when pinging from the gateway itself. I'm trying to wrap my head around as to how the ping works when pinging directly from the gateway, vs a few hops away, where in the…
-
List of lab practice for packet tracer 7.0
Hi guys, does anyone have a current of practice lab for packet tracer 7.0. For icnd1. Thanks. I'm having difficulty finding a current one.
-
Mismatched IP addresses PPP?
Hello, I am trying to understand how the line protocol and serial 0/0 are both up when the IP address are in different subnets? what I am not understanding is how do these routers communicate with each other without using their IP addresses to find out that both sides are okay for layer 1 and layer 2? I have attached the…
-
Subnetting question time
I often find myself questioning my ability to subnet. However, when asking questions on subnettingquestions.com - Free Subnetting Questions and Answers Randomly Generated Online I have found that I can calculate and answer (correctly) within about 2 - 3 minutes per question. I just took 20 questions and got them all…
-
Route Summarization. How?
Hi, Just learning route summarization by Todd Lammle and he says that all we need is the block size. He gives a example of 192.168.16.0 - 192.168.31.0 and says the block size is 16. The only way I can think he got to this figure is by the difference which is not the exact figure.
-
CCNA Cyber Ops on ITProtv
ITProtv is offering SECFND on their site now. I missed it this afternoon, but it looks like they are airing more sessions this week. Not sure if it's worth it to watch ahead of starting the program. Will you need to rewatch it when your particular session starts thru Cisco? Does anyone know?
-
200-105 fail. Any resit advice?
My score was 801/811 so I wasn't too far off but I found the exam to be really difficult. I read the Offical Cert Guide twice, watched Kevin Wallace's videos and did a lot of labbing but there were still some questions I had to guess and I know for sure they're not in the study material I used. I also passed all the…
-
CCNA prerequisite?
Hey gang, I can't seem to locate a solid answer. The faq here seems to be outdated. Recently got my security+ cert (yay), and think ccna would help my resume. Am I able to take the ccna exam without having ccent? I'm not sure if I'm understanding how Cisco issues certs. Think I remember reading that Cisco will allow you to…
-
PC can ping router but router can't ping PC
What am I doing wrong? I'm trying to setup ftp from my PC so I can upgrade the IOS but I can't even reach the router. They're connected through a dumb netgear eight port switch. PC 1.1.1.3 255.0.0.0 1.1.1.1 RTR interface GigabitEthernet0/2 ip address 1.1.1.1 255.0.0.0 duplex full speed auto
-
Uh Oh! Taking 200-105 on 1/13
So I messed up... I didn't realize how quickly the testing center spots got filled up in January. On Monday I checked the dates and saw that the 18th was open... Perfect!. The only problem was that I had to wait for my mentor to approve the voucher, but as I type this, they still haven't approved it! Now the 13th is the…
-
Boson NetSim Question: Line password vs. Local user
In NetSim the answers always require the following configuration of having a line password configured even though login local is configured. Is there any point to this? The line password is redundant once local usernames checking is configured right?
-
What's wrong
I'm tryin to ping my computer to the router using the switch as my default gtwy. Heres my layout, what's wrong? SW1 switchport access fa0/1 - 2 vlan 10 int vlan 10 ip add 10.1.10.1 255.0.0.0 int range fa0/1 - 2 switchport mode access switchport access vlan 10 ip default-gateway 10.1.10.10 255.0.0.0 RTR1 int fa0/1 ip add…
-
Simple Document to Help with Subnetting
I'm posting this document in the hopes that it might assist those who are trying to understand subnetting in IPv4 a bit more. This document was created by a former student of mine, who grasped IP addressing and subnetting concepts very quickly. He created this document with an example in the way that he calculates the…
-
Scheduled my exam!
Feb 10th. Read through Todd Lammle's book once. Watched the entire INE series (my work has an all access pass). About the only thing I'm not 100% is VLSM, so I'm going to run through as many questions as I can. My CCNA expired back in 2015 and I plan to pursue the CCNP. Since my CCNA has expired, I need to take it again.
-
6 Weeks of Study left
Hi Guys, Booked my ICND 100-105 for the 28th Feb. I plan on going through CBT Nuggets, the Udemy Video series and then the official Press book. I have a Router and Switch at home which I am using for Labs. Would this be enough to pass you think? Cheers
-
Boson NetSim feedback (ICND2)
Hello Everyone, I am going to start back up with studying for ICND2 (took a longer break than anticipated). I have some books and a udemy course that I purchased (all updated to the 200-105 version), however i know a lot of people on here stress about the importance of labbing. I know packet tracer is out there which i…
-
IPv6 question
Hello, I was wondering if someone could explain to me the ipv6 address /# meaning. When an address says: 2000::/3 or FE80::/10 what does the /number signify. I keep reading the CCNA routing and Switch guide I have and it's not clear what this number signifies. I looked at a couple videos on Youtube and they really don't…
-
Odom's Part Review Questions (PCPT) vs. the Real thing
On a scale of "ya" to "na" without breaking your NDA, how accurate are Odom's Part Review questions compared to the real thing in regards to difficulty? I find some of the questions a little poorly worded and tricky, while others are easy and gimmies.
-
WAN Links
Hi all I've just started VLSM. Although I have figured out how to complete various networks accordingly using VLSM I'm struggling to understand why you assign 2 hosts to each WAN link? I can't find anywhere that tells you why? Maybe it's horribly simple and I'm overthinking/overlooking something
-
ODOM Books: Combined or Separate
Hello all, I'm presently taking a CCNA v3.0 course and the book they've provided is.. let's just say lacking. I've been looking at the Wendell Odom books from Cisco Press and wondered if any of you had any feedback as to purchasing both the 100-105 & 200-105 books as a set, or just the single 200-125 book. A little…
-
Importance of physical Labbing & Network Diagrams
I noticed the other day when working on some real equipment how strange it felt going from labbing a lot in PT & Boson to having to wire up real equipment. There is almost a disconnect because you have physical equipment now that isn't laid out in a neat logical diagram like in PT. Has anyone noticed a similar phenomenon…
-
Errors during EIGRP not common subnet
R1<>R2<>R3<>R1 this is configuration of R1: R1 192.168.10.5 255.255.255.252 (Serial 1/1 connected to R3) 172.16.3.1 255.255.255.252( Serial 1/0 connected to R2) 172.16.1.1 255.255.255.0 (Fast Ethernet0) router eigrp 1 network 192.168.10.4 0.0.0.3 network 172.16.0.0 no autosummary R2 192.168.10.10 255.255.255.252 (Serial…
-
Puzzling home network problem, need help!
Hello, This is an issue with a computer upstairs in my bedroom. The Modem/Router is downstairs so I am using wifi. The issue is that the wifi is very very very slow and the weird thing is, I went out and bought a 50ft cat5e and its still the same issue! Very slow internet and anything I download it seems like it stops a…
-
Do routing protocols perform differently on different sized network topoligies?
Do OSPF and EIGRP perform differently on different sized network topologies? such as convergence and packet delay. And does anyone have an information, published or academic that could support their answers? thanks
-
Passed ICND1 this afternoon with a 895/832
My question is what does Cisco mean by Intermediate vs final score. When will I receive a final score card from Cisco?
-
ICND1 and 2 question
Hi there! So I took the ICND1 back in 2011 and passed it. However, I never took the ICND2. I am wondering if I took the ICND2 now, would I still obtain the CCNA after passing it? Thanks!
-
Passed the ICND2 200-105
I just passed the 200-105. It was a pretty difficult exam. I previously passed the ICND1 version 100-101 so now I'm CCNA R&S cetified. I mainly used Odom's Cisco Press book to study. Although it was a great read, there was some material and terms in the certification that I had never heard of before. So if you're planning…
-
Right way to go?
Hello everyone. Thanks for reading in advance. One question, if anyone is willing to answer: how do you know this is YOUR work to be at? I mean, I didnt hate my CCNA classes, and understod most of them with some labs, but I hated (and still hate) the theory part. I can't fous on most of it, to be honest. I kept going the…
-
A Little ACL Help
The last ACL Thread seems to have gone, so starting a new one... Say I subnet the 150.100.10.0 network to have up to 30 hosts on each subnet, leaving room for additional subnets and choose a /27 mask... 150.100.10.0 /27 150.100.10.32 /27 150.100.10.64 /27 150.100.10.96 /27 etc... I then setup an ACL... access-list 1 permit…
-
Switch is on no shutdown but is not providing IP addresses
Hello, I have a router connected to a switch and below is my switch configuration FastEthernet 0/1 lights up and can see the router, I have setup a DHCP scope but the problem is when I connect a patch cable to the switch on for example FastEthernet 0/2 it does not light up and shows as Administratively Up but don't…
-
Inter vlan connectivity
I made a packet tracer 6.3 lan . Configured with Router on a stick and DHCp There is no connection between the vlans and also only vlan 30 got IP from the router's dhcp. Can you help?? :) Here is a config file form the router and the switch: Router:!version 12.4 no service timestamps log datetime msec no service timestamps…
-
CCNA - Committing and One Question
Decided to commit to the CCNA. I was going to go for the CISSP, but realized I've been kind of avoiding Cisco because networking - as fascinated as I am with it - is my weak point. I have two 2650 switches, and three 1841 routers. Two routers have one T1 DSU/CSU WICs One router has two T1 DSU/CSU WICs This was a kit I kind…
-
New Routers
I bought some new 2911's and when I turn them on they show some cryptic text, what should I do? '▒7▒7▒▒▒7777▒n'o7▒▒▒76▒▒▒▒{▒▒7.▒7,7▒▒▒▒''73▒▒ ▒7,▒74▒▒n'▒o1▒,▒7▒77▒▒▒7▒▒79▒o▒▒70▒7▒▒7▒1▒▒76▒▒,77▒▒7▒▒▒1,▒▒7▒▒▒3 '▒7▒▒▒'.▒7▒0▒▒7ss ▒1▒7▒'▒7▒7▒▒▒7▒'▒▒7▒▒▒74▒'▒7▒;▒▒▒▒71▒▒77.77▒▒7<74▒▒▒1'o>▒▒{▒77▒▒▒…
-
ping question
hi, I am still new to networking. Could anyone tell me why I able ping the gateway (10.0.1.1/29) and S1 (10.0.1.2/29 middle switch) from my PC but unable to ping the switch(10.0.1.3/29) where my pc(172.20.0.2) is Directly connected? thanks. *all switches are in VLAN 99 and the PC on VLAN 10.
-
ACL practices when modifying and applying new policies
Folks: I am studying for my CCNA, and I am confused at how to manage ACL lists that are already applied to an interface. For example: I have an ACL already applied to S0; however, I need to modify it. Cisco recommends that you disable the list first with the no ip access-group command; however, from my understanding, if I…
-
Best Form of Video Training?
I know there are a lot of forms of video training out there for this stuff. I already passed ICND1. I read about a quarter of the book, went through CBT nuggets for ICND1, and went through some of TrainSignal for ICND1. Of course, I labbed a bunch too. Went through CBT nuggets for ICND2. I found it to be lacking in some…
-
How do I know when I’m ready to take the CCENT?
Hello, I have never taken a Cisco exam before. For the last several months I have been studying to take the CCENT with the Cisco Press book, CBT Nuggets, and Todd Lammle's CCENT Study Guide. I have subnetting down pretty good and feel I have a good grasp on the material/concepts. I can consistently and successfully answer…
-
PPPoE concept confusion? CCNA
Hi everyone, I want to know about the IP address assignment and how that works. The book I am reading says that the subscriber gets its IP address from the aggregate router via IPCP. Now is this IP address permanent for this subscriber. Second question: It also states that the opposite side of the link's IP address is…
-
CCENT Pratice Test question confustion
If a device is assigned the IP address 9.80.86.211 /27 on an interface, the valid subnet address for the interface will be ____________ So a /24 address is 255.255.255.0, this leave you with 3 bits (27-24=3), that's 128+64+32=224. The subnet address should be 255.255.225.224, * a) 9.80.86.192 * b) 9.80.86.223 * c)…
-
CCNA 200-125 Study Plan
Howdy all fine folks, I just paid for my CCNA 200-125 exam for 2nd March '17, and now getting in the groove. I already have an MS in Computer Networks (circa '05) and loads of work experience, however, I never sat down to attempt a certification previously. In 2017, we will change this and finally make it happen. However…
-
wan frame relay
Good Day Honorable Gents Here below is a link to a pkt. Problem: There is no connction between the separte lans although I configured WAN Frame relay DLCI Help me figure out what's miising./ faulty :) https://drive.google.com/file/d/0B-wqkAUoafjDUUt5VDlUWjVDLW8/view?usp=sharing Yuval
-
Loading IOS via TFTP through a switch
Hey all, While doing some labbing i notice that i can load a fresh IOS image in rommon via TFTP/tftpdnld when directly connected from server to router, but i timeout when going through a switch and i can't figure out why? This is in Packet Tracer 7.0
-
My CCENT Notes
Hey, i am going to post some of my notes to see if it helps some of you guys. OSI and TCP (DOD) Model 7) Application layer- Interface between actual application. User needs access to network resource. This layer makes sure that the necessary resource exists between nodes and authentication occurs here. Protocols: (DNS,…
-
What WAN technologies are used today?
When I search for "current WAN technologies" and similar all I find is ancient articles like this one: https://technet.microsoft.com/en-us/library/bb962087.aspx The most useful info I could gather this far is that Frame Relay is no longer used (kinda?). So... what WAN tech DO we use these days? The same goes for wikipedia,…
-
Exam question tactics
Working through the Odom PCPT Chapter Review questions make me realise how many different options and ways they can test your knowledge exist. I've found that if I focus purely on the Question text and then refer to the answers later, I'm prone to sometimes picking an answer too early or just spending too much time working…
-
100-105 / 200-105
does anyone know if they use recycled questions from 200-101, and 100-101? I have a ton of study material and practice exams for the older CCNA but I don't want to buy new study material.
-
show run | section
If the | section option is not available and the only options are: append Append redirected output to URL (URLs supporting append operation only) begin Begin with the line that matches exclude Exclude lines that match include Include lines that match redirect Redirect output to URL tee Copy output to URL Is there a regex…
-
Cisco IOS DHCP Server Address Reclaim
The DHCP Server Leases an address for a (Usually a number of days) and then the client can ask to renew the lease. If the client does not renew the Server can reclaim the ip address and put it back in the pool. So my Question is what if a network admin goes to the End Device Host, and Statically configure an Ip address…
-
ASA in GNS3?
Hello everyone, Has anyone successfully got an ASA to work in GNS3? I spent the entire night but ASA8.4 just keep crashing for me when i run certain commands.
-
Boson Netsim
I have just installed Boson Netsim, i want to get some help in using it. first i made the network topolgy then opened other window for configuring devices, but whatever command i enter it says incomplete command, whats the reason for this ? i am using demo version.. is this the reason ? do i have to buy the activation key…
-
Voice vlan+vtp+dhcp cisco packet tracer
Hello!I need your help to solve my problem with cisco lab.I config dhcp pool pc didn t get ip address automatically. When i write command in the switch sho me message vtp mistmached, https://drive.google.com/file/d/0B8n92lXZp7EtdG1ncXBvTHM3NmM/view?usp=sharing I forget say password winrar 4444
-
A great introduction to the Cisco product range for novices
https://www.youtube.com/watch?v=Uwq3sf4kZQQ (This is video 1, the rest are listed under the uploaders YouTube page) This is a 27 part training series intended for Cisco Sales/Marketing staff which is a broad overview of some of the technical aspects and sales aspects of the entire Cisco product range. I think this is a…
-
Dell products suitable for CCNA and beyond.
As a contractor for Dell and I have access to any certifications available for me to take. I have been thinking of going for my CCNA (again) and would like to know, which Dell networking product would be beneficial for me to learn and be certified? I have come across PowerEdge but I think that's for server.
-
CIDR Range
I am coming confused about the possible range of CIDR masks. I would assume any value between /9 and /27 would be valid but I have seen some sources say /13 and /27. What is the correct answer. Thanks.