-
I have joined the CCNP club!
Hi everyone I passed my TSHOOT exam with a score of 1000 and am now a CCNP!:) after one year of hard study I am so happy to pass this and be able to finally rest knowing that it has paid off and it has really been worth it despite my intial concerns over not having my own equipment.I found there were other excellent…
-
DHCP excluded addresses
When a device is configured as a DHCP server does it automatically exclude assigning clients with the IP address configured as the gateway? I'm guessing it does, but want to be sure. Thanks.
-
mix copper- and optical-ports in port-channel on Cisco 3750 series
While I know that under Cisco 6000/6500 series Ethernet interfaces that participate in a port-channel can include both the copper and fiber-optic ports, then is this allowed on Cisco 3750 platform as well?
-
cucm/cups/cuc What spec PC ?
Hello, I am wanting to buy a PC for home lab use. I want to run CUCM, CUPS and CUC on the same machine using Esxi. Are any of you guys running the three on a single PC ? If so, can you please recommend RAM, processor etc specs that will enable me to run these 3 apps on the same machine ? So far, I have been told I need to…
-
Passed SWITCH
I passed the SWITCH exam on 2/8, had to take it twice after failing two weeks ago by less than 1%. I'm 2/3 of the CCNP now. Already have a GK training scheduled for MAY to get some troubleshooting classroom training. BOO-YAH
-
GNS3 Newbie, Pls Help...
hi guys, should i post here or in the virtualization section ? whatever, i think there are more ppl who use gns3 in CCNP section, so i post here... if wrong section, pls redirect this thread... thx i just installed GNS3 & don't know what are the initial configurations are? i got some error about dyanamips when i try to add…
-
Advice on when to get it
Ive been studying for my CCENT i'm pretty ready just trying to get the money to be able to take, and later on i will go for part 2 during like the summer. So if i get my CCNA this summer should i move directly to CCNP during the fall. I go to school, and they offer advanced routing and switching classes for CCNP. Should i…
-
CCNP Switch Lab Manual - Everything Topology
I was prepping to run through the CCNP Switch Lab Manual, and I realized that I didn't have a good idea about a single topology I could run, that would account for all the labs. (Really, all that is needed is the 4 switches in the middle if you don't want to test any traffic.) I decided that I wanted to plan out how I…
-
Passed SWITCH today - study materials used
Passed SWITCH today! First try on SWITCH, and wow, that test was not easy. I thought it was harder than ROUTE. I really thought I had failed it by the time I got to the last question, but I am really happy to pass because I am burned out on the topics and can't wait to get into TSHOOT. To help some others, the study…
-
CCNP SWITCH study materials
Hey guys I am going to start my ROUTE next week and already have the FLG book ebook and Routing TCP/IP Vol. 1 2nd Edition. I am making this thread for my Switch. I will be buying books while I still have an extra money and while Cisco still have some discounts on their books/ebooks. What I have now are the FLG and OCG…
-
IPv6 Redistribution - missing something
Need some help here, I cannot see what I am missing, I am working through the example on Route FLG p800, four routers, R1 running RIP, R4 running OSPF, R2 and R3 redistributing between RIP and OSPF. Routing tables look fine but I cannot ping the loopback on R1 from R4. All routers can ping their directly connected routers…
-
OSPF LSA's
I'm not so sure I fully understand LSA's. I've read the sections in the OCG a couple of times now, and it still seems to hurt my head. Does anybody know any good links / resources that put the LSA's in simpletons terms?
-
Help With Challenge Lab OSPF
I am using the CCNP route lab manual and am attempting the challenge lab. It seems I have everything configured correctly. I am in the final step of the lab. It does not tell you how to do anything just what to do: 1. Configure the interfaces in the diagram with the IP addresses shown. 2. Configure the bandwidth to reflect…
-
Ciscopress Deal of the Week UCCE
Cisco Unified Contact Center Enterprise for $9.99 $9.99 eBook Deal of the Week | Cisco Press Might be worth grabbing for future studies
-
Recertification for CCNA & CCNA Security?
Am I reading this correctly... "Pass any current 642-XXX Professional-level exam" So if I pass say 642-618 (FIREWALL), this will renew/recertify my CCNA -AND- CCNA Security?
-
CME on a 2821... license?
Hey Voice-techies. I snagged a good-lookin 2821 ISR that's collecting dust... up'd it to 15.1(2)T1, and did the base config to get interfaces, ntp, dhcp, etc, all good to go. Then I checked the license status... nothing but ios-ips-update. Ugh. For CVOICE studies, what's the easiest way to get CME up and running? Does…
-
CCNP Switch Network Planning Questions
I'm looking at the Cisco Exam Topics for the CCNP Switch and it mentions things like, Determine network resources needed for implementing a Security solution, create implementation plans and create a verification plan. Does anyone know what these mean? It sounds like they want you to create documents describing your plans…
-
RSTP+ question
Hey guys, on our switches at work 4 of them at a branch site, they are using pvst, but if there is spanning-tree portfast configured on each access port on the switches, I dont see why I need to bump up spanning-tree mode to rapid-pvst? do you?
-
Losing it all? (knowledge)
I got my CCNP last year and finished it in September/November. Since then, I haven't really used it too much in my current job. It's been great to be able to have a big picture for troubleshooting but I'm not "the one" who gets to configure the routers/switches on the network (I'm mainly firewalls and security). I was…
-
CCNP Voice certified: Passed TVOICE (5/5 exams!)
Materials Used to Study: Cisco Press Quick Reference INE vid #130 All KWallace TVOICE vids (paid version) Most difficult of the exams in terms of questions. Lots of exhibits, configs, trace files etc. KWallace videos and QR were pretty good resources. The INE video was basically read from a power point and included very…
-
Planning on replacing residential router with 2691
Hey, guys. This might not be in the right section, so if it's not please move it. :) I was trying to get some assistance from an irc community I'm part of, but I'll just put the logs here. codey: I have an issue: my netgear residential router has no opensource firmware available for it and no settings for just making it a…
-
Certification Question
deleted.
-
Setting a/s port as dce on 2522 ... Stupid question ?????
Dear Ones good day , this is my first post in this lovely forums , very happy to be here. Am (ex BT and AT&T) , N+ and CCENT certified , giving my CCNA in 2 weeks , going well but ....... have a lab 1x 3550 48 smi (coming today) 3x 2950 24 1x 2522 1x 1760 1x 2610xm 1x 2611xm working out a frame relay setup , all fine…
-
Reroute traffic from one network to another
Hello , I have set up this configuration on my router and thanks to you it worked just as I wanted. Please I need to configure a second router, attached is a rough netowrk diagram of what i want with a red highliter indicating the flow of traffic. what I want is such that the second router will be at a site in a second…
-
Uh-Oh, dodgy ebay purchases!
Hi, I think I may have just been burned by an ebay purchase. I bought a 3548 catalyst switch from ebay...it powers up but I can't get in the console port. I've tried all the baud rates I can think of. I've tried holding the mode button down, but I'm not quite sure when to let it go - anyway, that just seems to make it get…
-
CUCM 8.6 Lab H.323 and SIP requirements
Hi folks, I'm new to the Callmanager world and have CUCM 8.6 setup in my lab. I have several Cisco 3905 SIP phones registered with the callmanager and would like to perform some experiments with H.323. I've downloaded SJPHONE H.323 client but can't seem to get it completely working. My setup includes the callmanager, 2…
-
CCNP Lab
Hey guys, I am looking to get started on my quest for my CCNP. Only problem is i'm not exactly sure what i'll need lab wise to do it... I'm planning on splurging on a lab and need some advice. Please lemme know what you think of these choices and which is better. Option 1: Complete CCNP Cisco Certified Network Professional…
-
autosecure enabled how to update IOS?
OMG i cannot find it on google but how do yu update an IOS with auto secure enabled? Big difference; how do i update the ios on the above autosecure config i cannot find crap on google..
-
Virtual Vs Real
I recently purchased a 3550 for the Switch exam as GNS3 is missing too many features for the switch exam but I've actually found it a little harder to study for the Switch material since using the real gear. Has anyone else has this problem? I find that when I'm using GNS3 I can get about quite easily and things seem a…
-
Why use PAgP or LACP
Proprierty PAgP or industry Standard LACP. Why would you want to use any of these Etherchannel negotiation protocols when setting unconditional Etherchannel (Port-channel 1 mode on) will unconditionally etherchannel the links. Any thoughts or suggestions or am I getting the wrong end of the stick here? Thanks
-
What is the story with MGCP?
Right here goes my rant...I seem to be encountering a lot of trouble with MGCP, in particular getting a PRI line to register as an endpoint in the CM. Of the last three site installs I have done, I have had a hair-pulling experience each time. My problem seems to always be the same, I cannot get the PRI endpoint to remain…
-
CCNP after two and a half years!
Guys, I passed my Tshoot today and as a result became a CCNP. I'll now be moving on to CCNA VOICE. Voice is where my heart is. I do asterisk installation for small businesses, so I'd like to pursue voice up to CCIE. The advice is to start from CCNA voice, which I'm going to do. I'll book it for a two months time and start…
-
Unity 8.0 MWI issues
We just cut over to Unity and CUCM8.x and we are having widespread issues with the MWI lights not syncing or even voice mail being delayed in some cases. I think it may have something to do with the port group configurations but i have been unable to find an ideal configuration or best practice from Cisco. Does anyone have…
-
642-627 - IPS Exam Experience
To give you a little background, I earned my CCNP in February of 2010 which was shortly before the transition that Cisco made into the specialized CCNP designations. Of the 4 CCNP exams that were required at the time, I enjoyed ISCW the most. I was disappointed to learn, upon investigating various options to re-certify,…
-
Back to back T1/E1 configuration
I need help getting back to back T1/E1 working please. I have been trying to create a simple lab where 2 CME routers can dial between the phone each one has registered. These phones can call each other over a frame-relay link so I'm sure my problems are related to dial peer config or controller configs. Here is my basic…
-
When to implement a three-tiered design
How big would a network need to be in order to justify having a three-tiered design? How do you work out when you need to start implementing switch blocks? Is it invalid to have a 48 port collapsed core switch connected to 48 access layer switches each with 48 hosts? (that's 2304 hosts). If each access layer switch has its…
-
OSPF Router-ID
Dumb question time. I have 5 routers. Under Router OSPF config mode, I type "router-id x.x.x.x". On 4 of the routers this is accepted. On one of them it isn't. The router that it isn't accepted on is a 2503 running an old IOS - 11.3(6). Is it not accepting the command because the old software doesn't take it, or is it…
-
Load Balancing/Sharing Between Multiple ISPs
What is the best way of implementing load balancing/sharing between multiple ISPs? Is load balancing even possible? I imagine you can configure static routes to load balance traffic, but then what about the differences in speed between ISPs? If it is possible it sounds kind of complicated. Per packet load balancing over…
-
Private VLANs
Hi all, A guy from work has given me a number of tasks to do using private VLANs. We got 9 routers and created a topology. 1 switch and 9 routers (acting as hosts). He used the network 157.125.28.0 /24 and VLAN 10. There will be: 2 hosts in community #1 2 hosts in community #2 2 hosts isolated 1 router as the promiscuous…
-
Cisco Network Academy?
I'm on a posting frenzy today. :) I was checking out Cisco Networking Academy online today and I noticed the community college across the street from my house is offering CCNP courses that are part of the official Cisco Networking Academy. I'm interested in going since a boot camp for the CCNP usually costs upwards of…
-
Passed FIREWALL v2.0
Yet another FIREWALL pass post, just passed with an 872, I'm happy with that! I used the OCG, and I've used a lot of VODs (got caught in the middle of exam change) from various vendors, I have to say, the new cbt nuggets VODs were definitely the best. Also I used only gns3 exclusively for labs...even though I bought 2 asa…
-
Expanding my lab - switches?
Hey, Although I'm studying for ROUTE at the moment, and have enough kit to get by, I'm looking at buying a couple of switches for when I come to do SWITCH. My current lab is: 2950 switch (24 port) 2 x 1700 series routers 2501 router 2503 router 2620XM router (2 x WIC 1-T's and a NM-4A/S) I managed to rescue a full size 19…
-
Thoughts on Cisco security tracks
So i'm flirting with the idea of doing CCNA+NP Security before I start down the lonely CCIE road. Mainly because I'm doing a ton of ASA work now and don't have much background in it other than very plain configs. The blueprint looks promising to become well versed in the ASA and IOS security. I'm really looking at this as…
-
CCNP home lab: equipment needed
Hello, I'm planning to start my CCNP journey with CCNP ROUTE. Anyway, I would like to have an home lab that could help me going through also with the topics for SWITCH and TSHOOT, that will come back later. What do you think of this? 1x 2620XM Router 48F/128D with SDM, Call Manager Express, Frame Relay 4-Serial Ports, 1 FE…
-
V.35 frames?
According to Wikipedia: Are RS-232C, RS-449 and V.35 communication protocols besides being physical connector standards?
-
DHCP Snooping
Will DHCP Snooping work on a switch configured as the DHCP server, that is directly connected to DHCP client workstations, and is used as a gateway? I guess DHCP Snooping is enabled on the VLAN, and the trusted interface will be the SVI... but isn't that going to be a problem as the trusted interface IS the SVI?
-
Passed CAPPS (4/5)
Materials used to study: Cisco Press CAPPS Quick Reference some INE vids (115-129) All KWallace CAPPS vids (paid version) Home Lab Work Experience did help (1yr exp with CUE) Also, reviewed the exam topics one by one, often looking for more detailed explanations of each on Cisco's SRND and other papers I scored high on…
-
OSPF DR/BDR Election
Just to clarify what I think I understand... The DR is elected by the highest priority code, and BDR is elected by the second highest. In the event of a tie, the highest Router ID wins. If the priority code is set to 0, then the router won't take part in the election. All this is a little bit irrelevant though as it's not…
-
3750X 1GB ports not coming up
Hi, I have hardcoded 1GB ports on 3750X to 1000 and full duplex for all servers connected. THe ports are not coming up with this speed and duplex settings. If I configure them to 100, I am able to see the port is up. Whereas if i connect the same servers to 2950 switches, i can see the ports working fine with 1000 speed…
-
I'm having issues w/Boson Netsim and Stub
So does the Boson Netsim allow the configuration of stub routers? How did you get it to work? I can get the router to take the stub commands but it doesn't act like a stub router, i.e, new stub router is still receiving query and sending replies to and from non-stub routers vice versa. Also eigrp distribution-list doesnt'…
-
Nat on a Stick
I have set up my router R1 with Nat and ZBF for remote users to access it. Please I need to configure a second router. what I want is such that the second router will be at a site in a second location such that remote users will come through an Ip provided through ISP to the router and from that router they will be…
-
Server load balancing
I started a similar thread to this in the past but don't think I explained myself as well as I could have, which caused some confusion. I have a server connected to two layer 3 switches via two 4 gigabit EtherChannels (thats a 4 gigabit EtherChannel per switch). I want to send 50% of traffic down one EtherChannel link to…
-
EIGRP Stub Routing
I've read over stub routing in the OCG the other day, but didn't really get my head around it. I was going to ask, but I don't like asking silly questions, so I googled. If anyone finds it useful, I found a post on the internet which helped me to understand it: EIGRP Stub Routing – Astorino Networks It doesn't really say…
-
Can't Access My website hosted on my internal webserver behind a Cisco Router
Hello, I have a website hosted on my .52 webserver, port 80 and 53 have been opened. I can access the website from the internet by using its public IP address but not its name (www.aaa.com). Below is my configuration I have broken down my configuration into three phases 1) NAT for two ISP's : one Primary and one for…
-
GNS3 ASA > IPsec VPN> GNS3 Cloud > Live Gear: Is this possible?
I'm new to using ASA inside GNS3. Is it possible to establish a IPsec VPN through the GNS3 cloud interface to live gear, to another physical ASA? Thanks.
-
2620XM Router Throughput
I have a question, not really exam related, but all in the name of learning! I'm playing with my home lab and I've set up a network as in the picture: http://s7.postimage.org/kauvdad17/home_network.png I've got my host connected into a 24 port switch - the left 8 ports are in VLAN 100 (hosts), the right 8 in VLAN 200…
-
how long would it take....
Hi guys, appreciate this is quite close to a 'how long is a piece of string question' but i'm after very broad scopes....so... i'm planning to do the CCNP security....if i had 5-6 hours everyday for a month how much would be a realistic amount to achieve in terms of the 4 exams? focusing solely on studying. I've worked…
-
Study material for beating ROUTE information into my head
I have watched the CBT videos, read the OCG and worked through the lab manual once. I plan to go through the lab manual again and work on some more labs from various sites online. I'm looking for a study guide that beats the little, hard to remember without looking it up, things into my head. I find myself drawing a blank…
-
EIGRP Metrics
Hi, I'm having a little trouble getting my head around the K values, in particular K5, and would be grateful if anyone could help clear it up. From my understanding a K value determines how much effect a particular value has on a part of the metric calculation.* K1 effects the weight of Bandwidth - which is manually…
-
GNS3 c2600 issues
I'm trying to virtualize myself some routers and switches, and am encountering an issue, and am not sure where to begin. The 2600 seems to work properly at first, then it decides to spit out a bunch of stuff. 00:00:47 UTC Fri Mar 1 2002: Unexpected exception to CPUvector 700, PC = 0x802D07E8, LR = 0x802D0738-Traceback=…
-
Firewall exam musings
Well I've just started on the Firewall Cisco Press guide in earnest, and have come across the first error - The ASA 5550 - the fixed SSM card is apparently Bus 0 and the 4 ports that are normally on the 5510/20/40 are Bus 1? No. :)
-
Can Access Webserver from Internet through Cisco router
Everything works fine internally, but I have a website on the 10.0.0.52 server with the external IP of 216.140.140.4. When I tried to access It from the internet It doesn't work. Please does anyone have any ideas on what might be the issue here? Though If I use the IP 216.140.140.4 i can access the website, even though I…
-
Connected ipv6 network not showing in routing tabe
I'm having connectivity problems on an ipv6 p2p frame relay network. In the foundation learning network, p800 or 801, there is a network diagram of four routers that I am trying to set up. However when setting up a router I am creating mulitple p2p interfaces interface Loopback1 no ip address ipv6 address…
-
a couple of lab setup questions
I mostly studied for my CCNA using PacketTracer and have limited hardware experience. Passed it my second try but several months have passed and I've forgot some things. Im setting up my CCNP lab and feeling less than good about my lack of hardware experience. So far I have 2621XM, a 2620XM, and a 2811 routers. All of…
-
Need some advice
I am setting up my training expectations for next year and I am stuck. I have already committed myself to going through the CCDA/CCDP but my biggest question comes after I have completed those. On the one hand, I have always wanted to complete my CCIE R&S. The other option is start going through the Datacenter…
-
642-813 Switch Passed!
:) Hi all, I'm happy to say I passed my Switch exam this morning and am now looking forward to the last exam in the series, TSHOOT which I hope to do within the next couple of months. Switch was a tough exam and the sims seemed quite involved but managed to do it although I am very relieved this one is done now as was…
-
How to Ping without using Static,Default or Dynamic Routing.
I want to Ping R2 from R1's Loopback. ex:- ping 10.0.0.2 source 20.0.0.1 But i don't want to use Static Routes,Default Routing & Dynamic Routing. Is it even Possible? What i Have tried is this:- I made an access-list and a route map on R1.In Route-Map i matched my accesss-list and set my traffic to moove via serial 1/0 i…
-
6500 VSS VSL link
hi very quick question, can you run VSS between two 6500's with out using an ether-channel? Just using a single 10Gig link? I know the suggestion is to use two 10gig links, however due to timing issues the 10GIG cards will not be here for a while, so I was wondering if it is possible to run with a single link that I can up…
-
EIGRP Query Domain or Flooding Domain.
Here R1 & R4 are in Same Eigrp asn that is 100. (R1 & R6 ) + (R1 & R5 ) are also in same EIGRP asn that is 100. now interface connecting R1 & R2 are in EIGRP asn 200. Note:- There is no redistribution in R1 between EIGRP 100 & EIGRP 200. Suppose R4's interface goes down. Now R1 will send Query messages to its neighbor R6 &…
-
Ips
I installed Zone Based Firewall, and want to install IPS on my cisco 2911 router. I have installed IPS using CCP before but my issue is does the IPS come preconfigured with some default settings: or is that that I must tweak it to my setting?
-
Study Material Freely Available on the Net?
As I grow into my job I am starting to find more ways of being more efficient and spending less time of things I have spent much more time on in the past. The end result is more downtime Yes I know I probably should be seeking for other things to do that result in busy work but there is only so much that can be done on…
-
How to Monitor my Network
I have configured my cisco 2911 router for a zone based firewall, Initially there was a proprietary firewall in the routers place and when some one tried some ambiguous activity we got warning alerts through emails indicating what and who tried to compromise the network and what action was taken(ie attackers ip was…
-
Recursive look-ups in iBGP
Thinking of doing the CCNP Route or CCNA SP next, so started doing a bit of research on topics and reading up a bit. Took a major interest in BGP so ive been doing a bit of reading on that, then i came to recursive look-ups! OMG!!!! What is going on? can someone please explain to me how this is done, where ever i read it…
-
Route is done!!
Well my fellow TE members I can finally post a pass on the 640-902 (Route)!!! I got a 895. I have been studying on and off since the summer and it feels great to have it under my belt. As for study materials I used Chris Bryant, IPexpert, and the FLG.
-
Gigabit to the Desktop
I'm guessing it's a good idea to run gigabit to the desktop if you are doing a design from scratch; but is it a good idea to actually enable gigabit on the switch ports connecting to those desktops? My concern is that if you have 48 workstations running gigabit connected to a single switch couldn't that potentially cause a…
-
CCNP or Bachelors in IT
Hello guys, I thought to bounce thoughts off similar minds. Being that one has an Associates degree + CCNA with a lot of help desk and desktop type experience, is it better to finish college with a Bachelors degree in IT or go forward the cert route by obtaining a CCNP? Still at the beginning stages of trying to sort this…
-
C4500x & evn
We will be rolling out 4 4500X in our network as an aggregation (distribution) segment. We will connect Layer2 switches for access, use 4500X as Layer3 and configure multiple VRF's for traffic separation. We will use VSS on 4500X although this is new feature. Also L3 MEC is missing but we can live without it for now. We…
-
Advertised Distance(AD) vs Feasible Distance(FD)
Hello Mates, confused with the difference between AD and FD the new BSCI book gives a some what confusing definition that sounds the same for both. It says AD is the cost between the next hop router and the destination. And FD is the sum. Then that would mean to me they're both the same thing. I'm confused. Please someone…
-
switch lab suggestions 3550 EMI - SMI ...
Hello, today i have started to study for Switch exam.Also I am about to build/ renew my lab. Currently i have 2 x 2950-24 switches. How many switches do i need more ? which layer 3 switch is your recommendation ? will 3550 series be enough ? there are more than 1 version of 3550, and which one is your recommendation ? I am…
-
Please help me...Calculating metrics for FD across default Serial interfaces
Default values are in effect: Bandwidth is 1544 between the two ends Delay is default at 20000 no other metrics are in effect: Show ip eigrp topo from router 1: P 192.168.2.32/28, 1 successors, FD is 2169856 via connected, Serial0/0 What I don't understand is how they get that FD metric over a default serial link. Here are…
-
the difference between load balancing and load sharing on Cisco Switches?
Regarding advanced Spanning-Tree modes like PVRST+ , i need to learn the difference between these two. It'd be better if you show me via example. Thanks in advance
-
need help in setting up a new network.
hello all need your help in setting up a new network, internal lan users need internet access.. Equipment For this network 1) 140 x Cisco 2960 Access Switches 2) 1 x 4500 Core Switch 3) 1 x Cisco 2911 Router 4) 1 x ASA5500 firewall ============================== Access Switches have been configured…
-
Route Course
Hi All Could anyone recommend a training provider for the CCNP Route Course in the UK Looking to get one booked up Thanks
-
Need to Have both ISP to access internet/servers
Need to Have both ISP to access internet/servers I need help to configure a Cisco 2911 router, It has two ISP one as primary 216.140.140.0, and secondary for backup as 216.150.150.0. [FONT=Lucida Grande, Trebuchet MS, Helvetica, Arial, sans-serif]I need to be able to access both the ISP's using the same interface Gi0/1…
-
Do i need to revisit CCNA material prior.....?
hello all, first happy new year to everyone... and now on to the topic at hand. i became a CCNA in Dec of 2011, and since then was able to get a networking job, and have been working as a network admin, not doing routing/switching on a daily basis, but working with low end cisco equipment, mainly 2611xm routers, 3560…
-
Frame Ralay
Dear All, Im not sure if this has been asked before can anyone recommend some good frame relay material. I have a rather large gap in my knowledge with regards to this technology and need to tackle it :) Any feedback is greatly appreciated.
-
unable to route to secondary ip address?
We an 887m router in our office with an unmanaged switch. We have two networks, 192.168.0.x and 192.168.11.x connected to router on the same interface (192.168.11.253 is a secondary ip) but I can seem to be able to route packets from one network to the other. Internet traffic is fine from both networks. I can't see what…
-
Help configuring Voice VLANS
I have read some stuff about configuring Voice VLANS and just need to clarify some stuff. Hope you can help please. The IP phone is connected to fa0/1 and the PC is connected to the phone. If I want to create a voice vlan and have it seperate from the data I use the following commands int fa0/1 switchport mode access…
-
BGP synchronization
Nowadays BGP sync is turned off, but why do you want BGP to sync with andIGP, what will then be the use of BGP, if the IGP also knows the route?
-
EIGRP K Values
[FONT=Verdana, Arial, Helvetica, sans-serif]Hello everyone,[/FONT] [FONT=Verdana, Arial, Helvetica, sans-serif]I would like to raise a question regarding the K values of EIGRP. When manipulating the delay parameter in EIGRP most of the forums I see everyone taking off the bandwidth [ K1 ] and working only with the delay…
-
switch vpn to backup vpn on asa (configure ipsec for dual ISP on ASA )
ello, Could you help me? I Have configured VPNipsec on asa, i use 'sla monitor track' for duel ISP. Problem for me: I use two interfaces(outside for ISP1, backup FOR ISP2): 1-when outside interface is down(i i disconnec cable ) vpn switch automatically. 2-but when ISP1 is down (outside interface is up) my internet switch…
-
CISCO Advanced Firewall on 2911 router using CCP
Guys I am using a cisco 2911 router with three interfaces: Gi0/0 connected through a switch to all my servers and Gi0/2 which will connect to another server, and Gi0/1 is my outside interface connecting through a switch to two ISP's. I have webservers and Terminal servers/File Servers with 10.0.0.0 network address…
-
3rd party SFP's
Hi, I have in the past used some third party SFP's in CISCO switches with out issues, however what are other peoples experiences? I have about 50 spare LX SFP's that are mostly 3com but some other vendors as well, and am looking to purchase some cisco fiber switches that will need them. Many of the SFP's are still in there…
-
Cisco exam 642-883 (SPROUTE) CCNP-Service Provider
Hello, I will do the cisco exam 642-883 (SPROUTE). Has anybody done this exam? What kind of "labs" I have to do during the exam? Is this new exam difficult? I hope somebody can answer my question. Thank you!
-
CVOICE Materials
Ok my fellow TE members, I am in need of some help. I will be sitting my route exam on the 7th and after that I need to focus in on my cvoice. My employer and I have decided for me to go down the voice path. I work for a gold partner and I have everything at my finger tips to use for labs. Including a PSTN simulator. I am…
-
Frame Relay Interface-dlci
Can someone clarify or simply tell me if there is a mistake in the ROUTE OCG. In the EIGRP section (pg 6 it gives an example of calculating the bandwidth allocation (which is all fine) but then gives the code below: interface Serial0/0/0.20 multipoint ip address 172.16.1.1 255.255.255.240 frame-relay interface-dlci 201…
-
CCNP Route
Hi Does the CCNP route exams really extend to the configuration of any of the IPv6 tunnels ?.... This topic is eating the giant confidence in me. I hope it takes less than 5 percent :) .
-
Cat3560 Multilayer Switch inter vlan routing help!
Why doesn't this topology work? i can not seem to find it. I assigned IP addresses to each SVI on the MLS. Typed "ip routing". i wasnt sure about i have to config. a routing protocol after that,though i did. typed each network on the MLS. Set the interfaces trunk between each switch as well as the one between MLS. Set…
-
CCNP Switching- MST and PVRST config. question
I am aware that how they operate to some extent. However, i have some questions. Lets say, i built such a topology(real lab) which is consist of two Cat3560 Switch and a 2950 Switch. (connected them to each other via cat 5 copper ) In this lab, 1) My concern is during the config. of MST and PVRST, i am not sure about if i…
-
Got this POST Error yesterday, need some assistance.
I am trying to get a 3560 PoE 24 port switch to run some VoIP sets, and during POST, I got the following error message: POST:Found inline power controller write failure, inst 4 POST: Inline power test failed So, am I looking at a hardware failure or a software failure? If hardware, can a PoE injector be used on the VoIP…