-
CCNP syllabus
Hi, Is it true that the CCNP syllabus is going to be changed this November? I heard it from a co-worker this morning.
-
BCSI and Help key
I am getting ready to take my first CCNP test,the BCSI and I have a couple of questions for those who have taken it 1.Can I use the ? key on the Sims 2. Do you still have to type out the complete command,i.e, instead of conf t you have to type configuration T Thanks
-
What version of CCM do you run?
I'm wondering what is the most popular version out there? I've worked on 4.1 and now have 5.1 at work, and installing 6.1 on vmware. Has anybody had a play with 7.0 yet?
-
DTMF-relay on IOS version 12.3(26)
To the Moderator: Please allow me to post here, because i dont know where to put this. Hi, I'm having dtmf problem on my AS5350 gateway. Previously im using version 12.3(3i) and wasn't able to make dtmf calls, i check Cisco Software Advisor and the feature is not there so i upgraded to IOS version 12.3(26) but…
-
TUC exam Tommorrow- If I pass --->CCVP
Hi, Tomorrow I am having the TUC exam. The last exam before becoming CCVP :) Hope I pass it regards, ALICIC
-
Which book to believe on OSPF ID?
The self study guide says the following; [Alternatively, if the router-id ip-address OSPF router configuration command is used, it will override the use of the address of a physical or loopback interface as the router ID. Using the router-id command is the preferred procedure for setting the router ID.] The exam guide says…
-
Photography in testing centers
Hi, I read that some testing centers are taking a photography when you sign in. This didnt occur to me a week ago. Anyone else tested recently that didnt have their photo taken either, and is this required for the exam to be "valid"?
-
WARNING The switch is not usable.
I have just got my hands on a 3550 switch through work.. When I try to boot it just loops and I noticed the output contains the message... !!! WARNING: The switch is not usable !!! Reason: Error while testing CPU Interface channel 0 on switch core 0. Bad class type field, expected 0x18, actual 0x00 Unexpected exception to…
-
ONT - bandwidth remaining percent
A question from the ONT Official Exam Cert Guide... Examine the output shown:!policy-map AutoQoS-Policy class AutoQoS-Voice priority percent 20 set dscp ef class AutoQoS-Signaling bandwidth remaining percent 5 set dscp cs3 class AutoQoS-Transactional bandwidth remaining percent 40 random-detect dscp-based set dscp af21…
-
can you have CBTnuggets on a vido ipod
hey guys I was wondering if it was possible to have something like CBT nuggets playing on an ipod, anyone done it? was format do CBT nuggets come on
-
Home Lab VoIP on the CHEAP...?
Hi Guys, I'm new to VoIP and want to integrate a bit of VoIP into my home lab so I can start to learn about it. I haven't got much more money to spend on my lab so I was hoping I would at least be able to get some sort of VoIP services going, even if just on the LAN initially (I don't have an FXO interface as yet, and I…
-
Feasible successor
Hi, is there a difference between a feasible route and a feasible successor? I found both expressions in Cisco's Exam Guide.
-
Passed ISCW
I got a 950 but damn it was hard, just as hard as BSCI. There is a lot of new technology that I had to learn but I am glad I got it over with. All is left is ONT which I have been studying over the summer along with ISCW. Once I get my reimbursement back from the VA I will schedule it. They also took my picture and is…
-
Guest Access and download switch software
Hi, I read somewhere on these forums that you are allowed to download switch IOS software from Cisco with just a guest login, is that correct?
-
ip bandwidth-percent eigrp
Hi, I read that the ip bandwidth-percent eigrp [as] [percent] command should be issued on point-to-point interfaces to limit the amount of EIGRP traffic. So the bandwidth command will only be used for route metric calculations?
-
BCMSN Down
Hardest one for me, but, by far, the most useful for my working environment. What killed me was Voice and Wireless. Not having the gear made it tough to really nail those concepts. I had an 875, which, as always, disappoints me a bit, but life will go on. Here was my breakdown: Implement VLANs 100%Conduct the operation of…
-
Frame-relay Switches.. In series
Ok i know how to configures a cisco router as a frame-relay switch. ex: frame-relay router 102 interface s0 201 but the problem is my frame-relay switch has only a limitied amount of ports. how would i configure a second frame relay switch to work in series with my first switch. for example. R1 (102)FR1 (s0)(s0) FR2…
-
Upgrading CUCM 6.1
I am upgrading a publisher and a subscriber to 6.1.2 does anyone know, will I need to run the upgrades at the same time to avoid any incompatible image issues? Has anyone done this? Thanks
-
Why use Management IP's?
Hey folks. Im just curious to know why people use management IP's if there is only 1 switch involved. Why not just use the IP address from a client vlan to remote in? Thanks!
-
QoS exam
So I am thinking of taking this exam shortly, and was wondering what people who have taken it thought's were on it. Is it much of a leap from ONT? Looking over the objectives (Cisco's new site is kind of neat), it doesn't look too hard. Most of it I think I could do off the top of my head from CCIE studies, but I am…
-
Calling all ASA engineers
Hey ASA engineers; we have this new ASA 5510 and we are virtualizing the firewalls; i think it is calle multiple contexts and well we have this: 1. Internet vm firewall 2. Private vm firewall 3. Admin vm Firewall and appaarently our CCNP engineer says Cisco has issues allowing VPNS for any of these vm firewalls is this…
-
any reason I shouldn't do the old exams?
I have loads of experience with the PIX/FWSM/VPN Concentrator/older IPS products but none with the ASA and newer IPS products. My employer also has the CBT Nuggets videos for SND, HIPS, etc. Any reason why I shouldn't try to pass the SND (642-552) and HIPS (642-513) before they expire on November 17th? Thanks!
-
CCNA voice lab help
-
Can't register 7940 to UCM 6.1
So I have my LAB setup. I have a 1760 - HQ and 2 MC3810's - remotes I configured a third MC3810 as a frame switch and used to the following to get the frame up and running: http://www.techexams.net/techlabs/ccna/lab_fr.shtml I am running eigrp and am ble to ping all interfaces and accross the WAN to the CM. If I put an IP…
-
Dynamips - Ghostios and Sparsemem
Hi, Ive searched the forums along with googled my way through documentation, but with no dice on this problem with dynamips. After reading that people use the Ghostios and Sparsemem configuration commands with Dynamips/Dynagen to improve performance, I have tried them out, but with poor results. In almost all the labs I…
-
I got my CCNP in the mail the other day
yep it finally came! what a great feeling!
-
CCNA:S + SNRS lab...
Within the next 6 months I'm hoping to do CCNA:S and SNRS, and then in 6 more months do ASA Fundamentals and ASA Advanced. My question is...Do you guys like the 3640 128/32 (max) for CCNA:S and SNRS? It runs IOS IPS, runs SDM. I don't see any difficulties in setting up a lab with a pair of 3640's and an ASA 5510. Can…
-
Does anyone here uses any other voice products?
I am comfortable with working with callmanager 4.X and CCME. But I want to learn other voice products. I was doing some research and came across Asterisk which is open source. Does anyone here have experience with Asterisks? And can they help someone like me who has no experience with it whats so ever get it up and…
-
CCNP BOOKS
What are recommended books for the four parts of CCNP? Please assist.
-
RIP links and fault tolerance with a kicker
I have read Cisco document ID: 70559 “ASA/PIX 7.x: Redundant or Backup ISP Links”, and I was able to implement this on my home lab, but this was with Static routes. I am going to use RIPv2 on my next setup, but I have some different variables. T1 x2 x1 ASA 5005 x1 Router 2600 x1 Can I keep both T1 links active, and create…
-
BSCI
I took BSCI today and I didnt pass. I Received 744, passing is 790. It was my first attempt at it. I did worst on EIGRP and BGP. Sims were cake. I used CBT nuggets, cisco press exam cert guide, and Transcender. I feel that if I re-read the cisco press chapters and re-watch the nuggets, I will pass on the next attempt. I'll…
-
BSCI schedule 20th september ***PASS***
so my first step toward the hill .....starts tommorow.......feeling nervous but confident of knocking it down .....study material used by me 1.) cisco press book BSCI fourth edition 2) cbt nuggetts videos 3.)GNS3 ....for labs ...have made my own labs for book scenerios and cbt .....to understand it practically. 4.)cisco…
-
freeware bandwidth monitor
does anyone know of a piece of freeware that will monitor/record bandwidth usage on a windows nic?
-
Quick traceroute question
Hi, when you have a traceroute saying something like: 1 192.168.100.3 104 msec 192.168.12.1 244 msec 192.168.100.3 88 msec 2 192.168.100.113 104 msec 192.168.12.111 244 msec 192.168.100.113 88 msec (dont give the IP's any meaning, its just for an example). How should one read each individual line (cisco's "understanding…
-
Is it bug on NBAR
Hi, I found this info in other site and tested in my lab but seems are not working well Match protocol HTTP host The match protocol HTTP url command is used to match a url. It takes a regular expression as an argument. For example: match protocol http host *youtube.com* ! This would match anything in youtube.com like…
-
DUAL Finite State machine
Hello all, I'm reviewing some of the material I went over a few months ago because I want to start studying again since work has slowed down a bit (for the time being anyway). Anyway, I'm looking for a good DUAL Finite State Machine flowchart and I CANNOT find one. The one in Doyle's book is really damn archaeic, but it is…
-
VPN for wireless Question
Has anybody set up a VPN from wireless client to the local router in order to get access to resources such as the LAN and internet. I remember Jeremy Ciaro from CBT nuggets talking about how a wireless client associates with the AP and then VPN to the local router so if people that are not authorize on the network accesses…
-
IOS IMAGES THAT SUPPORT CISCO SDM VPN'S
so i finally got cisco sdm working with my gns3 setup. and i was going through the menu and i tried several different ios versions and platforms supported on gns3, one was a 2691 ios image and one was a 7200 ios image file. both did not give me the option to support cisco sdm vpn's. does anybody have a running list of…
-
EIGRP aggregate traffic
Hi, BSCI Exam Certification guide mentions "EIGRP aggregate traffic..." (see bottom of page 103). What does it mean by that? Does it mean EIGRP traffic that goes through an interface from/to all configured VCs?
-
ONT - Round 2 Today!
I'm headed back to the exam center this afternoon for another shot at ONT. I feel a lot more prepared this time around thanks primarily to some practice with the MQC and also thanks to CBT Nuggets and Trainsignal videos. I'm still nervous, though. I really underestimated this exam the first time around and I'm really…
-
CCNP Track
I deal with VPN, GRE Firewalls all day. Should I start with ISCW and knock it out. Or would it be better to start with my BSCI and keep the routing and switching stuff fresh in my brain? I guess it depends on me. But maybe someone wouldn't mind sharing their opinion
-
Starting my CCNP lab
So I just passed my CCNA and on the 24th I start the CCNP course for the Cisco Network Academy. I have started putting together a lab and from what I have read, I'm heading in the right direction. Currently this is what I have: 1x3550 24 port + 2 GBIC slots(64/16) 70$<-- especially proud of this one 1x2610(48/16) -55$…
-
EIGRP network statement
Under the EIGRP routing process, when you issue the command "network 10.0.0.0", but the actual interface has a 24-bit mask, what will be put into the route table: the Class A network or the class C network? Does OSPF give you the *option* to leave the mask out of the command? Thank you!
-
problem launching sdm
i am getting the following error when trying to execute sdm " Startup Error has not been granted with the necessary privileges in order to startup successfully, or another unknown error occurred during startup.Please close all involved browser windows and try again by granting all requested privileges." what version of…
-
UDLD Simulation
For those interested: I was going over some BCMSN stuff from several months ago and couldn't remember how I simulated a UDLD detection without breaking a cable. I finally dug up an old lab I had and the lights went on. Use a MAC ACL applied to the interface where you want to simulate the UDLD activity. If you recall, UDLD…
-
Call Stats on CME
Hi Guys, I am looking to gain some call stats from our call manager express router. Basically we want to know ho many calls are being dropped/un-answered to a specific extension or pickup group? We have CME running on a 2811 and the IOS is (C2800NM-IPVOICEK9-M) the handsets range between 7945's and 7965's. Any help would…
-
CCNP ONT
Hi all I am sitting my CCNP ONT 642-845 in a month, has anybody passed this?, if so have you any tips? I am currently studying from the cisco press books, are there any topics missed or not covered in enough detail. I passed my CCNA three years ago on the 14th of OCtober so i really need to pass this one. Do you have to do…
-
BSCI Exam Scheduled
Just to let everyone know I have my BSCI exam scheduled for 9/15/08. I have about a week left to work some labs and do some final reviewing. I'm feeling really good about this one. A positive attitude will help get me that passing score. :) Quick question for all of you who have completed the BSCI, how hard should I review…
-
redistribution
Let's say I have 3 routers. Routers A, B, and C. Router A is using EIGRP, and Router C is using ISIS. ABC Router B will have 2 way redistribution. Only level 1 ISIS routes must be redistributed into the EIGRP realm. EIGRP routes must be redistributed as level 1 routes in the ISIS realm with a metric of 12. Are these the…
-
problem in dynamips - blank telnet session
It took me two days now to get dynamips understood and working, but i have a problem. After i start a router using a specific IOS which is c3620-i-mz.122-37.bin, and try to telnet to this router, I get a blank telnet session for ever. I really need this IOS to work, cuz it's very light on my PC, and i have a BSCI .net…
-
CCME Upgrade
I have a question that is kicking my butt. This all began with me not having a command that is being used in Cisco Network Academy for the ONT material. At the end of a module, they gave a practice lab that used the command "codec" under ephone configuration. My dreams were stricken down, though... I guess I'll take a step…
-
640-553 IINS
Has anybody here taken this? There seems to be a SEVERE lack of study materials for it around the 'Net. I've got the Cisco book, but it's so broad that I don't really think it's hitting the high points of the test. Any suggestions on where to go for exam resources on this one would be greatly appreciated.
-
cisco equipment
i know this equipment is a little dated, but i know there may be some people where i work who may be able to use some of it to study for CCNA. what do you guys think of the price? i live in the same city as this guy!! http://stlouis.craigslist.org/sys/836142917.html
-
it is time...!!!
im taking the last of the CCNP test which is the ONT im hoping to be ccnp by next friday any input on this test?
-
BSCI passed
Passed my BSCI yesterday :) Even though the testing center couldnt figure out to print a decent score report (or anything else for that matter), first off the score report didnt come out, then they had to call some people who could manually print it out. It said passed on the screen, and also says passed on my VUE account…
-
Halfway there
So i took my BCMSN this morning and passed with a 909.. It was quite a bit harder than I anticipated, but it didn't leave me with the mind numbing experience as the BSCI did. Now I know the logical progression would be the ISCW, but at the moment I am at a crossroads between doing the ISCW or the ONT.. for the the ISCW…
-
IBGP-EBGP confusion simple network
as according to the diagram R3 and R4 are IBGP peers and R4 and R5 are EBGP peers. the advertise route of 50.1.1.0 /24 network is reaching R3 and even choosen as best route and so in its routing table .. R3#show ip bgp BGP table version is 4, local router ID is 10.1.34.1 Status codes: s suppressed, d damped, h history, *…
-
IOS versions with compatibility issues
I can't find anything on this online, so maybe you techies can throw in whatever you think/heard: I'm about to update our core 4500's from 122-22 to 122-25. When I gave our cisco account rep a quick call to update him, he asked what code was running on our 3750 stacks and on the few 2950's and 60's we have. After hanging…
-
Symbol-Err
I can't find anything good on this error. Does anyone know what it means or point me to some documentation that can show me how to fix it? Thanks, Brenda
-
how to copy configuration from pix 515e to asa 5520
helllo i have pix 515e i want copy configuration to asa 5520 please send me all information about this solution many thanks
-
Cisco IPS exam before SND
Hi, I'm planning to do CCSP cert. I wanted to know that can I take Cisco IPS paper before I attempt SND exam. I'm already working on Cisco IPS and have working knowledge to wanted to attempt it first. I'm already a CCNA. Thanks, Neeraj
-
PIX/Remote Desktop Question
Okay everyone knows that 3389 is the port used for a remote desktop connection. For security purposes I change the port to something else unless it is to one of our remote locations through a pix to pix tunnel. Well we have a vendor that will not change the port to something else. We have to allow it (government) so my…
-
Need Voice help please
I am trying to learn cisco VOIP, so im trying to setup a lab and I wanted to know whats the easiest lab to setup to learn. Also, this question may be stupid but oh well, Cisco Call Manager, is that run on a server or on a web interface of a VOIP router. I was looking to get a IAD 2431 VoIP GATEWAY ROUTER and start my lab…
-
1760-V as a PSTN switch?
I've looked at the old docs for the 1760-V and it looks like I can stick (1) VWIC-2MFT-E1/T1 (1) VWIC-1MFT-T1 and a VIC-2FXS without issue. Anyone have a configuration like this or similar? Thanks
-
Practical QoS Question - Limiting bandwidth for Flash...
So...we bought a nice, expenisve web caching appliance so that things like the NBA finals and such would not overrun our network...then it happened...certain websites decided it would be more fun to stream in flash or silverlight, both of which ride on HTTP, making it difficult to sort them out and limit them. I'm thinking…
-
PASSED BSCI
rescheduled my test this morning because i had a gut feeling and went with it. Passed the BSCI on my first try with a score of 888. thanks for the help everybody especially for BGP. What i used to study: Official Exam Guide Self Study Guide CBT Nuggets TrainSignal videos as well as the cisco site next up BCMSN
-
ASA5505 was working but now i am not able to ping local reso
Forum, I successfully configured my ASA5505 the other day, and everything was working great. Today i have remote users telling me that they are unable to connect to remote resource (servers at my location). They are unable to ping our file server, and exchange server. This was working just last week, and no modifications…
-
tacacs traffic through a firewall
I'll google this as well, but in the interim... I've added two new HA switche stacks (3750G's) in our DMZ which I'd like to have authenticate via tacacs+ (the previous 2950's just used local auth), which happens to reside inside our network behind our E-Biz PIX firewall. Anyone know the ports tacacs+ uses to…
-
basic qos idea
Hi, I am a beginner on Qos. Waned to know about a basic stuff from you. My reading has been stuck on these topic. Consider a simple scenerio like this: Internet cloud> (Fa0/1)layer 3 switch (all other Fa ports)>all client workstation. Please help me clearing the following basics: 1. Here, where I should implement the QoS.…
-
basic qos idea
-
OSPF router-id
Quick one about the router-id. In the self study guide it says that using the router id command is the preferred method and overrides the loopback and physical interfaces. but if the router is rebooted or looses power then the router id is reset. So if a loopback is created as the router id then its more stable as its…
-
EIGRP route summarisation
OK so ive started hitting the bsci self study book after having a few weeks off from finishing the ccna and have my first question :) OK, so i know what this is and why its used etc but in the Teare self study book it mentions the hub and spoke design as the most commonly used layout but in the few examples used in the…
-
BCMSN Tomorrow **EDIT:PASSED**
First of four ... I'm finally ready for this test I think. I've been studying for about 4months solid and I've used a ton of BCMSN resources: Self-Study Guide cover to cover CiscoPress Lab Portfolio CBT Nuggets Flash Cards from an old version of the test PEC (Cisco's Partner Education Connection) Bunch of labs from CCIE…
-
ip route, with interface as next hop
Hi, I was doing some labs and it occured to me, I dont really know what happens when you have a static route statement such as: ip route x.x.x.x y.y.y.y FastEthernet0/1 How does the local router send out a packet for x.x.x.x/y.y.y.y onto the fa0/1? and how does a/any receiving routers know if its meant for it to keep…
-
2nd network card of CCM server
Hey All, How does one configure the 2nd network card of Cisco call manager 5.1 server? I’m wanting to set up a redundant link to a redundant switch, But I couldn’t see anywhere in the CallManager Operating system to configure the 2nd Ethernet port on the ccm server. On the cisco doco “Cisco Unified CallManager Operating…
-
PASSED ISCW!!!! SCORE 938! i AM A CCNP
hey guys, great news! I passed my last CCNP exam today! the ISCW!. scored a 938! this was a very hard exam. they really drill you on PPP, MPLS. and of coarse security. had a scary moment when one of the sims wouldnt allow me to view the console. I wont say anymore because I dont want to violate the NDA but I had to tell…
-
OSPF State
Example; [SanJose# show ip ospf interface fastethernet1/0 FastEthernet1/0 is up, line protocol is up Internet Address 140.100.17.129/28, Area 3 Process ID 100, Router ID 140.100.32.10, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State DR, Priority 100 Designated Router (ID) 140.100.32.10, Interface address…
-
BSCI to BGP exam
-
sticky mac address
when you configure the maximum mac addresses that can be learnt on a port for port security using 'switchport port-security maximum (max) ' that number of addresses is dynamically leant from the port and any additional macs are violations right. so what use is the command 'switchport port-security mac-address sticky' if…
-
Cisco Unity .. CiscoUnity_ConvMsg Errors.. Advise please..
Hi Guys, I have recently upgraded to Unity 4.2 and everything appears to be working fine with no reported problems. However, in Event Viewer I have noticed occasional CiscoUnity_ConvMsg Errors.. On further investigation these errors are due to Failsafe conversations relating to ConvCVMMBoxReset... Does anyone have any idea…
-
problem with marking thu VPN
Hi, I need a little help. I am trying to mark an icmp packet that was been mark from its orign and should be mark when received from the tunnel interface from its destination. for example: from router A I send ICMP message to Router B From Router A it is mark with dscp af13 as I used a acl to match From Router B it has…
-
EIGRP multicast / Acknowledge
Hi, Can someone shed some light on the validity of these statements: - Hello packets - Sent as multicasts, do not require ACK. - Query = Sent as multicast, require ACK. - Reply = Sent as unicast, require ACK. - Update = These can be sent as unicast and multicast, but not 100% sure when what is used, also require ACK. - ACK…
-
Call manager on VMWare
I have successfully installed call manager on VMWare. If anyone needs any help, just ask.
-
final CCNP exam this weekend
Im taking my final CCNP exam this weekend! ISCW! whoo hoo! I cant wait to finally be done with the NP! I believe when I pass I will be doing a dance in the testing center.
-
simulation
Is it necessary to do a 'copy run start' at the end of a sim?
-
MPLS ISCW lab problems
Hi, I've been going through the MPLS labs for the ISCW and have hit an issue. The lab is from the CCNP2_lab_4_2 series. Connectivity goes as: HQ (CE) ---> ISP1 (PE) ---> ISP2 (P) ---> ISP3 (PE) ---> BRANCH (CE) Routes from HQ: HQ#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX -…
-
PIX to Edgewater SitetoSite VPN
I was hoping someone might have experienced configuring an Edgewater device (EdgeMarc 4300T) to establish an IPsec VPN tunnel to a Cisco PIX (515E). Let me give a litte background on our setup. We have 5 remote sites. Three sites have Cisco 1700 routers, one with a 515 PIX, and one has an EdgeMarc 4300 (installed by that…
-
I'm able to ping the switch from the router, but not from
Hi, I'm at work right now and this happen to one of our office. I'm not able to access one of the computers on the office, so I try to ping the switch and router and I'm only getting reply from the router. SSH into the router and I ping the switch and the PC and I'm getting reply from router. Any ideas why I'm able to ping…
-
CCM 6 On Chrome
When we moved to CCM 6 here at work I have been so annoyed with how slow the pages load, was using Firefox. I tried out Googles new browser with CCM 6 and it is sooo much faster. Pages seem to load 50% faster on it. I highly recommend it to anyone who spends alot of time in CCM 6. http://www.google.com/chrome?open
-
Passed the BCMSN today
Took the test this morning and passed. The test was a breeze compared the material on the BSCI. Had a tense moment in the testing center when the screen would not format correctly to allow me to view all of the material I needed to see. Had the coordinator come in, and she reboot the machine twice (as I held my breath,…
-
GNS3 - Amazing
So I guess I never realized how amazing GNS3/Dynamips really is until I started messing around with it. I'd heard that it would be a great resource for everything routing and I have to say that I'm very impressed. I've been in switching/campus mode for a long time studying for the BCMSN, but I'm just starting to dabble in…
-
ONT scheduled
ONT scheduled for this tuesday at 1500 Zulu, OUT.
-
Study Material
I have worked with Pix's and ASA' before but really want to get into learning more about the ASA's. I was looking through the CCSP exams that cover this and have found the 642-523 and what i think is the newer 642-524. My problem is i cant find any books about either of these exams or any material in general. can someone…
-
Hello all and BCMSN question
Just wanted to say hello to everyone, as I am a new member to this forum. I have been reading anonymously for several months now and have noticed that the members here seem to be helpful to one another and eager to see their fellow cert-seekers attain their goals. Because of that, I am happy to join this forum. On to the…
-
Failed BSCI, again
Damn it!!!!! I swear I thought I nailed the sims.
-
Multicast roles
Hi, I am a bit confused about the following roles: - Querier = The router that sends out queries, and receives reports from hosts. If multiple is elected on multiaccess networks, the highest IP address is elected. - Forwarder = The router that actually sends out multicast traffic onto the subnet. Is elected based on the…
-
Poison Reverse CCVP in the house
You already know what I'm about Knocked it out CVOICE QOS and C I P T i tell yall do you wanna talk to me did the GWGK anad the T U C I'm here now can't you see ! aoooow I'm going to rest now lol thanks for the pointers guys
-
LAB WITH DYNAMIPS
Hi, I'm new around here and new to dynamips as well. I've recently installed it and everything works just fine. While trying to build using the txt file a topology I have encountered several errors: The lab sketch Looks like this: here is the lab I've written down, perhaps someone can identify mistakes I've made, and or…
-
IP SLAs - ICMP Echo Operation for Failover
SO I have a 6509 in the DC with a MSFC3 and my coworker and I are ramping up for an internet failover plan. After reviewing some different options, the IP SLA seems to be the most straight forward. Anyways the Cisco feature navigator shows that my image supports this. c6msfc3-jk9o3sv-mz.122-17d.SXB11a.bin…
-
BGP in BSCI
I've been using the Official Exam guide fourth edition along with cbt nuggets to study and i have a hard time believing that the Exam Guide covers in full all that is needed to know for the exam. I checked Cisco's site for the topics to be covered for the exam and this is what it says: Implement BGP for enterprise ISP…