-
640-802
I am currently studying for the 640-802 exam. I would rather get it over with all at once due to funds and time constraints. Currently I am using Lammle's book and cbtnuggets to study and already had some exposure to networking and to cisco ios. I haven't done any practice labs but I have played around with the packet…
-
CCNA Discovery / Exploration ?
Hi guys i'm interested with the CCNA but i'm confused about the CCNA Discovery and Exploration thing i came across. What exactly are these two and why are they mentionned ? Are they different to the 640-802 exam? i want to do a CCNA training but i'm lost quite about on what to do exactly since all i saw all these CCNA…
-
CCNA Labs...Networking for the Real World!
Saw this posted on Jeremy Cioara's blog: CCNA Labs...Networking for the Real World! | tekcert.com Sounds like a great idea to me. I know Network Warrior was a great read and these videos should be great, even for those of us that are past the CCNA.
-
Freeccnaworkbook has changed to stub area networks
Just noticed that freeccnaworkbook.com has changed to stub area networking They mention they are also going to release ccna security , ccnp route workbook and a juniper workbook http://www.stubarea.net/ The Work book formerly known as freeccnaworkbook http://www.stubarea.net/workbooks/cisco/ccna
-
What should I get to build home lab for CCNA that can also be used for CCIE?
Hi, I have not taken the CCNA yet and I have no experience but I am determined to go all the way through CCIE (routing and switching). Since I have no experience I want to build a home lab that can help me with my CCNA exam but also can be used for my CCIE lab test. I don't want to buy something for my CCNA and when I want…
-
first time connecting a console terminal: cisco 2524 router
no luck. I use #1 rj45-db9 (made one following this link: RJ45 to DB9-F Adapter CISCO,ADAPTERS,NETWORK,TELCO) #2 rollover cable (made one following this link: Cisco RJ45 RollOver cable pinout and wiring @ pinouts.ru) #3 emulator I use: hyperterminal or putty. Parameters: 9600baud/8 data bits/no parity/2 stop bits/none flow…
-
Boson Simulator Error: Command Set failed to load
I have been having this problem with the Boson Exsim that comes with the Odom book. It all works fine until you run a Simulator Question and then it throws out an error "Command set failed to load". The Simulator question loads but you can't run commands on the devices in the Question. I tried the instructions from Boson's…
-
Todd Lammle' new 7th Edition Bonus Material
If you bought my new CCNA 7th edition study guide, please email me at todd@lammle.com and I'll send you the extra bonus material and labs I wrote. Please email me your receipt for the 7th edition. Cheers! Todd Lammle
-
show Interface method "CONFIG"
Working on an ASA and show interface IP brief shows under the Method column "CONFIG" for one of the interfaces and 'manual' for the other. I don't see a difference other security inside/outside. What is the difference?
-
DNS Help
Hi, I was just wondering if someone can help me out with the DNS process. I'm not sure how much I'm supposed to know for the CCENT exam. My understanding so far. A DNS server can be local or remote. A computer requests a webpage or pings a PC by name - a DNS packet will be generated and directed to the DNS server? The DNS…
-
Need Cisco Secure ACS Server???
Need some information regarding Cisco Secure ACS Server. When I tried to download it from the cisco website it indicates that Service contract should be associated with my CISCO ID and it won't let me download it without the contract . If I need to purchase the service contract how will it cost me and can't I get the…
-
802.1x Implementation on OPNET
I am doing my masters project on 802.1x/EAP/MD5/TLS. I need some help regarding how shall I implement this in OPNET Modeler. I have already tried to implement MD5 by creating a Custom Application in Application definition as OPNET does not support the 802.1x protocol. The main part of the project is to implement EAP…
-
Bridge Layer?
Is a bridge a layer 2 device? and does it learn MAC addresses? My answer and understanding is yes to both. And Bridges seperate collision domains but the network is still one big broadcast domain?
-
ICND2 passed
Passed today with a good score. It was a hard exam folks. Beware! I guessed a fair few answers as some were dubious lol. Usual resources used were Odoms icnd2 book, CBT nuggets, train signal and lab work. Good luck to you all...!
-
Need help with CIDR
Its been a while since I have done CIDR and completely forgot when I was going over review questions. How do you CIDR an address without the subnet mask? For example if the problem was CIDR 41.220.236.8-41.220.239.11 how would you go about doing this? Another example would be CIDR 59.88.0.0-59.99.255.255. I'm completely…
-
Local CC offereing CCNA Program
I am completely new to this part of the IT world. I currently work in a global software company on the project mgmt app side. I have no experience with Cisco products, processes or technology. I was entertaining the thought of applying to a program that is being run by a community college near my home. Just looking for…
-
Hyperconf alternative?
Hello all, I have been using Hyperconf by WinAgents (free version) for my lab which is extremely handy but has a 2 device limitation. Does anyone have any alternatives that are free or lower cost? I use a Mac so either Mac or Windows will work as I can run it in Parallels if need be :) Just looking for a good manager to…
-
2650xm boot loop question
Updated the IOS on a 2650xm I have and ran into an issue where it basically loops at boot a few times, then boots to rommon. There are no errors--the router gets to the "program load complete, entry point: 0x80008000, size: 0x20fb6e8" point, then does not decompress the image. There are no errors indicating a corrupted…
-
Anybody could shed light why it poses security concern without VRF?
Intro to VRF lite - Packet Life When introducing VRF, it reads,
-
EIGRP issue
I setup a lab in PT with EIGRP protocol. I used VLSM and had two routers connected together, a switch off each router, and two pc's on each switch. I used /28 for the pc's and /30 for the router interconnection. I could ping the gateway but not the second router. I could ping one router from the other. I couldnt ping the…
-
Access Server commands, clear all lines ?
Does anyone know of a command that will clear all console lines on an access server ? instead of individually inputting clear line 1, clear line 2, etc and so on ... preferably something I can put in the config upon boot, it automatically clears the lines for me ?
-
MAC Broadcast
Hi Guys, just a quick query regarding ARP's. I understand that when an arp request goes out to find a mac address that the Ethernet frame is 255.255.255.255 and the MAC address is FFFF.FFFF.FFFF. But I was just wondering. Is their another MAC address included with this frame for the actual recipient? I suppose their must…
-
Resources
Hi guys, Passed my CCNA yesterday. I am thinking I should look at doing this next. I have an old CCNP ISCW book and was wondering whether I could use that for this. Is this a suitable idea or should I buy the OCG? Cheers
-
Can I start with just 2 routers
Hello Ive taken CCNA classes years ago and been in IT for about 10 years, mostly telecom and tech support/NOC type environments. I want to put together a home lab. I know you need routers and switchs but Im thinking being that the finances are super tight can I just get 2 routers to start with and use packet Tracer for the…
-
Advice - Where should I start?
Hello community, It's been awhile since I posted here, but let me get to the core issue. So I recently graduate with a bachelor of technical management and I need to get into Cisco certifications. I understand the basic core concepts of networking/database and components, most of the work I've done in college was…
-
Failed ICND1
Hey guys, I prepared for this exam a few weeks but I failed miserably the ICND1 with 750 on my first attempt.I feel gutted, I found the simulations pretty straight forward and I thought I was going to make it, I don't know if I should take it again, I'm confused...
-
Need help w/ 3 router lab
I have 2x2610XM's w/ DCE/DTE cables going into a WIC-1T and 2x2950's. I set them up while watching the cbt nuggets, had everything working happily. Then I bought a 3rd router, a 2610 and a Serial 4A/S to go in it. I removed all previous routing - static and RIPv2...and re addressed the interfaces so I had 3 Routers - one…
-
Router on a Stick vs Secondary Ip Address
I know that these do basically the same thing, except you can do more than to vlan's with a router on a stick. Is there any difference in productivity or anything between the two?
-
ssh client in your web browser - gateone
For those who want a nice easy to use ssh client (though the install isn't the simplest) https://github.com/liftoff/GateOne http://vimeo.com/24857127 works nicely! only works with latest firefox and chrome versions – not ie due use of web sockets
-
Which Show command shows you the "clock rate"?
I use the Show controller to see DTE or DCE but I can't find the Show command that tells you if the clock rate has been set to the serial port. Thx. I'm working on a lab and Router 1 and Router two are not pinging each others. Serial1/1 172.22.2.2 YES unset up down I checked the clock rate, RIP2 is on, not sure where else…
-
CCNA SP Operations 640-760
Has anyone else taken a look at the blueprint for this new exam? Looks a pretty interesting. The blueprint states that it has some scripting, unix, and ITIL related info also. Blueprint: https://learningnetwork.cisco.com/docs/DOC-7440
-
Old CCNA: Security?
I have been looking for an older test that would be comparable to the CCNA:S test. All of the information I have been able to find is for the CCSP. Is this a completely new certification?
-
Default routing using GNS3
Hello guys, I have this topology and at the moment i am trying to configure my Router so I can talk to the internet. In this topology, I want to use my physical router, which is 192.168.1.1 to be my last resort for the routing. Can I do that? I want to be able to ping http://www.google.com.. Well, at first I want to be…
-
Cisco Anytime Connect 3.0 on IOS router not ASA?
We are looking at changing VPN solutions (currently have a IPSEC vpn which is handled by the IOS in the cisco router) however now the company is using more 64bit machines this is an issue with the cisco vpn client, Now looking around the cisco vpn client is superseded by cisco anytime connect, now version 2.5 does not…
-
IPv6 interface ID on serial connections
Hi guys, I've just read a chapter on IPv6 and was wondering how a serial interface gets an interface ID. From what I understood, this is part of autoconfiguration which uses EUI-64 where a MAC address gets padded with FFFE. I thought that only Ethernet has MAC addresses so how does this address get created?
-
CCNA Security -Need Project help
I am doing a project based on network security which involves both layer 2 and 3 devices. I want to show AAA (Radius/TACACS+) config,to avoid Mac Spoofing attacks, to avoid CAM Overflow attacks. I want to implement this in WLAN. I have already started with these topics and need some help on implementation. I want to build…
-
How do network cards work?
My question is "How do network cards work?" Here's what I think I know. Am I wrong anywhere and am I missing anything? It is the network driver that performs LLC to basically flag a packet/datagram as being IP/IPX/etc..., right? So LLC is performed in software on the host device? How does the operating system hand off an…
-
Switched Ethernet - Physical vs. Logical Topology
I am studying the data link layer. If I have a switch set up to service 10 computers, I believe my physical topology would be a star but the logical topology would be point-to-point. Is this correct? My reasoning for physical star is because each computer is plugged into a different switch port in a star arrangement. My…
-
Passed ICND1 this morning!
Hey all, I just took the ICND1 exam this morning and passed with an 899. The exam was much easier than I thought. I only needed to use a few show commands. I used the ICND1 Official Study Guide from Cisco as well as the Boson Exam Environment that was included with the book. I personally believe if you can master that book…
-
640-864 - Updated study material
Now that the new test (640-864) has been out for some time I am interested in an updated study resource list. "Books" - "Training Videos" - "Testing software" Has anyone heard whether Diane Teare is going to update her book(s) anytime soon? Her old book is still listed on Amazon even though it is now outdated. Is it still…
-
Should a router need to know VLAN information?
http://www.dell.com/downloads/global/products/pwcnt/en/app_note_38.pdf As instructed above when using a router to do inter-VLAN routing, we need to configure VLANs on the router as on switches. This does not sound very elegant. If a router needs to know VLAN, then it's not a layer 3 device, rather than a hybrid of L2 &…
-
CDP is not enabled..
Ok so I'm practicing on Packet Tracer and I'm trying to do a "show cdp neighbor details" and the output is "CDP is not enabled'. What am I missing here? thx.
-
Lab setup - switching between multiple serial devices
HI, I figure this has to be a common question for lab setups. What do you use to swithc between say 4 or 5 serial devices when they have no ip connectivity at first setup. Is there a serial hub type devcie you can connect all the routers/switches to and then connect that to your PC? If you use such a device and it works…
-
alias exec
So I could be completely sleeping here but I'm using Packet Tracer and would love to give the alias exec command a try but it's not recognized in the routers or the switches. I googled and couldn't find any definitive info either. Is this command missing in Packet Tracer or was the command wiped from the IOS?
-
How Can download Packet Tracer
How Can I download Packet Tracer 5.3 if I can't get membership or I am not enrolled in the Network Academy. I just want use Packet Tracer to do Labs. I have looked at GN3 but it requires an IOS and that is a bit much. :
-
Exam scoring for ICND2
Can anyone confirm if that Sims count for more than other drag/drop or multiple choice questions? I'm just curious how that works.
-
poin to point connection
'In an enterprise network, static routes configured with exit interfaces are ideal for point-to-point connections like those between a border router and the ISP' What does poin to point connection mean in the context above?
-
Packet Tracer Can Be So Cruel Sometimes
Wow! I have to say I'm thankful for having my real labs just in case. I was working on Dynamic NAT with PAT overloading, and I tried configuring them in Packet Tracer. Although the pings were successful, but when I check the router that was performing the translation, the show ip nat statistics command was telling me that…
-
Failed ICND2
Didn't even come close [678]. I got destroyed by a switch config sim where I just kind of locked up and felt pressure from the clock the entire time. After a few commands didn't work and I still had 10 questions and 10 min left I panicked and skipped it all together. I fought the clock the entire time and felt like the…
-
Got my first IT cert. ICND1! ;)
Been working IT for 10 years now and decided to dive into the world of cisco certs. I took the ICND1 twice. First score 787 ;( Two weeks later, second score 837 ;) It feels great to finally get a certification especially a Cisco one. Been a Network Engineer for over 4 years now. It certainly helps to have hands-on…
-
Practice tests
What practice tests are people using for this? Any free ones? Are the end of chapter questions enough in the self-study guide? I just scheduled the test for Nov. 7 and I'm starting to get nervous.
-
Passed ICND1 Today!
Taking this today was interesting. I think I nearly cried when I saw congratulations, thinking to myself that I studied pretty hard to get through this. That and the fact that I can FINALLY concentrate on my other classes. Nice to have this one under my belt. ICND 2 here we go!
-
Anybody can shed light why it poses security concern without VRF?
Intro to VRF lite - Packet Life When introducing VRF, it reads,
-
static routing basic help, cisco packet tracer
a very basic problem i am not able to sort out i have 3 router R1, R2 and R3 connected together in series , i am confused how to connect them through Static routing, here is what i have done but not working R1 = Network = 10.0.0.0 Mask = 255.0.0.0 Next Hop = 10.0.0.2 Serial2/0 Ip address = 10.0.0.1 Subnet Mast = 255.0.0.0…
-
CCNA SP Operations passed today
Hi All, I cleared this exam today. 70 questions, passing score: 811. I received: 836 - and I am not proud of that - but - pass is a pass. My few cents: 1.) Don't use brain **** flowing arund the Internet. They consist lots of incorrect answeres. 2.) Do read all the documents suggested here: -…
-
EIGRP, strange Costs GNS3
These GNS3 Emulated EIGRP route costs do not make sense to me as they seam inefficient. Are these costs correct and how would I optimize this routing setup? Why would the R3 to R4 network not be accessed through the faster left network? Update: R1-R6 is 100M and R1-R2-R3 also has faster 8M links, but eigrp still only lists…
-
subnetting issues
Hey guys :) , My name is jake and I'm new here .. have visited a few times earlier and now joined a few minutes back.. After having failed miserably at understanding sub-netting earlier, I decided that Id give it another go and so have been practicing some questions .. I can get the majority of them right but still have a…
-
How did they get the answer for what is the last valid ip address?
Ok, working again with subnettingquestions.com and also using the subnetting calculator from this website and I'm not sure how they are getting this answer of: Network Address: 172.31.216.0 Broadcast Address: 172.31.223.225 Valid Host Range: 172.31.216.1 - 172.31.223.254 What is the last valid host on the subnetwork IP…
-
Sitting the 640-802 on Saturday!!
Had a setback due to life over the summer but over the last month or so I have hit the books hard for the test and it is booked for Saturday. Wish me luck!! My nerves are a wreck... ??:
-
Please delete
Delete please
-
Finally CCNA!
Just passed the ICND2 test earlier today. 902, the same score I got on the ICND1 test. Failed the test with a 790 a few weeks back. I guess the big question is what do I start working on now? I am having a hard time deciding between CCNP-Switch and CCNA:Security, or an MCP test. All three of the certifications seem like…
-
Question about the CCENT
Do they ask you about the cisco discovery protocol?
-
Hyperterminal replacement for Win 7 and USB to Serial console connection
All: Sorry if this is a stupid question, but I am trying to connect into my 2620XM router via the console cable from a Windows 7 laptop with the USB to serial connection. I have downloaded a couple of freebie terminal emulators and I cannot seem to find one that will allow a serial connection using the USB port? They all…
-
I shoulda done this crap years ago.
I have maintained PC's since the days of DIP switches and home networking since 1998 and never got any certifications. I am now getting ready to graduate with degrees in Telecomm and Electronics. I decided to make myself more marketable and got Net+ certified and found out I could have done it sooner and had one for life,…
-
Passed CCENT and going for CCNA,Juniper,CCNP
Hello everyone, I am so happy to be a member of this community. I learnt a lot from here. I really appreciate your help. I did learn a lot :) I passed CCENT and will go for CCNA in 2 months. Also I aim to take the first level of Juniper certf. and then go for CCNP in 1 year. I am studying computer science and have a lab at…
-
Passed today!
I passed CCNA Security this morning. 977. I'd mostly say the test is a joke when compared to CCNA. Wasn't hard at all, a lot of questions only had 1 answer that was right, the sim was super easy. So CCNA and CCNA Security in 3 months, not bad. Now onto finish my BSIT then probably CCNA Wireless/Voice followed by CCNP.
-
Common Cisco Devices tested on ICND1
Hi All, can anyone tell me the commonly tested router devices in ICND1 please, thanks in advance, and do I need to know the specs of these devices. Thanks again
-
ICND2 Test :)
Hi folks, Well I just want you to know that next Thursday I will take the ICND2 test to get my CCNA cert.... Wish me luck, I´ve been studying for almost 2.5 months, and I feel that it is much harder than ICND1. There are more commands and terms... Bless....
-
When to sit CCENT Exam
Hi All, I am hoping to sit for my CCENT exam shortly but it has been years since I last sat for an exam I don't know if I am ready. So far I have done the following * Watched CBT Nuggets with Jeremy Cioara * Attended the official Interconnecting Cisco Networking Devices through a Course Provider * Practiced and confident…
-
Passed ICND1!!
Thank you TE, your support has been awesome! scored an 874/1000, not the greatest score in the world, but as I have learned that the score doesn't mean anything, the only thing that matters is the pass! I knew I was going to pass 30 minutes in, I felt really prepared for the exam even though I sweating bullets prior to…
-
huh...
This doesn't really have anything to do with CCNA directly, but i'm reading through odems icnd2 book and he must have been watching a baseball game because he named the PC's "koufax" and "clemens" and the routers between them "LA" and "Boston". I'm a pretty big baseball fan and thought this was funny considering he usually…
-
Configure and apply an acl to limit telnet and SSH access to the router
This should be an easy one. I understand how to create the acl and apply the acl using access-class on the vty lines. Does putting it on the vty lines take care of ssh as well?
-
Pinging a host over a router
This is kind of a stupid question. I have 2 hosts and I want to be able to ping each other. According to this image, what else do I need to add in?
-
This makes no sesne, how did they get this answer for hosts?
From subnettingquestions.com If you convert the following to binary: 255.255.0.0 11111111.11111111.00000000.00000000255.255.255.128 11111111.11111111.11111111.10000000 It is my understanding that you take the bits where they don't match up from the default subnet mask and the prefix notation and use that to get the subnets…
-
Client's forwarding VTP summary messages to VTP servers
I am using PT and setup a switch-A with a few vlans and a domain name. I then changed the VTP mode on switch-a to "client". I then connected a new switch-B to switch-A. Switch-B by default is a VTP server.I enabled vtp debugging on switch-B this is what it said VTP LOG RUNTIME: Summary packet rev 5 equal to domain polar…
-
EIGRP Feasible Distance & Successor
Greetings All, I'm having some difficulty understanding the difference between Feasible Distance and Successor. My current understanding is that both FD and Successor are the best route to a remote network, if that is the case, then what is the difference? Any help would be GREATLY appreciated. Thank you for you knowledge.
-
I'm a CCNA!!!!
I did it! FINALLY. Passed ICND2 today and it feels great. I could've done a little better actually but I've been super-tired lately between my jobs and this, and every other stress... but it says 'Pass' so I'm in there! Updated my profile and that felt good too..lol. Gonna take a short micro-break, then move on to The…
-
How to figure what subnet mask to use?
From subnetting.org Q: Question: You need to divide the 172.24.0.0 network into 600 subnets with 50 hosts per subnet. What subnet mask should you use? A: 255.255.255.192 (/26) I understand how to get the subnet, however for the subnet mask, I'm not sure where to begin. I'm also aware of the following table listed below,…
-
Passed ICND1
Passed with 887. It seemed easier than I thought it would be after the horror stories I read on here. ICND2 in 2 weeks...
-
Tom Lammle CCNA 7th Edition
Hi Guys, Going for the ICND1 - If anyone has read this PDF, what chapters should I focus on first for the ICND1? The PDF is for the complete CCNA exam. Thanks !
-
CCNA Info
How many folks in here pursued their CCNA successfully and never had any experience? And how long did you study for prior to taking the exams?
-
ICND1 Passed!
All I can say is wow. The last certification I took was in 1999 for MCSE Windows NT 4.0 and it was cake compared to this. I must say this was the toughest test I've taken so far. Not because of content but just because of how nervous I was. Note to self, do not put any more pressure on yourself than there already is! :) I…
-
SSH into 2691 router using QEMU in GNS3
hey guys, I'm struggling to SSH into my the router using GNS3. Here's some snapshot that I took for easy understanding. It is not prompting for the username. R3#show run Building configuration... Current configuration : 833 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no…
-
General home network question
I have my laptop and a PC on my network. I'm using a regular home Linksys (Cisco) wireless router with 4 wired ports. I normally keep my Wifi enabled on my laptop, but when I'm home I usually plug in the network cable... but also often forget to turn off the Wifi access. I was copying files from a folder on my PC to my…
-
What Show command will show you DCE and Neighbors IP address?
I'm working to solve a Boson simulation question and I noticed both R1 and R2 have "Status up" but "Protocols down" Three questions... I'm having trouble finding which Show command will tell you if the router you're logged in is the DCE router (where you have to set the clock rate). Is the command "sh interface"? Also, is…
-
NAT problem
hi im studying now NAT, and i have a problem which i just cant figure it out, i configured dynamic NAT with an access list and when i pingthe host on which i configured NAT from the router i see that its using the NAT address, but i cant ping other hosts from that host on which i configured NAT, this is my configuration…
-
Unable to set an IP address on subinterfaces
I'm trying to setup a router-on-a-stick config in my practice lab but for some reason I'm unable to configure the subinterface as part of an 802.1q. I know that I have to type encapsulation dot1q and the associated vlan but the command is detected as invalid. When I use the help command, encapsulation is not even included…
-
Traceroute question
Guys, what does this mean when it shows the !A * !A ? I'm trying to traceroute an MPLS link and this is all I get. AR#traceroute 192.168.105.10 Type escape sequence to abort. Tracing the route to 192.168.105.10 1 192.168.105.10 !A * !A AR#
-
Issue with Packet Tracer and running certain commands
Greetings, I'm using Packet Tracer v5.3.1 with IOS v12.2. I am trying to set a MOTD on 2960 Switch and also set it up for SSH, am I not able to do this for a Cisco switch? I tried doing this on a 2811 router and it worked fine. Here are the commands: cisco_sw1#conf tEnter configuration commands, one per line. End with…
-
ICND2 Failed
Wow what a humiliating and embarrassing experience the ICND2 exam was. Maybe I am a wannabe like a previous poster stated or I just like taking expensive practice tests Some background information for you... I have been working in IT over 10 years, primarily in the helpdesk doing network support specifically with Cisco…
-
advise
Going to take the CCNA tomorrow failed the ICND2 exam on Thursday with 760 am I crazy? I made a 890 on ICND1 and have studied hard since then.
-
Voice VLAN Configuration Questions.
Does the commands switchport voice vlan vlan-id and switchport voice vlan dot1p override each other? Here's the command descriptions • vlan-id—Configure the phone to forward all voice traffic through the specified VLAN. By default, the Cisco IP Phone forwards the voice traffic with an IEEE 802.1Q priority of 5. Valid VLAN…
-
ICND2 Passed!
Passed ICND2 today with an 888. Used the ICND2 cisco press book, Lammle's book, cisco netacad, the boson exsim max, and of course Techexams. I went in more nervous than ICND1 for some reason and thought i was going to have a heart attack after hitting next after the final question.
-
Vlan Security
Okay ladies and gents I need your expertise. I am looking for a way to block one department on one vlan to another vlan based off Active DIrectory groups and then give access to one vlan for one department to another deparment based off t heir ad groups. I know can used Triple AAA and some ACL to do this but anyone have…
-
Taking ICND1 Tomorrow.. Sim question.
Hey All, Doing my final preparations tonight for my ICND1 test tomorrow. Quick question. Are the majority of the questions in Multiple Choice / Select All That apply form? How many Sims should I expect and how much time should I spend on each of them? Are they worth more than the Multiple Choice type questions? Thanks!
-
Finally - CCNA
Well, just took the test today. I was very happy to see that my knowledge of the systems and theory paid off. I took the 816 ICND2 - passed with 986/1000. Very excited, finally achieved my last goal I had set infront of me while in Iraq. Appreciate the help I get here and hope to do the same. Good luck to everyone else on…
-
Failed ICND2 :(
Welp, so far, I've failed one of each test... the composite, the ICND1 (but passed that 2nd time) and now the ICND2. Has anyone else done this? I dunno... this whole process has been the most difficult thing ever. Maybe it's that I'm putting too much pressure on myself time-wise and out of necessity I guess. I had a unique…
-
Vlan Blocking based off AD Groups
Okay ladies and gents I need your expertise. I am looking for a way to block one department on one vlan to another vlan based off Active DIrectory groups and then give access to one vlan for one department to another deparment based off t heir ad groups. I know can used Triple AAA and some ACL to do this but anyone have…
-
Passed CCENT today !
Hi, Just passed the CCENT today, I've been studying on and off for a couple of years. Finally got my act together and took the exam. Took the exam at East ham College Campus on the Wirrel - UK Was my first Cisco exam so was pretty nervous, I had 30 mins to spare on the last question which was a sim of 4 questions. After…
-
Site-to-Site VPN issues have me befuddled!!!!!!!!
I always seem to do things the most difficult way and have been banging my head for several days with this. Scenario: I have set up a site-to-site VPN from my office router (c2821 w/ IOS 15.1(3)T ) to a remote router (c2621XM w/ 12.4(25b) ) both advEnt-k9 images. I am able to ping the interesting remote private networks…