-
BCMSN questions for you guys that just passed
I got BCMSN test next week, what practice tests that you have been using helped you the most? I have so much material to study from I am getting to that anxious state where I need to like concentrate...
-
Passed BCMSN
I passed the BCMSN yesterday afternoon . Test was challenging and there were more questions on wireless than I thought there would be, but I made it. Now I just wait to hear back about the TSHOOT beta and then my CCNP journey will be complete. Perhaps now I start my final leg of the journey to CCIE....
-
Serial errors - LOTS of 'em!
OK, so we're 1000% sure it's a line issue (already replaced WIC, router, and internal cabling) – still going back and forth with the carrier. Just out of curiosity – Any tips from the output below on specifically what could be wrong? Serial0/3/0 is up, line protocol is up Hardware is GT96K with integrated T1 CSU/DSU MTU…
-
role based views
Anyone play around with creating cli-views? I'm having a problem getting started. I've tried both my router and switch and both lock me out when trying to enable views. Both devices have "aaa new-model" enable. With local authentication. "aaa authentication login default local" I've created a user account with priv 15 like…
-
12.4 and 12.4T EIGRP and IPV6 huh?
hey guys was reading wendell odem site on new CCNP and ipv6 not being supported in IOS 12.4huh? I always thought Ipv6 worked with EIGRP and OSPF and RIp as long as the router had 12.3-12.4 and had the command ipv6 unicast-routing? what is the dilemma with 12.4 T and EIGRP/IPv6 and 12.4 not having it??? thanks
-
Path to CCNP
Will this path work: BSCI + SWITCH + TSHOOT = CCNP I'm gonna take the BSCI tomorrow and if this path works then I will just do the new SWITCH exam instead of rushing the BCMSN since I don't have all the equipment yet.
-
Question??
How far will this equipment take me? And what equipment do I add for it to be a ccnp lab? Thanks! 6 - 2950 Switches 4 - 2900XL Enterprise Switches 1 - 3640 Router 1 - 3620 Router 1 - 2650 Router 1 w/wic 2T 1 - 2611XM Router 2 w/wic 2T 2 - 2620XM Routers 2 w/ wic 2T 2 - 2620 Non-XM Routers w/wic 2T 1 - 2610 Non-XM w/ wic 2T…
-
CiscoWorks device issue
Hey techies. We run LMS 3.1. We have recently replaced our content switches with ACE modules in our 6500's. For the first time, I am unable to manage a cisco device from CiscoWorks. In particular, I'm trying to backup the configs. I've created the archive job, and it continually fails. Today, in Device Center, I launched…
-
Nm-cids?
Hi, I am currently studying for 642-533 IPS, and I am considering buying a NM-CIDS for my 2611XM Router. It seems that my router is compatible, but I am wondering if it is worth the 400+ dollar price tag for such a device. After all, it is only IDS, and it is seems that it is gone from the exam blueprint. However, it will…
-
CCNP -30 & counting ...
I have until 18th June to complete CCNP, before my BCMSN expires. just BSCI/ROUTE to do, I have opted for ROUTE as I have done BSCI-801 in the past (now expired - ACRC back in the day too for that matter), so not much to be gained by trying BSCI-901 which looks like a different animal. ROUTE-902 appears more interesting &…
-
CCNP or bust.
I've actually posted a similar topic in the past, but I'm back again. I've been having somewhat of a dilemma lately and I wanted to get the input of you fine people. I've been "studying" for my CCNP for a while now. As in, I've been studying for BCMSN for a year, on and off. It would be the first exam I've sat for the CCNP…
-
Fed up with VUE
Some of you knwo I took my switch exam a few weeks back, about 20 min in to it the compuer froze up and I got a jarva script error on the screen. 10min of there IT unit fiddeling around and then being moved machines, I eventuly got back on with the exam 15 miniutes later and back at the start of a simulation I had been…
-
ONT Exam question
Hey guys, I was wondering if you have any recommendations for someone that is getting ready to take the ONT exam. Is the lab portfolio for this one worth purchasing? I plan to take the exam within the next two weeks. I've been studying for awhile now and want to get this one completed. I'm tired of waiting on my TSHOOT…
-
pvdm forboth fxs and fxo cards?
hey cisco peeps do you guys know if i was to put both fxo and fxs cards in my 1760 it will need a pvdm12 for each card or will one pvdm12 be okay for both cards? thanks
-
passed snrs 643-504
Passed SNRS 642-504 yesterday with 953 score, not bad.... For self-study i used the Student Guide but this is lacking in some areas compared to the exam blue print; * IPS V5 signatures * GET VPN * DMVPN * High Avail IPsec * FPM for these you can find numerous pdf's on cisco website, some of them very interesting... Did…
-
OSPF path fixing
In the digram below all the routers are attached to a shared segment. at the moment all know about the connected networks via OSPF and would currently talk directly to each other over a single hop. what I want to achive is if a user in network 192.168.1.0 sends a packet to 192.168.4.0. then rather than CAB1 user CAB4 ip as…
-
BCMSN - Passed!
Passed the exam this morning. Got 871. My advice would be to prepare for every topic, especially the main ones like HSRP, STP, Etherchannel etc. Just know everything, identify your weak areas and focus on them for a while. Basic advice for every exam really. Lab everything if you can and make your own more complicated…
-
CUCM external number mask
Still working my way through CIPT1 so I'm not sure if I haven't reached the right section yet. But in a single or multi site deployment is it possible to set the external number mask on a DN range instead of an individual DN basis? Site 1: DN range 1xxx DID range 92571xxx Site 2: DN range 2xxx DID range 93542xxx I know I…
-
my 2610xm router write protected huh?
I keep getting this I have it says I have 50331644 Isnt that like 50 mb for an image in flash? i mean 50,331,644 bytes right? so that is 50 million bytes so 50 MBright? or am i tired and not reading it right? my 2610xm doesnt have a flash slot in the front it is an older one but it says it is write protected? is there a…
-
Communications between GNS3 and PC
Hey guys, I am trying to set up a simple FTP server and have the routers in GNS3 access the FTP server on my PC just for playing around with archive and stuff. I found something kinda similar for setting up QEMU to download JUNOS using OPENVPN. I tried installing that and setting it up, but I am stuck now. I don't know if…
-
Callmanager 7 password recovery?
Hello. I set up a callmanager 7.0.1 server at home several months ago and can't remember my username/password for the web interface nor can I find my documentation for what I set up either... I am successfully logged in to the console. I believe the command to reset the username and password is as below: but I can't find…
-
configuring COR
There are 3 sites (A,B,C), site A connected to the public phone thru PSTN (PRI link). The case is how to restrict the incoming call from public phone number to reach only certain site using COR.... for example, incoming call from public phone number 7777 can only reach site B (not A and C), public phone number 8888 only…
-
Problems with DAI
I'm having problems with DAI on a 2960. After reloading the switch, windows clients are able to continue using their dhcp address. However a Linksys wrt54gl running dd-wrt invariably fails to reconnect. I can't even see a mac on the port until i reboot the Linksys. In the log I see this: May 14 17:46:06.688:…
-
gatekeeper command
I have been struggling to identify which IOS feature needs to be present to support the gatekeeper command so that my router can act as an H.323 gatekeeper to H.323 gateways. I attached a couple of images below of what I believe to be the likely culprits. Also, I have an image with "ivs-mz" in the name. Do all "ivs-mz"…
-
CCSP labs?
Does anyone have a suggestion for a CCSP lab manual or individual labs for the SNRS? I was thinking of creating some as I study for the SNRS but I was wondering if someone had any they would be willing to share.
-
QoS
I'm about to go take 642-642 (QoS). I used the following to study: 1) Cisco QoS Exam Certification Guide -- awesome book though full of errors unless you get a later printing (I bought the 11th printing!) -- read it twice, studied it for many more hours 2) Cisco QoS Quick Reference Sheets -- pretty good, I think they may…
-
PC Specs for GNS3 BSCI Lab
Hey Guys, You have probably heard this before but i would like to know what you are using for a GNS3 lab at home. Unfortunately i cannot afford real equipment now that im married. And the job is not paying enough. So im curious and wondering what would be a good setup. I read on network world how Odom sets up his. But i…
-
port acl cisco 2960
I inherited this ingress port ACL, but what does it actually do? What kind of multicast/igmp traffic is allowed? And why? This is for a residential broadband switch where the clients behind the port are to get public dhcp-assigned IPs. ip access-list extended CUSTOMER-PORT permit igmp any any deny ip any 224.0.0.0…
-
Back to Cisco!
Havn't played around with Cisco gear much since the end of January. Going to start preparing for the BSCI soon. Plan is to start off with the self study giude and TCp/IP vol 1 first. Move onto the official guide and finish up with CBT and Chris Bryant video lectures. Woohoo! Microsoft is not fun..
-
Internet access for external client
Guys Need some assistance on providing internet access at a branch site for clients. Any thoughts and suggestions welcome and appreciated We have a number of branch offices connected over ISP managed MPLS network, any-2-any. I am looking at implementing some kind of internet access at the branch offices, either wired or…
-
Multicast Issues
Hey all, I'm having some problems with multicast. My users use a web application to view real time stats and what not. You can see in the diagram at each facility there are 2 servers, a CCMS and CCMA server. The CCMS sends the stats to the CCMA through 225.0.0.1 and the users actually connect to the CCMA server through…
-
Command descrepancies
Cisco products(mainly switches unlike routers) tend to slightly differ in the commands when configuring various features for example in Cat 5000, the commands to set up and verifying are different from those in say 2900 series. I want to know how Cisco handles this in an exam say SWITCH or BCMSN. Does it stick to a…
-
SIP trunk > service provider
Hello everyone, I am currently working on CIPT1, and well though i know this isn't part of the course i am curious by nature and wanted to try set a SIP trunk to my service provider ( I currently have a working SIP account). Thing is i don't really find good documentation as to how to achieve this and Cisco makes it really…
-
SWITCH Scheduled[05/13/2010]
hi, So, my 3 months journey is slowly approaching to its peak. :) I do not know what to expect from the exam, but I feel confident in most of areas. I am lucky that we are just in the middle of our LAN re-design on work, so i am obtaining new skills on a daily basis. i`ll keep you informed ;)
-
route - really that hard?
I've just read the read up about route exam on ciscoblog Cisco ROUTE: Brace Yourselves! - Cisco Blog Is it really that hard? eep..
-
How to configure Multipoint PVC on ATM Subinterfaces
Hi All, I want to configure Multipoint PVC on an ATM Subinterface. Could anybody please help with the configuration on both ends ? Thanks in advance Ratnesh
-
Bridge-groups VS VLANs
Hey guys, I was wondering if someone can help clarify the fundamental difference between bridge-groups and vlans. They both seem to support virtual interfaces, and you can apply interfaces to each one as well as STP support. I do see that you can apply the BVI1 interface to a vlan which I am curious about. I configured BVI…
-
different Native vlans on the ends of trunk link...
Hello Guys... I am have a doubt in trunking. If I configure different native vlan on each ends of a trunk, will trunking will still work or not ?
-
OMG! ip source guard and DAI on 2960 lanbase!
I try not to use OMG in topics, but I'm so excited about this! I'm about to start implementing a 12-switch resedential broadband network. I was given a 3750 and 12 2960tc-l and was labbing on a 2960 trying to separate the users the best i can, testing different storm thresholds etc, when i noticed a process called "Dynamic…
-
BSCI passed... praise Jebus!
The beast has been slain, meaning it's beer o'clock for the next 24 hours. Whoever dubbed this one "Widow Maker" was absolutely right. If you're not sure about being prepared... you're not ready. I even got a sweet MODERATED question... a subject matter not covered in either the BSCI study guide, student guide, or my…
-
Loopback Call Routing In CME
I stumbled on this on the Cisco site - Interesting... Loopback Call Routing Loopback call routing in a Cisco Unified CME system is provided through a mechanism called loopback-dn, which provides a software-based limited emulation of back-to-back physical voice ports connected together to provide a loopback call-routing…
-
Mimicing the TSHOOT Lab
Hello, Would it be possible to create a mimic of the TSHOOT Lab using just GNS3? Basically, the VLANs and Etherchannels are the only thing I can think of that might be a problem. What exactly can those etherswitch cards do? Also, does anyone know the reason why they use /122 for the IPv6 masks? I assume there must be some…
-
Tshoot - 5/10/2010
TSHOOT became available last Friday so I've scheduled my exam for one week from today. I've used the two books from Cisco Press that are available plus the "Video Mentoring" disc. The labs on the video mentoring taught me nothing; I'm hoping that means that I'm ready to kick this tests @#$ and not that the disc was a…
-
CME over WAN
RouterARouterBRouterC ---192.168.0.25---192.168.0.26---192.168.0.29---192.168.0.30 RouterA phone 1000 RouterB phone 2000 RouterC phone 3000 ospf/eigrp routing apply Hi expert, I tried to configure so RouterA can call RouterC from the topology above. I can call RouterC with no issue from RouterA if I bind RouterC's IP into…
-
What cable is used to connect VWIC-2MFT-T1 to the wall jack
Do I use a regular RJ-45 cable? or these have special cables? Where can I buy them online?
-
Memory Error?
Just wondering if anyone has seen this error themselves? I received it when trying to apply IP NAT INSIDE or OUTSIDE to an interface. It seems like I am low on RAM in some way but that's kinda crazy since the router isn't doing anything. RTR-1811W(config-if)#ip nat inside% NBAR Error : Activation failed due to insufficient…
-
bcmsn - fail
The 1st lab killed me, I spent soo much time on it. I ran out of time and still had around 15 questions left to go result 696 hint, don't wast so much time on the labs ;)
-
Cisco switch with power over ethernet
Hi How would I know that the switch i'll be buying has a Power Over Ethernet capability? I'm trying to buy a couple of 3550 switch at ebay and want to make sure that it is at least PoE capable Also is this switch still good to invest for CCIE v4 as this is comming to its EOS/EOL in May 2011 EOS/EOL Announcement Cisco…
-
Switch to L3 Switch
Question: When building out a new network at what level do you change your layer 2 switches to L3 switches? Let me explain more. I'm having a had grasp of when when in a medium to large network do i do this or do i not need to do this at all. Picture this: You have edge routers serviing the WAN and internet. Then you have…
-
Wic-2t connection problem
I used a smart serial cable to connect two 2600xm routers, the interfaces keep flapping. I tried different clock rates on the DCE side without any success. I tried frame relay as well, no joy. I just bought the wic-2t cards and cable on ebay. Any i deas on what i can do or the cards or the cable might be faulty? when the…
-
Traceroute Question
Hi, I am dumbfounded over this problem i have. Whenever i do a traceroute using pingplotter (uses icmp not udp), i get replies from all devices in the path but not from the ASA and our perimeter router. I understand why the ASA doesn't show but i am confused why our perimeter router which is the next hop device after our…
-
CCNP Career Advice
Okay heres the deal, I am currently CCNA certified, and due to start my CCNP at a local Cisco academy in September. Im currently working in London doing Desktop Support, primarily Windows Desktop /Server and Mac support (but no Linux) . And have been doing so for 7/8 years In my current role Im not using any Cisco skills…
-
VWIC-1MFT-T1 question
Ok from what I understand the difference between a regular WIC-T1 and this one is the ability to support T1 dso channels that use fxo/fxs signaling right? So if I have an Adtran Atlas 550 with the 2 T1 PRI card. Can I configure fxo/fxs signaling on my VWIC-1MFT-T1's (Each one in a different 2621xm router connected to the…
-
queestion about cisco certification
hi every body am asking about cisco certification . it is enough without background certification of university in the workfield in US and euro .
-
how to use router as a switch in gns3 ?
hello guys, i am using gns3 for ccnp labs. i am using router as a switch. i have added NM-16ESW in slot 1 of Router 3700. it has got 16 fastethernet interfaces. it shows other configurations of switch. but when i try to create a vlan in it, it doesnt support this command ? does anyone know how to create vlans here ?
-
Cisco Unity Inbound IP Fax
Has anyone ever deployed this? We currently have CM 6.2, and Unity 5.0(1). I am wanting incoming faxes to hit a number..., then depending on DNIS be forwarded to a particular user via email (we are already integrated with exchange). Our gateway consists of pri's to a 2811 running MGCP. Cant find alot of good config docs,…
-
Cisco ASA 5510
I am trying to upgrade the IOS on the ASA from a USB Stick. Does anyone know how to do this in the CLI? :)
-
SS7 and General voip question
So I was watching the CBT Nuggets for 642 436 today and just wanted to see if this is true... Let's say that I want to start a phone company. I would probably run ISDN q.139 or Qsiq signaling between myself and my large customers (Some are VOIP (ISDN PRI or T1 CAS/CCS FXO & FXS signaling) and others PBX (Qsiq or T1 CAS/CCS…
-
Boson Exam
Hi, I wonder how similar this exams are compared to the real exams. I reached 810 points in CCNP switch exam. I see where my weak points are, so I will repeat some of the chapters. Thanks for answers BR
-
642-832 passed
Passed the TSHOOT exam today! Officially a CCNP now. The test wasn't quite as scary as I thought it would be, but at the same time it isn't a push over. Good luck to everyone else attempting it in the near future. Off to the CCIE R&S V4 cert guide now. Woot!
-
RFC's and MAC addresses to know for BCMSN
Right, so i've realised it would be a good idea to know all the relevent RFC numbers and MAC addresses for the BCMSN. Memorising them should be an easy few points. Does anyone have a list that they've done up as part of their study that they wouldn't mind sharing? If not, how about people post up the ones they can think of…
-
MPLS Books
So what is the general consensus on the best books out there to use in studying for the MPLS exam? I am planning on sitting BGP in the next week or so, and need to get an order in pretty quick. I am lucky enough to have grabbed a seat at networkers, so I think I will try to sit MPLS there (if I am ready). edit: well I…
-
Just wondering how other people deal with this
Say on a switch I have two routed interfaces back to the core layer. each of these would have an IP address, so there is no reason (with out ACL's in place) that you could not connect to the switch for managment on these interfaces. I assume most people dont want this and only want one interface on the swich that you can…
-
Passed 642-812
with a 900 this morning. One more CCNP in the world. It took me 5 months in all. I don't have a job so for the last 3 test I was able to study 8hrs/day 5days/week. I think it is time for a vacation. Of the 4 exams the the BCMSN was the hardest because I didn't enjoy it as much. Used lots of labs and CBT Nuggets on all…
-
MPLS Books
-
Boson Exam-Sim
Does anyone have any experience with Boson practice exams? CCNP material in particular. I have Transcender and the questions seem way too easy. I'm taking the exam tomorrow(Monday), I looked into TestOut and they are way too expensive for my taste. TIA PS. Do not suggest any BD, I have no use for that.
-
Redistribution
How can I limit what address i want to redistribute into BGP from ospf through either a prefix list or route map?
-
NAT and VPN
Quick Question. How do I separate the traffic that is NAT'd? I do not want to NAT my VPN traffic, but I do want to NAT the traffic that goes directly to the internet. Thanks
-
BCMSN - what to expect?
Well 2 years ago I was worrying about taking my CCNA and getting my first job and now it is time to start progressing again... I have hammered half of the BCMSN book by reading, understanding and writing notes this bank holiday weekend and am looking at taking the exam in the last week of June. What has been bugging me…
-
Test Commands IOS
I am wondering what the test commands are in IOS. Currently I have found some documentation, but either it is not working properly or we have a switch we need to RMA. It had a Gig Interface that is not working, and we need to test to confirm.
-
Best Recommendation for Online Lab Access
Hello, Could anyone recommend the best place for online lab access? Also, as I am studying for TSHOOT, would anyone be willing to help me out by going into my sessions and break some stuff for me to try and fix? Would love it if Mike could help me out on this one, if he has the time and interest to do so.
-
CCNP Lab- before exam
Hi, Exam day is slowly approching (13th of MAY).Today i setup a lab, and try to configure and test as much SWITCH topics as i can. -Etherchannels (Pagp&Lacp) -VTP modes (server&client) -DTP (dynamic auto, dynamic desirable, hardcoded trunks) -VACL`s -DHCP Snooping -STP -HSRP On my "access" switches (2960) IP source guard,…
-
See username login that doesn NOT exist !?!
Not sure if this is really a CCSP but more along Cisco security... I was asked by a friend to do some work on a router owned by his web hosting company (2 people's company), they don't really have anyone experienced in Cisco stuff. Anyway one thing that caught my eyes was that when I did "show users" I found that it shows…
-
Will Cisco update the track any time soon?
Hello guys, I just finished my 'NP certification (passed ONT 2 hours ago) and now I am moving to the much more interesting for me 'IP. I was just wondering, is there any change for Cisco to decide to update the course soon like they did with CCNP. I know there is nothing officially announced about that, but given the fact…
-
DHCP snooping; No bindings are forming
Just decided to do a DHCP snooping lab and nothing is going as planned. I am using the book and online guide from cisco, but still cannot fathom why it does not work. 3550_24#show ip dhcp snooping bindingMacAddress IpAddress Lease(sec) Type VLAN Interface------------------ --------------- ---------- ------------- ----…
-
Bsci passed!
Passed on second attempt. I dub this exam the widow maker. This key to this exam is that you need to nail the fundamental and have bit of luck on your side; any one who says they pass this one without out it is full of it or cheated. I am not sure what Cisco is trying to prove by giving you less than 1 minute per question…
-
Question on VLANS?
If I were to perform a interface vlan shutdown would this vlan no longer work for the ports I have assigned to it??
-
Equipment Price Points
Hey gents, Let's post some commonly used equipment for CCNP along with their associated price ranges (low to high) and make it a sticky for manageability. It's hard to know if you're getting ripped off or not. If a consolidated thread like this already exists can you please post the link. Cheers, C
-
glbp query
Hi, Just wish to clarify some glbp concepts. Is the glbp weight referring to the bandwidth of the interface or the number of hosts? Cisco doc says that if the capacity of routerA is twice that of routerB then the weight should be assigned 160 and 80 respectively. But how do you know what initial weight value to assign? Can…
-
need IOS for 2511 with TLC?
hey guys I have looked all over and I cannot find the right IOS to work with my limited 2511 access router. I have a current image of c2500-i-l.121-27b.bin but it doesnt have a TLC and I want TLC desperately to run some scripts on my access router to take care of some thing automatically. Do you know of any IOS image I can…
-
End-user port config - Best Practice
Yes I am still alive :P Best Practice often comes down to a matter of opinion, but I was just curious what some of you guys consider 'standard port configs' for end users? Over the years our L2 ports have become a bit of a mess as far as standardization, so I am working on some 'templates' to hand down for cleaning it up.…
-
Failed 642-812
.......
-
Cisco Voucher deals???
Does anyone know of any deals or discounts on single cisco exam test voucher for 642 series? I just check the usually getcertifyforless and itexamvouchers but nothing is on sale. Trying to save a couple of bucks!!!! Any assistance will be greatly appreciated.
-
Bandwidth allocation -QoS queueing
Help me with this please . Looking the configuration bellow.policy-map OUT-NET class A priority percent 40 class B bandwidth remaining percent 70 random-detect dscp-based class C bandwidth remaining percent 30 random-detect dscp-based class class-default fair-queue random-detect dscp-basedHelp me with this please. Looking…
-
Interested in CCNP
Hi guy's I was just wondering how much experience would the typical CCNP student have and how would you guy's recommend before starting Thanks!
-
Labs
Anyone know of any post CCNA (with CCNP in mind) lab manuals? I know about the CCNP lab manuals and the soup to nuts guide, does anyone know any more?
-
Suggestions/Advice pls
hey Yall.. I understand having 2800s for the ccvp lab is preffered. however, as most of us here, i am trying to keep things relatively under budget.. for my previous certs, i have the following equipment to work with.. UC520W 2650xm 881W 3524 inline 2960TT can i get by with adding addtional 2600's with 2mft, nm-2v, dsps…
-
generating failed logins
Hey guys: I'm trying to generate failed logins so I can play with the "login block-for" command. I also have a syslog server setup so I can catch any failed attempts. My config is this: login block-for 40 attempts 3 within 30 For the sake of it, I also put in a "login delay" of 20 seconds" When I do "show login" it seems…
-
Bcmsn
I need to re-certify to keep my current CCNA / CCDA certs and was thinking of taking BCMSN, BSCI and the new troubleshooting exam to obtain the CCNP. Is this a valid certification route and more importantly what relevance will the old curriculum have in todays market? I'm working in a HP house at the moment and haven't…
-
Network Documentation
Hi TE, Is there some sort of de facto standard for docuemntation of your network? I know Visio (or some sort of CAD software) is essential, but what types of things do you draw out? I have a diagram of my WAN connection and internal LAN. But do some of you go as far as to draw out your VLANs between bldgs, or Spanning Tree…
-
CUCM Business Edition
I've tried installing BE 6.x 7.x 8.x on an MCS-7825-I3 (IBM x306, P4 3GHz, 72GB HDD, 2GB RAM) but the option for BE is always unavailable. Have bumped the RAM to 4GB and HDD to 120GB to no avail. Regular CUCM installs ok, have not tried Unity Connection, but no joy with BE. BE installs in VMware ok. Are there any special…
-
Chisco vs Cisco VWICs
soo tempted ! to say the least.. 70 bucks for a vwic 2mft or hundreds for the real deal! is anyone running the fake one ? if so.. is it running in production or in lab.. and how well is it running.. considering this is for my lab and i am trying to save money here.. im really thinking of testing some of these fakers and…
-
Strange static routing issue
I have the following configuration on some stacked (3 of them) Cisco 3750s.ip route 10.179.0.0 255.255.0.0 10.191.255.5ip route 10.179.0.0 255.255.0.0 10.191.255.9 50ip route 10.191.0.0 255.255.0.0 10.191.255.5ip route 10.191.0.0 255.255.0.0 10.191.255.9 50 So here you can see we have multiple static routes to the same…
-
Seed Metrics
Can someone confirm this for me. In redistribution, the seed-metric is carried over to the next hop without adding anything about the link to the next hop. For instance: EIGRP | OSPF | 192.168.1.0AB---10---C RouterB router OSPF 1 redistribute EIGRP 1 subnets metric 20 Router B is performing redistribution into C. The link…
-
Refresh am I right or cracked?
Okay here goes: s = subnet bits h = host bits If ip subnet-zero is enabled (by default = yes) Then subnets = 2 ^s hosts = (2^h)-2 else if ip subnet-zero not enabled Then subnets = (2 ^s) -2 hosts = (2^h)-2 End If Conclusion is subnets are not always -2 but host calc is always minus 2? Is this right? I Know how to calcluate…
-
Option 82
Hi, I configure my (Cisco router) as DHCP server, ok did this DHCP router support option 82 or not, if yes did DHCP router turn on this feature by default or should I configure it by using (option command).
-
BSCI Lab
Guys I am currently setting up my BSCI lab and wanted a few pointers, if possible? I can gather most hardware from my work so if anyone has any suggestions re equipment to add then please throw it out there and I will let you know if its possible to grab it from work! So far I have 1 x 2610 1 x 2611Xm-RPS 1 x 2612 1 x 2620…
-
Management/monitoring of production CUCM
For those of you that manage a production CUCM system, could you describe what you typically do management-wise and monitoring-wise on a daily or weekly or monthly basis? This is something the Cisco Press CCVP material itself doesn't seem to cover very well. Thanks!
-
Does anyone else just wish they'd release TSHOOT results early
LOL. I am just curious to see how I did. The wait has been killing me ever since I took the exam. I doubt I will take a beta again to be honest.
-
Need Advice - Making homemade lab
Well, the time has come around for me to renew (CCNA), but I'd like to do it by focusing on the next level up. I am planning on putting together a smaller home-made lab that would be sufficient for CCNP studying. If at all possible, I'd like to be able to use this equipment for other purposes (CCXP, CCNA cons) for when I'm…