-
serial link speed question
I am studying for the ccent 100-105 and have a question regarding speeds of links. I am confused that it is written in my book that the speed of a serial link is 1544 kbps or 1.544 Mbps. Isn't this too slow, since right now I can speed test my laptop and 3.0 Mpbs download speed. Are serial links something that is not used…
-
Wireless issue on particular access point.
Hi Everyone, I need help in one of the issue. there is issue on going with particular access point. clients are not able to connect to it and connect to other 2 LWAP's that are 6-7 meter away. Even on standing close to that access point, no one is able to connect. After rebooting the access point, client is able to connect…
-
ICND1 in a week, 650 on boson test!!!
Hi guys, I have ICND1 scheduled for the 3rd of may, Ive been through the lammle and odem guides with video training but am not doing too well on the boson tests. I find the questions im not doing well on are questions that come up about OSPF, EIGRP and ect ect whoch buy the way arent even in the ICND1 blueprint. Any…
-
CCNA Official Guide question
I was looking at the official guide to CCNA (the Odom book), and saw two editions. One is just the books for CCENT and CCNA, the other includes simulator software. Obviously the one with software is a lot more expensive. My question is whether anybody here tried the software, and was it helpful?
-
ship antenna
are cisco and cwnp certs valuable towards a job dealing with ship antenna maintenance? in terms of value not fundamentals
-
ICND1 On Monday 5/1
Taking the ICND1 on the first of May. My prep so far has been NetAcademy, IT Pro TV, CBT Nuggets, Transcender practice exams, Boson practice exams, and my work experience. I'm not going to lie, I am very nervous. Right now, I'm watching all the CBT Nugget videos again as a refresher, then the weekend before, I'm going to…
-
Gn3 IOU server connection issue
Good Afternoon, Bascially I have get up using the downloaded 1.5.4 GNS3 and latest version of the Virtual Machine from the GNS3 website. When i start the virtual machine it give me ip 192.168.56.101. I then try and add this as a remote server on GNS3 and its cant contact the server??? I have turned windows firewall off to…
-
Show command for 2960 in Packet Tracer
Currently watching the CBT Nuggets ICND1 videos and working packet tracer however I can't seem to figure out why there is no show command?? Does anyone know how to list the Ethernet interfaces in Packet Tracer? I really don't want to wait to get an actual switch to lab I was hoping Packet Tracer would be enough for now.
-
Best book for Cisco...
Looking for opinions on the best books for Cisco... What I am really looking for is a book that list LAN configuration setups step by step without a bunch of explanations. I am currently watching Packet Tracer videos, have a few bookmarked and I just go step by step through them everyday but I would like to find a book as…
-
Overwhelmed
My CCNA expires in June and I'm feeling a bit overwhelmed with trying to pass the CCNA Security. The main panic comes from not really knowing what's on the exam and what to study. Apparently from what I've read, every resource sucks except the Boson Practice exams. I'm going through them and the questions are just way out…
-
CCNA Security 210-260 Study Book
Hi All, Is the Cisco Offical Cert Guide the best book to read for this exam? Also will I need switches to lab this up or just an ASA? I have access to a Cisco 5510 series. Regards, Bob
-
Subnetting question
What is the first valid host on the subnetwork that the node 172.27.103.132 255.255.255.128 belongs to? plz help me by givin me a simple explanaton for this question... thanku
-
VLAN and subnetting question
Hello everyone, I am studying for the CCENT ICND 100-105 and using the Wendell Odom book. This is my second time going through this material, since I first studied last summer before the test was changed. I am puzzled about something that is in the VLAN chapter (chapter 11). Odom says that "Without VLANs a switch considers…
-
Real world network issue not cisco related though..
I hope the mods don't get upset for me posting this here, I was a frequent poster a few years ago but have gotten away from the cisco world a bit and I have a question that I think someone on here could probably answer. I have an IP security system, q-see brand and I am trying to be able to access my cameras directly (not…
-
Survey For CCNA
Hi Everyone, I am in my final year and final semester in my computer networking program at Fort Hays State University. I have designed a survey as part of my final project if you have your CCNA certification please help me out and take this brief survey I would greatly appreciate it. Thank You!…
-
Home lab with no internet connection
hi guys/gals. . if I buy a lab off ebay... switches / routers and set them up in my room where I do not have a physical ethernet connection to the interent would I still be able to "lab" and practice atleast enough to pass the ccna (without connecting to the www WAN) . . the reason is that the internet comes in through the…
-
CCNA:RS passed!
Hi All, I am happy to say I have finally passed my ICND2 with a score of 825 (811 pass). For those of you that saw my older thread, I passed my ICND1 on Jan 23 and I pretty much started studying right after getting my CCENT. Luckily, I was able to pass the ICND2 on my first attempt, as I failed the ICND1 the first time. I…
-
Passed 210-250 (SECFND)
Figured I'd give this exam a bit of a review since I couldn't find a lot on it. I passed with a score of 951. The exam is pretty straight forward if you have the networking fundamentals and security fundamentals down. If you're doing the scholarship then, depending on your experience, I would suggest making some…
-
HSRP load balancing regarding VLANs.
I know that you have to create Vlans in order for one vlan to use one router and the other vlan to use the other router for load balancing per subnet. My question is why do we have to create VLAN's can't we just create 2 Hsrp groups with 2 different virtual IP addresses and set a virtual IP address on half of the hosts and…
-
certs before cyber ops
Should i go for A+, net+, security+, ccna before I go for cyber ops? I think of studying for my cyber ops. In July, I starting a tech school that I will come out with my a+, nta networking, security +, ccent (school is free and I get paid around 5200 to go to school)
-
interface range not validated - command rejected
Hi I am very new in CCNA study and I am trying to master Cisco IOS cmds. I am using cisco packet tracer. I am trying to up interfaces 2/0 - 2/3 all together but it doesnt work as below - Router#show ip interface brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES unset administratively down…
-
CCDP 300-320 - Advantages of route summarization to a client?
Hi all. I have a doubt, in some tests it says that the answer is B and D, but in others it says that it is B and E, can someone confirm it? A network designer needs to explain the advantages of route summarization to a client. Which two options are advantages that should be included in the explanation? (Choose Two) A.…
-
Home lab question
Just saw some used 2950T switches - 24 port offered for $35 each. They come from a company that resells equipment, ports tested. Does this price sound reasonable?
-
INE's guide to Building Home Labs
A great guide for those looking at the methodology of building a home lab. https://youtu.be/WmZ7Hv9xhiU?list=PL3UpcvaDU_Fm_KgOMRTCbuxKorA4hiCqV
-
Just finished CCENT - CCNA Next
YES. FINALLY. It took me some time to finish this certification, actually. Started studying in September 2016, Stopped in December because of holidays, and Came back studying full throttle back in January. I'm originally from Brazil (The land of the big booty and carnival, where all Americans talk about) and I moved to…
-
Question about Boson Ex-Sim
Hi all, Just started on my CCNA journey and I am thinking about purchasing this to help me prepare for the ICND1 exam and had a few questions. The demo of this product was not able to help me answer these questions. With the exam simulator are you able to target specific chapters as part of the syllabus to test on? I'm…
-
cant ping between SVI's on a Layer 3 switch
Using IOU image i have 4 hosts connected to the l3 switch, 2 in vlan10 and 2 in vlan20. I can ping between all hosts with no issues and the routes are in table etc so all seems correct. What i cant do is ping between SVI's on the switch using extended pings. Also i cant ping the hosts from the switch. Am i being dumb here?…
-
ROMMON iOS image recovery keeps timing out
HI Guys, I tried to upgrade the ios on my router which failed, im now trying to put back the original image but get the following error in ROMMON mode: tftpdnld IP_ADDRESS: 192.168.10.111 IP_SUBNET_MASK: 255.255.255.0 DEFAULT_GATEWAY: 192.168.10.110 TFTP_SERVER: 192.168.10.110 TFTP_FILE:…
-
active timer and standby timer in Hot Standby Router Protocol? Help!!
Can someone please explain to me how these timers work. In the book I am reading it says: Active timer The active timer monitors the state of the active router. The timer resets each time a router in the standby group receives a Hello packet from the active router. This timer expires based on the hold time value that’s set…
-
ASA flash: files..................what to delete???
Hi, ive been kind of a spectator here and this is my first post. Im gonna try to participate from now on. Sorry to start here with a question So I recently bought an ASA 5505 really cheap..... Wanted to wipe out everything from the flash and leave only the essential files. I know I need the IOS and maybe the asdm but not…
-
Can't Ping Outside via Serial Interfaces, works with FastEthernet
Hello, I have the following setup: Router 2SerialRouter 1Internet 10.1.1.2/24 10.1.1.1/24 192.168.1.254/24 192.168.2.1/24 I can ping from Router 2 to 192.168.1.254 with success I can ping from Router 1 to 10.1.1.2 with success I can't ping from Router 2 to 192.168.1.1 via a SERIAL connection between Router 2 and Router 1…
-
Passed 210-260!
Study Materials Cbtnuggets, 31 days before book, Boson Practice tests, many white pages. Length: 3 Months. Attempts: 2 I originally had taken the test 2 months into my studies, at this time I had only reviewed the CBTnuggets videos and the Boson practice test. I took the test while I had a fever and kinda blew through it…
-
Multiple virtual routers on GLBP?
Hey folks. I just want to confirm something regarding the 1024 virtual routers (glbp groups) on each router's physical interface. I know that each virtual default gateway supports up to 4 forwarding routers. The part where I am GETTING CONFUSED at is 1024 on each router's physical interface. Does this mean that 1 router…
-
Can ping from R3 to R1, but not R1 to R3???
R3-ser0/0: 2001:C15C:1234:2222:20D:29FF:FE43:58A0 R2-ser0/1: 2001:C15C:1234:2222:211:BBFF:FE1D:DE00 R2-ser0/0: 2001:DB8:1234:1111:211:BBFF:FE1D:DE00 R1-ser0/0: 2001:DB8:1234:1111:212:DAFF:FEC9:F00 R1-fa0/0: 2001:DB8:1234:0:212:DAFF:FEC9:F01 Hi Guys, Im learning about IPV6 and during my labbing I came across something…
-
CISCO CCENT Vs Boson Practise Exams
Hi guys, Just wanted to get your guys opinion on the boson practise exams vs the ccent exam. Ive been using tbe cisco press book and the lamme guide when studying for the ccent. However when taking the boson tests im finding that questions come up regarding topics which arent even mentioned in the books at the level of…
-
Cisco Asav resources
Hi guys , first and foremost I am not a rookie . I am a long time techexams lurker but now it is my time to greatness.my resolution this year is never procrastinate again. my life has passed and I have done nothing interesting so far. I have a diploma in networking and has been studying for the ccna for the past 5 years…
-
Best resources for CCNA?
I was preparing to pass the exam of Comptia N + but I have seen that in my country (Spain) this certificate does not usually ask for it and that is more recognized the CCNA apart from that according to I understand they have raised a lot the level and that the questions are much more Complex, so few people approve.I am 30…
-
Passed CCNA (ICND2), CCNP/Labbing & beyond
Hey all! I passed my ICND2 It was a fair exam a little harder than I expected and definitely revealed a few holes in my study strategy. Some things I've identified:* More time required reading Cisco documentation * More time required on self-driven study (deeper reading into certain 'describe' topics) * More time getting…
-
Packet Tracer help .cannot ping one router
Hi!.wish I would have found this site sooner!! .Im am having issues trying to ping from PC's to a particular router (Router 1). The set I am using involves 3 routers which are connected. I used eigrp 100 protocol on each router and router 1 is also connected to a switch where it is set up intervlanning for that router. Any…
-
Data Transfer Time Question
Hello everyone, Decided to go get my CCENT cert (100-105) and currently going through the CBT nuggets videos by Jeremy. In the Network Fundamentals: Speed, Data Size and Diagrams video he explains how to calculate your data transfer speed using the file size and connection speed. To assist me in this task I am using a site…
-
INFOSEC Institute CCNA SEC/R&S, CCDA Bootcamp
Anyone done this? Feedback? Thinking of doing this in June.
-
210-250 SECFND | Study Material Recommendations?
My Cisco Certs expire at the end of April and need to pass a CCNA level exam to recertify. I've been pursuing other certs related to Security (CISSP & Sec+ obtained in 2016) so figured the SECFND shouldn't be too hard to pass...but...I'm not finding any study material for this exam, such as Cisco Press, CBT Nuggets,…
-
Vlan active question
i assign a pc in an new vlan(vlan 2).the question is why in #show vlan brief it says tha vlan is active but in #show int vlan 2 says Interface Vlan2 does not exist..when i go to vlan menu (#interface vlan 2 .everything seems ok and status changes even witghout using #shutdown/enable. (Line protocol on Interface Vlan2,…
-
Every day use switch for home lab (IOS LAN Lite?)
Good morning, I have other exams to pass right now but am hoping to start studying for CCNA in a few months. I intend to buy a home lab for this which I understand need not be remotely modern kit, as 10/100 Fast Ethernet devices still use the same functionality that will be tested. But for an everyday use switch I would…
-
CCNA 200-125 Exam
Hi Everyone not much post for this exam so I thought I'd add one for this. Took the exam today passed with 848/1000. passing score for me was 810. Exam was pretty straight forward. Study Material CBT Nuggets - 100-105 200-105, videos were great. Udemy Chris Bryant CCNA - was on sale $10 really good resource to use. GNS3…
-
Passed 200-125!!
I went and took the test on Wednesday night and passed it. Before I started I noticed I had more questions than what the website said would be on the exam, which is weird. But, hey, I passed! Main study methods were: INE CCNA series - work pays for a subscription. Chris Bryant - Udemy. The course is great, and I recommend…
-
Icnd 101-105
The time has come to obtain my CCENT, the certification I set out to obtain when I first joined the forums a little over 3 years ago (I failed the exam by 29 points). Anyways, I'm back for revenge and have a free subscription to Safari Books so I'm looking at these two study materials: CCENT ICND1 Study Guide, 3rd Edition…
-
Subnetting **** Sheet
I've come up with a little '**** sheet' for Subneting that may be of help to others. SUBNET / 25 / 26 / 27 / 28 / 29 / 30 MASK 128 192 224 240 248 252 BLOCK 128 64 32 16 8 4 HOSTS 126 62 30 14 6 2 SUBNETS 2 4 8 16 32 64 BIT VALUE 128 64 32 16 8 4 2 1 As you can see, Blocks = Bit Value and Hosts = Block -2 Starting at 128,…
-
Commands
With Cisco exams should you have every command memorized? Or can you use the question mark?
-
Nexus HSRP Question
I have a query on the above configuration: interface Vlan921 description ABC no shutdown mtu 9216 no ip redirects ip address 10.192.54.5/22 ip address 10.192.54.7/23 secondary ip router ospf 1 area 0.0.0.0 hsrp 123 preempt delay minimum 30 priority 95 timers 1 3 ip 10.192.52.1 hsrp 456 preempt delay minimum 30 priority 115…
-
What is the command line to capture NAT logs for cisco devices?
Question as above.
-
Show Ip EIGRP Topology All-Links not working in ptracer
which lists all routes, even those that are neither successor nor feasible successor routes. I've tried this command on multiple packet tracer configs and it wont show the non feasible successor routes and non successor routes that could be used as a backup after EIGRP DUAL.
-
210-255 SECOPS Exam Review
Just sat and passed this exam this afternoon. Wow, what a weird exam. If you're doing the scholarship program then I will warn you - you will need additional materials. Cisco did an odd one with the course for the second half of the qualification. Roughly 50% of the course isn't even mentioned in the exam outline and a…
-
Starting a Cisco Home Lab: Hardware and GNS3?
Good Morning Everyone. I've got a couple of questions for the forum about starting a Cisco Home Lab. 1. If the goal is to be certified across the full stack of Cisco certs at the Associate level, is GNS3 a requirement? Or will a hardware lab suffice? 2. Any recommendations for good laptops to run GNS3 labs on? Thanks!
-
IP subnetting!
Dear all, I have just started the CCENT study guide, and currently going over practice questions at the end of each topic, I do realize that there are number of ways of solving Subnetting problems and I and gradually understanding the concepts. I have come across a practice question, and I understand the process, but I do…
-
Boson Practice Exams
So I've been studying CCNA Sec for a couple of months and thought I wasn't too far off being ready for the exam so decided to get the Boson practice exams boy was I in for a shock! Is it just me or is the Boson questions really hard? I feel I am missing large gaps in my understanding of different areas for the exam. But…
-
Do lab kits come with the IOS?
Hello, I'm wondering if i buy a lab from certificationkits will they also come with the IOS or will I have to purchase that separately? If so how much does the license normally cost? Thanks
-
__________________
__________________
-
Correction CCNA Security 2.0 Practice final exam
Please, I need the answers from the final practical exam of CCNA security v2.0
-
Should I pass N+ and go for CCNA?
Is the N+ needed? I passed my A+ and I'm certified but I failed my N+. My goal is to get my CCNA/P and be a network administrator. I know with A+ I'll get an entry level desktop support job paying anywhere from $35-45k here in New York. I also know I have to work my way up. My question is should I try the N+ again or just…
-
Removed.
Post removed.
-
Issues that you deal with as a NOC employee.
Can you list the issues or tickets without going into any detail about the network of violating your company's policy. Thanks!
-
Keepalives packet are they only for routers
I been doing some searching for keepalive for cisco devices and found it mostly for routers. I thought that if a switch had a keepalive it would not need broadcast to find client on the different ports.
-
nonegotiate
Is there a way to get Negotiation of Trunking back on without resorting to the '#default interface' command?
-
PT activity stuck at 74%
this is a pka file: https://drive.google.com/file/d/0B1J_bf9W3MGPRHFOSTVMbDN5YWs/view?usp=sharing i configurated everything including no.2. just scroll down until the end. no. 3 asks to add routes so there is connectivity between the school computers (no default routes). doesn't the router do this without the static…
-
What is the equivalent command for show authentication session for nexus switches?
Question as stated in title. This is my software details: Cisco Internetwork Operating System Software IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(1 SXF11, RELEASE SOFTWARE (fc1) Technical Support: Support and Documentation - Cisco Systems Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Fri…
-
CCENT/CCNA Course Notes
Hello, I've spent the last 9 months taking/passing CompTIA A+, Network+, and Security+ exams. I'm now preparing material together to study for the CCENT/CCNA exams and wondering if anyone knows of a website with good course notes that compares to Professor Messer's course notes? I found that using Professors Messer's…
-
Help with RIP routing
I am trying to allow each "segment" of my network connect with each other via RIP routing, i'm not entirely sure what i'm doing wrong. I have tried RIP routing each router already and found myself at a dead end. I'm new to packet tracer and would appreciate some guidance. https://ibin.co/3FY263QfpGQR.png
-
Plan of attack for making use of a really big physical lab
So I've got limited access to a fairly large physical lab 20 switches/20 routers/30 computers all patched into a rack. I want to make the most of it without getting overwhelmed by the mass of equipment. Does anyone have advice on how they would attack such a large lab and make the most use of it? My thoughts so far:* Don't…
-
What's the difference between line console 0 and line vty 0 5?
Both can get you router(config-line)# so what differs? :
-
Would you suggest Todd Lammle or Wendell Odom for a CCNA book?
As title says! Which would you recommend? Thanks
-
Hello
Hello forum, New member. Studying for CCNA R&S along with an AS in Network Infrastructure. I found a passion in Cisco systems and networking in general. I figured I would join the forum to gain some helpful information and knowledge. I have a small home lab I practice on. 3x-2610XM, 2x-2960, and just added 2x3560 to…
-
Best Practice
When I configure Networks for my studies, I always assign Router Interfaces with the 1st Host Address of any given IP Network. Eg: For Network 192.168.55.16 /28, the Router Interface would be assigned 192.168.55.17 /28 as opposed to say, 192.168.55.27 /28 Is there any 'Best Practice' for this? Is there a valid reason that…
-
Subnet Question related to Class B Network
[COLOR=rgba(0, 0, 0, 0.87058 ][FONT="]Question: What valid host range is the IP address 172.26.220.95 255.255.255.128 a part of? The answer it show's as "[/FONT][/COLOR][COLOR=rgba(0, 0, 0, 0.87058][FONT="]172.26.220.1 through to 172.26.220.126". Where as my calculation is getting different address as 172.26.220.0…
-
Sybex and Cisco Press editions
Well I'm finally getting ready to sit for the CCNA after two some years of waiting. When I first start this trek I picked up Todd Lammle's 4th edition and the Cisco Press books. Now I see that Todd has a 5th edition out.....and my question is will the 4th edition and Cisco Press books be enough? Has enough info been added…
-
CCNA Sec Cert Guides: 640-554 vs 210-260
How different is the new exam vs. the old? I ask because Keith Barker's 640-554 official cert guide has much better reviews than the new cert guide has. So if the exams aren't all that different, I think I'll buy the old guide.
-
CCNA V3 Workbook
Hello all, I'm looking for the INE CCNA R&S 200-125 V3 Workbook. Does anyone have it? if so, please share with me.
-
Question on setting up live CCNA home lab
Hi all. I'm currently studying for the CCNA and I have a question. When configuring devices how do I set up the lab so instead of having to disconnect and reconnect the console cable I can use some kind of software to just click the router/switch and do it that way? Im currently watching Chris Bryants videos and his lab is…
-
CCNA Data Center Job Outlook?
I've read a few times that CCNA Data Center is quickly gaining traction to be one of the most looked for CCNA's. Primarily because a lot of places are migrating to data center technologies. What do you think? Should it be a goal for next year, or wait another year or two?
-
Need Help
I have passed my CCNA Security exam but I am shocked to know that I am unable to considered as CCNA Security Certified. My CCNA Routing and Switching Certification Expired on 27 February 2017. Is there any way to get CCNA Security Certificate and please let me know if I attempt ICND 1 exam will it renew my CCNA routing and…
-
Configure 2 ASA's over a WAN link
Hello all, So I just got this job a couple of weeks ago and they have dinosaur age Cisco equipment they want me to work with right now before I let them know of my recommendations for upgrading. We have a microwave WAN link from Cox in San Diego, CA. that provides the internet for our remote building across the border into…
-
problem with EIGRP configuration
Hi, This is my the very first post in here. I am a newbie to CCNA I have started learning like 3 months ago... so the question may be funny or at least elementary. Could anyone tell me what's wrong with the configuration of S0/0/0 R1 and S0/0/0 R2 ? Those 2 interfaces form adjacency and they lose the adjacency after few…
-
Ethernet Troubleshooting Labs
Hi Guys, If anyone could upload some packet tracer labs for the following troubleshooting topics it would be greatly appreciated. Troubleshooting: Vlans Trunks Port Security Interfaces Thanks, Pujan
-
Got all my study materials and no excuses!
Hey guys, I am so glad I found this form that has so many helpful and supportive members! I have read through a lot of threads and you guys rock at encouraging people to keep at it and get certified. I tried a couple years ago to study for the ccent/ccna, but didnt take it seriously and ended up with some wasted time and…
-
Exam topics: Firepower Management Center
Is there much on the exam related to Firepower Management Center, Sourcefire 3D, setting up and configuring ASA's, 3D sensors, etc?
-
Failed ICND1 lol
My test was scheduled for 3/15/2017 at 12:00pm. I was stuck in a meeting all morning the day before and intended on pushing it off the following week because I felt I was only 50% ready (I slacked this past weekend and didn't do one single practice lab). 12:04pm, I went to reschedule and realized I couldn't (24 hours ). So…
-
CCNA Cyber Ops
Hello! I have been admitted to the CCNA Cyber Ops class starting in a few months. I want to make sure I am prepared for it though. Could I get any advice for that? Anyone know anyone that is taking the current class?
-
Kevin Wallace's Dijkstra Calculations confusion
Just watchin some of Kevin Wallace's videos on OSPF and SPF (Dijkstra) calculations. I'm really confused with some of the numbers he's getting. For instance from node: R1->10.3.3.0 from the perspective of 10.1.1.0 he gets 3? I would've thought this would be 2. I'm not sure but it seems he's adding both outgoing and…
-
Can you be able to ping the management IP of a Vlan that is set as native vlan????
Hi Guys, Playing around packet tracer building labs I have noticed that when I create a management IP address for a native VLAN, I cant ping it from a directly connected host (even though the host is connected to to a port assigned to the native vlan). Is there a reason this isnt able to happen or have I made a mistake…
-
Re certify CCNA
What is the easiest way to re certify your CCNA? I have about a month and a half until my current CCNA expires. I was going to just let it expire, but I decided against that. I was thinking CCNA-Security or Wireless. Any thoughts? Thanks
-
Anyone else currently studying for CCDA?
I've watched the CBT Nuggets as an overview and am about 400 pages deep into the OCG. I'm planing on being selective of the chapters to read in the FLG before scheduling an exam. Not super stoked about this exam, but I have a surplus of time at work, and it's a pre-req for CCDP. Initial thoughts: I find it absurd that a…
-
How to emulate Troubleshooting Labs for CCENT
Hi Guys, Was just wondering if anyone could give me tips on how to develop troubleshooting skills. Obviously I can make a lab like I have been doing for my configurations but as I know what the faults I have made, it makes me feel like its not a real world scenario and I worry if Im even troubleshooting correctly to begin…
-
Home Lab
I've just started studying the CCNA and i'm looking at setting up a home lab. The room in which the lab will be in is in a different room to where my cable modem/router is in. What will be the best way to setup this lab? Cheers.
-
cisco 4500 output drops
Hi, I have a access switch with a 10gb upstream interface and a 1gb downstream interface, i can see from the show interfaces [int] that traffic is being dropped on the upstream downstream direction. TenGigabitEthernet1/1 is up, line protocol is up (connected) Hardware is Ten Gigabit Ethernet Port, address is f4cf.e213.7e30…
-
Can someone please help me in understanding this?
I'm currently studying for my CCNA certification and am trying to figure out IPV6 The textbook i'm using has a lab for the manual and stateful autoconfiguration and has a diagram where there are 5 routers (a to e). Routers A and B are connected to one interface Fa0/0 on router C and routers D and E are connected to another…
-
OSPF Cost Calcuation Packet Tracer Gig Link
Hi I have a 1Gigabit interface with the current bandwidth set to 1,000,000kbps. I do a show gig0/1 and I see the current bandwidth has been correctly specified. I go into OSPF Configuration in the router and type in auto-cost reference-bandwidth 1,000mbps to get the cost value of 1. instead of 10 for a FA interface. I do a…
-
Passed ICND2
With a score of 883. Been following this forum. Thanks guys.
-
Home Lab Firewall
Should I get a Firewall for my home LAB? If so, which one? I've seen a few different ones for sale, but I don't know a thing about them. The ones I've seen... PIX 501 PIX 515 ASA 5505 ASA 5506 ASA 5510 ASA 5512 ASA 5520 ASA SSM-10 Any advice is much appreciated . Thanks.
-
CCNA Security Exam 210-260 March 11th 2017
- Back in the forum after ages .. feels good - Have read the 210-260 official cert guide, though not in its entirety - Have worked with ASA 5510 and 5512-x in an HA environment for a few years - Will be attempting the exam today at 10 am (its 12:45 am as we speak) - USD 300$ charged to my Credit Card already ... ... well…
-
Passing Score in CCNA security
Hello Does someone know about the minimum passing score in CCNA security Exam 210-260 ? Thanks by advance.