-
CCNA_registration
Hello, I will be taking up CCNA(640-802) exam in march. Pls suggest me the required link to register for CCNA exam. Thanks, Prajwal.
-
I was asked "are Cisco exam questions tricky?"...
Are Cisco Exam questions tricky? well...to some, perhaps no...and others, perhaps yes. Some may say: "There's no such thing as a 'trick' question". Sometimes, placing a bet on the table of 125 dollars can make the question seem a little trickier...but it really doesn't. Here's a little test Question for the readers: (This…
-
Am I ready?
I was originally going to take ICND1 before christmas, but I got so busy with work and personal life that I had to put it off for a couple of weeks. Since then I've been studying and labbing like crazy. My subnetting isn't quite 100%, but if I look at a subnet I can tell you what the bit notation is and can figure out the…
-
Correct IOS For 2511 Access Server
Can someone please point me in the right direction regarding which IOS in particular would be best to use for my 2511 Access Server? It currently has 8MB DRAM and 16MB FLASH and I would like to have SSH, Telnet and Terminal Services functions on it.
-
Collision domain clarification
Hey guys, I'm completing my latest computer networking assignment and have a task to count the number of broadcast and collision domains within a few different examples. I feel comfortable doing this but I'm unsure about a small section of it. Just wanted some clarification if I have got the right idea, any help would be…
-
Does anyone have cisco routers 2500 in your lab?
The reason why i am asking is, since i have two, one for frame relay (2522) and one for remote access (2511) i just decided to upgrade the IOS which was a bit of a pain with the flash being locked, but found a way to boot it so i could write to it :D if anyone wants to some advice on that i be happy to help, they are both…
-
CCNA Old Books
Few years back i took CCNA classes at community collage, i could not take the CCNA test at that time but i brought CCNA books Todd Lammle 6th edition also Cisco press Wendell Odom 2nd edition, so my question can i study these 2 books for CCNA or do i need to buy new editions. Any suggestions will be great.
-
Frame relay hardware question.
Right now I'm looking into getting some 2620xm routers for my lab. I can get them with Wic1-DSU-t1 cards pretty cheap. I would go with the wic-2t's but that would be a budget buster. I have some wic1-DSU-t1's laying around so I can make them dual serial no problem. Can you use the wic1-DSU-t1 cards and configure them to do…
-
ip route doesn't work
Hi, I am using packet tracer and I have a problem. I have a configuration with three router and I am adding static routes to each router, so the problem is that I add the static route and it does not appear in the routing table. I appreciate your help. Thanks for your time.
-
Passed ICND2 yesterday night!!
Finally! Finally! After all the studying and practicing, I passed the CCNA composite exam on the first try!! With 3 minutes left!!! Almost missed it!!!!, wwwwhhhhhaaa!!!! all the multiple choice questions and drag & Drop questions I know for SURE that I answered them correct, I know them inside outside very very well, but…
-
Wendell Odom's CCNP Build List?
Thinking of getting this gear for CCNP. Go for it or no? CCNP Build Lists Thanks for reading. /Regards
-
CCNA: summary doubts
Hi all, I am using the Todd Lammle book for CCNA and I am doubting about the answer on a question about supernetting. I checked the errata but didn't find anything about this written lab so it might just be me who is doing something wrong :s Chapter 5. Written lab. For each of the following sets of networks, determine the…
-
Upgdating my cisco ios *****Help*******
Hello, I have my CCNA lab now, and I want to update the ios on all my equipment which are: 2x 2950 24 port switches 1 2520 router 2x 2620 routers. I am starting firstly with the switches, both have the current "c2950-6qh412-mz-121-(12c).EAI.bin", and I have recently downloaded the "c2950-i6q4l2-mz.121-22.EA14.bin" from the…
-
OSPF configuration
Lammle says you have to remove IGRP and EIGRP because OSPF has an AD pf 110 while IGRP is 100 and EIGRP is 90. But why? Is it because a router can run only one routing protocol at a time?
-
WAN question
I'm just reviewing the WAN chapter in CCENT study guide (Todd Lammle) and one his notes says "PPP and ATM can be configured on an asynchronous serial connection. HDLC and Frame Relay cannot." I thought asynchronous serial is part of a circuit switched network i.e ISDN so I'm trying to figure out how that sentences relates..
-
How hard is a Cisco job?
Just curious as to how many people in this forum currently have a job working with cisco gear everyday? What sort of day-to-day challenges can we expect and how difficult the job can be after you are certified?
-
preparation question from book seems wrong: confirmation?
Hi all, I am studying for doing my CCNA exam. In the book of Lammle Todd I got the following question: 9. What are two purposes for segmentation with a bridge? A. To add more broadcast domains B. To create more collision domains C. To add more bandwidth for users D. To allow more broadcasts for users To me this should be b…
-
Quick subnet question.
I just started messing with subnetting today, I am learning it through the CBT nuggets video as of right now. he provides some practice subnetting questions and my work is not matching up to the instructors work. "200.1.1.0, break into networks of 40 hosts each" is the practice question. MY WORK- 40 networks= 00101000…
-
What is link layer protocol between a Cisco switch and a Cisco router?
I know between Cisco routers, it is usually PPP. But between Cisco router and a Cisco switch, I don't recall any specific configuration mentioned. Similar is between a Cisco switch and a Cisco switch.
-
Where are you buying cheap equipment?
Hello all, I've seen many here mention some insanely cheap prices for routers/switches. I understand they are not new gear, but I've yet to come across prices that you guys mention. Where do you get such cheap gear, ebay does not show these prices. I'm in the process of building a ccnp lab myself, and wondering if any…
-
Ccna:s 1/9/12
I went ahead and scheduled my CCNA Security exam for 1/9/12. Any last minute labbing ideas or books?
-
Going to start studying for ccent.
Hey guys, I have recently decided that I am going to work towards getting my ccent and move on to ccna later on. My question is on study materials.. So far I have been looking at: CCNA Cisco Certified Network Associate Study Guide ICND1 2011- Todd Hammle CCNA Certification All-In-One for Dummies 2010 CCENT Certification…
-
Which are the basic CLI Commands to know by memory
Hello, I am currently studying for my CCNA cert, and I have recently started to use Packet Tracer, which is very good. I was wondering if anyone could suggest some basic CLI commands that I should know by memory when setting up practice networks in Packet Tracer.
-
Router memory/file system question
Spent quite a bit of time on google and looking through various documents on Cisco's site, but haven't been able to find anything on this. When I bought my 1760's, they had cme on them when I got them. At some point, I backed those files up, then deleted them. I have 1 file in flash that is visible, and that's my IOS. That…
-
frame-relay and split horizon
Hi, I've configured the above frame relay. I've added static map statements and I'm using mulitpoint hub and spoke. The routers can all ping each other and I have enabled RIP on all routers. I'm advertising the 192.168.5 network to R1 and the 172.16 network to R1 and they can ping fine. Because of split horizon though I…
-
ICND1 Pass
Yes, its another "Passed!" thread. I took and passed ICND1 today. I used the Sybex CCNA (v7), Sybex CCNA command guide, CBTNuggets, and the INE videos. I have ICND2 lined up later this month, so it is back to labbing to make sure I have everything down for part 2. The test was fairly straight forward. I ran into a couple…
-
Packet Tracer Woes
After months of using real equiptment, I tried packet tracer. After 5 bug encounters and a strange DCE/DTE clock bug, I shut it down and went into my access server. Hint of advice kids, Use the real thing. Once you use it in work extensively and studied it on real stuff like I have... It's almost fun to be able to go into…
-
Configuring 2620XM through console (RJ45 - RJ45) - first time
Hi, I just got my routers and cables and I am trying to access them through the console port with a rollover rj45 to rj45 cable and i cannot set up a connection in hyperterminal or tera term. It asks me for a host name and I don't know what to put . Any help would be appreciated. Thanks,
-
CCENT Certtificate
I passed my CCENT exam on 28th december '11. I recieved my congratulations mail from cisco and I followed everything from the mail (verified address, agreed cert. agreement .. etc) But, They didn't send my certificate by post yet. In the history page the latest update is they processed my ccent-kit on january 3rd. Can…
-
I wanted to setup a CCNA study session.
I was wondering if anyone would be interested in innitiating a basic online get together for a CCNA study session. I know alittle bit of information and am trying to prepare for the exam and having a partner or several would really help keep me motivated. I'm going through a break-up and having a hard time focusing on this…
-
Frame Relay DLCI confusion (local versus global)
I'm currently reading the ODOM ICND2 book in Chapter 13 - the Frame Relay section. Can someone please explain the local versus global DLCI's and clarify this some - or point me to some doc that explains this better? I've read the section a couple of times and it seems to be confusing as to why the DLCI is local, but then I…
-
OSPF and loopback addresses
I have been read about OSPF areas, and routers that use OSPF can set up loopback interfaces if required. OSPF uses areas to divide up networks. My question is where to loopback addresses fit in the topology of the area map. Do they get assigned to an area or do they just exist outside of the areas. I was just curious if…
-
ine videos
Hi!!! I'm looking at maybe buying the videos from INE for the CCNA. Has anyone used them? How are they? I won't be going for the CBTNuggets because those are a little bit too expensive.
-
Is this a good lab and deal for CCENT-CCNP
Hi guys. I was just wondering if this would be a good lab to purchase for CCENT-CCNP or should I purchase it piece by piece? ThanksCisco 3620 2950 CCENT CCNA CCNP Lab with 10U Rack | eBay
-
Can I use shortened commands for the labs?
For the lab part of CCNA exam, is it ok to use "sh cdp neigh" instead of the full "show cdp neighbor"? And do you lose points if you use the question marks in the labs as a guide looking for the correct syntax of the commands?
-
Suggestion for controller lab
Guys, the Official Certification Guide for this wireless certification does a terrible job at showing you the basics on the configuration of the controller. I followed what it said in chapter 13. I kept trying to connect to the controller's web interface through 192.168.1.50, and I configured everything in that initial…
-
Cisco Networking Acadmey
Has anyone in this forum even taken the Cisco Networking Academy course and if so what was your experiences ? I am currently coming to the end of CCNA Exploration "Network Fundamentals 4.0 and getting ready to take my final exam and I thought I would pose the question. Please advise Patrick
-
DCE vs.DTE
I'm having problems understanding how the term DCE and DTEs is used. Please explain the definition. Lammles book is vauge in its usage of this term. A gatrillion thanks!
-
Terminiology question in STP (Spanning tree protocol)
Spanning Tree Protocol - Wikipedia, the free encyclopedia I thought network segment means a collection of devices connected to a certain switch. If this is the case, how could a network segment can be connected to two more than one switches as the diagram shows....
-
CCENT Lab, add static routes. Not able to ping across the network
Greetings, I'm working on a lab for my CCENT, where I have two networks and I should be able to ping the laptops once I have everything configured. Both routers have a serial interface along with an ethernet interface. The lab also has you add static interfaces on both routers. There are two networks, Cisco Network and R2…
-
Its been a while, taking CCNA:Sec next week
Been working on it for about 10 days pretty hardcore. Hopefully they will have an opening this week at the test center down the way. After getting my CCNA and being thrown into a crazy MSP where I support 300+ customer networks with sonciwall, hp, brocade, cisco asa's etc... CCNA security is alot of info but its alot of…
-
Is CCNA test broken up into sections?
Is the test broken up into subject areas or all mixed? Also, about the 90 min time limit, is there a break time at any point? If no, Not even before starting the labs?
-
Is calculator allowed for CCNA test?
Is calculator allowed? Or is calculator program available on the test?
-
CCNA exam: expectations of IOS sims
Hi all, I have been here in the past and successfully passed my exams for Solaris 10. Now I want to take the CCNA exam. From what I understand doing just the CCNA exam or taking ICND1 & 2 demands the same knowledge and leads both to the CCNA certificate. What I wonder is, if I do the ICND1 & 2, do I have to pay for both…
-
Discounts for companies with certified employees
I remember reading something somewhere that companies can get discounts on Cisco equipment for having Cisco certified personnel. I asked our Director of IT if he knew of anything like that and he said he didn't. I did some looking around and didn't find too much online. Does anybody have any clues as to where I could dig…
-
How the transparent mode of VTP works?
This mode sounds weird. It does not accept update, then what is the point this mode exists? Also, though the switch in transparent mode does not accept updates, it forwards certain updates outward. What is this for?
-
Need Advice
I have bought the books and the CBT nuggets on the CCDA exam. I need a suggestion on the best way to study for this exam also I need to know of some good practice exams (perferably free). I have a background in building automation and know allot about IT but this will be my first Cisco exam as I am moving from BAS to IT.…
-
Unable to ping serial interface
Another newbie question here! For some reason I cannot ping the 172.16.10.10 (serial 0/0/0) IP Address from anywhere within this network.. I'm not sure what I'm missing here. The network 172.16.10.0 has been subnetted with a /29 mask... So I have subnets 0,8 in the picture below with available addresses in the 0 subnet…
-
Routing TCP/IP book reviews needed
I want to buy these two books does anybody read these books already(I need serious help). I heard that these are good to enhance knowledge. Routing_TCP/IP_by_Jeff_Doyle_Volume_I Routing_TCP/IP_by_Jeff_Doyle_Volume_II
-
How does VLAN trunking operate over mixed networks?
I understand that VLAN trunking uses trunk port to send updates. In a mixed network, it means connect a trunk port of a switch in a FDDI network to a trunk port of another switch in ether net. If this is the case, I guess, at least a converter is needed to fill up the physical layer between two switches. And anything else?
-
self study training methods?
Hi all, I was wondering what self study training methods you use to teach your self? so far I am reading a chapter and then follow it by a video from CBT nugguts in between I make notes, then depending on the topic i would try and lab it
-
starting CCNA** Home lab advice.
Hello All, This is my first post :D , I am going to start studying for CCNA hoping to get CCDA afterwards and then either CCNP or CCDP (my possible path). I have read a lot about setting up a home lab in the forum but I think a lot of the post I've read are kind of old (2006-200 . I want some advice about what would be…
-
Lab equipment recommendations for 2012
Trying to make a post that'll hopefully end up as a sticky so people don't keep rushing out and buying really old equipment or equipment that won't help them for ccna. If everyone else can add to this so we end up with a decent thread Options for labs/labbing 1. hardware 2-4 routers with wic's and cables 2-4 switches with…
-
VTP, STP and Loops
Hi Everyone, hope you all had good new years. I have been configuring some VTP/STP setups and I was just interested in something.The diagram above is what I'm working on. The switch on the left was originally the root bridge and this topology had two ports in blocking mode. One on the bottom-middle switch going up and one…
-
Passed Icnd1
Passed ICND1 :) Scored 937. I used ICND1 book by Odom, cbtnugget video by Jermey, techexams forum, subnettingquestions.com and cisco learning network. The test was very much easier than i thaught. You've to be 'master' in Subnetting. On the way to ICND2 :) Cheerz,
-
CCNA Voice Home Lab question
I was wondering if PAcket Tracer can be used for CCNA Voice labs, if not how about GNS3, I mean is it possible to do part GNS3 and the other part real equipment maybe? Just wondering, I have a telecommunications background and want to get ccna and then ccna voice. Thanks
-
Lab Advice
I am now considerate buy my own lab. I currently have a old Cisco 2500 and 2600 router in storage. I am going to test this weekend to see if they work and have IOS. If not my friend says he can download the IOS. With that in mind, IF I purchase a Cisco 2621 64/16 and two Cisco Catalyst 2950 24 port. Will this be efficient…
-
IP addressing Question (GNS3)
I’m running three virtual routers (2691’s with NM-4Ts). The topology looks like this: All serial interfaces are on the same subnet, 192.168.0.0 (/24). R1 S1/0 = 192.168.0.1 255.255.255.0 R2 S1/0 = 192.168.0.2 255.255.255.0 R2 S1/1 = 192.168.0.3 255.255.255.0 R3 S1/1 = 192.168.0.4 255.255.255.0 R1 can ping 192.168.0.1,…
-
Why 25xx router's ethernet module uses AUI port, not RJ45?
Now I have to pay extra dollars to find a AUI cable to convert it to RJ45...
-
RIPv2 Problem
I'm working through configuring RIPv2 between two routers in GNS3 and I've hit a wall. I attached the network topology diagram and RIPv2 is working between the Ottawa & Vancouver router however Toronto Router does not seem to be getting any updates. If I run a debug ip rip on the Ottawa router I can send that it's sending…
-
CCNA Security next?
Good morning all, I passed my CCNA last Wednesday, and I plan to hold off on certs for another year two to get more job experience instead of rushing with certs. I've been studying for 4-5 months for the ICND1 and ICND2 and passed both on the first try. Now it feels weird not studying for anything. I've heard people say…
-
Does a IGRP/EIGRP router have only one process on the same router?
if I run twice, router igrp 10 ; 10 is AS number Will the router start two IGRP processes, or, keep one IGRP process? I tried it, but to be honest, I can't even figure out how to verify which case it is.
-
640-461 ICOMM v8.0
Hi all, 640-461 ICOMM v8.0 Introducing Cisco Voice and Unified Communications Administration v8.0 (ICOMM) v8.0 I presumed it means CME 8.0? If i have a 2801 would that be enough? Thanks.
-
Pushing past the obstacle
I have taken the ICND2 too many times. I am seriously close to burning out on Cisco, but really want to finish and move forward. The frustrating part for me is that I can setup routers and switches, I just test really poorly on it. My failings have been in the troubleshooting areas, I do not currently work in the…
-
Question about PPP and HDLC
When configuring the username and password, does the username have to be the hostname of the remote router?
-
What is the point for Cisco to give its three-layer hierarchical model?
core distribution access To be honest, this model looks pretty award to me. What is the advantage of it? Is lay2/layer3 model not enough to describe Cisco's devices' function?
-
Frame relay
Frame relay set up I'm finding it difficult to run a frame relay lab because u have to set up the frame relay switch first. Obviously this makes sense but it almost seems that at the CCNA level you wouldn't be expected to configure the frame switch because the books I've read and videos I've watched always say "this is the…
-
VTP Pruning
I read the following from a cisco support documentation page (Catalyst 6500 Release 12.2SX Software Configuration Guide - VLAN Trunking Protocol (VTP) [Cisco Catalyst 6500 Series Switches] - Cisco Systems) I thought the whole point of VLANs was to shrink broadcast domains to just hosts on particular VLANs. Then why is…
-
Frame Relay and multiple Frame Relay switches.
I've been trying to do this in GNS3 but it doesn't seem to be working. What I've done is use various frame-relay route statements throughout the frame relay switches in an attempt to route datagrams through the frame relay network. I have three "frame relay switches" and three routers, each connected to a frame relay…
-
Passed CCNA Security today!!
Passed today with a 977! Happy, but tired as hell being that it's the end of the year and I've been working toward this all year AND it's Christmas, and now I'm Cisco'ed out (burnt out) so I'm going to take at least a month off and perhaps see what kind of prospects are out there before I delve into the CCNP stage. I'm not…
-
Question about WANS
the Customer Premise Equipment is the equipment on your side and you are responsible for it correct?
-
Configuration Register?
I'm reading Todd Lammle's book, and I'm trying to wrap my head around how they calculate the configuration register. It's page 266 from CCENT Study Guide. If someone has a quick example the config register value is calculated in regards to hex/binary that would be good. Thank you
-
what happen to the post group study
hey where is bugme 1 and where his post of studying together there were 4 member who were interested and now the post is no where
-
Layer 3 switches - Why are they named as such?
I'm reading in my cisco book the following: I'm not sure I agree with this statement. I know each interface on a router corresponds to a different layer 3 subnet. However, a layer 3 switch can route between different layer 3 subnets using SVI's (switch virtual interfaces), right? I mean, technically routing between VLANs…
-
Tagged Frames on the Native VLAN
Hi Guys, I have just read this section from the CCNA 4.0 Some devices that support trunking tag native VLAN traffic as a default behavior. Control traffic sent on the native VLAN should be untagged. If an 802.1Q trunk port receives a tagged frame on the native VLAN, it drops the frame. Consequently, when configuring a…
-
Qemu image on my GNS3
I am using GNS3 for my CCENT/CCNA simulation labs. I also have 1700, 2600, 2800, 3620, 7200, callgen, pagent and pix IOS images. For now I am just using 2600 and 7200 and ethernet switch in my lab. I am now in Link-Sate Routing Prot topic (OSPF). I want to use a qemu host but I dont know how to configure it. Does this mean…
-
Pick 2, Pick 3
On the actual CCNA exam, if there is a multiple answer question will the software alert you if you pick too many or too few answers? What happens if the question is pick 3 and you click next with only 2 answers select? The Cisco Exam Tutorial gives you a warning and will not let you proceed, does the test behave the same…
-
Requirements for 802.1q Trunking (Speed and Duplex?)
Hola, I ran across a practice question which mentioned restrictions on port speed/duplex but I've found no such documentation online or in Cisco Press ICND2 or BCMSN, the practice question said full duplex was required as well as 100mb speed. I've tested trunking on 2 2950s and was able to trunk 802.1q at 10/half without…
-
Are these protocols on the CCENT exam?
LAPB and LAPD?
-
**Help** Setting up an access server
Would I need a 2511 or a 2509 router, to set up an access server for my CCNA lab? Or could I use any other model?
-
What to do first?
When dealing with the types of questions that show you a network topology and ask multiple questions (most likely dealing with subnetting) what is the best step to take first? I have a habit of going straight to the possible answers and going through each one of them? Here is an example.. Refer to the exhibit. The goal of…
-
Anyone pass the CCNA only with CBT videos?
I truly hate reading. I tried to read the cisco press ccna book and i just lose focus and dose off. I was planning on buying a cbt video and take notes via pen and paper.
-
Why there is no power button on a cisco switch ?
As mentioned at the title, why ? why and whyy ? Or maybe I am thinking so narrow to understand the technology lies here. On a Catalyst 2950 switch, it is really hard to plug in and off the power cable every time. Wouldn't it be so easy if there was a power button like a cisco router ? Enlighten me pls....
-
Still confused on how to get block size
Ok, I'm still working on subnetting here. Here is a question from subnetting.org that I'm lost on: I'm still confused on how to do the blocking for this problem. I did the following: Tried to get the block size by subtracting 32 - 21. The 21 is the prefix notation. I get 11 Once I convert the ip address and subnet into…
-
Reviewing the concepts of CCNA
For the final exam for CCNA do i need to know every frame that apear in course? (ex : http://bitmindframes.info/wp-content/uploads/2008/06/vtpframe.png OR http://routemyworld.com/wp-content/uploads/2008/07/ospf-packet-header.jpg etc.) This can help me in a real enviroment or in a job, or for debug?...or it is something…
-
Newly Cert'd
Well today I passed my ICND2. A few surprises on it, good ones mostly. I figured there would be more labs involved. I realize I have not contributed much to the forum here, mostly lurking and looking for tips. So I anyone has questions about the test itself, I will do my best to answer (within the bounds of the testing…
-
Passed ICND1!
I just passed the ICND1 exam a few hours ago. I took the class a few weeks ago at Global Knowledge, and then spent the past week filling in the gaps and practicing. I bought the Boson exam simulator for the exam, and I feel that helped me tremendously. I found the quick reference sheets in the back of the CCNA Flash Cards…
-
Building my lab... piece by piece
Hi all, I have decided to start working toward my CCNA. I went through 2 semesters of double classes a few years back that covered the entire CCNA exam. This was right after they went version 3 I think and the cert was pretty tough. I feel confident in taking it, especially breaking it up with CCENT first. I am planning on…
-
Design recommendations for Network of 75 hosts
Hi all, I am no professional in the area of design so i want to ask for a recommendation as regards the above subject. A friend of mine who is a newbie in cisco world was made the network admin of a small hotel with 50 employees and approximately 75 hosts on the existing network.From what he explained to me,there are 7…
-
Lab at work Access from home..
So lab is mostly done and I have it at work. I would prefer to keep it there as that way I save on the electrical bill and don’t mind if it is up 24/7. It struck me today that this setup is going to suck on the weekend and late at night (I don't want to live at the office). I would prefer to keep it off my existing network…
-
Packet Tracer and STP
Okay, I think after a few hours of sort of scratching my head, I've come to the conclusion that STP does not function as it should in PT. Someone back me up on this. Example 1: In a two switch topology with redundant trunks between the two switches, as expected, one port will block. However, the "not functioning properly"…
-
Failed ICND 2 for third time...I'm taking a break
Hello all, I failed ICND 2 for the third time. My score was the lowest of all three attempts (scores in attempt order 706, 748, 650). I'm taking a break. Happy Holidays.
-
Port Security, Sticky, Vlan trunking, VOIP phone sort of question
Okay, studding for CCENT (one reason I posted this here) and got to port security. To turn on the port security the port has to be set to be an access port. The sticky option means the first MAC address the port sees gets set as the allowed MAC for that port. So we have VOIP phones and our computers all plug into them and…
-
Passed today
833/1000 with 804 being the minimum passing score. Let me tell you what I had in posession and what actually worked. I owned: Transcender practice test, CBT Nuggets, Lean Key training, and the Exam Force Practice test. I also took classes at a community college that used the Cisco Networking Academy. Out of all of these,…
-
ICND2 on 12/15/11
At 10 am I have my test.... not ready at this point, but I have a lot of studying time open in front of me
-
Help with a question ICND1 wendell odom...
Hi, I don't post much, so this is my first post and I'm hoping someone could please explain this answer to me...much appreciated. I don't understand which would be added to the routing table from a debug ip rip command...please help me understand :) . This is from the cd in back of the book Pearson IT Cert. Practice test.…
-
CCNA - Requirements and Study Materials
Hi Everyone, I am new to this site and just registered today. I just need help clarifying some information. I am trying to study for the CCNA exam. As to what i understand, either i can take one exam or take 2 exams (combination) CCENT ICND1 640-822 & CCNA ICND2 640-816 - do i have to study for these two exams to complete…
-
Help setting up my lab**CCNA**
Hello, I have the following equipment: 2x 2600 routers, which each have WIC Cards. 2950 switch 2520 swith. 2 DTE/DCE cables 4 x power cable --- These have been plugged in--- 1 console cable 1 utp cat 5e cable And I know that I need to use the console cable to connect to my laptop to configure everything, but I am not sure…
-
Exam 21/12
Hi Everyone, been a wile since my last post, first of all happy holidays to all :) Im back in the Cisco track after a massive detour due to BSc obligations. IINS exam scheduled for next Wednesday :) wish me luck For anyone starting this certification's study I have prepared using the 1) SSG 2) Work experience (Heavy site…
-
Taking CCNA soon - Notes attached
I've taken my ICND1 about a month ago and getting ready to take my CCNA in about a week or two. I've taken the Cisco course in college (and graduated 2 yr), but just took Microsoft certs since then because of my last jobs. Being in IT Security, I'm now taking a different route obviously. I've read the entire ICND2 and…