-
First hop redundancy protocol
Sorry for noobie question but just went through FHRP and I had a questions. 1) Why would one ever use HSR over GLBP in a real life environment? Since can give you redundancy and also give you some LOAD balancing flexibility. I mean i know most big organization are running f5 or some load balance only designed for that but…
-
Thank you community members just passed my ICND 1
Thank you so much guys for answering stupid questions of mine. Just cleared the exam 30 min ago. messed up a bit on routing but everything else thought the reading and your guys help I was able to ace. Materials used: CBT Nuggets Packet tracer- labs labs labs labs labs Techexam forms Online articles and different…
-
Help asap regarding cisco broadcast storm and dhcp snooping
Hi guys. I'm just new in networking environment. can someone explain to me the meaning of broadcast storm and DHCP Snoopin on lay mans term? PLEASE. I really appreciate it. Thank you so so much in advance!
-
Passed ICND2, CCNA certified.
Sometime I think I worry too much. The exam was a little easier than I expected. The frame relay sim was very easy. I think the hardest part of taking the exam was assorting all of my on screen items on 15" monitor that the exam administrators use. I passed with a 960 (same as my ICND1 score). I think I will try a…
-
CCNA worth going for
So I'm just starting out on working my Network Security Certs. Have my CCENT scheduled in a month. I was wondering if the CCNA RS is worth getting or should I just skip it and just get the CCNA Security?
-
Lab Server
Hi all, Just wanted to confirm before I bought it so, will this server be okay for my lab. I need if for CUCM etc... Dell PowerEdge 1950 R3 1U Server 2x Quad Core 2.83Ghz 16GB RAM Dual PSU SAS/SATA | eBay Cheers A
-
CCNA Composite Pass
Hello TE! After my second attempt I was able to pass the composite CCNA R&S. I appreciate all the help this forum and its members have given me. I apologize I did not respond to my last failed thread where people were giving me suggestions. I have been very busy with numerous things in life. I passed today with a score of…
-
Access Server/Dual NIC Necessary?
Hello TE, So I've been studying for my CCENT and the theory part was okay but now I'm starting to get some practice hands on. Now when I looked at my lab this morning (2x 2811 ISR and 2x 2960 switches) and at the cable clutter under my desk (4 serial to USB going into my PC), I began to wonder if having an access server…
-
OSI model and TCP/IP
Hey guys I am studying for CCENT and having a hard time understanding the OSI model and TCP/IP. Understand some of it like the Application layer(using Chrome, Firefox, outlook) The Presentation layer (.jpg, .gif, mp3..... ) Session layer - making connections and stuff Physical layer - cables and such It just the books and…
-
Basic ospf configuration isn't working
Okay i'm having troubles for hours now, can't make basic ospf work on cisco packet tracer : in R1 :int gi0/0ip addr 192.168.1.1 255.255.255.0no shutint seri0/3/0ip addr 192.168.2.1 255.255.255.0no shut in R2 :int gi0/0ip addr 192.168.3.1 255.255.255.0no shutint seri0/3/0ip addr 192.168.2.2 255.255.255.0no shut in both…
-
ICND 2 Passed! CCNA R&S Certified!
Hola, Passed ICND2 last Saturday. I read the Cisco Press guide and my company got me training through a Cisco Learning partner vendor. The test wasn't too bad. The week I spent in training/labbing was probably the most helpful and attributed to me passing. I'm on to to CCNP now. I just went out and bought the CCNP ROUTE…
-
Help setting up NAT using packet tracer and setting up Cloud
Doing the lab using packet tracer AND I want to test NAT using Cloud. Can anyone help set that up so that I can ping 4.2.2.2 and 8.8.8.8 This is a picture of my network topology i been using so far. Set up base config, Ip address , vpn , ospf now it's time for nat and i'm stuck. Any help would be awesome. Thanks in advance.
-
Can't register phones with CUCM
I have a snow day from work so I'm taking the time to lab things up. I have 7961g's and cannot seem to register these damn phones. These phones do register with CME when configured. I disabled the telephony service in the voice gateway to avoid any conflict. I originally tried the manual route by adding the phone's mac…
-
Question about OSPF
Can you please explain why answer B is incorrect in the image below? This is not from a ****. Thanks
-
nat traversal codec question
hi, recently as part of a lab scenario myself and another forum member made some test calls between our call managers over the internet after pointing our dial peers at each other. no issues when we both used g711 and g728, but with g729 we could only get signaling to work and not rtp. all things being equal (dial peer/…
-
Soo confused about private to public, and inside or outside):
I am currently having a metal break down in CCNA 3, I feel like I forgot everything that I learned in CCNA 2. For my review I need to: 1. Specify private 2. Associate private to public 3. Designate interfaces inside or outside My packet tracer is due tomorrow and I've been trying to figure it out all weekend, and I feel…
-
3550: won't do router eigrp 1, not right version?
Hey guys, so I'm doing my home lab now with dynamic routing and I got the star routers to communicate between all three of them with router eigrp 1 on all of them with the networks and all, but I just removed the router on a stick from the 2600's to the 3550's. Well I got the router eigrp 1 to work on the 2600's fine but…
-
Good, Solid Router to replace 2600....
Hey guys, I'm using the 2600's in the lab and they work good for learning, but these serial connection's probably aren't really fast. The 3550's are more capable than the 2600's and I'd like to get some more beefy inter-vlan routers and/or replace the 1721 edge router (if I can upgrade it with a 10/100 or even 100/1000 wic…
-
Problem with CISCO Router 2600 series Booting
Hey guys, So it seems like i have a bad luck when it comes to cisco devices. Just broke a 2950 switch as some of you know. Now I have this new problem. This router was working fine when i checked a few days ago. didn't do anything on it after. but today when i started learning routing and tried to boot it up it shows me…
-
ICND2 more difficult than ICND1?
Hi everyone! I passed ICND1 last week :) I'm wondering if ICND2 is more difficult than ICND1.
-
CCENT / CCNA KiK Messenger Group
Hi Everyone, Saw something similar on the CCIE section. Would anyone like to make a KIK Messenger CCNA / CCENT group? Would be interesting. Add me - Simrid Thanks, Simon
-
Does CCNA SP renew my CCNA?
Hello everybody. I have valid CCNA and I'd like to renew it next year. The question is "Does CCNA SP renew CCNA?"
-
Switching Problem - Picking Your Brain - Question Inside
So I came across this question when I was looking for practices before going in for my CCNA. I am not quite understanding why host in VLAN1 would not be communicate with each other after the change. 802.1Q uses Vlan 1 as native Vlan by default. Fa0/1 on sw11 would send traffic to the other side untagged because it is an…
-
[Advice Needed] Is CCENT worth it?
Hi everyone, I appreciate your time for helping me / reading this thread. My question is a CCENT worth it, or is it worth going straight for a CCNA? I have studied the first module of CCNA R&S at college, I found it fairly tricky but still managed to come to terms with it. Just after some advice. Many thanks, Simon
-
Help With HomeLab Switch connections
Hey guys, new to networking. Studying for CCENT. Just got my switches and routers and working on switch configs right now. Starting from base and have no past background. So I'm trying to connect two switches via crossover cable. switch one is cisco 3550 and switch two is cisco 2900 XL. Now I'm following Jeremy of…
-
Decimal to binary. Subtract or Add?
Hi, when converting binary to decimal I was taught to create a table and add up the 1s. I.e : 128.64.32.16.8.4.2.1 O0001001 Equal 9 (pretty straightforward) When converting decimal to binary, I was taught to use the same table above but to subtract the IP Address. So. 240.240.240.0 128 64 32 16 8 4 2 1 You would say can…
-
Nat
So i think I have an understanding of the inside local/global Inside local --- my network Inside Global -- outside of my network where usually PAT starts taking place. Just outside my router interface where the ISP gives me my IP address Outside local -- what the heck? Outside global -- Outside on the internet ? Can…
-
NAT + ACL questions
hey everyone i have some questions.. 1)when that nat occurs at the inside interface or outside ? 2)i configure an ACL on interface that restrict some ip addresses and then i configure NAT for them but it seem that NAT happen before the ACL ??
-
My first networking interview
Hi guys, I obtained an interview for the next week, I am candidate for a stage therefore a junior level. I have three question for you. 1- Please , advices for me 2- If I have a router down, what can I do ? step-by-step or If I have a interface down what can I do ? (step-by-step) 3- If an interface is up/down continually.…
-
Error trying to use Crypto Command on 2950 Switches- NEED HELP BADLY
Hi, I have three switches in my home CCNA Lab, one is a L3 3550 which supports SSH fine. I am having big issues with the 2x 2950 switches, I upgraded the IOS to c2950-i6k2l2q4-mz.121-22.EA14 which according t Cicso.com is image that supports SSH. When I go into global config and try to generate the keys by typing crypto ?…
-
ICND2 Cleared! Whoop Whoop
Passed the ICND2 exam today, now CCNA. Thank you almighy and thank you guys at Techexam, your threads really go a long in assisting exam takers. Appreciated and keep it up. Off to CCNP Switch v2
-
just passed the ccent!!!
Hey guys so I previously failed the ccent with a 801. Today I walked in and passed it with a 854! I'm so happy Thanx everyone for answering my questions and for the positive reinforcement that I needed! Now to make it a Ccna. :) !!!!
-
CCNA and CCNET Questions
Hi Everyone, Sorry about the spam of posts. I was looking on the CISCO website and it seems the CCNET exam only requires a pass of the 100-101 ICND1 exam. But then the CCNA required 100-101 ICND1 and 200-101 ICND2. Does this therefore mean if you complete the first exam for the CCNA, you will get a CCNET too? Thanks, Simon
-
Passed ICND1
I don't usually post to forums, but I really enjoyed hearing success stories and it helped me get the confidence I needed to pass the exam. So, here it goes... I took the exam yesterday morning and was actually pleased to find that it was less of a chore than I had anticipated. My score was a 920/1000. Don't get me wrong,…
-
Subnetting Question. Bryant Advantage
Hi, I have been working through the bryant advantage subnetting guide and understand how to manually subnet, with some exceptions. One being valid IP Address ranges. I can convert the decimal address below into binary, and its mask. I can AnD the two to get the subnet address, and convert the binary back into decimal. But,…
-
Spanning tree protocol question
I need basic explanation for root bridge, root port, non root bridge, designated port, non designated port in spanning tree protocol. When I read about root bridge, root port, non root bridge, designated port, non designated port in spanning tree protocol, I can't understand the concept. And also there is three switches…
-
CCNA Questions
Hi Everyone, I know there is a tutorial to your CCENT / CCNA however I have a few questions. In the tutorial it mentioned that you can take two exams rather than just the single one. Does this therefore mean that once I have completed ICND1 and ICND2 I would have completed my CCNA certification? If not, how does it work?…
-
A question about 'longest prefix length'?
Afternoon, going through the book, im struggling to understand what 'longest prefix length' is in a routing table when a packet's destination route matches a few routes in the routing table? what does it mean by longest prefix length? got an example in the book but still not sure. thanks
-
Home Lab
Does this seem like a nice setup for a home lab already passed ccent. Plan to take CCNA and CCNP in the next year: 2x 2821 Routers with SDM, CME, 2 Gigabit Ethernet Ports 2x 2621XM Routers having 2 FE, 2 Serial Ports 2x 2950 Switches 24 FE Ports1x 3550-24-SMI Switch with EMI Layer-3 Routing Features
-
Cisco 2811, need a 802.11n or better card
New install with an old router. Want to use it to connect to Comcast Xfinity and also allow for 802.11n or better. What two cards support greater that 15Mb/s and 802.11n or better? I found the Cisco HWIC-3G-CDMA 1- DIAG Port Module and hwic-cable-d-2 802.11n but are these supported?
-
Any good books on TCP/IP?
While I'm studying for CCNA using Odom's books, I'm also looking to get a somewhat deeper/alternative perspective on the protocols and how they work. Any suggestions?
-
How much DRAM And Flash on my 2950?
How much DRAM And Flash on my 2950? It looks to me like I have 20 MB of DRAM and 8 MB of Flash, is this correct? Show Version: Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA12, RELEASE SOFTWA RE (fc1) cisco WS-C2950T-24 (RC32300) processor (revision M0) with…
-
Packet Tracer crashing constantly
Ok, so I am beyond frustrated. I am trying to use Packet Tracer to study for my CCNA and it keeps on crashing a lot. One of the main things that seems to trigger the crash that I been able to see has been been when I put in the IP configuration for the individual PC workstations. I am running Windows 7 64bit and I have…
-
port_sequrity with switch hub
hello i have a question with port security.i have connected a switch with a hub (in fa 0/1) and 3 pc behind that hub (pc2 with mac .2222 ,pc3 with .3333 ,pc4 with .4444).and a separate pc (pc5 ) in a fa 0/5 port in switch outside hub .the port security config is 2 mac allowed .(4444 ,3333).when i ping from pc5 to pc 2…
-
I have been told to subnet this ip...
I have been told to subnet 196.196.1.0 with two hosts 22 and 10 I have a CCNA exam tommrow and one of the parts is to subnet this and also fill in boxes such as Class of I.P, Number of bits in the original IP address, Number of bits used for subnet A, New IP subnet mask in binary, Maximum number of usable subnets, Number…
-
Subnetting class B
There is plenty of information out there on sub-netting a class C address, but what about a class B? I have a particular question in my study book that I just cannot seem to understand how they came out the answer. The question reads: Is 172.16.255.0/18 a valid host? The correct answer is yes; the subnets valid host IP's…
-
Pressure of studying for the exam
I was told this would happen by a buddy of mines. I have been studying hard the last month and a half and decided to revise my notes. I read over everything and none of it made sense !! I started to panic like oh my god I'll never pass this exam. On top of that I couldn't sleep because I was so worried and when I did…
-
ccent retest monday
yo guys retesting for the ccent monday. Kind of nervous, i got a 801 last time (804 to pass) i posted about it. so been doing some studying and mostly labs configuring ospf, show commands etc. Practiced subetting etc. any advice? I think i got it this time, but i would hate to fail this again hope this is the time i pass!!
-
Study Time Required For CCENT & CCNA
(I posted something similar to this on the Linux Forum "in regards to Linux", Wanted get an idea of which certification to do after Net+ with my time frame) I’m Travis. I have a couple years of experience in technology as a PC tech, ISP service installation/troubleshooting tech, and telecommunications (RF). I’m currently…
-
Administrative distrace
Been reading up on Administrative distance and this questions is been in my mind Why would one ever want to set a administrative distance which is not the default one? When running RIP or OSPF, isn't the router smart enough to always use the better one in this case OSPF since it had an AD of 110 so why would i even want to…
-
Switchport Mode Access
Hey everyone, I am self studying for my CCNA (taking the two test route) and I have a quick question. Is it required to use the switchport mode access port command on a port? From what I am reading in my CCNA book, all ports by default are access ports for vlan 1. So if i did use the switchport access vlan 2 command (sorry…
-
What is a decent cheap router/switch that I should buy for self-study CCENT
Something that I can buy used to practice the IOS commands
-
basic subnetting troubles
This could just be in issue with me not understandingsubnetting fully. I am following the CBT nuggets series and have been practicing subletting but a few problems throw me off. For example When trying to get 200 networks in a class a ip, i see that it will take 8 bits to reach that number so we need 8 additional bits are…
-
Using "overload" command with PAT
Hey guys So i noticed in one of my books, they were setting up dynamic NAT. But then they used the command "overload" when they have pool of 3+ public IP's Is this correct? Can you use a pool of multiple public IP's and still use the overload command? Or is that only done when you only have one public IP?
-
asa ios upgrade
I was able to get a asa5510 for really cheap. So, I'm look to make some use of it. But, the ios is really old. I can do a copy from a tftp server with no problem. But, can i just do one big jump in ios version or will it need to be done in steps. Does other firmware need upgrading also. And, what other software should I…
-
Needed some ASA 101
Ok, Now that I got CCNP out of the way I will be setting up camp here for awhile. I got my ASA up and running on GNS3 and now I need some labs to do. Looks like I'm going to need some 101 training. ASA is a whole different animal compared to an IOS router. I need some book recommendations and or videos. I feel like a…
-
Passed CCNA:Security
Passed the CCNA:Security exam yesterday with a score of 898 (right on the number). Without violating the NDA - the test had a few scenarios and 4-5 drag and drops out of the 61 questions. The rest were multiple choice of some sort. Most of the questions were based on CCP or the exam prep materials, but there were 4-5…
-
Trying to merge lan subnet with wifi subnet without killing internet access
I have a Cisco 871w which I am using as my router for internet access. It is connected to my cable modem. My outside local interface is Fast Ethernet 4. While my inside interfaces are Fast Ethernet 0 - 3. The subnet for that is 192.168.1.0 255.255.255.0. My wifi subnet is 192.168.2.0 255.255.255.0. My goal is to have 1…
-
Gigabit and Wireless N Router
Does Cisco make a router with a gigabit port and wireless N? I searched Google and all I come up with are what looks like home routers.
-
How much labs/simulations are there for CCENT?
Hi, should i be concerned with knowing router protocols and configurations for CCENT? Are there any simulations on CCENT? Thanks
-
IPV6 Global Unicast prefix address--GURU TIME!
OK, the address 2000::/3 has a range from 2000 - 3FFF I can't figure how that range goes up to 3FFF. Can we get a guru to explain it? Why not 5FFF? Thanks
-
Boson CCENT practice exam
Does the Boson CCENT practice exam questions include any of the simulations? Thanks
-
Whats the best place for legit questions
So the college i went to FORCED us to buy a test bank and they taught from it. I failed the test by 10 points because i botched a sim. Im studying on my own now and doing it the right way avoiding test banks but i need a good place for questions to see what areas I am weak in to study. Also, I use packet tracer, does…
-
ARP Question
I want to know, whats the reason behind it? Why is a particular host is caching the hardware address when a switch is smart enough to do this for you? i.e mac address table.
-
Hsrp & glbp
I have difficulty picking out the differences between these two protocols and I am afraid that will come back to bite me. Any tips for me? There is a nice chart here: https://learningnetwork.cisco.com/thread/42814 But that just emphasizes my point, they look very similar on paper.
-
Unsure about an answer
So after studying for almost 2 months I am ready to go for my CCENT Exam. While doing practice questions I came across this one which I AM sure the answer is wrong. Please someone let me know if this is correct and if I am wrong someone can explain why the answer is that is listed. SwitchA#show mac-address-table…
-
Help?
Not sure if this is the right place to post but i don't suppose anyone can recommend which routing protocol to use for a large network over 3 buildings around a city, I don't know anything about routing protocols i have used RIPv1 and eigrp. I've looked into OSPF and that seems the best but i need to know why to recommend…
-
CCNA R/S Defeated!
Hey good people! I passed my ICND2 (947) @ 10:27am on 1/8!! Long time coming! I went through ITCAP using Odom's book with Lammle's book as a supplement. I also used CBT Nuggets in addition to hands-on training. The switch models I use in retail stores 3570, 3750 and the occasional 3850. I worked on some 6500's and 7k's in…
-
CCNA/CCNA Security Lab
Starting March 1st I will be working on getting my CCENT, CCNA Routing & Switching and my CCNA Security. What hardware do I need to be able to get the out of all 3 certifications? I have a 2950 48 port switch and a budget of 300 to 500 dollars. I would like to stick closer to the 300 dollar mark if I can. Oh, and I need…
-
What am I missing
Failed 200-120 once already. Im very low (30%) in the IPv4 and IPv6 addressing but high in everything else. What can I study to help that area. Its frustrating because I feel like I know it.
-
which book for Wendell Odom should i read ?
If i'm not wrong I found that Wendell Odom is the best known book author for CCNA Wendell Odom I want to study CCNA to find a job as a Network administrator which book should i buy and study ? sorry if my Question is so silly or simple , i am just a brand new in this field thanks
-
Is this an error in Tod Lammels book or my head? lol CCENT ACL
Hey guys SO i have Tod Lammels book here CCENT 100-101 This is Hands on Lab 12.1 Standard ACL SO it says this: "In this lab you will allow only packets from a single host on the SF lan to enter the LA Lan" Go to LA Router create ACL and bind to int. So: access-list 10 permit 192.168.20.2 0.0.0.0 Int f0/0 ip access-group 10…
-
Chris Byrant's CCNA Boot Camp currently for 10$
Posting this in case some people are interested. CCNA Boot Camp is currently on offer for 10$! Definitely worth the investment for anyone pursuing their CCENT or CCNA. Think it only has a few days left. Edit: Deal no longer going, maybe next year However! You're still in luck! Rodney has enlightened us to a discount code…
-
CCNA passed and what after that ?
My background I have finally passed my CCNA in R&S and I am just wondering that what certification should I go for next. I am not into IT field yet but hopefully CCNA will put my foot in the door. In the meantime, I am thinking of getting some more CISCO certification. Below are the certifications i am interested in, just…
-
Scenario question
Hi, So here is a scenario question, would like to know what is the best practice or how you would go about setting this up. 1 router with 3 interfaces, one interface let's call it fe0/0 is connected to the internet or wan, and the fe1/0 and fe1/1 are available locally. Let's say the wan interface fe0/0 is 1.1.1.1 and the…
-
Puzzled! ... and that doesn't happen often!
So I'm setting up OSPF in the lab and now the left/right side of my lab won't ping the farthest reaches of my network network, my gateway which lets say is 192.225.225.15 it's odd!!! However the 1721 has the correct routes and can ping the 192.225.225.0 range on all addresses and can ping every address deeper down into the…
-
ICND1 100-101 Pearson IT Certification Practice Test
Hi everyone! I'm training for the ICND1's exam with the questions in Odom's book. And I try "Pearson IT Certification Practice Test" section "part Review" and the other (provided in the book). I would to know if the real exam will be as hard as the section "part Review". Thank for reading! PS: sorry for my english
-
OSPF why is this router ID showing???
Hello guys so im configure single area OSPF between three routersrouter 1.1.1.1 router 2.2.2.2 (this is running ipv6 and ip4)router 3.3.3.3When i issue a show ip ospf database. I see this that 172 IP is in router 2.2.2.2 so i went in set the route ID to 2.2.2.2 and did a clear ip ospf process. still i get the same result.…
-
CCNA Study Resource
[FONT=&] This is a great resource to add to your CCNA studies [/FONT]CCNA 2015 200-120 Video Boot Camp.
-
Old Boson ICND1 and ICND2
Hey All, So I realized that I still have access to my Boson tests 640-822 and 640-816 Boson's that I can still download and use from a little over 3 years ago. I know that we are now on V2 on these tests and was wondering if these are still good to use to study off of, or will it be a waste of time? Wireless I will have to…
-
Passed ICND2!
This is an update to the "ICND2 facepalm (Fail)" thread, today I passed, I am so relieved after being defeated in our first match but he was no match for my nasty hooks to the body that ultimatley put him down on the canvas. My score: 933 Lan Switching Technologies: 91% IP Routing Technologies: 100% IP Services: 100%…
-
Cisco Wic 4ESW 4 port 10/100 module
Guys, I'm getting back into my lab and I bought three of these cards back in Sepetember but for what I'm not sure. I think I was going to use in the Cisco 2600 routers and one of them in the Cisco 1721 router so that the one 10/100 fast ethernet (FE) port on the 1721 would go directly to my HP Procurve. But ICM came up and…
-
Access to a Nexus
My job had a Nexus 5020 laying around, i then go ahead and ask if i can go ahead and play with it before they send it back. So i finally get some live equipment, i console into it and nothing comes up WTF!!, been trying for 2 days, i console into a router comes up immediately so i know the cord is working, anyone know what…
-
Extended ACLs - Question
I'm currently using Todd Lammle's book to study for CCENT. On chapter 12 he's explaining how to create an extended access list for the topology. The configuration it's done with these three statements to allow Host B only HTTP access to the Finance Server Lab_A(config)#access-list 110 permit tcp host 192.168.177.2 host…
-
Passed ICND2!
Nothing beats that feeling when you look down on the screen and see "Congratulations..."!!! Thank you to everyone that helped me along the way!
-
CCNA in 60 Days?
Has anyone successfully used the book CCNA in 60 Days by Paul Browning to pass the CCENT/CCNA? http://www.amazon.com/Cisco-CCNA-Days-Paul-Browning-ebook/dp/B00IY5FP2G/ref=sr_1_1_twi_2?s=books&ie=UTF8&qid=1420607610&sr=1-1&keywords=ccna+in+60+days
-
subnetting question
1. Given the following host IP addresses 172.16.20.36/28: (i) What is the subnet mask (in decimal) for this network? (ii) How many bits have been borrowed to create this subnet? (iii) What is its network address of this subnet? (iv) What is the network broadcast address (v) What is the usable host address range for this…
-
CCNA Difficulty? (vs Microsoft)
I know that the Cisco exams are not a walk in the park, but are they as ridiculous as the Microsoft exams? Example: I sat for the Windows 7 70-680 a couple of years ago and royally failed. I had studied hard for it, but there was a lot of questions that were not covered in the book I had or the CBT's I used. Will i have…
-
CCENT Exam in 1 Day. Lets do it.
Taking my CCENT exam for the 2nd time tomorrow on 1/5/2015. I almost passed the last time with an 801. I have focused on my weak areas and have been reviewing everything from the CCNA in 60 days book along with Boson and Transcender practice exams along with live equipment and Packet Tracer. Lucky for me it is at 6pm at…
-
Router(config-line)#login% Incomplete command.
Router(config-line)#line vty 0 4 Router(config-line)#password cisco Router(config-line)#login % Incomplete command. Router(config-line)#login ? authentication Authentication parameters. ctrlc-disable Disable CONTROL-C during login. what I do wrong.. please help
-
CCNA Mnemonics or other crafty ways to remember.
Per Wikipedia - A Mnemonic is "A device such as a pattern of letters, ideas, or associations that assists in remembering something" Please add any you have made or know so we can start a collection to help everyone! Spanning Tree: Spanning tree cost chart: 10mps - Cost 100 100mbs - Cost 19 1gbs - Cost 4 10gps - Cost 2…
-
Passed CCNA Security 640-554 Exam
Hi all, Passed CCNA Security (640-554) with score 950. Passing score 804. Material used-Official cisco book, CBT Nuggets videos and 640-554-IINS - CCNA Implementing for Cisco OS Network Security Exam (IINS) – Exam Prep App from AppStore By Visar Jusufi Now we're moving on to CCSA and CCSE. 2 new drag and drop questions.…
-
CCNA Certification Expiration
Can I take CCNP exam even if CCNA is expired?
-
Passed Network+, How much more difficult is the CCENT?
I just passed the Network+ test today and am prepping for the CCENT next. I know it will be heavy on subnetting and labs but I was just curious how everyone thought it compared to the Network+ test. I have the Cisco CCENT/ CCNA books from school, pearson network sims and flash cards as my prep. Any other suggestions?
-
ICND2 facepalm (Fail)
Having read a book and some other resources and performed some light labbing, I decided to take the exam, I failed. And failed miserably. 722 was the score, needed 825 to pass. Now, by my calculations I only needed to roughly answer 6 more questions correctly. I got caught up on a simulation and ended up burning way to…
-
I failed the CCENT today :-/
Whats up guys Today I failed the CCENT by 3 points. yeah. 3 points. I did the Network+ about less than 6 months ago. This "new" ccent, is pretty tough. I kind of feel like my college classes i took for this were a waste of money really, had a bad teacher but im not blaming it on him, i failed because of me. Im having a…
-
CCENT study
Hi Guys, I'm going to make a thread for me and just post my questions in here as I'm studying and cruising along. Right now I'm having trouble with keeping more than 1 vlan from automatically shutting down. So far I've managed to connect the 1721 to my home network and then connect the serial links to the two 2600's and…
-
Is 7 months enough time?
Is 7 months enough time to complete the CCENT and CCNA security exams? I have never studied for anything Cisco, but I do have Network+ and Security+. A friend of mine at work will give me his video set from CBT Nuggest. He has 3 video sets. The one for CCENT, CCNA Security and I thing the other is a lab series. The reason…
-
CCNA Course Question
Hey everyone. I was planning to sign up for an online CCNA course and was wondering if I could get some advice or opinions. I'm thinking of signing up for a course offered by George Mason University that lasts 24 weeks and is $195 (which i think is pretty low). It also offers a 60% discount if you get 75% or more in the…
-
Access-List with NAT
During my study I've run into a NAT lab with the following configuration, RouterA(config)#int l0 RouterA(config)#ip address 10.1.1.1 255.255.255.0 RouterA(config-if)#ip nat inside RouterA(config)#int l1 RouterB(config)#ip address 10.2.2.2 255.255.255.0 RouterA(config-if)#ip nat inside RouterA(config-if)#int Serial 0/1/0…