-
It's Official
I'm taking the ICND1 exam on Friday (Jan 3rd). I can do subneting in my head, for the most part, and going over practice tests and official Cisco flash cards. Any last minute advice before the test?
-
GNS3 not working at all
Guy, Ok I am in a bind and I have run out of ideas. I have my test next Saturday and I Want to work on some labs, but have run into issues with GNS3. No matter how I try to open a console all I get to is "Press enter to get the Prompt." I have tried on Windows 7 64 bit and also Ubuntu 64 bit virtual and fresh install, also…
-
VICs on 2911
So I'm about to embark VIC2-4FXO 4PORT and VIC3-4FXS/DID 4PORT on CISCO2911/K9. The Cisco documentation on installing cards on ISR looks general. Do you just fit VICs into 2911 after emptying the slots and turn the power on? Do I need to do anything special on 2911 or is just plug-and-play? Thanks.
-
New Guy looking for ccent/ccna buddy up!
looking for some buds to share some frothy suds a la ccna talk/chatter/"studs". Looking for those seeking OSPF or Only Shortest Path First "program"! strike now if you want to partner up serious candidates hopefully who have taken academy or equivalent and maybe some IT experience. adults headed for passing exam quickly…
-
ICND1 discount voucher from the netacad courses ?
Hi Not sure if this is the right place to ask but I have no better suggestions where to ask. A couple of weeks ago, I finished a class doing the CCNA program through netacad. It's the course deivded into 4 CCNA parts. I have taken part 1 and 2, and it might be the right time to take the ICND1 test. However, when some of…
-
Need this for Network Labs!
First-person...programmer. Wow, would I love this for Cisco studying!
-
Day 1!
This will be Day 1 of studying for my CCENT certification, and then moving on to my CCNA certification. I am starting out with a bare minimum of knowledge in networking, and hope to get the CCNA in four to five months. I am using Odom's Official Cert Guide for the 100-101, and plan to spend a month getting through the…
-
Which APs for CCNA-Wireless?
Which APs are suitable for WLC-2504? Is any Aironet series compatiable and ready to go with WLC-2504? Thanks.
-
Voice Path
Good morning. My employer wants me to be a Cisco Voice guy and I was wondering what path to take. From my understanding: CCENT: 640-822 (ICND1) CCNA: 640-802 (CCNA) -OR- 640-822 (ICND1) AND 640-816 (ICND2) CCNA Voice: 640-461 (ICOMM) My question is do I need (640-822) AND (640-822) in order to take the (640-461)? Is my…
-
Cisco AIR-CT2504-5-K9 instead of 2100
I see people recommending at least 2100 as a Wireless Lan controller. Would Cisco AIR-CT2504-5-K9 be good enough for CCNA wireless purpose? and a couple of APs? Thanks. [h=1][/h]
-
i know that this question ask by many but i need help
so im thinking about learning ccent and im not sure what are the subject i mean the exactly each subject where i can find it i know these : subnetting lan ipv4 vlans arp ipv6 i need to know more????
-
CCNA Video - 200-001 VIVND
Hi, Has anybody done research on what official training/guides are available for CCNA Video certification? This is something I would like to get into after CCNA Voice. CCNA Video - IT Certifications and Career Paths - Cisco Systems 200-001 VIVND - IT Certification and Career Paths - Cisco Systems…
-
Lab exercises for ICND1 and ICND2
Hello all, I am currently working through the Odom book for ICND1 and I am wondering what is a good source for LAB exercises for both tests. I would prefer exercises that tell me what the end results need to be as opposed to ones that give step by step instructions and commands. Thank you all in advance.
-
Getting back into it after a long break.
Hi guys, I passed my CCENT (old version) around august last year. Ive had a bit of time off from studying and tried to get back into it and finish off my CCNA last week, but I am struggling with the ICND 2. Any advice about getting back into it after a break? I have the Llammle CCNA (new version) and a few different video…
-
Best Book For CCENT then CCNA
I have 4 1/2 years of experience in Help Desk/ IT Support Specialist. I currently work with alot of cisco equipment. Yet I do not really do anything with it. I have been notified that I need to achieve my CCNA with in the next 6 months, and will receive quite a raise once I do. I completed the Cisco Academy back in 2007…
-
Study Material for 640-554 IINSQ
Hey all, I've been working on Microsoft certifications and I'm interested in the CCNA: Security certification (640-554 IINS) so I was wondering who has taken it, and what they used as a self-study? Sybex? CBT? Etc.. Thanks!
-
Should I study a CCDA/CCDP ?
Hi, I'm CCNP R&S certified, should I study the CCDA/CCDP ? will the CCDA/CCDP add value to my CCNP and get me a better job ?
-
CCIE Voice best route?
CCIE Voice best route? Last year I finished my MCA. I am intrested in networking field and came to know about voice field from one of my friend and now I want to pursue it. Am studying at a famous networking institute in Banglore. I just finished my CCNA R/S (1-month course not certification ). My aim is to answer CCIE…
-
Default Routing Lab - cannot ping google.com
Hello I am a newbie at this so please forgive my question if it seems really simplistic. In the Certification Kits Default Routing Lab, we have configured the router as directed and have connected the internet to the router. However, when we get to the part where we are to ping an internet address such as Google we always…
-
cable issue
i was at a friends house the other day and he had another guy wireing a room with ethernet cable. he has 2 pcs there neither of em is getting an ip address from the dhcp. plugged in my laptop and got an connection to the internet. plugged in his laptop, got a connection to the internet. both pcs worked finde in other…
-
Flash cards?
Is there a good selection of flash cards available for Icnd1 and 2? I would enjoy some to supplement my studies, and thought i would come here for suggestions. :)
-
mW <-> dBs conversion mastery
Has anyone mastered mW <-> dBs conversion? With the OCG not being around yet, I'm struggling to find a good source to learn about this. Thanks.
-
Netacad for ICND1 100-101?
Hi evereybody! I'm learning on Cisco Netacad but it's for ICND1 640-822 Anyone knows if Cisco will update Netacad for ICND1 100-101?
-
Router for CME/FXS/FXO
Does anyone know of any Cisco router with CME and FXS/FXO ports that has not been announced as "End of Sale/Support" notices? Preferably lower around 1000~2000s. Other than "Cisco 2811 Router." Links from eBay and Amazon welcomed. Thanks.
-
Why can't my switch1 see my changes in vlan information from switch0 (or 2)?
Why can't my switch1 see my changes in vlan information from switch0 (or 2)? I can ping, telnet to both switches and when i change one interface fastethernet 0/1 down to up i can see them both change simultaneously, however my switch1 isn't showing the same thing as my switch0 when I do show vlan brief Switch1#show…
-
Which of these two labs should I grab?
Hi everyone, which of these two labs is the best one to grab. Ebay: Complete Cisco CCNA & CCNP Certified Network Professional Home Lab Kit 15.1 or Advanced CCNA 200-120 Starter CCNP Kit III Thanks In Advance!
-
1721 3 router redundancy setup
Hi all, For my CCNA R/S lab setup I have 3 Cisco 1721 routers and I would like some insight as to the best way to connect these routers together for redundancy. All routers have 1 T1 Serial WAN WIC module installed. So does all routers need 2 of these WICs, or am I lokking at this wrong? I am in the process of ordering the…
-
Odom's 200-101 book, possible error?
Hi everyone, I think I found an error in this book that isn't in the official errata, and I'd like some other opinions. On page 366, it's talking about the speeds of T-carriers, and the sentence says: 'Basically, at slower speeds, you get any multiple of 64Mbps, up to T1 speeds' Correct me if I'm wrong, but should that not…
-
prtg network monitor
Dear all, Be so kind to help me out with a step by step guide or video link to learn about how to configure PRTG NETWORK MONITORING that can be accessed through a web interface. Regards, Givenchy
-
ACL to block icmp
Hi, I have a topology with 2 vlans and router-on-stick, i was playing with ping and decided to do a icmp sweep, i was able to get the ip address of all host's from the vlan i was pinging. I try to block the icmp ping with a ACL, but no success... My access-list is as follows, - access-list 101 deny icmp any any and then on…
-
CCENT/CCNA Strategy Questions
I passed the Network+ last fall and now I'm under the gun to pass the CCENT/CCNA/CCNA Security by the end of April. I had some life events occur which compressed my timeline. I'm currently halfway through the CCENT CBT Nuggets videos, I've done a few of the Cisco Labs and I've started reading Wendell Odom's book. I'm…
-
Watching ICND 100-101 cbt nuggets port security
Does he not go over port security for protect and restrict? at around 19:25 he will touch on the 2 but doesn't go back thoroughly and describe them
-
Need Help w/ Advanced CCNA 200-120 Starter CCNP Kit III...
Hi guys, I am trying to figure out what is the best setup for this lab kit "Advanced CCNA 200-120 Starter CCNP Kit III". There are upgrades that can be done but man is making this lap cost way to much. XD However; I need to have it ready for CCNP after I am done with the CCNA. I want to use all the features needed for the…
-
Need a bit of help here please!
Hi all, I'm very fresh at most of this CCNA stuff, however I have 2 Cisco 1721s and 2 2950s. I'm trying to do this lab/exercise/test I found here , however I can't ping either routers ethernet port from within the other routers console. I can ping the opposite routers serial interface with an successful result. I have both…
-
NAT over Frame Relay Point To Point - Router on A Stick & EIGRP
Hi I have configure the following for Frame Relay/NAT/Router on a Stick & EIRGP. The networks for the Routers are: Router 1 internal 172.16.0.0/22 external 37.18.216.0/22 Router 2 internal 172.16.4.0/22 external 46.59.108.1/22 within the two networks i created a router on a stick with a subinterface fa 0/0.40 (R1 fa0/0.40…
-
About VLAN
I've a question about VLANs.... When hosts transmit frames inside the vlan, are these tagged (by 802.1q protocol) or not? I think that tag are only used in trunks, for recognize the different destination VLAN; frames are untagged when flows on the access port of the vlan. If this vere true (frames inside a VLAN are…
-
Hsrp
Can anyone tell me if it is possible to use an HSRP setup to utilise a backup link? I was just watching something about EIGRP and 'unequal cost load balancing' so an idea popped in to my head; I have a 20mb fibre link and a primary router with HSRP and a 10mb EFM link and a secondary router with HSRP. Both spoofed to be a…
-
Is it actually necessary
Hi all, I'm looking to eventually work to earning my CCNA and will start by taking the CCENT cert exam; I have purchased this ebook below: CCENT Study Guide: Exam 100-101 (ICND1) by Lammle, Todd (Jul 23, 2013) As you may know, it allows for the use of the IOS CCENT Simulator, would this be sufficient for my studies? I was…
-
Passed ICND1
O guess its my time to post that I pass the first exam of Cisco cert exams. Scored an almost perfect result, but I was still very nervous throughout the exam even of I did study for 2 months every day. Will start to study for ICND2 today hoping to take it till the end of March, you think is a realistic approach? I heard…
-
ICND1 pass!
Today I've passed my ICND1 exam, with a score of 947/1000! Now I'm ready to study for CCNA and so on :D Thanks to all for your help
-
What are some things I can buy to help with my studies?
Hello all, so i just got a job and will have money coming in finally. Sadly, it has nothing to do with the IT industry(it's just a warehouse job). Anyways, currently what I have is this: - Cisco classroom with actual equipment(routers, switches, etc) so im good on lab equipment for the next 4 months - Wendell Odom Book…
-
Which Path CCNA-> CCNA Sec or CCNA-> CCNP
Hey Guys, I am about to purchase this month hopefully my Cisco Lab from Ciscokits.com and I was wondering what route is a better route to take for a Lab. It will help me determine the overall cost for the lab I will grab. Thanks!
-
NIC Problems
This isn't exactly exam related but maybe the conversation will help others understand networking somehow. Has anyone had an issue where a NIC would communicate locally but not with the router? I've been troubleshooting a problem this morning, settings all appear normal but it just will not communicate with the router.…
-
What IOS Version is used for CCNA Exam?
Hey guys I am wondering what IOS is used now for the CCNA exam and CCNP? I will be purchasing a lab here soon and need to know what version IOS I should get in case I need to update the hardware upon purchase. Thanks!
-
CCNA or ICND1
Hi guys, I get a question guys, which one one is better if I'll take the ccna (200-120)exam or separately (ICND1-ICND2) Thanks.
-
HDLC does not perform Error Recovery......?
Dear Sirs.......i have one question about the Chapter 4 of Cisco Press...."Fundamentals of Wan"...in page 90 of this book its written that HDLS does not perform Error Recovery. my question is this that HDLS is data link layer protocol and on the top in Transmission controll protocol there would be TCP or UDP am i right ?.…
-
Books for MPLS & BGP
Hello, all, I've been working for a Managed Voice & Network Provider for a few months. I'm Tier 1 in the NOC. And, we primarily use BGP & MPLS. I don't know too much about this but I'm trying to learn so I can move up. I'm working on my ICND2 at the moment. But, are there any recommended books or anything specific to MPLS…
-
Telnet/SSH from different interface vlans
hi VLAN 5 Switch 172.16.4.0 /25 255.255.255.128 VLAN 10 Left Pc 172.16.4.128 /25 255.255.255.128 VLAN 15 Right Pc 172.16.5.0 /25 255.255.255.128 if I have the following vlans , is there a way to telnet/ssh to the switch from VLAN 10 and VLAN 15 , the switch is configure interface vlan 5 ip address 172.16.4.20…
-
Interview Questions asked for CCNA
Hi , Below is the set of questions asked to a friend of mine in his recent interview for a opening for CCNA certified network engineer .If anyone know answers for below questions please feel to share it* Which port u will connect to router or switch to pc to monitor and track the switch statistics? * You have 2 PC’s in the…
-
Anyone in the LA area up for preparing for CCENT/ CCNA?
Hello All, I was wondering if there's anyone on here who lives in the Los Angeles area who are willing to meet up for studying for the CCENT\CCNA? Or if there's anyone out there willing to teach and of course get some extra bucks for the help.Thanks and let me know. I really planning on getting my cisco cert this year.
-
Layer 2 switch won't forward traffic
I have a very simple question - How to get my WS-C2960S-24TS-L switch to forward layer 2 VLAN traffic across a trunk port without a SVI or ip routing configured. I have a Router set as a VTP server, and a switch set as a VTP client connected over a channel-group dot1q trunk link. The switch has no ip routing configured and…
-
Inter-VLAN routing PT Lab
Hi all, I've started doing some practice labs from scratch and decided to have a go at an Inter-VLAN routing lab to get some practice. Would it be possible for someone to look over the configs to ensure everything looks as it's supposed to be. It seems to work, but I'm not very confident that it's correct? It's not too…
-
Dead 2950?
Hi everyone, I think my 2950 is dead, but I need some input. The switch isn't accepting any input from the keyboard, at all. It's been rebooted a few times, but I'm not able to type in any commands. The same console cable works perfectly with other 2950's and my 2611's, but nothing with this one particular 2950. Should I…
-
When one call manager is not enough, what do you do?
You add a second one of course :) To learn about dial peers Basically trying to figure out the relationship or connection between the two branches, right now I just have two 2811 connected together using using fe0/1 interfaces. fe0/0 are trunk ports , running different vlans/subnets for the two 2 branch offices.…
-
putty and usb to serial converter
Hi guys im having a problem with putty and my new usb to serial converter. im using the settings i would use normally Speed - 9600 Data Bits - 8 Parity - none Stop bits - 1 Flow Control - none It brings the screen up and the router boots up in it,but once all is loaded up i cant enter any commands ? It's like the keyboard…
-
Subnetting with Jeremy Cioara method
Hi, I like Jeremy's method for its simplicity as I dont enjoy mathematics much. I just stumbled upon a question which as appears to defy his logic of subnetting, ere's the question, What subnet does host 172.28.188.66/27 belongs to? This IP is of class B network and its original subnet mask is 255.255.0.0, that constitutes…
-
Dead 2650 switch
Ok i guess i took a power bump last night I have 2 2650 switch down . It powers up but i cant console in ...it wont respond to anything. The led sys is amber and blinking. The other 3 routers and the other switch is fine I can console in so the console cable is good its just the two....I have tried to hold the mode down…
-
Can't get PSTN Simulator to take calls
Update: 911 is working now but I'm not getting sound which makes this a MoH issue now. I'll get a 10 second delay of no sound then the off-hook sound. Tells me I need to figure out how to get MoH working.
-
Connecting modem to cisco router?
I'm planning on installing my ccna home lab and I was wondering how can I connect my modem to the router? Do I use the AUX port? Or do I buy a module for ADSL? I'm new here and this is my first post. Thanks in advanced for answering!
-
12.4 and 15.o Cisco IOS
I am sorry if I am asking a newbie question but I just did a show version on my equipment and I want to make sure I am looking at this correctly. Do I have IOS 15 or do I have IOS 12.4 ? Since getting new equipment I am starting to learn alot of little things I never noticed before using Packet Tracer. Please advise. Cisco…
-
Ideas for lab hosts?
Anyone have any ideas for lab hosts? I was thinking, I could get 3 cheap desktop pcs with xubuntu or something on them and kmv switch?? What is the cheapest way I could go about simulating hosts?
-
Subnetting help
Hello, I have pretty much got subnetting nailed down but I struggle working out one aspect. When you are working out how many hosts and subnets you can create from a particular ip and mask I can get the hosts, but not sure how to work out the subnet - could someone please help explain? For example:* How many hosts could…
-
Labsim
Has anyone used Testout's Labsim to train for their CCNA? How well did it work?
-
Is this a typo in Lammle's 100-101?
Page 332, figure 8.1. How is this network even possible? I even tried to replicate it in gns3 and all I got was overlap errors. But then Lammle proceeds to 'show ip route' supposedly from this network?
-
CCENT Training vides
I recently figured out I learn a lot better by watching videos and sort of combining it with my reading. Now, before I shuck out some dough, does anyone have any good recommendations for training vids? I was looking into CBT nuggets but I think it was like $99. I did recently file for my tax returns :) so I guess money…
-
Vlsm
Hi Gurus,I am stuck with this VLSM question where given the base address is 10.1.0.0/23:Required: 1) 6 hosts x 7 subnets2) 2 hosts x 6 subnetsCan anyone cast some light on me especially the second network?Thanks
-
Cisco WS-C2950-24
Hi, I'm thinking of purchasing a switch to practice for my ICND1, and I was wondering if the WS-C2950-24 would be a good choice. Thanks. PS. I'm on a very tight budget, and can't afford to buy a while lab.
-
Hi there!!!
hi, I'm Marcello From italy, i'm studying CCENT. This forum is amazing, there are a lot of information that i read. Thanks at all. I'm going to realize a cisco lab for CCNA, i'm looking for on ciscokit but i'm confused. What kind of lab do i need for IICND1 and ICND2 because there are a lot of model routers and switches.…
-
Help, quick Q?
Hi, I'm troubleshooting on a cisco router as our network is very slow. We have 3 fast Ethernet connected and 1 dialer(ADSL). The show ip int brief command tells me what is up and down but no IP addresses of each interface apart from the Dialer. How do i find out the mac addresses connected to each interface? I can use the…
-
Am I completely out of luck?
With school, my family, and the new job I completely forgot that I had the ICND 2 scheduled for the 6th of this month. It has me listed as a No-Show on the pearson vue website... Is there a way to actually reschedule the test I missed or do I just have to cut my losses and pay for another exam?
-
Scenario's for labs
Hi all, Great forum by the way. I've been 'lurking' for the past couple of moments. Good for motivation when I get the odd day where I wonder why I'm spending all this time studying. Just reaching the end of the icnd01 book and would like to spend more time getting 'hands on' with the technology using Packet Tracer. I've…
-
IPv6 Question - EUI-64/Auto-configuration
I have just began looking at IPv6 for the first time and have some questions around EUI-64 and auto-configuration, which are both listed on the 200-120 exam topics. My understanding of EUI-64 so far is that this allows a device to assign itself an Interface ID, by using its own MAC and padding it with an extra 16 bits…
-
Ip route Static (Next Hop)
Hi guys, for the command, ip route 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.1 is the next hop. Will the ping still be successful if 192.168.1.1 of the OTHER router is in a different vlan? How does the command know that 192.168.1.1 belongs to other vlan of the other switch?
-
what is the data link that is supported by IPv6???
anybody here can help me???
-
Equipment 'kit' question
I am looking to start on my CCNA. Is this a good kit to start with? 1x Cisco 2511 router AS2511-RJ 2x Cisco 2621 32768K bytes of processor board System flash 2x Cisco 2610XM 49152K bytes of processor board System flash 3x Cisco 2950T- 48-port Switch 1x Cisco 2900XL 1x Cisco NM-4A/S Module 3x Serial DTE/DCE Cable 1x Cisco…
-
CCENT ICND1 Pass
Passed the ICND1 this morning (894/1000) and I am excited to get going with the ICND2. Thank you to the people and information of this forum.
-
Fairly new to networking, but job is enthusiastic about getting me a CCNA?
A little bit of background! I am Brent, 23, and I have worked in the computer field since I was 21. I have worked with computers on my own time before that, just doing a little small business of my own. Then I got hired in a mom and pop computer shop, and then about a year and a half ago was hired as a Help Desk Associate…
-
Icnd1 pass!
I passed ICND1 today with an 854! Not as high as I would've liked, but a giant weight has been lifted off my shoulders. I used CBT Nuggets, Odom's book, and some labbing with equipment, gns3, and packet tracer. I took a handful of practice tests with transcender and Odom's book, but I felt like they were somewhat tougher…
-
Rack mount advice for home lab
My lab of Cisco/Juniper devices is getting larger and I am thinking of getting a rack mount. Anyone have good experience with any product that is sturdy and cheap? I have devices that I'm not sure about being wide enough to fit the rack, not unless that's a problem. Also, I have some metal piece I got when I got a Cisco…
-
Question about CCNA Security path and how useful just the NA Sec is
Wondering how heavily the CCNA Security covers ASA NAT'ing and VPN configuration, as that is my main interest in studying it at this time for my job role of setting up / troubleshooting specifically VPN's on ASA Firewalls. Not really looking at going for the CCNP Security any time soon as I work more heavily on Routers and…
-
What kind of jobs/salary can be open with a CCNA/CCENT?
I am 23 years old and am just so miserable as I cannot figure out what path to take in life. I've tried going to college for different paths on and off and never seem to be able to keep in it as I keep changing my mind on what path to take. I can take a course to have A+ and CCENT, and I was going to do this. However, can…
-
A few home lab questions
I'm going to graduate in May, with a degree in network administration and I want to build a home lab to study for the CCNA. Before coming to this forum I came across this video by CBT Nuggets, he recommends 2 routers and 2 switches. I also read the sticky at the top of this forum and saw that it recommends 3 of each. I'm…
-
STP - Changing link speeds & affecting topology
As the topic suggests, can you completely change your STP topology by setting a link that was a '19' path to a '100' via the speed? So I set speed at both of the links as 10Mbit (they were a-100), how does that affect the port cost in the STP process? It doesn't, according to my Boson lab. Is this expected behaviour or…
-
Newbie CCENT question
Hi Guys, I'm halfway through the CCENT using Packet Tracer, and I'm working through a few of the labs in Todd Lammles book, I have 3 routers and I have been struggling to setup both Name resolution and static routing.Working through the book, I can enter entries for both, but I haven't seen anywhere that says anything…
-
Link flap / Err-disable when plugging phone into 3550
Just got a 7940 in for my lab, and when plugging it into the 3550 I have, the port light blinks amber until it eventually stops and gives the following error: *Mar 1 00:21:14.267: %PM-4-ERR_DISABLE: link-flap error detected on Fa0/47, putting Fa0/47 in err-disable state The weird thing is that the 'show power inline'…
-
Is this the new order for the CCNA exam?
Hello guys, I'm planning to use Pluralsight to study for my CCENT & CCNA later on this year, can you please confirm if the following order will cover CCNA? Thanks in advance 100-101 (CCENT) 1. http://pluralsight.c...ntro-networking 2. http://pluralsight.c...r-switch-config 3. http://pluralsight.c...a-routing-vlans 4.…
-
network administrator exam
hello guys, what are the exam for become network admin. what is ccna,ccnp? nd wht book should be refer for that. plz help me
-
Asking for opinions on my potential voice lab
Asking for opinions on my potential voice lab. I have a Cisco 891 as a DHCP router and a couple of switches for VTP. I have a router that caught my eye as Cisco C2901-CME-SRST/K9 2901 on…
-
IPv6 on ICND1
Hi! I'm studying for my ICND1 exam, the 25th of february i'll do the test. I've a question for those who have already done this exam; How much of IPv6 there is in it? Should I study well IPv6, or it's advised to study better other arguments, like subnettings-ospf-etc? Thanks... -14 !
-
Testing Center Closed Because of Snow
I had my ICND2 scheduled for today. However, the testing center is closed because of the snow storm in my area.What are the avenues I should go about to get it rescheduled? (Surely, I won't have to pay again, right?)
-
Outbound Discards
Im getting discards on a clients 4500 l3 switch. The interface is gigabit set to 1000mpbs full duplux on both sides of the link. The other end is a sonicwall firewall also gigabit. Here is the output of some of my commandsLVCC4507#show int gi3/16GigabitEthernet3/16 is up, line protocol is up (connected) Hardware is Gigabit…
-
Help IP Telephony With router On A Stick
Hi I did a router on a stick configuration and I have a problem not sure how I can configure the IP Telephony Service in order the ip cisco phones to get a number. I did the configuration and all the end devices are getting an ip address from the dhcp server. Thx ///////Router Configuration R1#sh run Building…
-
Cisco CCNA Security Approved as Department of Defense 8570.01-M Certification
Link: Cisco CCNA Security Approved as Department of Defense 8570.01-M Certification - MarketWatch
-
Pride
So, this is a shout out to all of you who may let your pride get in your way. In 2011, while I was in Iraq, I took on the task of trying to achieve my CCNA. I took the two test route and completed a test a month until I was certified at the end of September 2011. It's currently 2014 and I'm in an Advanced Leaders Course…
-
Passed ICND1 today
I like to thank you guys on the TE for all the information you put out on the forums. Today I passed ICND1 100-101 with a 907/1000 and some of the study methods you guys provided was very helpful.
-
Weird AnyConnect/iPad issue
Had a very odd situation here, posting in case anyone else ever runs into it.. We use Good for enterprise, and have iPads connect through Anyconnect to access our internal network for an RDP application. Basically it's this: User A's UDID: 1234... User B's UDID: 5678... When User A connects to AnyConnect, DAP trace shows…
-
Completion of training certificate to diploma CCENT ?
Hi, I had passed Cisco Discovery 1 and 2 final exam + practice test. For the moment i have "Completion of training certificate to certification" in my Netacad Account. How can i have the "official" CCENT's diploma? Best regards
-
Experience at New Horizons
I decided to find a forum for support on getting a few new certifications and I think I found the right one. I joined New Horizons through the Workforce Initiative Act in a plan where I'll get certified in A+ 2012 (just got it!), CCNA, and MCSA. I was ecstatic. Unfortunately, I'm not so ecstatic about this school. I wonder…
-
Life after MCSA 2012
Hi Just about to complete my MCSA 2012, was thinking to do a Cisco cert next. Any recommendations?
-
How can I find out which routing protocol is being used when asked to compare FHRP?
How can I find out which routing protocol is being used when asked to compare FHRP? Is there a difference that can be noticed with Show Standby, Show VRRP , and Show GLBP? I can't seem to wrap my head around what is different..