-
Network problem at work help!!
Hey guys, Not sure where this is suppose to go but hopefully it's the correct place to ask. We are having issues at work with the network. We have multiple sites across the Province and some users cannot access the internet at all but others can at the same location. This is happening to about 4-5 different sites with some…
-
New ccna 2016 dropped serial wan tecnology
I ask myself how can you study wan tecnology without serial connections?
-
Icnd2
I passed the ICND2 today score 867/825 barely passed, but I'll take it. Good Luck to any that is taking the test soon. For studying I used NetAcade - took a college course that coinsided with the icnd 1 and 2. a few online pdf's. Most items I got were basic. know layers helps, as well as knowing vlans and how they…
-
tripping on ip routes question
So this practice question keeps popping up for me and ive no idea how to solve it,even thou it seems not to complicated: routing is configure on router with these 3 routes: ip route 0.0.0.0 0.0.0.0 192.168.1.1 ip route 10.1.0.0 255.255.0.0 192.168.2.2 ip route 10.1.0.0 255.255.255.0 192.168.3.3 then im given 6 ips to sort…
-
Access-List Practice Questions CCENT
Anybody know of a good site that has lots of Access-List practice questions? Thanks in advance.
-
ccna security
Guys I need your assistance I have taken 210-260 last month and failed got 849, But i need you to assist me with the correct Answer for the below Questions: Which Auto NAT policies are processed first? * Dynamic with longest prefix * Dynamic with shortest prefix * static with longest prefix * static with shortest prefix If…
-
Passed 210-260
Passed with 860. Sweaty palms. I watched CBT nuggets series complete roughly twice, read the terrible OCG, labbed tons with ASAv's in gns3, and have a decent networking background. Didn't have any problems with buggy questions luckily. Good luck to all testing.
-
Study Labs
I would like to build a lab to help me on my studies but I don't have any physical router or switch. Now, I have used a Cisco packet tracer in my earlier days into IT and one of the guys who has been studying for Cisco certs recommends GNS3 to build a virtual lab. My question here is, which is much preferable virtual labs…
-
STP path cost: I'd like a better answer
I've been trying to find any mention of how IEEE came up with the revised STP path costs, but to no avail. For the original STP, path cost was just 1Gbit/s divided by link bandwidth. The calculation for RSTP is also fairly straightforward: 20Tbit/s divided by link bandwidth. But the revised STP path costs are given in a…
-
Anyone know if you can do icnd1 before the exam change in August and then do icnd2..
with the version 3 exam when it is released and still obtain your CCNA or do they have to be the same version? Reason I am asking is I have just started studying and I will only have time to do ICND1 before the middle of August. Thanks
-
What are those stand offs called
What do you call those standoffs on wic that the cable screws screw into. as an example there is one on each side of the db60 connector on the wic in this picture. I'm hoping to find out if the stand off on a wic 1T are the same size as on a hwic 16a. I have a hwic 16a that is missing the stand off and was hoping to…
-
Troubleshooting Help
This is a work related question, but I figured it could help out anyone studying for an exam. Here's the typical situation that happens at work: Our team gets notified by the monitoring center that a specific interface has went into an alarm status. For example, Gi0/5 has been 85% utilized for the last hour, please…
-
DIKTA question
Question: Which of the following are not private addresses according to RFC 1918? (Choose two answers.) a. 172.31.1.1 b. 172.33.1.1 c. 10.255.1.1 d. 10.1.255.1 e. 191.168.1.1 Answer: B and E. RFC 1918 identifies private network numbers. It includes Class A network 10.0.0.0, Class B networks 172.16.0.0 through 172.31.0.0,…
-
mac flooding
hi, i am doing mac flooding, i connected 3 computers with a cisco switch, and using backtrack as guest on all of them. on attacker, i ran macof on terminal, now i ping between other two machines. now i should be able to see those ping packets on wireshark running on attacker's machine. right? but i am not able to, please…
-
Benefit of show ip arp command
Hey guys, this is probably going to sound like a trivial question, but here it goes: What's the benefit of using the show ip arp command? I'm using Odom's Second Edition CCENT book (Router and IP troubleshooting chapter) and it doesnt really explain the benefit of this command? Can anyone give me a real world scenario or…
-
Block sizes of classful masks?
Hello, this might be a very simple question, but I can't find the answer anywhere. What are the block sizes of these classful masks? /8 /16 /24 If they are 0, then 256 - 0 = 256. So then the subnets are 0, 256, 512, 1024. This can't be right!?
-
ios for 3550
I'm trying to find c3550-ipservicesk9-mz.122-55.SE10.bin to update a 3550 The ios is no longer available from cisco I don't really want to download it from a random file sharing site Does anyone know where I might find the file I'm looking for?
-
How long should an IOS transfer take via TFTP????
I am using SolarWinds and Putty to do my first IOS upload from my PC to my 2811 routers CF card. IOS version is c2800nm-adventerprisek9.mz.151-4.M10.bin Had loads of !!!!!!!!!!!!!!!!!!!!!!!! to start. Then it changed to a slow progression of ......!........!.........!.........!...........! which it is still doing after 90…
-
Enough time for 200-120 CCNA v2.0 (or ICND1 and ICND2 v2.0)?
I have Lammle's "CCNA Routing and Switching Study Guide: Exams 100-101, 200-101, and 200-120." I began reading it less than a year ago and then work got in the way. I made it to chapter 2. Recently, my employer required me to obtain CompTIA Network+ and I passed the exam. I'd like to do CCNA now and noticed that the v2.0…
-
L3 Switch
Howdy Fellas, Whats a nice solid L3 switch cisco switch to buy thatll get me through the cnna and ccnp and not need to be replaced but last?
-
Router practice labbing
I now have four working 2811 routers, so as part of my preparations/revision for the exam I'm finally doing some labbing to gain a better understanding of routing protocols, their configuration, and all the commands around setting it up and checking it's all working. I've started with this lab. Now okay, I accept I'm in no…
-
Config backup problem
Here's a new one on me so looking for ideas as to what may be wrong and how to resolve. I have a Windows 7 PC hooked up to my lab on which I manage all my devices via serial console cables using Putty. On that PC I'm running SolarWinds TFTP Server and I've used this software to back up my configs and IOS for my original 3…
-
Does 1/2 the CCNA Data Center renew CCNA R&S?
Before the CCNA Data Center came out, passing any Associate level Cisco exam (except for ICND1 or ICND2) renewed all other associate level Cisco exams. Then the CCNA DC cert came long, which is split into 2 parts, just like the CCNA R&S is. If you pass just one of the CCNA DC exams, but don't go on to pass the 2nd to get…
-
Unrecognised entries in running config
My memory and CF cards arrived yesterday so I've been upgrading all the 2811 routers in my lab to 512mb. I now have two running 12.4 AdvancedEnterprise using 64mb CF cards, and two running 15.0 AdvancedEnterprise using 128mb CF cards. Having ran through the procedure to factory reset one of the IOS 15 units I deleted the…
-
CCNA Wireless 200-355 Resources
Hi folks, I'm intending on sitting the CCNA Wireless exam in the next month or so, I've just read through the official study guide but I'm looking for some practice exams or an exam simulator, that kind of thing. Like what's available for the CCNA R&S. Can anyone point me in the direction of that kind of thing? Also...Any…
-
Problem with lab for Floding Static Routes
Hi This the lab for Floding Static Routes wend I Shutdon int Gi 1/0 traffic need to move to Fa 0/0 on route r2. but it's not working... Attachment not found. by Chris Bryant note:Floating Static Routes For CCNA And CCNP Study (1/3) https://www.youtube.com/watch?v=jNN4Xt59pJ8 CCNA / CCNP Certification Training: Floating…
-
Loopback Ospf and router ID?
do you need the included in the ospf network statements, so it well be advertised or participate in OSPF, for the Loopback be the router ID?
-
IOS with voice cme, ipsec vpn and routing protocols
Hi There, I am want to know is there any ios which support all features of voice, vpn and routing protocols for cisco 2821 routers thanks in advance Regards samper
-
ICND2 in 2 weeks
Watched all of Udemy's Chris Bryant videos from the 200-120 boot camp that was on sale at $9.99. Have about 45 minutes left of CBT Nuggets' Jeremy Cioara. Reading Wendel Odom's Appendix B of the 200-101 Official Cert Guide after having read all the other 22 chapters back-to-back. I wish appendix B had been baked into the…
-
Worth it for a VMware admin
I have some basic knowledge of the UCS platform but need to get a better understanding as my new day to day role involves them. I am mainly a windows server/VMware guy who is looking to get more UCS understanding but not trying to learn how to configure routers and switches. Would this be a good exam for me or should I…
-
Need some advice
Hey Guys I need some advice on what I should look into. I am 21 years old and currently working as a help desk technician, contract ends in about 4 months. They are talk about extending it but I want something a little more secure. I have had an internship as an IT Support assistant for a little over a year, and when this…
-
Study Material
Hello all. I really want to study hard for this cert, but I tend to prefer written material as opposed to video for my main study digest. I'm currently studying by way of CBT nuggets, and while the videos are great, I miss the method which helped me pass the CCNA (OCG and labs). It seems that the general consensus is that…
-
Planning Home lab for CCNA training and self study
I am starting to prepare for my venture into Cisco CCNA. I already brought the Official Cert guide for ICND 1 and 2 and I am going to take a boot camp class for CCNA v3.0 training next spring. (I know the cert guide is set for v2.0 training but Cisco is ending testing on v2.0 in August 2016) I am listening to a video from…
-
CCNA V2 or CCNA V3?
Hi All, I know Cisco has released a new CCNA exam for 2016 but I am seeing that some of the study material is not yet ready so far I have only seen the study guide. All my CompTIA certs are due to expire later this year, so my question here is, if I take 100-101 will it update my CompTIA certs or will I need to take…
-
MY Three weak areas, Suggestions on doing better.
So I was going over my print outs from my last 2 tests and I have 3 weak areas. LAN Switching Technologies , IP Services ,Network Device Security I am re reading the chapters on these subjects and making flash cards on questions in these areas as well as watching some videos on them. I am using my Boson testing software to…
-
STP is on CMD1v2?
HI. is STP on CMD1 v2
-
Have you recently sat a CCENT/CCNA exam?
While I appreciate the non-disclosure agreement prevents people reposting questions they encountered on their exam, I'm sure there's no restriction on discussion in general as to topics you saw. So with that in mind, can I ask everyone that has sat an exam whether or not they've ever seen the following questions as I'm…
-
2 correct anwer. what is the best anwer by CISCO...
I'm using the exam cram book by cisco. there is a question 2 correct . how CISCO pick Wrong VLAN. !!!! The incorrect default gateway is being handed out via DHCP. note: (there is wrong default gate ip address by dhcp pool ) The PC1 is connected to the wrong VLAN note: ( is not connected to right port)
-
New cisco exams
Hello, About 6 months ago I believe I was fully capable of taking and passing the ICND1 exam however due to work commitments (military) I couldn't. So it's been 6 months or so with no study, I was planning to just refresh a bit and then go for it in the next month or 2. However I got an email saying they are updating all…
-
Having a Frame Relay brain far*
Yeah, I know FR is out in a couple of months, but I still like to lab it for jokes. So today I have an FR switch and three endpoints and here's the topo and one FR switch config: and then here's one config on the router that has frame-relay routing enabled ON the config on the bottom, I assign two dlci's to the same…
-
Boson ICND2 Exam Question
Going through the Boson exams, and one of the questions in a simlet has me confused. After inspecting the configuration of a switch, it asks which of a series of statements are true. In the switch configuration, port Fa0/2 has switchport port-security entered in the running config with no other options. Under show ip…
-
Passed icnd 2 :D but what next?
As stated above I have finally passed the icnd 2 exam after a few tries and few months of studying! I couldn't recommend the cbt nuggets videos enough for this. On that subject I want to keep pressing on with Cisco studies while I still have my subscription with cbt but not sure which path to take next. I want to take the…
-
L2 switch create collision or reduces collisons?
quick question. L2 switch create collision or reduces collisons?
-
Odem's or Lammle for first CCNA study book????
Hello. Now I have my lab set-up it is time to start studying. I have both the Odem and Lammle book available. Is there any general opinion on one being better than the other for a newbie CCNA student? I have read through the Barker and Wallace Network+ N10-006 book and watched the Professor Messer vids for Network+ also as…
-
No Ping Between 2 Hosts
Hi, I had a problem the other day, I couldn't ping from host A (10.44.33.2/24) to host B(10.44.33.55/24). It seemed to be a badic connectivity problem, however there was something pretty strange: *Pay attention both hosts are on the same LAN. First, I could ping host B from any other device on the network and host B could…
-
CCNA 3.0 Composite Exam Voucher
I have two extra CCNA 3.0 Composite Exam vouchers for 200-125 that can save $50, please PM me if you need one.
-
ping 224.0.0.5 "Hello" on OSPF.
Hi, I have a quick question? the hello for OSPF is 224.0.0.5. so if I ping 224.0.0.5 is the hello. can you ping hello on any router protocol?
-
Passed CCDA new exam 200-310
Hi! I have passed my CCDA exam 200-310.
-
My first PT lab hiccup, can't ping switch from another LAN
Hey networkers, I am setting up my first packet tracer network and am stumped on why i cannot ping my "admin" switch vlan (vlan 1) from outside the 192.168.1.0 LAN. I just want it to sync it up with the DNS/SYSLOG server. The hosts connected to the admin switch can ping across the network to the server, but not the switch?…
-
it's a ACL a layer 4 transport layer protocol ?
it's a ACL a layer 4 transport layer protocol ?
-
R1 can't access TFTP server
Probably stupidly simple, but I can't back up the running-config and IOS from my border router (R1), yet all the other devices I've tried to back up so far have worked. Here's my network diagram as things stand at the minute: All three routers are connected to SW1, as is PC1 on which the TFTP server is running. R2 and R3…
-
Passed ICND1 V2 Today!!!
Whooohooooooo! I am so excited that I passed that exam! Man I felt pretty nervous going in, probably because I wanted it so bad. After a few questions I seemed to hit a a stride and the questions got easier. I am so happy, relieved, and excited and cant wait for the ICND2! Again I have to say whoooohoooooooooooo!!
-
Have ICND1 100-101, can I wait and take ICND2 200-105?
I got my ICND1 100-101 about a year ago, but have been procrastinating on taking the ICND2. I still don't think I will be ready to take it before the exam changes to 200-105. Will I be able to take the 200-105 exam if I didn't take the updated ICND1 exam? And if I can, will that give me my CCNA? I hope my question makes…
-
Ever used a Startech RJ45 console rollover cable?
Looking at my options for connecting to the console of multiple devices at the same time: Option 1: I currently have a load of serial console cables but only one serial port. For a long time I've thought about a 4-port serial card like this one which will give me 5 connections, but I've never got around to buying one,…
-
Cisco Console connection cable
So I've been trying to find a console cable that has supports multiple different connections (like 10 different console connections) so I can use my 1 USB to Serial adapter. Does anyone know the kit that I could buy preferably on Amazon? You all rock!!
-
Are all routers really noisy?
Hi, finally got my cisco lab up and running, powered it all on and wow what a shock... how much noise do my 3 x 2811's make!! it is like being in a factory... Is this normal or are the fans knackered because the units are 2nd maybe 3rd/4th hand?? Would really like to know as they are really making a lot of fan noise...
-
So it seems the non-ecc memory does not work in the 2811 router
So finally went to log into my routers today and the one I had put the 2 x 256mb boards that came with the routers in worked fine. The two that i put the 512mb boards in of non-ecc ddr1 memory that i got from ebay (link below) did not work and instead returned the error message... "ERROR: Unsupported DIMM memories in DIMM…
-
interpreting subneting question
got this question on sample exam: You are designing ip addressing plan for one of the offices,on your network,the office has been allocated 172.16.32.0/22 address.The office has 24 local area networks (Lans),each with maximum 20 users,and 7 point to point wan links. You need to conserve as many as possible addresses,thus…
-
Passed 210-260 Today on second try....
I still think the exam is a stinking pile of garbage. This exam may play a decent part in and of itself in driving business for Checkpoint and Palo Alto solutions. Felt like I hit every question dead solid... Got a 890.. And I actually work with ASAs, AnyConnect VPNs, and Web Security Appliances daily. Not to be negative…
-
Is two months enough time to cram for ICND1 v3?
I've just started studying to take the ICND1 exam and noticed today they're retiring it August 20. I was in telco/networking many years ago but all that is history so I am pretty much starting from scratch. Now I'm worried that if I don't manage to pass by then I will have to relearn everything. The book I've been…
-
200-125
What book can I use to study for 200-125 since the book isn't going to be released for a couple months?
-
CCNA exam rescheduling with discount voucher
Guys Help me in this situation.I have provided with a composite discount voucher of 58% and the email is showing an expiration date on 3rd of june 2016 and i m not prepared that much and want to reschedule my exam to 15 june 206 because i have some medical issue too.help me out your answers will be helpful for me....
-
2960s Unable to Boot
Hi everyone, I am here stuck with a new 2960s that won't boot, I don't know what I did to mess the config so badly, but the switch just won't boot up ! It loads the image then hangs right here: File "flash:/c2960s...." uncompressed and installed, entry point: 0x3000executing... then all the lights on the switch goes dark…
-
ICND1 next Friday - Boson practice tests
I've got my test scheduled for next Friday. I passed the 640-801 years ago but opted to go the 2 test route this time. Bought the Boson tests yesterday to gauge my readiness. I've taken test A and B once each and passed both in the mid 800's. Anyone else who has taken this version of ICND1, what are your thoughts on Boson?…
-
Q. why I'm getting a port unreachable
this is lab. why I'm getting a port unreachable on wireshark but not on the router and also there is only 2 hop? ! hostname R2 ! boot-start-marker boot-end-marker ! ! enable secret 4 06YFDUHH61wAE/kLkDq9BGho1QM5EnRtoyr8cHAUg.2 ! no aaa new-model ! ! ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! redundancy !…
-
CCNA R/S Lab complete with photo....
Here it is.. Now, what do I do with it?
-
ICND1/CCENT Pass!
Good Afternoon TE, Here's my ICND1 writeup. Passed with a 935/1000. I felt over-prepared, honestly. I was ready to go in there, take a switch or router from nothing to full configuration (i.e. interfaces configured, static routes added, OSPF, NAT, DHCP, port security on switches etc) and it was significantly less than I…
-
31 Days Before Your CCNA Routing and Switching Exam
Hi guys, I am thinking to get the CCNA certification and saw this book. [h=3]31 Days Before Your CCNA Routing and Switching Exam [/h] Do you think is a good book? Is there any way someone could share it with me? Thanks.
-
CCNA Security: Udemy?
Hey all, Has anyone used Udemy for studying Cisco CCNA Security? https://www.udemy.com/ccnasecurityvideobootcamp/ The cost is quite reasonable. I just wondered if that and some hands-on labbing is enough to pass the exam. The official course book I is pretty shoddy, I've heard. Are there any other good study resources…
-
640-554 book vs 210-260 book
Hi, I'm gathering materials to study for CCNA Sec, and it seems the book I purchased a year ago (in anticipation of studying for this exam) is already "obsolete" as the exam has been updated. The reviews for the new CiscoPress book are anything but glowing. I've seen the LabManual (v2) comes highly recommended. I was…
-
fail for the 2 time. don't know if worth it, re-take?
well I just the test today and it fail FOR 2 TIME, same score 795... I really don't know if worth it, re-take.
-
I have 5 Voucher for ICND1, ICND2, or Business Specialist Level 1 exam
I have 5 Vouchers for ICND1, ICND2, or Business Specialist Level 1 exam . They will expire Jan 2017 .They worth $150 each . I want to trade them for 3 Vouchers for the following cisco exams that each worth $250 300-xxx (CCNP R&S )- need 3 voucher 642-xxx ( CCNP Data Centre ) - need 3 vocher 642-xxx (CCNA DC 640-916) -need…
-
Selling 2 Cisco Vouchers
Hey guys I have 2 ICND vouchers I am selling. They can be used for either exam. Since my CCNA is done, I don't need these extra vouchers. I am selling these each for $125 each. First come first serve for expiration dates. PM if interested.
-
Noob Question On Log
Is there a way to remove the --more--- when I capture config files? I hate cutting/ pasting & end up the --more-- disrupts me.
-
Epic Failed CCNA R+S
Well, it's been about a week. I scored a 600. It was a terrible test. I realized that I did not have enough practice. Of all things, ACLs messed me up. I mean right off the bat the very first question messed me up for the rest of the test. I've been playing around with packet tracer and building networks from scratch and I…
-
What kind if rack do i search for?
Quick question. I have 3 x 3560's and 3 x 2811's. I would like a cheap desktop rack for them, but what do i search for? Do not want a big, expensive cabinet. Have not had much luck on ebay searching for cisco rack and I don't know what the size description is. Thanks
-
CiscoPress
I just wanted to let you know of summer sale on the Ciscopress.com website. "buy 1, save 30% or buy 2+, save 50% offer on books, eBooks, and video." the coupon code is "SUMMER" and the sale ends 31 of May. I managed to save a lot when I purchase three books the CCNP LAB Route, Switch and Tshoot for only 75$ :)
-
Need Some lab advice.
Hello My current lab setup is: 2x 2651XM's 48mb flash 256mb ram. Both running IOS c2600-adventerprisek9-mz.124-15.T14.bin 2x 2950 Switches. Both running IOS c2950-i6k2l2q4-mz.121-22.EA8a.bin 1x 3550 Layer 3 Switch. IOS c3550-ipservicesk9-mz.122-55.SE10.bin Accessories: 3x WIC-1T and 1x NM-4A/S Module I have been studying…
-
ICMP used UDP or TCP and IP . test question.
on a windows out out--> icmp , in <-- ICMP on a router or Linux out---> UDP, in <--ICMP so for cisco test is UDP or ICMP
-
Having a Problem With NAT
Hey guys. I'm having a problem with NAT. I have my internet connection connected to Router1. There are 2 switches hanging off of that, with a few VLANs. My NAT is working fine there. Laptops in the different VLANs are able to browse the internet without issue. I have Router2 connected to Router1 through a serial…
-
NAT? is there is easy way to remeber!
Inside local address Inside global address Outside local address Outside global address Local address Global address
-
Subnetting Chart?
Do you guys actually utilize subnetting charts on the exam? I was told using this particular feature having a few columns such as Mask, CIDr, Subnet, etc ... and simply referencing the chart would be better then actually just "doing the math".
-
FEDVTE Training for CCNA Security
Have any of you used this to pass the exam? That's probably next for me after my CASP is done.
-
what is Ingress and Egress port
ingress - entering egress - exiting The ingress port is the incoming port. The egress port is the exiting port.
-
Failed the 210-260 today.... by one question
And... Let's just say.... I remember specific question/answer choices..... And still have no f***ing earthly idea what answer Cisco wants... After going back and reading up on the technology. It's almost as if the writers of the particular section in question opened up some random Cisco link on the technology, and…
-
CCNA Security Pass
Passed this morning - I did not think the exam was terrible overall, but there were some very oddly worded questions and I had to have been very lucky with some guesses to get the score I did. I have some experience with ESA/WSA/ISE/Sourcefire, so the questions that might be oddballs to some weren't bad for me - I think…
-
Where can I get a copy of IOS 15.1 from please?
Where can I get a copy of IOS 15.1 from please? I have 3 x 256mb cisco flash cards.
-
How do I get DHCP to work?
Hello, I have been trying to practice on DHCP but packet tracer doesn't seem to want to do it. I tried to put in the exact commands in a router but they aren't recognized. Can you guys help guide me through this?
-
How would the new exams change any lab set-up?
If one was looking to set up a lab for CCNA, with the new exams, would you look for anything in particular? I guess you wouldnt need to do frame relay anymore. And what ios version do you need to do IPv6?
-
Good motivations and strategies to stay on target?
"Just do it" -Nike "Get 'er done" -Some redneck I'm familiar with those, but if anyone has any personal strategies they use to help keep themselves on track, I'd be open to hear them. I'm struggling with ICND2 studying, simply because I'm not that interested in the material. I mostly want to focus on wireless tech, but I'm…
-
Looking glass/ traceroute question
Does anyone have any familiarity with Looking Glass web sites? I do a lot of ping tests and traceroutes when I come across speed issues that I'm trying to troubleshoot in a network. I know that traceroute is only going to give you info for the forward path. By just using my laptop is there a way to test the reverse path? I…
-
New Versions for CCENT/CCNA
CCNA Routing and Switching - Cisco
-
Problem with VLSM
Question: IP : 172.16.0.0/20 User LAN has 520 hosts , Server LAN has 12 hosts Sub-net the given network , assign the first usable sub-net to User LAN while wasting the fewest address. Sub-net further the 3rd usable sub-net, and assign the 7th usable sub-net to Server LAN. My workings: 2^10 = 1024, which is in the 6th…
-
Is 100-105 easier ?
Is 100-105 easier than 100-101 , as OSPF v2 and v3 is removed ?
-
OSPF / EIGRP Redistribute Question
Hello all. I am working on a Lab and need some help. R3 has fully functional OSPF behind it. R4 has fully functional EIGRP behind it Connected to each other on S0/0/0. Network 10.0.0.0/30 According to the lab, I have the following constraints: R3 S0/0/0 must not use OSPF R4 S0/0/0 must not use EIGRP R3 and R4 notify each…
-
measureup any good
got subscription to measeureup 200-120 practice exam questions,but so far trying around 10-20 uqestions averaging 40-60 percent.Find it really hard with troubleshooting specially when you have 20 word question and diagram on different page also inputting commands its like either you have to have right or it wont take…
-
What's the cheapest gigabit Cisco switch that runs the latest IOS?
Not that I'm going to get one any time soon. Just playing around with the idea. Jeremy Cioara recommended using real Cisco equipment on your own home network, but of course I don't want to slow my network down with old 10/100 switches. I'd need something with at least 8 gigabit ports, and something that runs the latest…
-
Ventilation Suggestions?
Hey all, I just received my 2960 and 1841 in the mail to add to my lab for my studies. However, with it being 26 degrees Celsius outside, I'm wondering if this is enough space in my rack between each device? I keep my window and door open for adequate airflow and have a fan in the room as well.
-
HUGE Price Spike on Cisco IINS v3.0 E-Learning
The Implementing Cisco Network Security (IINS) v3.0 has had a gigantic price increase and is now selling for $1500 on Cisco's site. This is a move in a very bad direction in my opinion. $1500 for what I would consider to be almost necessary study material? I'd already decided that I would not take another Cisco test after…
-
How many smart crossover cables needed for 3 x WIC-2T's CCNA R/S study please
OK, I now have ordered my 3 WIC-2Ts for £38 total. I just want to check one final thing, how many smart crossover cables do I need, I am assuming 3, is that correct? These leads are the last things i need to order. Thanks