-
Recieving Certs fro Cisco
I hope this isn't a dumb question but anyhow here goes... Do I receive an exam cert for every Cisco exam I take for my CCSP? I have received my CCNA cert through the post. Then after completing SNPA, I never received a cert? Then later when I did my SND exam I received my Cisco Firewall Specialist Cert and Cisco…
-
cpy tftp flash , after copy still have the all version
Probably I am doing something wrong. I just got an ASA 5510 with the V7.07, I want to upgrade to the version 7.2 I type copy tftp flash File asa721-k8.bin The firewall begins to copy the file and writing to the disk but in any moment there is not installation and the system said that the files were just copied. I reboot…
-
Cisco 2600 series router prob
Just got this router out the box and for some reason i cannot ping my own interfaces on devices connected to it. I think it might be a hardware problem but...every interface? I wanted to upgrade the ios but my e0/0 port is up but line protocol is down. so is all the others. Any suggestions?
-
Quick question..Default Vlan
I want to make sure I have this correct. CDP, VTP, PagP all multicast over a trunk link on the default vlan right? By default, on catalyst switches, the default VLAN is VLAN1. The book is telling me that the default vlan is configurable, but I thought I have read other places that it was not. So if this default VLAN is…
-
sims on CCSP tests
Are the CCSP tests pretty much the same as the CCNA tests in regards to sims? If so, I am assuming it is fair game between command line and ASDM, PDM, SDM etc.....?
-
Access list config question
Hey techies, have a look at this for me, will ya? logging trap warnings logging 10.22.128.100 access-list 10 permit 10.22.151.99 access-list 10 remark *** HTTP Permissions *** access-list 10 permit 10.22.129.0 0.0.0.255 access-list 10 permit 10.22.216.0 0.0.7.255 access-list 10 permit 10.22.160.0 0.0.0.255 access-list 10…
-
2691???? router to add to my lab
is this a good deal for £200/$400, it's got 2 x ADSL interfaces with it which are worth some money, never bought a 2691 before anything i need to worry about. Cisco IOS Software, 2600 Software (C2691-ADVENTERPRISEK9_SNA-M), Version 12.4(17), RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport…
-
baseline
hey got a pair of 5520's in A/S. This site is not yet in production but I want to caputre a baseline of traffic, memory useage, etc. any good idea's on how to accomplish this? right now the plan is to document weekly or monthly averages of connections per second cpu utilization memory utlization
-
Requirements for CCNP
I was just wondering how many exams are involved to become a ccnp. Do they have options of a single test or multiple tests to achieve the cert like ccna? Thanks in advance.
-
OSPF without authentication !!!
Hi all ..... guys how risky it is to have OSPF without authentication ? I have seen so far around 4 private networks none use authentication for ospf. Is itn't this too risky ? Can you please tell also if in your network you are using authintication for ospf( or eigrp, Rip V2) .
-
Used Books
Can anyone tell me the best place to look for used Cisco Book. I'm looking for the Books for the CCNP: 1. Building Scalable Cisco Internetworks (BSCI) (Authorized Self-Study Guide), Third Ed. 2. Building Cisco Multilayer Switched Networks (BCMSN) (Authorized Self-Study Guide), Fourth Ed. 3. CCNP ISCW Official Exam…
-
ssh keys
Is it possible to generate other key types besides RSA? This is for use with ssh.
-
ccna 2 ccvp
is it possible to sit for CVOICE if ccna is expired? i've browsed cisco site and this is what they said CCNA Recertificaton =============== CCNA certifications are valid for three years. To recertify, either pass the current CCNA exam, or pass the ICND2 exam, or pass any>>>> 642 professional level <<<<or Cisco Specialist…
-
Decisions
I know this is really up to me, but I could use some advice. Ok just got my CCNA, and now trying to decide what to do next. I work as a security admin and have been doing security for about 2 years. I have almost 8 total years of professional experience in everything from administration, to coding and now security. SO,…
-
IPv6 Question
Does anyone know if there is an IOS image (yet) for the 2600 series routers that will support OSPFv3? I don't think so but could be wrong.
-
quick EIGRP question
So everyone knows that to be a feasible successor a routers Advertised Distance must be less than the successors feasible distance right? so what if a router has an AD that is exactly the same as the successors FD. Does that make it a feasible successor or does it have to be less? thanks
-
VTP version & Transparent mode
Hello, According to the CiscoPress BCMSN exam cert. guide 4th edition, page 147.. Switch in transparent mode running VTP version 2 is not checking for domain name match before forwarding VTP advertisements. I have played with this in the lab and it seems that he doesnt forward advertisements with different domain name as…
-
Order of operations!
Hi Forum, I've just joined this forum as I am just about to set out on the CCVP journey. I am totally learning from the bottom up, since I have very little knowledge of voice. Can anyone recommend the best order to study and take the exams? Is it as per the list on the Cisco website, or is there a better way? TIA
-
multicasting in BCMSN?
Hello, I'm reading the BCMSN Authorized Self-study Guide (4th edition) now, and Chapter 11 (page 500-551) is named "Deploying Multicast in the Multilayer Switched Network". But in the BCMSN Official Exam Certification guide (4th edition) I can not immediately find a chapter about multicasting. On the career path of BCMSN…
-
BGP+MPLS Booked **UPDATE PASSED **
Well I have finally gone and done it combined MPLS+BGP booked for Thursday, so revision between now and then. I hope Im not trying to take to much on here, my BGP notes are about 30 pages in contrast to my MPLS notes which are 80 pages Any last minute tips? (mike, Edd, Darby!) One thing that has worried me is a friend…
-
passed CVOICE
Hi All, I just passed CVOICE today. Thanks for this forum and all of you who has given me a guide to study. I will pursue CIPT for the next exam What's the difference between CMBA (Call Manager Basic Administration) and CIPT Is there a certification for CMBA ? Can I find a job after getting a CCVP ? Thanks
-
trainsignal and boson
anybody here used the trainsignal bsci material to pass the bsci 642-901 exam? it looks like some good material, however for 200 bucks that seems kinda high. i do have two 25xx routers and a 1900 switch and was thinking about buying some more routers and switches. however i ran across the boson netsim and have to say it…
-
BSCI {Study Materials}
Hello, can any tell me if this book recommnded for the BSCI Test. CCNP BSCI Exam Certification Guide: CCNP Self-Study, Exam Certification Guide Ser. Author: Clare Gough Edition: 3 Publisher: Cisco Systems Category: Computers & Internet ISBN-10: 1587200856 Networking Format: Hardcover Publication Year: 2003 Thanks
-
Summarization doubt...
Hi all ladies and gentlemens... i'm in the middle refreshing my route summarization knwoledge. i found something is funny... can someone explain to me. WHY the following subnet cannot be summarize into 1 summary? _______This is what i got from cisco website - for discussion purpose only_______ Consider this set of networks…
-
CVoice Lab
I currently have 3- IAD2431 routers with 8fxs ports and 1 on board T1/E1 interface each, and 2VWIC cards, borrowed from work of course , and was curious if these are enough for a home lab to practice for the Cvoice test? I also have a few single line phones to use on the FXS ports.
-
642-552 Exam Simulation
I am studing with the book Network Security Fundamentals. I need to find the exam simulation for this exam (642-552) What do you considered a good exam simulation? I only found one in www.transcender.com for $159.00 Raul
-
CCVP Study plan
I was just wondering if i study, say 3 hours a day, 6 days per week - self study, will i be able to sit for one subject of CCVP in 2 months? with 18 hours study per week and finish CCVP in 10 months? Any better way to finish it even with lesser time?
-
Issue trying to telnet into home routers
So I cannot seem to be able to telnet into my home router. My set up is DSL modem to Linksys WRT54G router to Cisco 2611, and a couple computers Now the internal computers can telnet into the router via the private address, as well as the external IP address on the linksys. However, I do not get a response when trying to…
-
Sample lab topology/configurations
Hi, I'm studying for the CCNP(currently BSCI). I have the exam certification books, and running dynamips for my lab. I'm trying to master EIGRP/OSPF now before moving onto IS-IS, multicast, IPv6, etc. Does anyone have a good lab setup/config that is handy for studying these topics? I have a X2 5200+ with 2GB of ram and can…
-
DHCP routers
Hey everybody, When would a router be preferred over a server to assign IP address( DHCP).
-
best IOS versions for BSCI lab use? 25xx,26xx,3620,3640?
Hi guys subject says it all. Having trouble selecting correct image for 2500's especially. another thread says c2500-is-l.122-15.T15.bin I believe for OSPFv3. I have been using cisco feature IOS navigator but still have trouble finding the perfect fit for 2500's. Maybe there is not a single image that is clearly the best…
-
CBT Question
Hi, I have a colleague who is considering purchasing the CBT Nuggets training for the CCNP for his company so that a couple of his people can work on their CCNPs. He was asking me if I knew how good they were in addition to Cisco Press or for that matter how do they stand up on their own? I have used some of their stuff as…
-
SNRS material
Hi everybody, I'm preparing for the SNRS exam. can anybody provide me with the exam material? the old one that has been used for 642-502 will not work since they recently changed the exam. thanx Riyad
-
Does Dynamips support Cisco Switches
Please can someone help me in guiding how to do Switching Labs of CCNP in Dynamips? Is there any software like dynamips which can provide switching exercises? It is urgent, if someone can help me.
-
642-901
ok, i don't know why i am having trouble finding this. does anyone know what the passing score for the bsci exam is? thanks
-
Serious question. Is it OK to stack routers on each other?
I ran out of room on my 44u telco rack and really don't want to fit another in my room. Is it ok to place 2500 series routers on top of each other? will they have enough airflow? 2500's have air outtake on bottom and intake on sides, this is what concerns me. my other routers are 26xx 36xx and have front intake and rear…
-
VPN vs MPLS
Im working on a project for a company that have 15 MPLS links, they dont have an IT department. Im new on MPLS, in my opinion it's the like a frame relay link(somehow). What advantages and disadvantages have MPLS vs traditional VPN ip sec(GRE) links. Cost saving?, Faster?, more reliable?.
-
ccvp free simulator
can any body tell me a link to get free ccvp simulator? can i manage ccvp by self studying.
-
CCNA expiring....
Hi guys.. My CCNA is going to expired on Aug 2008. so, from now onward, i left about months.... i was thinking, to your guys, is it enough for your guys to self study and pass 4 CCNP papers? another questions is : If i got my BSCI and BSMSN before aug 2008, but not yet ISCW and ONT. but then my CCNA expired. so, will my…
-
Cisco IOS Security Specialist
I just noticed the Cisco IOS Security Specialist -- and I don't have it. I did take SND to get the Cisco Information Security Specialist. If I take the SNRS exam that would give me this one. The thing I've always wondered about - why do you almost always get something from Cisco when you take a CCSP exam (if you do it in…
-
searchin for a free ccvp qos ebook?
can any body tell me a way to find free ccvp qos ebook?
-
What do you plan to do with your CCNP?
For those pursuing the certification, what do you plan to do with your CCNP? For those who already have the CCNP, what are you doing with it? Just curious. :D
-
UDP/RTP voice data using a default route
Will UDP/RTP voice traffic use a default route or must it be defined in the a route table on a 3560 switch? I had a problem in which I could connect (call) to someone else's 7970 phone, establish a connection but he could not hear me. Thought it was some kind of a VPN issue with my watchguard edge device but it turned out…
-
Dynamips problem
Anyone had problems getting Dynamips to work when VMware is installed but not running? I start the server and then simple script 1 but get the following error: Reading configuration file...Warning: Starting R1 with no idle-pc value*** Error: unable to start VM instance 'R1'See dynamips output for more info.Press ENTER to…
-
Query...MTU size of physical int vs tunnel int
Hi Guys, My first post in the CCNP forum and I'm not sure if here is the right place for the query, but nonetheless... I have a GRE tunnel configure between 2 x 2801 routers, running over a MetroE link... The MTU size on the physical interface F0/0 is 1500 bytes and the MTU size on the Tunnel interface is 1476 bytes... My…
-
Alternate Way To Study CCNP?
Hi guys, I have seen most of the poeple opt for self-study for CCNP,i am just wandering whether anyone over here tried online training? There is no reviews for any good cisco online training especially for ccnp. So just want to get some ideas from you guys? any good online training out there. I have been browsing for a…
-
IGMP Snooping, Layer 3 or not.
I have read conflicting things regarding IGMP snooping. Some books say that only layer 3 switches can use IGMP snooping, others say that it can run on a normal layer 2 switch..... so whats the correct statement?
-
Colleges offer CCNP/CCSP courses in VA, DC
Does any know any colleges offering good trainning programs in CCNP/CCSP around Virginia and DC area? Ideally, the whole program should last around 6-10 months. Many thanks.
-
Passed 642-845
Yea passed 642-845 did really well for once. I am so happy no more studying till next year now :D
-
Etherchannel use
Hey guys, Just a quick question for those who work with production networks. In a switched network with multiple redundant links between switches, due you create an etherchannel(s) with these links or just leave them as invidual links? I can't see why you wouldn't utilize an etherchannel, because there combined use…
-
What is dynamips?
Hi there, What is exactly dynamips? Is it like a Router Simulator? (Boson for example?) Please share your experience and knowledge of dynamips. Thanks a lot.
-
MCTS: SQL Server 2005 or CCNP
I passed my CCNA a few weeks ago, and am now starting to work on the MS 70-431 exam for SQL Server 2005. It's only one exam, and then it will certify me in SQL, which is in huge demand, and will broaden my skills and will be useful at my current employment. One exam, so maybe worth doing ASAP before SQL 2008 is released??…
-
Cisco Pix 515E restricted license
I have a question, I read but I can not find the answer. In the Pix 515R Restricted license, how many VPN can I get? I am not familiar with this model. Thanks. Rau
-
Does 12.0(7)XE1 Support SSH?
As the topic states. cant seem to find a feature list. Cheers,
-
NAT problem with port forwarding
I can't get this bittorrent protocol to forward for some reason. These are my current NAT statements. ip nat inside source list 1 interface FastEthernet0/1 overload ip nat inside source static tcp 192.168.10.1 26866 71.x.x.x 26866 extendable ip nat outside source static tcp 72.x.x.x 26866 192.168.10.1 26866 extendable Fa…
-
Books for CCNP Exam Preparation
For those already CCNP certified, which book series is best for Preperation for the exams? I found Sybex to be pretty thorough in CCNA but they don't have a CCNP series.
-
Someone please ANSWER! Can't be that hard.
Hey whatsup guys, my co-worker and I are debating on how to setup the physical frame-relay connection for a new lab. Using 4 routers. 3 outer laying routers and 1 in the middle as FR switch. We have 4 routers each with a T1 interface card. Now we need to know whether we could simulate a frame relay connection between 3…
-
Frame Relay Help
The equipment I'm using is 2 2610XM's and 2 1760's running 12.4 Id like one 2610 to act as the hub with the others connecting to it. Don't know if it'd be best to use T1 interface cards or WIC-1T cards with an NM-8A/S card in the middle router. Whatever works best is what I'm trying to find out, and see what's best for my…
-
Frame Relay Physical Connection
Hey whatsup guys, my co-worker and I are debating on how to setup the physical frame-relay connection for a new lab. Using 4 routers. 3 outer laying routers and 1 in the middle as FR switch. We have 4 routers each with a T1 interface card. Now we need to know whether we could simulate a frame relay connection between 3…
-
Repost from OffTopic: 3rd Party Cisco IPS Monitoring
Non exam stuff is meant to go in OT I know, and that's where this was originally posted, not a peep though so I'm hoping someone here might have an idea. I know you can use the CLI monitor and ASDM to monitor IPS events but neither is that great imho. Are there any good 3rd party monitor/viewers you guys use and can…
-
PDM does not support Policy nat?
I have had to build a vpn on a pix 6.34 using policy nat, however this has now made the pdm pratically unusable, is there a way to do this without disabling the pdm?
-
A Question from a PIX noobie
I have a high level 6509 switch connected to a pix and clients that sit behind the PIX, the ACL's on the switch allow for traffic back to the source as tcp "established" but PIX doesnt allow established much to my surprise. So how in chuffs name do we check for the ACK bit in our return packets? And, would there be any…
-
Got the BSCI wednesday 14th, tips? Failed, big time
got the BSCI exam on wednesday I've read though the book and made 200pages of notes been reading them plus doing some pratice tests and working on summarization today. haven't done as much lab stuff as I would have liked. I know it's a 90 minute exam, how generous is the time they give you, because I found myself running…
-
Redistrubution
Hey Team, Just reading over the redistrubution topic and I'm wondering if corporations really use redistrubution? I could understand static and default routes, but do coporations really use multiple routing protocols?
-
SIP/MGCP which layer
Hi, 1. I am confused about SIP/MGCP located on which layer. some source said It is located on layer 7, some says on layer 5 (session layer). 2. Do we use OSI model for Voip or TCP/IP or doesn't matter ? Is the OSI model only logical or It "really exist" ? 3. Serial interface is located at which interface ? When I studied…
-
lab home CCNP
Hello, I 'm do a CCNA and after I go to CCNP, and I want to buy my home lab: For CCNA 1 x 3550-48 2 x 2950-24 1 x 3640 128d/32f 2 x 2610 64d/16f After for CCNP, i want buy this material: 1x 3550 2x 3640 2x 3620 1x 2600XM My question, what,s differents modules I need? What's differents IOS, I need? For 2600XM series, What's…
-
CRD database eceeds limit is ART affected?
If the size of the CDR database exceeds the limits, what happens for the performance of ART ?
-
ethereal count of g711 call using 20ms
I am looking at the RTP packet captured in ethreal. I see total size of 214 bytes ethereal+ip+udp+rtp+payload I am assuming 40 + 160(20ms of g711).. but why is ethreal equaling out to 14 bytes? is it possible to not include CRC(4 bytes) in ethreal in this case?? can someone explain ?
-
BSCI Passed !
Hello, I have passed BSCI 642-901 today with 989 points For those still studing just one advice: Don't underestimate multicast. STUDY MATERIALS: CiscoPress CCNP certification library. Contained BSCI 642-901 exam certification guide is quite good except multicast configuration & troubleshooting. Better choice would be…
-
isis configuration
what's the difference in use between these two command sets? if I have a level 1-2 router? config t router isis is-type level-1-2 and config t int s0/0 isis curcuit-type level-2 int f0/0 isis curcuit-type level-1
-
Need help with OSPF virtual Links
I just don't understand this... From the ciscopress book: "The OSPF virutal link feature should be used only in very specific cases, for temporary connections or backup after a failure." "In the example, area 0 is discontiguous because of network failure. Router A builds a virtual link to router B, and vica versa." BUT,…
-
Suggestion for MPLS BGP Exam
Hi Guys I need suggestion regarding the last two exams for my CCIP i.e BGP and MPLS So if you guys can suggest me wether to go for the combined exam or the seaprate exam as after these two my next target is ccie(R&S or may be SP), so waiting for your suggestions fellas Regards
-
How Hard is the 642-901 BSCI?
Just out of curiosity - How hard is the 642-901 compared to the 640-801?
-
*TechSims* BSCI
Here's the first TechSim for the CCNP BSCI exam using our online router simulator: Configuring IS-IS Johan :D
-
dhcp configuration between two routers
got this config on a router I want to act as a dhcp server for the router on the other side of the serial link. First of all is this config OK? second, when I use the ' ip address dhcp' on the dhcp client serial interface it isn't a recognised command? dhcp-server#show run Building configuration... Current configuration :…
-
Cisco Secure Access Control Server 90 Day for Win 2003
Hello, Does anyone know where I can get a copy of the evaluation trial of this? I can't seem to download it from their website. Thanks, Jared
-
More info about CCVP plz
thank u 4 replyin' guys ccvp course is new in my country the course will be ( 4 hours / day ) (6 days / week) only one day off and i think it's too hard , how will i study? i wanna know the no# of hours that required to finish the course and the ccvp materials isn't avalible here , where can i find the study materials i…
-
About the BCMSN...IOS only or CatOS too?
CatOS and IOS or IOS only? Thanks!
-
voip static on line
Dont know if posting on the right section. I have a cust that is complaining about static on the line when making or receiving phohe calls. its a multilink ckt and mult and all sequences are up and stable. Not taking any errors and not dropping packets. I am able to send extended pings to cust ip fine. I looked at the…
-
Dynamips and SDM
I have my virtual lab plugged into my loopback. I have the HTTP server running on the directly connected virtual router. I have set a username/password and privilege level 15. Now...when I go to actually install SDM to the router it requires 8900k, when I only have 8192k. I have tried multiple IOS images and run into the…
-
something strange going on with my BGP config here.
having some strange issues with the routers in AS5100, as shown in the diagram. Dotted lines indicate a neighbor adjacency. so i have added the 33.33.33.0/24 network to R3 and the 22.22.22.0/24 network to R2. R1 is configured as a route reflector, the problem is that somehow R3 is picking up the network 22.22.22.0/24 with…
-
need help with IPSec
i am setting up a ipsec tunnel using a 2003 server as the ca this is the dubug i get, any ideas what the problem could be/what i ned to change? i know the clocks are set ok so its not that. Nov 7 17:06:49.830: ISAKMP 0:44:SW:1): processing CERT payload. message ID = 0 Nov 7 17:06:49.830: ISAKMP0:44:SW:1): processing a…
-
I Need Information About The Exam 642-544 Mars, 642-544 MARS
Dear all I want from any one pass on exam MARS 642-544 to help me to know Questions about Simulator Lab comes in it and any information about the Exam Thanks for your advice!
-
BGP multihoming issues
Lets say I have an HQ router which connects to 2 different ISPs. I want to dual-home with special circumstances in mind. Lets say I only want to use my ISP2 in order to connect to one specific network maybe a corporate partner's network (9.9.9.0 /24 for example). But if my connection to ISP1 were to go down, I want to know…
-
IPv6 interface identifier???? EUI-64
IPv6 interface identifier ok so here's the example in the book MAC 00-11-2F-1D-1B-48 make the EUI-64 00-11-2F-FF-FE-1D-1B-48 and with the 7th bit of the first byte binary 1 making 02-11-2F-FF-FE-1D-1B-48 Here's my question, does the fact that there is a binary 1 in the 7th (U/L) bit tell us that the address is globally…
-
Question to the experts? Is this is a good practice or not?
Hi all ..... I have notice something in company's network: we have applied cisco hierarchical Model. All switches in access Layer are working as L2. All switches in distribution layer are working as L3(doing routings), All of the are 6500 series. 2 switches in the core layer but here is the ISSUE ----> One switch is…
-
next-hop-self command issues.
I have the network shown below configured in dynampis. Routers 1 2 3 are in AS 5100. the dotted lines show the iBGP neighbor relationships. There is an eBGP relationship between router 3 and 6. Router 6 is advertising the 66.66.66.0 /24 network, here is the BGP config: router bgp 5600 no synchronization bgp…
-
Composite Exam 642-892
Does anybody know if the composite exam is limited to those already certified CCNP and CCDP? from: http://www.cisco.com/web/learning/le3/current_exams/642-892.html The Composite exam (642-892) is the quickest way for currently certified Cisco Certified Network Professionals (CCNP®) and Cisco Certified Design Professionals…
-
Feasible Successor
To the Cisco experts....I'm trying to figure out the concepts of feasible distance, feasible successors in the metric calculation of EIGRP. I think I've figured out calculating the metric part out of the way, but not so sure about the selection of feasible successors. Supposed I had on Router 1, I have two routes to…
-
What's the best simulator for a CCVP?
I'm shortly going to be in a position where I won't have access to any equipment other than two computers, two routers, and two 2950 switches, which clearly isn't enough to work on a CCVP. I'm also just beginning work on this cert. Which would be the best online simulator for this? I'm not looking for the Cadillac of sims,…
-
A Real NAT in the butt >.<
Well I figured I would turn to good owe techexams.net for some ideals because I'm totally fresh out. I am doing a contract for a small business and currently installing "cheep" cisco equipment per say to fit their budget so im using a cisco 2610 with a wic-1adsl, cisco 3524XL (non poe). I am currently using the ios…
-
PIM configuration RP
when using the command ip pim rp-address (addreess) to config a router as a RP, what address should be specified, is it an interface on the router or a loopback on the router or neither? cheers
-
Cvoice exam voucher
Hi All, I want to take a CVOICE test. Anybody know where to buy a voucher so I can get a cheaper price ? Please suggest. Thanks
-
ISCW question
Hello everyone, As with the similarity between QOS and ONT, is there a similar pair that matches with the ISCW? If there is, might as well study for that test and take them both together the way I am preparing for QOS and ONT together.
-
Rapid Spanning tree
My 2950 does not have the option to enable rapid spanning tree. I think Jeremy used a 2950 in his example on the cbt's i watched. My IOS version is 12.1 do i need an upgrade to enable rpvst ? or did i hear jeremy wrong?
-
642-901 FAILED (Update: PASSED!)
I tried the exam today and I failed with a score of 777 I made a lot of stupid mistakes, combined with BGP and IPv6 not fully understood. I'll try again in 10-14 days. The failure is my fault only, but I think the Official Exam Cert Guide covers many things inadequately: any suggestion on alternative study guides or…
-
CCNP exams passing marks
What are the passing marks for BCSI,BCSMN or the composite ISCW and ONT?
-
Best laptop for cisco lab/tech + opinions on screen ratio
Hi, What laptop would you guys get for CCNP for using simulation software like dynamips. To run 10-12 routers needs a duel core with at least 1 gig ram right? I have a nice lab at work and home but I would like to try dynamips as I have heard lots of good things Also. I have grown to hate 16:9 screens on laptops. I have a…
-
Creating vlans at the core layer ?
Hi guys ..... What are the pros and cons of creating VLans at the core layer?? Keeping the in the distro layer isn't just better ?
-
Did BCMSN seem harder than BSCI?
Hi eveyrone, Not sure where I saw it, but I think it was here, that some people thought that the BCMSN was easier than the BSCI. I don't know about you, but from doing the BCMSN studies, I am like "WOW!" on some of the BCMSN topics. I found the BSCI to be quite a lot easier to understand, especially with acronyms. There…